diff options
| author | Biju Das <biju.das.jz@bp.renesas.com> | 2023-04-12 17:50:51 +0300 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2023-04-20 14:47:33 +0300 |
| commit | 1707ce2d1e4d701db28ba2250d9d72dcf762babc (patch) | |
| tree | fb28979544a24a1a3c9042dd295757b17bb89867 /drivers/tty | |
| parent | cf383d123869574d1de4304ed73771d3eb5a3d40 (diff) | |
| download | linux-1707ce2d1e4d701db28ba2250d9d72dcf762babc.tar.xz | |
tty: serial: sh-sci: Fix TE setting on SCI IP
As per the RZ/G2L users hardware manual (Rev.1.20 Sep, 2022), section
23.3.7 Serial Data Transmission (Asynchronous Mode) it is mentioned
that the TE (transmit enable) must be set after setting TIE (transmit
interrupt enable) or these 2 bits are set to 1 simultaneously by a
single instruction. So set these 2 bits in single instruction.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230412145053.114847-4-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/sh-sci.c | 19 |
1 files changed, 17 insertions, 2 deletions
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 15743c2f3d3d..32f5c1f7d697 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -601,6 +601,15 @@ static void sci_start_tx(struct uart_port *port) port->type == PORT_SCIFA || port->type == PORT_SCIFB) { /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ ctrl = serial_port_in(port, SCSCR); + + /* + * For SCI, TE (transmit enable) must be set after setting TIE + * (transmit interrupt enable) or in the same instruction to start + * the transmit process. + */ + if (port->type == PORT_SCI) + ctrl |= SCSCR_TE; + serial_port_out(port, SCSCR, ctrl | SCSCR_TIE); } } @@ -2600,8 +2609,14 @@ done: sci_set_mctrl(port, port->mctrl); } - scr_val |= SCSCR_RE | SCSCR_TE | - (s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0)); + /* + * For SCI, TE (transmit enable) must be set after setting TIE + * (transmit interrupt enable) or in the same instruction to + * start the transmitting process. So skip setting TE here for SCI. + */ + if (port->type != PORT_SCI) + scr_val |= SCSCR_TE; + scr_val |= SCSCR_RE | (s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0)); serial_port_out(port, SCSCR, scr_val | s->hscif_tot); if ((srr + 1 == 5) && (port->type == PORT_SCIFA || port->type == PORT_SCIFB)) { |