Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (26 commits)
  amba pl011: workaround for uart registers lockup
  n_gsm: fix the wrong FCS handling
  pch_uart: add missing comment about OKI ML7223
  pch_uart: Add MSI support
  tty: fix "IRQ45: nobody cared"
  PTI feature to allow user to name and mark masterchannel request.
  0 for o PTI Makefile bug.
  tty: serial: samsung.c remove legacy PM code.
  SERIAL: SC26xx: Fix link error.
  serial: mrst_max3110: initialize waitqueue earlier
  mrst_max3110: Change max missing message priority.
  tty: s5pv210: Add delay loop on fifo reset function for UART
  tty/serial: Fix XSCALE serial ports, e.g. ce4100
  serial: bfin_5xx: fix off-by-one with resource size
  drivers/tty: use printk_ratelimited() instead of printk_ratelimit()
  tty: n_gsm: Added refcount usage to gsm_mux and gsm_dlci structs
  tty: n_gsm: Add raw-ip support
  tty: n_gsm: expose gsmtty device nodes at ldisc open time
  pch_phub: Fix register miss-setting issue
  serial: 8250, increase PASS_LIMIT
  ...

11 files changed, 591 insertions, 56 deletions

diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index ba679ce0a774..d15a071b1a54 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -44,6 +44,7 @@
 #include <linux/init.h>
 #include <linux/bitops.h>
 #include <linux/slab.h>
+#include <linux/ratelimit.h>
 
 #include <asm/system.h>
 #include <asm/io.h>
@@ -242,8 +243,8 @@ static void moxa_wait_finish(void __iomem *ofsAddr)
 	while (readw(ofsAddr + FuncCode) != 0)
 		if (time_after(jiffies, end))
 			return;
-	if (readw(ofsAddr + FuncCode) != 0 && printk_ratelimit())
-		printk(KERN_WARNING "moxa function expired\n");
+	if (readw(ofsAddr + FuncCode) != 0)
+		printk_ratelimited(KERN_WARNING "moxa function expired\n");
 }
 
 static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg)
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index d188f378684d..7fc8c02fea6c 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -39,6 +39,7 @@
 #include <linux/pci.h>
 #include <linux/bitops.h>
 #include <linux/slab.h>
+#include <linux/ratelimit.h>
 
 #include <asm/system.h>
 #include <asm/io.h>
@@ -1490,8 +1491,7 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
 
 	switch (cmd) {
 	case MOXA_GET_MAJOR:
-		if (printk_ratelimit())
-			printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl "
+		printk_ratelimited(KERN_WARNING "mxser: '%s' uses deprecated ioctl "
 					"%x (GET_MAJOR), fix your userspace\n",
 					current->comm, cmd);
 		return put_user(ttymajor, (int __user *)argp);
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 19b4ae052af8..8a50e4eebf18 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -58,6 +58,10 @@
 #include <linux/serial.h>
 #include <linux/kfifo.h>
 #include <linux/skbuff.h>
+#include <net/arp.h>
+#include <linux/ip.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
 #include <linux/gsmmux.h>
 
 static int debug;
@@ -77,8 +81,24 @@ module_param(debug, int, 0600);
  * Semi-arbitrary buffer size limits. 0710 is normally run with 32-64 byte
  * limits so this is plenty
  */
-#define MAX_MRU 512
-#define MAX_MTU 512
+#define MAX_MRU 1500
+#define MAX_MTU 1500
+#define	GSM_NET_TX_TIMEOUT (HZ*10)
+
+/**
+ *	struct gsm_mux_net	-	network interface
+ *	@struct gsm_dlci* dlci
+ *	@struct net_device_stats stats;
+ *
+ *	Created when net interface is initialized.
+ **/
+struct gsm_mux_net {
+	struct kref ref;
+	struct gsm_dlci *dlci;
+	struct net_device_stats stats;
+};
+
+#define STATS(net) (((struct gsm_mux_net *)netdev_priv(net))->stats)
 
 /*
  *	Each block of data we have queued to go out is in the form of
@@ -113,6 +133,8 @@ struct gsm_dlci {
 #define DLCI_OPENING		1	/* Sending SABM not seen UA */
 #define DLCI_OPEN		2	/* SABM/UA complete */
 #define DLCI_CLOSING		3	/* Sending DISC not seen UA/DM */
+	struct kref ref;		/* freed from port or mux close */
+	struct mutex mutex;
 
 	/* Link layer */
 	spinlock_t lock;	/* Protects the internal state */
@@ -123,6 +145,7 @@ struct gsm_dlci {
 	struct kfifo *fifo;	/* Queue fifo for the DLCI */
 	struct kfifo _fifo;	/* For new fifo API porting only */
 	int adaption;		/* Adaption layer in use */
+	int prev_adaption;
 	u32 modem_rx;		/* Our incoming virtual modem lines */
 	u32 modem_tx;		/* Our outgoing modem lines */
 	int dead;		/* Refuse re-open */
@@ -134,6 +157,8 @@ struct gsm_dlci {
 	struct sk_buff_head skb_list;	/* Queued frames */
 	/* Data handling callback */
 	void (*data)(struct gsm_dlci *dlci, u8 *data, int len);
+	void (*prev_data)(struct gsm_dlci *dlci, u8 *data, int len);
+	struct net_device *net; /* network interface, if created */
 };
 
 /* DLCI 0, 62/63 are special or reseved see gsmtty_open */
@@ -169,6 +194,8 @@ struct gsm_control {
 struct gsm_mux {
 	struct tty_struct *tty;		/* The tty our ldisc is bound to */
 	spinlock_t lock;
+	unsigned int num;
+	struct kref ref;
 
 	/* Events on the GSM channel */
 	wait_queue_head_t event;
@@ -250,6 +277,8 @@ struct gsm_mux {
 static struct gsm_mux *gsm_mux[MAX_MUX];	/* GSM muxes */
 static spinlock_t gsm_mux_lock;
 
+static struct tty_driver *gsm_tty_driver;
+
 /*
  *	This section of the driver logic implements the GSM encodings
  *	both the basic and the 'advanced'. Reliable transport is not
@@ -878,8 +907,10 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
 	memcpy(dp, dlci->skb->data, len);
 	skb_pull(dlci->skb, len);
 	__gsm_data_queue(dlci, msg);
-	if (last)
+	if (last) {
+		kfree_skb(dlci->skb);
 		dlci->skb = NULL;
+	}
 	return size;
 }
 
@@ -912,7 +943,7 @@ static void gsm_dlci_data_sweep(struct gsm_mux *gsm)
 			i++;
 			continue;
 		}
-		if (dlci->adaption < 3)
+		if (dlci->adaption < 3 && !dlci->net)
 			len = gsm_dlci_data_output(gsm, dlci);
 		else
 			len = gsm_dlci_data_output_framed(gsm, dlci);
@@ -939,9 +970,12 @@ static void gsm_dlci_data_kick(struct gsm_dlci *dlci)
 
 	spin_lock_irqsave(&dlci->gsm->tx_lock, flags);
 	/* If we have nothing running then we need to fire up */
-	if (dlci->gsm->tx_bytes == 0)
-		gsm_dlci_data_output(dlci->gsm, dlci);
-	else if (dlci->gsm->tx_bytes < TX_THRESH_LO)
+	if (dlci->gsm->tx_bytes == 0) {
+		if (dlci->net)
+			gsm_dlci_data_output_framed(dlci->gsm, dlci);
+		else
+			gsm_dlci_data_output(dlci->gsm, dlci);
+	} else if (dlci->gsm->tx_bytes < TX_THRESH_LO)
 		gsm_dlci_data_sweep(dlci->gsm);
 	spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags);
 }
@@ -1588,6 +1622,8 @@ static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr)
 	if (dlci == NULL)
 		return NULL;
 	spin_lock_init(&dlci->lock);
+	kref_init(&dlci->ref);
+	mutex_init(&dlci->mutex);
 	dlci->fifo = &dlci->_fifo;
 	if (kfifo_alloc(&dlci->_fifo, 4096, GFP_KERNEL) < 0) {
 		kfree(dlci);
@@ -1613,26 +1649,52 @@ static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr)
 }
 
 /**
- *	gsm_dlci_free		-	release DLCI
+ *	gsm_dlci_free		-	free DLCI
+ *	@dlci: DLCI to free
+ *
+ *	Free up a DLCI.
+ *
+ *	Can sleep.
+ */
+static void gsm_dlci_free(struct kref *ref)
+{
+	struct gsm_dlci *dlci = container_of(ref, struct gsm_dlci, ref);
+
+	del_timer_sync(&dlci->t1);
+	dlci->gsm->dlci[dlci->addr] = NULL;
+	kfifo_free(dlci->fifo);
+	while ((dlci->skb = skb_dequeue(&dlci->skb_list)))
+		kfree_skb(dlci->skb);
+	kfree(dlci);
+}
+
+static inline void dlci_get(struct gsm_dlci *dlci)
+{
+	kref_get(&dlci->ref);
+}
+
+static inline void dlci_put(struct gsm_dlci *dlci)
+{
+	kref_put(&dlci->ref, gsm_dlci_free);
+}
+
+/**
+ *	gsm_dlci_release		-	release DLCI
  *	@dlci: DLCI to destroy
  *
- *	Free up a DLCI. Currently to keep the lifetime rules sane we only
- *	clean up DLCI objects when the MUX closes rather than as the port
- *	is closed down on both the tty and mux levels.
+ *	Release a DLCI. Actual free is deferred until either
+ *	mux is closed or tty is closed - whichever is last.
  *
  *	Can sleep.
  */
-static void gsm_dlci_free(struct gsm_dlci *dlci)
+static void gsm_dlci_release(struct gsm_dlci *dlci)
 {
 	struct tty_struct *tty = tty_port_tty_get(&dlci->port);
 	if (tty) {
 		tty_vhangup(tty);
 		tty_kref_put(tty);
 	}
-	del_timer_sync(&dlci->t1);
-	dlci->gsm->dlci[dlci->addr] = NULL;
-	kfifo_free(dlci->fifo);
-	kfree(dlci);
+	dlci_put(dlci);
 }
 
 /*
@@ -1823,10 +1885,6 @@ static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
 		break;
 	case GSM_FCS:		/* FCS follows the packet */
 		gsm->received_fcs = c;
-		if (c == GSM0_SOF) {
-			gsm->state = GSM_SEARCH;
-			break;
-		}
 		gsm_queue(gsm);
 		gsm->state = GSM_SSOF;
 		break;
@@ -1970,7 +2028,7 @@ void gsm_cleanup_mux(struct gsm_mux *gsm)
 	/* Free up any link layer users */
 	for (i = 0; i < NUM_DLCI; i++)
 		if (gsm->dlci[i])
-			gsm_dlci_free(gsm->dlci[i]);
+			gsm_dlci_release(gsm->dlci[i]);
 	/* Now wipe the queues */
 	for (txq = gsm->tx_head; txq != NULL; txq = gsm->tx_head) {
 		gsm->tx_head = txq->next;
@@ -2010,6 +2068,7 @@ int gsm_activate_mux(struct gsm_mux *gsm)
 	spin_lock(&gsm_mux_lock);
 	for (i = 0; i < MAX_MUX; i++) {
 		if (gsm_mux[i] == NULL) {
+			gsm->num = i;
 			gsm_mux[i] = gsm;
 			break;
 		}
@@ -2030,8 +2089,7 @@ EXPORT_SYMBOL_GPL(gsm_activate_mux);
  *	gsm_free_mux		-	free up a mux
  *	@mux: mux to free
  *
- *	Dispose of allocated resources for a dead mux. No refcounting
- *	at present so the mux must be truly dead.
+ *	Dispose of allocated resources for a dead mux
  */
 void gsm_free_mux(struct gsm_mux *gsm)
 {
@@ -2042,6 +2100,28 @@ void gsm_free_mux(struct gsm_mux *gsm)
 EXPORT_SYMBOL_GPL(gsm_free_mux);
 
 /**
+ *	gsm_free_muxr		-	free up a mux
+ *	@mux: mux to free
+ *
+ *	Dispose of allocated resources for a dead mux
+ */
+static void gsm_free_muxr(struct kref *ref)
+{
+	struct gsm_mux *gsm = container_of(ref, struct gsm_mux, ref);
+	gsm_free_mux(gsm);
+}
+
+static inline void mux_get(struct gsm_mux *gsm)
+{
+	kref_get(&gsm->ref);
+}
+
+static inline void mux_put(struct gsm_mux *gsm)
+{
+	kref_put(&gsm->ref, gsm_free_muxr);
+}
+
+/**
  *	gsm_alloc_mux		-	allocate a mux
  *
  *	Creates a new mux ready for activation.
@@ -2064,12 +2144,12 @@ struct gsm_mux *gsm_alloc_mux(void)
 		return NULL;
 	}
 	spin_lock_init(&gsm->lock);
+	kref_init(&gsm->ref);
 
 	gsm->t1 = T1;
 	gsm->t2 = T2;
 	gsm->n2 = N2;
 	gsm->ftype = UIH;
-	gsm->initiator = 0;
 	gsm->adaption = 1;
 	gsm->encoding = 1;
 	gsm->mru = 64;	/* Default to encoding 1 so these should be 64 */
@@ -2115,13 +2195,20 @@ static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len)
 
 static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
 {
-	int ret;
+	int ret, i;
+	int base = gsm->num << 6; /* Base for this MUX */
 
 	gsm->tty = tty_kref_get(tty);
 	gsm->output = gsmld_output;
 	ret =  gsm_activate_mux(gsm);
 	if (ret != 0)
 		tty_kref_put(gsm->tty);
+	else {
+		/* Don't register device 0 - this is the control channel and not
+		   a usable tty interface */
+		for (i = 1; i < NUM_DLCI; i++)
+			tty_register_device(gsm_tty_driver, base + i, NULL);
+	}
 	return ret;
 }
 
@@ -2136,7 +2223,12 @@ static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
 
 static void gsmld_detach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
 {
+	int i;
+	int base = gsm->num << 6; /* Base for this MUX */
+
 	WARN_ON(tty != gsm->tty);
+	for (i = 1; i < NUM_DLCI; i++)
+		tty_unregister_device(gsm_tty_driver, base + i);
 	gsm_cleanup_mux(gsm);
 	tty_kref_put(gsm->tty);
 	gsm->tty = NULL;
@@ -2224,7 +2316,7 @@ static void gsmld_close(struct tty_struct *tty)
 
 	gsmld_flush_buffer(tty);
 	/* Do other clean up here */
-	gsm_free_mux(gsm);
+	mux_put(gsm);
 }
 
 /**
@@ -2476,6 +2568,220 @@ static int gsmld_ioctl(struct tty_struct *tty, struct file *file,
 	}
 }
 
+/*
+ *	Network interface
+ *
+ */
+
+static int gsm_mux_net_open(struct net_device *net)
+{
+	pr_debug("%s called\n", __func__);
+	netif_start_queue(net);
+	return 0;
+}
+
+static int gsm_mux_net_close(struct net_device *net)
+{
+	netif_stop_queue(net);
+	return 0;
+}
+
+static struct net_device_stats *gsm_mux_net_get_stats(struct net_device *net)
+{
+	return &((struct gsm_mux_net *)netdev_priv(net))->stats;
+}
+static void dlci_net_free(struct gsm_dlci *dlci)
+{
+	if (!dlci->net) {
+		WARN_ON(1);
+		return;
+	}
+	dlci->adaption = dlci->prev_adaption;
+	dlci->data = dlci->prev_data;
+	free_netdev(dlci->net);
+	dlci->net = NULL;
+}
+static void net_free(struct kref *ref)
+{
+	struct gsm_mux_net *mux_net;
+	struct gsm_dlci *dlci;
+
+	mux_net = container_of(ref, struct gsm_mux_net, ref);
+	dlci = mux_net->dlci;
+
+	if (dlci->net) {
+		unregister_netdev(dlci->net);
+		dlci_net_free(dlci);
+	}
+}
+
+static inline void muxnet_get(struct gsm_mux_net *mux_net)
+{
+	kref_get(&mux_net->ref);
+}
+
+static inline void muxnet_put(struct gsm_mux_net *mux_net)
+{
+	kref_put(&mux_net->ref, net_free);
+}
+
+static int gsm_mux_net_start_xmit(struct sk_buff *skb,
+				      struct net_device *net)
+{
+	struct gsm_mux_net *mux_net = (struct gsm_mux_net *)netdev_priv(net);
+	struct gsm_dlci *dlci = mux_net->dlci;
+	muxnet_get(mux_net);
+
+	skb_queue_head(&dlci->skb_list, skb);
+	STATS(net).tx_packets++;
+	STATS(net).tx_bytes += skb->len;
+	gsm_dlci_data_kick(dlci);
+	/* And tell the kernel when the last transmit started. */
+	net->trans_start = jiffies;
+	muxnet_put(mux_net);
+	return NETDEV_TX_OK;
+}
+
+/* called when a packet did not ack after watchdogtimeout */
+static void gsm_mux_net_tx_timeout(struct net_device *net)
+{
+	/* Tell syslog we are hosed. */
+	dev_dbg(&net->dev, "Tx timed out.\n");
+
+	/* Update statistics */
+	STATS(net).tx_errors++;
+}
+
+static void gsm_mux_rx_netchar(struct gsm_dlci *dlci,
+				   unsigned char *in_buf, int size)
+{
+	struct net_device *net = dlci->net;
+	struct sk_buff *skb;
+	struct gsm_mux_net *mux_net = (struct gsm_mux_net *)netdev_priv(net);
+	muxnet_get(mux_net);
+
+	/* Allocate an sk_buff */
+	skb = dev_alloc_skb(size + NET_IP_ALIGN);
+	if (!skb) {
+		/* We got no receive buffer. */
+		STATS(net).rx_dropped++;
+		muxnet_put(mux_net);
+		return;
+	}
+	skb_reserve(skb, NET_IP_ALIGN);
+	memcpy(skb_put(skb, size), in_buf, size);
+
+	skb->dev = net;
+	skb->protocol = __constant_htons(ETH_P_IP);
+
+	/* Ship it off to the kernel */
+	netif_rx(skb);
+
+	/* update out statistics */
+	STATS(net).rx_packets++;
+	STATS(net).rx_bytes += size;
+	muxnet_put(mux_net);
+	return;
+}
+
+int gsm_change_mtu(struct net_device *net, int new_mtu)
+{
+	struct gsm_mux_net *mux_net = (struct gsm_mux_net *)netdev_priv(net);
+	if ((new_mtu < 8) || (new_mtu > mux_net->dlci->gsm->mtu))
+		return -EINVAL;
+	net->mtu = new_mtu;
+	return 0;
+}
+
+static void gsm_mux_net_init(struct net_device *net)
+{
+	static const struct net_device_ops gsm_netdev_ops = {
+		.ndo_open		= gsm_mux_net_open,
+		.ndo_stop		= gsm_mux_net_close,
+		.ndo_start_xmit		= gsm_mux_net_start_xmit,
+		.ndo_tx_timeout		= gsm_mux_net_tx_timeout,
+		.ndo_get_stats		= gsm_mux_net_get_stats,
+		.ndo_change_mtu		= gsm_change_mtu,
+	};
+
+	net->netdev_ops = &gsm_netdev_ops;
+
+	/* fill in the other fields */
+	net->watchdog_timeo = GSM_NET_TX_TIMEOUT;
+	net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
+	net->type = ARPHRD_NONE;
+	net->tx_queue_len = 10;
+}
+
+
+/* caller holds the dlci mutex */
+static void gsm_destroy_network(struct gsm_dlci *dlci)
+{
+	struct gsm_mux_net *mux_net;
+
+	pr_debug("destroy network interface");
+	if (!dlci->net)
+		return;
+	mux_net = (struct gsm_mux_net *)netdev_priv(dlci->net);
+	muxnet_put(mux_net);
+}
+
+
+/* caller holds the dlci mutex */
+static int gsm_create_network(struct gsm_dlci *dlci, struct gsm_netconfig *nc)
+{
+	char *netname;
+	int retval = 0;
+	struct net_device *net;
+	struct gsm_mux_net *mux_net;
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	/* Already in a non tty mode */
+	if (dlci->adaption > 2)
+		return -EBUSY;
+
+	if (nc->protocol != htons(ETH_P_IP))
+		return -EPROTONOSUPPORT;
+
+	if (nc->adaption != 3 && nc->adaption != 4)
+		return -EPROTONOSUPPORT;
+
+	pr_debug("create network interface");
+
+	netname = "gsm%d";
+	if (nc->if_name[0] != '\0')
+		netname = nc->if_name;
+	net = alloc_netdev(sizeof(struct gsm_mux_net),
+			netname,
+			gsm_mux_net_init);
+	if (!net) {
+		pr_err("alloc_netdev failed");
+		return -ENOMEM;
+	}
+	net->mtu = dlci->gsm->mtu;
+	mux_net = (struct gsm_mux_net *)netdev_priv(net);
+	mux_net->dlci = dlci;
+	kref_init(&mux_net->ref);
+	strncpy(nc->if_name, net->name, IFNAMSIZ); /* return net name */
+
+	/* reconfigure dlci for network */
+	dlci->prev_adaption = dlci->adaption;
+	dlci->prev_data = dlci->data;
+	dlci->adaption = nc->adaption;
+	dlci->data = gsm_mux_rx_netchar;
+	dlci->net = net;
+
+	pr_debug("register netdev");
+	retval = register_netdev(net);
+	if (retval) {
+		pr_err("network register fail %d\n", retval);
+		dlci_net_free(dlci);
+		return retval;
+	}
+	return net->ifindex;	/* return network index */
+}
 
 /* Line discipline for real tty */
 struct tty_ldisc_ops tty_ldisc_packet = {
@@ -2579,6 +2885,9 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp)
 	port = &dlci->port;
 	port->count++;
 	tty->driver_data = dlci;
+	dlci_get(dlci);
+	dlci_get(dlci->gsm->dlci[0]);
+	mux_get(dlci->gsm);
 	tty_port_tty_set(port, tty);
 
 	dlci->modem_rx = 0;
@@ -2594,13 +2903,23 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp)
 static void gsmtty_close(struct tty_struct *tty, struct file *filp)
 {
 	struct gsm_dlci *dlci = tty->driver_data;
+	struct gsm_mux *gsm;
+
 	if (dlci == NULL)
 		return;
+	mutex_lock(&dlci->mutex);
+	gsm_destroy_network(dlci);
+	mutex_unlock(&dlci->mutex);
+	gsm = dlci->gsm;
 	if (tty_port_close_start(&dlci->port, tty, filp) == 0)
-		return;
+		goto out;
 	gsm_dlci_begin_close(dlci);
 	tty_port_close_end(&dlci->port, tty);
 	tty_port_tty_set(&dlci->port, NULL);
+out:
+	dlci_put(dlci);
+	dlci_put(gsm->dlci[0]);
+	mux_put(gsm);
 }
 
 static void gsmtty_hangup(struct tty_struct *tty)
@@ -2677,7 +2996,32 @@ static int gsmtty_tiocmset(struct tty_struct *tty,
 static int gsmtty_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg)
 {
-	return -ENOIOCTLCMD;
+	struct gsm_dlci *dlci = tty->driver_data;
+	struct gsm_netconfig nc;
+	int index;
+
+	switch (cmd) {
+	case GSMIOC_ENABLE_NET:
+		if (copy_from_user(&nc, (void __user *)arg, sizeof(nc)))
+			return -EFAULT;
+		nc.if_name[IFNAMSIZ-1] = '\0';
+		/* return net interface index or error code */
+		mutex_lock(&dlci->mutex);
+		index = gsm_create_network(dlci, &nc);
+		mutex_unlock(&dlci->mutex);
+		if (copy_to_user((void __user *)arg, &nc, sizeof(nc)))
+			return -EFAULT;
+		return index;
+	case GSMIOC_DISABLE_NET:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		mutex_lock(&dlci->mutex);
+		gsm_destroy_network(dlci);
+		mutex_unlock(&dlci->mutex);
+		return 0;
+	default:
+		return -ENOIOCTLCMD;
+	}
 }
 
 static void gsmtty_set_termios(struct tty_struct *tty, struct ktermios *old)
@@ -2726,7 +3070,6 @@ static int gsmtty_break_ctl(struct tty_struct *tty, int state)
 	return gsmtty_modem_update(dlci, encode);
 }
 
-static struct tty_driver *gsm_tty_driver;
 
 /* Virtual ttys for the demux */
 static const struct tty_operations gsmtty_ops = {
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index c3954fbf6ac4..39d6ab6551e0 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -185,7 +185,6 @@ static void reset_buffer_flags(struct tty_struct *tty)
 	tty->canon_head = tty->canon_data = tty->erasing = 0;
 	memset(&tty->read_flags, 0, sizeof tty->read_flags);
 	n_tty_set_room(tty);
-	check_unthrottle(tty);
 }
 
 /**
@@ -1587,6 +1586,7 @@ static int n_tty_open(struct tty_struct *tty)
 			return -ENOMEM;
 	}
 	reset_buffer_flags(tty);
+	tty_unthrottle(tty);
 	tty->column = 0;
 	n_tty_set_termios(tty, NULL);
 	tty->minimum_to_wake = 1;
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index b4129f53fb1b..f2dfec82faf8 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -81,7 +81,7 @@ static unsigned int skip_txen_test; /* force skip of txen test at init time */
 #define DEBUG_INTR(fmt...)	do { } while (0)
 #endif
 
-#define PASS_LIMIT	256
+#define PASS_LIMIT	512
 
 #define BOTH_EMPTY 	(UART_LSR_TEMT | UART_LSR_THRE)
 
@@ -1107,7 +1107,7 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 			 */
 			DEBUG_AUTOCONF("Xscale ");
 			up->port.type = PORT_XSCALE;
-			up->capabilities |= UART_CAP_UUE;
+			up->capabilities |= UART_CAP_UUE | UART_CAP_RTOIE;
 			return;
 		}
 	} else {
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index cf35e0dc5085..6b887d90a205 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -39,6 +39,7 @@ struct pci_serial_quirk {
 	u32	device;
 	u32	subvendor;
 	u32	subdevice;
+	int	(*probe)(struct pci_dev *dev);
 	int	(*init)(struct pci_dev *dev);
 	int	(*setup)(struct serial_private *,
 			 const struct pciserial_board *,
@@ -56,6 +57,9 @@ struct serial_private {
 	int			line[0];
 };
 
+static int pci_default_setup(struct serial_private*,
+	  const struct pciserial_board*, struct uart_port*, int);
+
 static void moan_device(const char *str, struct pci_dev *dev)
 {
 	printk(KERN_WARNING
@@ -571,6 +575,28 @@ static const struct timedia_struct {
 	{ 8, timedia_eight_port }
 };
 
+/*
+ * There are nearly 70 different Timedia/SUNIX PCI serial devices.  Instead of
+ * listing them individually, this driver merely grabs them all with
+ * PCI_ANY_ID.  Some of these devices, however, also feature a parallel port,
+ * and should be left free to be claimed by parport_serial instead.
+ */
+static int pci_timedia_probe(struct pci_dev *dev)
+{
+	/*
+	 * Check the third digit of the subdevice ID
+	 * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel)
+	 */
+	if ((dev->subsystem_device & 0x00f0) >= 0x70) {
+		dev_info(&dev->dev,
+			"ignoring Timedia subdevice %04x for parport_serial\n",
+			dev->subsystem_device);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int pci_timedia_init(struct pci_dev *dev)
 {
 	const unsigned short *ids;
@@ -752,6 +778,62 @@ pci_ni8430_setup(struct serial_private *priv,
 	return setup_port(priv, port, bar, offset, board->reg_shift);
 }
 
+static int pci_netmos_9900_setup(struct serial_private *priv,
+				const struct pciserial_board *board,
+				struct uart_port *port, int idx)
+{
+	unsigned int bar;
+
+	if ((priv->dev->subsystem_device & 0xff00) == 0x3000) {
+		/* netmos apparently orders BARs by datasheet layout, so serial
+		 * ports get BARs 0 and 3 (or 1 and 4 for memmapped)
+		 */
+		bar = 3 * idx;
+
+		return setup_port(priv, port, bar, 0, board->reg_shift);
+	} else {
+		return pci_default_setup(priv, board, port, idx);
+	}
+}
+
+/* the 99xx series comes with a range of device IDs and a variety
+ * of capabilities:
+ *
+ * 9900 has varying capabilities and can cascade to sub-controllers
+ *   (cascading should be purely internal)
+ * 9904 is hardwired with 4 serial ports
+ * 9912 and 9922 are hardwired with 2 serial ports
+ */
+static int pci_netmos_9900_numports(struct pci_dev *dev)
+{
+	unsigned int c = dev->class;
+	unsigned int pi;
+	unsigned short sub_serports;
+
+	pi = (c & 0xff);
+
+	if (pi == 2) {
+		return 1;
+	} else if ((pi == 0) &&
+			   (dev->device == PCI_DEVICE_ID_NETMOS_9900)) {
+		/* two possibilities: 0x30ps encodes number of parallel and
+		 * serial ports, or 0x1000 indicates *something*. This is not
+		 * immediately obvious, since the 2s1p+4s configuration seems
+		 * to offer all functionality on functions 0..2, while still
+		 * advertising the same function 3 as the 4s+2s1p config.
+		 */
+		sub_serports = dev->subsystem_device & 0xf;
+		if (sub_serports > 0) {
+			return sub_serports;
+		} else {
+			printk(KERN_NOTICE "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
+			return 0;
+		}
+	}
+
+	moan_device("unknown NetMos/Mostech program interface", dev);
+	return 0;
+}
 
 static int pci_netmos_init(struct pci_dev *dev)
 {
@@ -761,12 +843,28 @@ static int pci_netmos_init(struct pci_dev *dev)
 	if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) ||
 		(dev->device == PCI_DEVICE_ID_NETMOS_9865))
 		return 0;
+
 	if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
 			dev->subsystem_device == 0x0299)
 		return 0;
 
+	switch (dev->device) { /* FALLTHROUGH on all */
+		case PCI_DEVICE_ID_NETMOS_9904:
+		case PCI_DEVICE_ID_NETMOS_9912:
+		case PCI_DEVICE_ID_NETMOS_9922:
+		case PCI_DEVICE_ID_NETMOS_9900:
+			num_serial = pci_netmos_9900_numports(dev);
+			break;
+
+		default:
+			if (num_serial == 0 ) {
+				moan_device("unknown NetMos/Mostech device", dev);
+			}
+	}
+
 	if (num_serial == 0)
 		return -ENODEV;
+
 	return num_serial;
 }
 
@@ -1396,6 +1494,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.device		= PCI_DEVICE_ID_TIMEDIA_1889,
 		.subvendor	= PCI_VENDOR_ID_TIMEDIA,
 		.subdevice	= PCI_ANY_ID,
+		.probe		= pci_timedia_probe,
 		.init		= pci_timedia_init,
 		.setup		= pci_timedia_setup,
 	},
@@ -1426,7 +1525,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
 		.init		= pci_netmos_init,
-		.setup		= pci_default_setup,
+		.setup		= pci_netmos_9900_setup,
 	},
 	/*
 	 * For Oxford Semiconductor Tornado based devices
@@ -1703,6 +1802,7 @@ enum pci_board_num_t {
 	pbn_ADDIDATA_PCIe_8_3906250,
 	pbn_ce4100_1_115200,
 	pbn_omegapci,
+	pbn_NETMOS9900_2s_115200,
 };
 
 /*
@@ -2404,6 +2504,11 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.base_baud	= 115200,
 		.uart_offset	= 0x200,
 	},
+	[pbn_NETMOS9900_2s_115200] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 115200,
+	},
 };
 
 static const struct pci_device_id softmodem_blacklist[] = {
@@ -2640,11 +2745,19 @@ EXPORT_SYMBOL_GPL(pciserial_resume_ports);
 static int __devinit
 pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 {
+	struct pci_serial_quirk *quirk;
 	struct serial_private *priv;
 	const struct pciserial_board *board;
 	struct pciserial_board tmp;
 	int rc;
 
+	quirk = find_quirk(dev);
+	if (quirk->probe) {
+		rc = quirk->probe(dev);
+		if (rc)
+			return rc;
+	}
+
 	if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
 		printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
 			ent->driver_data);
@@ -2654,6 +2767,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 	board = &pci_boards[ent->driver_data];
 
 	rc = pci_enable_device(dev);
+	pci_save_state(dev);
 	if (rc)
 		return rc;
 
@@ -3885,6 +3999,27 @@ static struct pci_device_id serial_pci_tbl[] = {
 		0xA000, 0x1000,
 		0, 0, pbn_b0_1_115200 },
 
+	/* the 9901 is a rebranded 9912 */
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+		0xA000, 0x1000,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+		0xA000, 0x3002,
+		0, 0, pbn_NETMOS9900_2s_115200 },
+
 	/*
 	 * Best Connectivity PCI Multi I/O cards
 	 */
@@ -3927,6 +4062,51 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{ 0, }
 };
 
+static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev,
+						pci_channel_state_t state)
+{
+	struct serial_private *priv = pci_get_drvdata(dev);
+
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	if (priv)
+		pciserial_suspend_ports(priv);
+
+	pci_disable_device(dev);
+
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev)
+{
+	int rc;
+
+	rc = pci_enable_device(dev);
+
+	if (rc)
+		return PCI_ERS_RESULT_DISCONNECT;
+
+	pci_restore_state(dev);
+	pci_save_state(dev);
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+static void serial8250_io_resume(struct pci_dev *dev)
+{
+	struct serial_private *priv = pci_get_drvdata(dev);
+
+	if (priv)
+		pciserial_resume_ports(priv);
+}
+
+static struct pci_error_handlers serial8250_err_handler = {
+	.error_detected = serial8250_io_error_detected,
+	.slot_reset = serial8250_io_slot_reset,
+	.resume = serial8250_io_resume,
+};
+
 static struct pci_driver serial_pci_driver = {
 	.name		= "serial",
 	.probe		= pciserial_init_one,
@@ -3936,6 +4116,7 @@ static struct pci_driver serial_pci_driver = {
 	.resume		= pciserial_resume_one,
 #endif
 	.id_table	= serial_pci_tbl,
+	.err_handler	= &serial8250_err_handler,
 };
 
 static int __init serial8250_pci_init(void)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 8f41e1123461..cb40b82daf36 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1404,7 +1404,7 @@ config SERIAL_SC26XX
 
 config SERIAL_SC26XX_CONSOLE
 	bool "Console on SC2681/SC2692 serial port"
-	depends on SERIAL_SC26XX
+	depends on SERIAL_SC26XX=y
 	select SERIAL_CORE_CONSOLE
 	help
 	  Support for Console on SC2681/SC2692 serial ports.
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 465210930890..846dfcd3ce0d 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -14,6 +14,7 @@
  *along with this program; if not, write to the Free Software
  *Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  */
+#include <linux/kernel.h>
 #include <linux/serial_reg.h>
 #include <linux/slab.h>
 #include <linux/module.h>
@@ -44,6 +45,7 @@ enum {
 /* Set the max number of UART port
  * Intel EG20T PCH: 4 port
  * OKI SEMICONDUCTOR ML7213 IOH: 3 port
+ * OKI SEMICONDUCTOR ML7223 IOH: 2 port
 */
 #define PCH_UART_NR	4
 
@@ -137,8 +139,6 @@ enum {
 #define PCH_UART_DLL		0x00
 #define PCH_UART_DLM		0x01
 
-#define DIV_ROUND(a, b)	(((a) + ((b)/2)) / (b))
-
 #define PCH_UART_IID_RLS	(PCH_UART_IIR_REI)
 #define PCH_UART_IID_RDR	(PCH_UART_IIR_RRI)
 #define PCH_UART_IID_RDR_TO	(PCH_UART_IIR_RRI | PCH_UART_IIR_TOI)
@@ -316,7 +316,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
 	unsigned int dll, dlm, lcr;
 	int div;
 
-	div = DIV_ROUND(priv->base_baud / 16, baud);
+	div = DIV_ROUND_CLOSEST(priv->base_baud / 16, baud);
 	if (div < 0 || USHRT_MAX <= div) {
 		dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
 		return -EINVAL;
@@ -1429,6 +1429,8 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 		goto init_port_hal_free;
 	}
 
+	pci_enable_msi(pdev);
+
 	iobase = pci_resource_start(pdev, 0);
 	mapbase = pci_resource_start(pdev, 1);
 	priv->mapbase = mapbase;
@@ -1485,6 +1487,8 @@ static void pch_uart_pci_remove(struct pci_dev *pdev)
 	struct eg20t_port *priv;
 
 	priv = (struct eg20t_port *)pci_get_drvdata(pdev);
+
+	pci_disable_msi(pdev);
 	pch_uart_exit_port(priv);
 	pci_disable_device(pdev);
 	kfree(priv);
@@ -1568,6 +1572,7 @@ static int __devinit pch_uart_pci_probe(struct pci_dev *pdev,
 	return ret;
 
 probe_disable_device:
+	pci_disable_msi(pdev);
 	pci_disable_device(pdev);
 probe_error:
 	return ret;
diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c
index 8dd160c96e87..8b0b888a1b76 100644
--- a/drivers/tty/serial/s5pv210.c
+++ b/drivers/tty/serial/s5pv210.c
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/delay.h>
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
@@ -83,6 +84,9 @@ static int s5pv210_serial_resetport(struct uart_port *port,
 	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
 	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
 
+	/* It is need to delay When reset FIFO register */
+	udelay(1);
+
 	return 0;
 }
 
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 7ead42104c67..afc629423152 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1194,12 +1194,10 @@ int __devexit s3c24xx_serial_remove(struct platform_device *dev)
 EXPORT_SYMBOL_GPL(s3c24xx_serial_remove);
 
 /* UART power management code */
-
-#ifdef CONFIG_PM
-
-static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int s3c24xx_serial_suspend(struct device *dev)
 {
-	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
+	struct uart_port *port = s3c24xx_dev_to_port(dev);
 
 	if (port)
 		uart_suspend_port(&s3c24xx_uart_drv, port);
@@ -1207,9 +1205,9 @@ static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t stat
 	return 0;
 }
 
-static int s3c24xx_serial_resume(struct platform_device *dev)
+static int s3c24xx_serial_resume(struct device *dev)
 {
-	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
+	struct uart_port *port = s3c24xx_dev_to_port(dev);
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 
 	if (port) {
@@ -1222,17 +1220,20 @@ static int s3c24xx_serial_resume(struct platform_device *dev)
 
 	return 0;
 }
-#endif
+
+static const struct dev_pm_ops s3c24xx_serial_pm_ops = {
+	.suspend = s3c24xx_serial_suspend,
+	.resume = s3c24xx_serial_resume,
+};
+#else /* !CONFIG_PM_SLEEP */
+#define s3c24xx_serial_pm_ops	NULL
+#endif /* CONFIG_PM_SLEEP */
 
 int s3c24xx_serial_init(struct platform_driver *drv,
 			struct s3c24xx_uart_info *info)
 {
 	dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
-
-#ifdef CONFIG_PM
-	drv->suspend = s3c24xx_serial_suspend;
-	drv->resume = s3c24xx_serial_resume;
-#endif
+	drv->driver.pm = &s3c24xx_serial_pm_ops;
 
 	return platform_driver_register(drv);
 }
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 6556f7452ba6..150e4f747c7d 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -94,6 +94,7 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/serial.h>
+#include <linux/ratelimit.h>
 
 #include <linux/uaccess.h>
 #include <asm/system.h>
@@ -1420,8 +1421,7 @@ err_module_put:
 
 	/* call the tty release_tty routine to clean out this slot */
 err_release_tty:
-	if (printk_ratelimit())
-		printk(KERN_INFO "tty_init_dev: ldisc open failed, "
+	printk_ratelimited(KERN_INFO "tty_init_dev: ldisc open failed, "
 				 "clearing slot %d\n", idx);
 	release_tty(tty, idx);
 	return ERR_PTR(retval);