diff options
author | Petr Mladek <pmladek@suse.cz> | 2014-09-19 19:32:23 +0400 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2014-09-24 09:33:19 +0400 |
commit | 37ebb54915dc42944f6ae92fe53b9531c3903801 (patch) | |
tree | 5e81856de30454af836ff583ec96e3a34591c312 /drivers/usb/core | |
parent | 59d48b3f1fdf307115af38b91c3ea4ddb57b73a2 (diff) | |
download | linux-37ebb54915dc42944f6ae92fe53b9531c3903801.tar.xz |
usb: hub: rename khubd to hub_wq in documentation and comments
USB hub has started to use a workqueue instead of kthread. Let's update
the documentation and comments here and there.
This patch mostly just replaces "khubd" with "hub_wq". There are only few
exceptions where the whole sentence was updated. These more complicated
changes can be found in the following files:
Documentation/usb/hotplug.txt
drivers/net/usb/usbnet.c
drivers/usb/core/hcd.c
drivers/usb/host/ohci-hcd.c
drivers/usb/host/xhci.c
Signed-off-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/core')
-rw-r--r-- | drivers/usb/core/hcd.c | 10 | ||||
-rw-r--r-- | drivers/usb/core/hub.c | 44 |
2 files changed, 27 insertions, 27 deletions
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 761ccf02d7a0..d3fe161bec05 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2301,7 +2301,7 @@ EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); * Context: in_interrupt() * * Starts enumeration, with an immediate reset followed later by - * khubd identifying and possibly configuring the device. + * hub_wq identifying and possibly configuring the device. * This is needed by OTG controller drivers, where it helps meet * HNP protocol timing requirements for starting a port reset. * @@ -2320,7 +2320,7 @@ int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num) if (port_num && hcd->driver->start_port_reset) status = hcd->driver->start_port_reset(hcd, port_num); - /* run khubd shortly after (first) root port reset finishes; + /* allocate hub_wq shortly after (first) root port reset finishes; * it may issue others, until at least 50 msecs have passed. */ if (status == 0) @@ -2383,7 +2383,7 @@ void usb_hc_died (struct usb_hcd *hcd) if (hcd->rh_registered) { clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); - /* make khubd clean up old urbs and devices */ + /* make hub_wq clean up old urbs and devices */ usb_set_device_state (hcd->self.root_hub, USB_STATE_NOTATTACHED); usb_kick_hub_wq(hcd->self.root_hub); @@ -2393,7 +2393,7 @@ void usb_hc_died (struct usb_hcd *hcd) if (hcd->rh_registered) { clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); - /* make khubd clean up old urbs and devices */ + /* make hub_wq clean up old urbs and devices */ usb_set_device_state(hcd->self.root_hub, USB_STATE_NOTATTACHED); usb_kick_hub_wq(hcd->self.root_hub); @@ -2655,7 +2655,7 @@ int usb_add_hcd(struct usb_hcd *hcd, set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); /* HC is in reset state, but accessible. Now do the one-time init, - * bottom up so that hcds can customize the root hubs before khubd + * bottom up so that hcds can customize the root hubs before hub_wq * starts talking to them. (Note, bus id is assigned early too.) */ if ((retval = hcd_buffer_create(hcd)) != 0) { diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 9b01ab2bbe7d..12a4c67667b1 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -652,7 +652,7 @@ static void hub_irq(struct urb *urb) hub->error = status; /* FALL THROUGH */ - /* let khubd handle things */ + /* let hub_wq handle things */ case 0: /* we got data: port status changed */ bits = 0; for (i = 0; i < urb->actual_length; ++i) @@ -664,7 +664,7 @@ static void hub_irq(struct urb *urb) hub->nerrors = 0; - /* Something happened, let khubd figure it out */ + /* Something happened, let hub_wq figure it out */ kick_hub_wq(hub); resubmit: @@ -695,7 +695,7 @@ hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt) } /* - * enumeration blocks khubd for a long time. we use keventd instead, since + * enumeration blocks hub_wq for a long time. we use keventd instead, since * long blocking there is the exception, not the rule. accordingly, HCDs * talking to TTs must queue control transfers (not just bulk and iso), so * both can talk to the same hub concurrently. @@ -961,7 +961,7 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) /* * Disable a port and mark a logical connect-change event, so that some - * time later khubd will disconnect() any existing usb_device on the port + * time later hub_wq will disconnect() any existing usb_device on the port * and will re-enumerate if there actually is a device attached. */ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1) @@ -974,7 +974,7 @@ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1) * - SRP saves power that way * - ... new call, TBD ... * That's easy if this hub can switch power per-port, and - * khubd reactivates the port later (timer, SRP, etc). + * hub_wq reactivates the port later (timer, SRP, etc). * Powerdown must be optional, because of reset/DFU. */ @@ -987,7 +987,7 @@ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1) * @udev: device to be disabled and removed * Context: @udev locked, must be able to sleep. * - * After @udev's port has been disabled, khubd is notified and it will + * After @udev's port has been disabled, hub_wq is notified and it will * see that the device has been disconnected. When the device is * physically unplugged and something is plugged in, the events will * be received and processed normally. @@ -1107,7 +1107,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) init2: /* - * Check each port and set hub->change_bits to let khubd know + * Check each port and set hub->change_bits to let hub_wq know * which ports need attention. */ for (port1 = 1; port1 <= hdev->maxchild; ++port1) { @@ -1174,7 +1174,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) clear_bit(port1, hub->removed_bits); if (!udev || udev->state == USB_STATE_NOTATTACHED) { - /* Tell khubd to disconnect the device or + /* Tell hub_wq to disconnect the device or * check for a new connection */ if (udev || (portstatus & USB_PORT_STAT_CONNECTION) || @@ -1187,7 +1187,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) USB_SS_PORT_LS_U0; /* The power session apparently survived the resume. * If there was an overcurrent or suspend change - * (i.e., remote wakeup request), have khubd + * (i.e., remote wakeup request), have hub_wq * take care of it. Look at the port link state * for USB 3.0 hubs, since they don't have a suspend * change bit, and they don't set the port link change @@ -1208,7 +1208,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) set_bit(port1, hub->change_bits); } else { - /* The power session is gone; tell khubd */ + /* The power session is gone; tell hub_wq */ usb_set_device_state(udev, USB_STATE_NOTATTACHED); set_bit(port1, hub->change_bits); } @@ -1216,10 +1216,10 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* If no port-status-change flags were set, we don't need any * debouncing. If flags were set we can try to debounce the - * ports all at once right now, instead of letting khubd do them + * ports all at once right now, instead of letting hub_wq do them * one at a time later on. * - * If any port-status changes do occur during this delay, khubd + * If any port-status changes do occur during this delay, hub_wq * will see them later and handle them normally. */ if (need_debounce_delay) { @@ -1280,7 +1280,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) cancel_delayed_work_sync(&hub->init_work); - /* khubd and related activity won't re-trigger */ + /* hub_wq and related activity won't re-trigger */ hub->quiescing = 1; if (type != HUB_SUSPEND) { @@ -1291,7 +1291,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) } } - /* Stop khubd and related activity */ + /* Stop hub_wq and related activity */ usb_kill_urb(hub->urb); if (hub->has_indicators) cancel_delayed_work_sync(&hub->leds); @@ -1613,7 +1613,7 @@ static int hub_configure(struct usb_hub *hub, if (ret < 0) goto fail; - /* Update the HCD's internal representation of this hub before khubd + /* Update the HCD's internal representation of this hub before hub_wq * starts getting port status changes for devices under the hub. */ if (hcd->driver->update_hub_device) { @@ -2045,7 +2045,7 @@ static void choose_devnum(struct usb_device *udev) int devnum; struct usb_bus *bus = udev->bus; - /* If khubd ever becomes multithreaded, this will need a lock */ + /* If hub_wq ever becomes multithreaded, this will need a lock */ if (udev->wusb) { devnum = udev->portnum + 1; BUG_ON(test_bit(devnum, bus->devmap.devicemap)); @@ -3074,7 +3074,7 @@ static unsigned wakeup_enabled_descendants(struct usb_device *udev) * Once VBUS drop breaks the circuit, the port it's using has to go through * normal re-enumeration procedures, starting with enabling VBUS power. * Other than re-initializing the hub (plug/unplug, except for root hubs), - * Linux (2.6) currently has NO mechanisms to initiate that: no khubd + * Linux (2.6) currently has NO mechanisms to initiate that: no hub_wq * timer, no SRP, no requests through sysfs. * * If Runtime PM isn't enabled or used, non-SuperSpeed devices may not get @@ -3216,7 +3216,7 @@ static int finish_port_resume(struct usb_device *udev) /* usb ch9 identifies four variants of SUSPENDED, based on what * state the device resumes to. Linux currently won't see the * first two on the host side; they'd be inside hub_port_init() - * during many timeouts, but khubd can't suspend until later. + * during many timeouts, but hub_wq can't suspend until later. */ usb_set_device_state(udev, udev->actconfig ? USB_STATE_CONFIGURED @@ -3581,7 +3581,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) dev_dbg(&intf->dev, "%s\n", __func__); - /* stop khubd and related activity */ + /* stop hub_wq and related activity */ hub_quiesce(hub, HUB_SUSPEND); return 0; } @@ -4977,10 +4977,10 @@ static void port_event(struct usb_hub *hub, int port1) * On disconnect USB3 protocol ports transit from U0 to * SS.Inactive to Rx.Detect. If this happens a warm- * reset is not needed, but a (re)connect may happen - * before khubd runs and sees the disconnect, and the + * before hub_wq runs and sees the disconnect, and the * device may be an unknown state. * - * If the port went through SS.Inactive without khubd + * If the port went through SS.Inactive without hub_wq * seeing it the C_LINK_STATE change flag will be set, * and we reset the dev to put it in a known state. */ @@ -5290,7 +5290,7 @@ static int descriptors_changed(struct usb_device *udev, * former operating configuration. If the reset fails, or the device's * descriptors change from their values before the reset, or the original * configuration and altsettings cannot be restored, a flag will be set - * telling khubd to pretend the device has been disconnected and then + * telling hub_wq to pretend the device has been disconnected and then * re-connected. All drivers will be unbound, and the device will be * re-enumerated and probed all over again. * |