Merge branch 'for-linus' into for-next

Back-merge the 6.5-devel branch for the clean patch application for
6.6 and resolving merge conflicts.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

5 files changed, 7 insertions, 12 deletions

diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c
index 75f32f054ebb..84843e204a5e 100644
--- a/drivers/tty/serial/8250/8250_dwlib.c
+++ b/drivers/tty/serial/8250/8250_dwlib.c
@@ -244,7 +244,7 @@ void dw8250_setup_port(struct uart_port *p)
 	struct dw8250_port_data *pd = p->private_data;
 	struct dw8250_data *data = to_dw8250_data(pd);
 	struct uart_8250_port *up = up_to_u8250p(p);
-	u32 reg;
+	u32 reg, old_dlf;
 
 	pd->hw_rs485_support = dw8250_detect_rs485_hw(p);
 	if (pd->hw_rs485_support) {
@@ -270,9 +270,11 @@ void dw8250_setup_port(struct uart_port *p)
 	dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
 		(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
 
+	/* Preserve value written by firmware or bootloader  */
+	old_dlf = dw8250_readl_ext(p, DW_UART_DLF);
 	dw8250_writel_ext(p, DW_UART_DLF, ~0U);
 	reg = dw8250_readl_ext(p, DW_UART_DLF);
-	dw8250_writel_ext(p, DW_UART_DLF, 0);
+	dw8250_writel_ext(p, DW_UART_DLF, old_dlf);
 
 	if (reg) {
 		pd->dlf_size = fls(reg);
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 444c74eeab7d..daaf2a64e7f1 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1681,13 +1681,6 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	/*
-	 * Set pm_runtime status as ACTIVE so that wakeup_irq gets
-	 * enabled/disabled from dev_pm_arm_wake_irq during system
-	 * suspend/resume respectively.
-	 */
-	pm_runtime_set_active(&pdev->dev);
-
 	if (port->wakeup_irq > 0) {
 		device_init_wakeup(&pdev->dev, true);
 		ret = dev_pm_set_dedicated_wake_irq(&pdev->dev,
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 7c9457962a3d..8b7a42e05d6d 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -590,7 +590,7 @@ static void sci_start_tx(struct uart_port *port)
 	    dma_submit_error(s->cookie_tx)) {
 		if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE)
 			/* Switch irq from SCIF to DMA */
-			disable_irq(s->irqs[SCIx_TXI_IRQ]);
+			disable_irq_nosync(s->irqs[SCIx_TXI_IRQ]);
 
 		s->cookie_tx = 0;
 		schedule_work(&s->work_tx);
diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index 1f565a216e74..a19db49327e2 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -811,7 +811,7 @@ static void sifive_serial_console_write(struct console *co, const char *s,
 	local_irq_restore(flags);
 }
 
-static int __init sifive_serial_console_setup(struct console *co, char *options)
+static int sifive_serial_console_setup(struct console *co, char *options)
 {
 	struct sifive_serial_port *ssp;
 	int baud = SIFIVE_DEFAULT_BAUD_RATE;
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 404230c1ebb2..0a370b9ea70b 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -59,7 +59,7 @@ static int firmware_loaded;
 /* #define LOOPBACK */
 
 /* The major and minor device numbers are defined in
- * http://www.lanana.org/docs/device-list/devices-2.6+.txt.  For the QE
+ * Documentation/admin-guide/devices.txt.  For the QE
  * UART, we have major number 204 and minor numbers 46 - 49, which are the
  * same as for the CPM2.  This decision was made because no Freescale part
  * has both a CPM and a QE.