diff options
| author | Timur Tabi <timur@codeaurora.org> | 2016-01-05 00:37:42 +0300 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2016-01-07 08:02:45 +0300 |
| commit | 3b78fae793c027140cfe635ef216bf60aa6498f4 (patch) | |
| tree | 3b0157674a758482d9f3c773f3bdcb78990a9774 /drivers/tty | |
| parent | cdf091ca2c3d6875e5f0fca28de4a6ca2f5273e6 (diff) | |
| download | linux-3b78fae793c027140cfe635ef216bf60aa6498f4.tar.xz | |
tty: amba-pl011: use iotype instead of access_32b to track 32-bit I/O
Instead of defining a new field in the uart_amba_port structure, use the
existing iotype field of the uart_port structure, which is intended for
this purpose. If we need to use 32-bit register access, we set iotype
to UPIO_MEM32, otherwise we set it to UPIO_MEM.
For early console, specify the "mmio32" option on the kernel command-line.
Example:
earlycon=pl011,mmio32,0x3ced1000
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/amba-pl011.c | 16 |
1 files changed, 9 insertions, 7 deletions
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index a7d7ab05dc64..c0da0ccbbcf5 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -238,7 +238,6 @@ struct uart_amba_port { unsigned int fifosize; /* vendor-specific */ unsigned int old_cr; /* state during shutdown */ bool autorts; - bool access_32b; unsigned int fixed_baud; /* vendor-set fixed baud rate */ char type[12]; #ifdef CONFIG_DMA_ENGINE @@ -262,7 +261,8 @@ static unsigned int pl011_read(const struct uart_amba_port *uap, { void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg); - return uap->access_32b ? readl_relaxed(addr) : readw_relaxed(addr); + return (uap->port.iotype == UPIO_MEM32) ? + readl_relaxed(addr) : readw_relaxed(addr); } static void pl011_write(unsigned int val, const struct uart_amba_port *uap, @@ -270,7 +270,7 @@ static void pl011_write(unsigned int val, const struct uart_amba_port *uap, { void __iomem *addr = uap->port.membase + pl011_reg_to_offset(uap, reg); - if (uap->access_32b) + if (uap->port.iotype == UPIO_MEM32) writel_relaxed(val, addr); else writew_relaxed(val, addr); @@ -2303,7 +2303,10 @@ static void pl011_putc(struct uart_port *port, int c) { while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF) ; - writeb(c, port->membase + UART01x_DR); + if (port->iotype == UPIO_MEM32) + writel(c, port->membase + UART01x_DR); + else + writeb(c, port->membase + UART01x_DR); while (readl(port->membase + UART01x_FR) & UART01x_FR_BUSY) ; } @@ -2416,7 +2419,6 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap, uap->port.dev = dev; uap->port.mapbase = mmiobase->start; uap->port.membase = base; - uap->port.iotype = UPIO_MEM; uap->port.fifosize = uap->fifosize; uap->port.flags = UPF_BOOT_AUTOCONF; uap->port.line = index; @@ -2470,9 +2472,9 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) return PTR_ERR(uap->clk); uap->reg_offset = vendor->reg_offset; - uap->access_32b = vendor->access_32b; uap->vendor = vendor; uap->fifosize = vendor->get_fifosize(dev); + uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM; uap->port.irq = dev->irq[0]; uap->port.ops = &amba_pl011_pops; @@ -2551,9 +2553,9 @@ static int sbsa_uart_probe(struct platform_device *pdev) return -ENOMEM; uap->reg_offset = vendor_sbsa.reg_offset; - uap->access_32b = vendor_sbsa.access_32b; uap->vendor = &vendor_sbsa; uap->fifosize = 32; + uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : UPIO_MEM; uap->port.irq = platform_get_irq(pdev, 0); uap->port.ops = &sbsa_uart_pops; uap->fixed_baud = baudrate; |