serial: remove m32r_sio driver

The m32r architecture is getting removed, so we don't need this
any more.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

4 files changed, 0 insertions, 1233 deletions

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 031552eb3f65..1a48ae6abb2c 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -905,35 +905,6 @@ config SERIAL_ICOM
 	  This driver can also be built as a module.  If so, the module
 	  will be called icom.
 
-config SERIAL_M32R_SIO
-	bool "M32R SIO I/F"
-	depends on M32R
-	default y
-	select SERIAL_CORE
-	help
-	  Say Y here if you want to use the M32R serial controller.
-
-config SERIAL_M32R_SIO_CONSOLE
-	bool "use SIO console"
-	depends on SERIAL_M32R_SIO=y
-	select SERIAL_CORE_CONSOLE
-	help
-	  Say Y here if you want to support a serial console.
-
-	  If you use an M3T-M32700UT or an OPSPUT platform,
-	  please say also y for SERIAL_M32R_PLDSIO.
-
-config SERIAL_M32R_PLDSIO
-	bool "M32R SIO I/F on a PLD"
-	depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT)
-	default n
-	help
-	  Say Y here if you want to use the M32R serial controller
-	  on a PLD (Programmable Logic Device).
-
-	  If you use an M3T-M32700UT or an OPSPUT platform,
-	  please say Y.
-
 config SERIAL_TXX9
 	bool "TMPTX39XX/49XX SIO support"
 	depends on HAS_TXX9_SERIAL
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index a9242484e821..606e746b61f1 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -45,7 +45,6 @@ obj-$(CONFIG_SERIAL_CPM) += cpm_uart/
 obj-$(CONFIG_SERIAL_IMX) += imx.o
 obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o
 obj-$(CONFIG_SERIAL_ICOM) += icom.o
-obj-$(CONFIG_SERIAL_M32R_SIO) += m32r_sio.o
 obj-$(CONFIG_SERIAL_MPSC) += mpsc.o
 obj-$(CONFIG_SERIAL_MESON) += meson_uart.o
 obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c
deleted file mode 100644
index 7b83a8aab495..000000000000
--- a/drivers/tty/serial/m32r_sio.c
+++ /dev/null
@@ -1,1053 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *  m32r_sio.c
- *
- *  Driver for M32R serial ports
- *
- *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *  Based on drivers/serial/8250.c.
- *
- *  Copyright (C) 2001  Russell King.
- *  Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
- */
-
-/*
- * A note about mapbase / membase
- *
- *  mapbase is the physical address of the IO port.  Currently, we don't
- *  support this very well, and it may well be dropped from this driver
- *  in future.  As such, mapbase should be NULL.
- *
- *  membase is an 'ioremapped' cookie.  This is compatible with the old
- *  serial.c driver, and is currently the preferred form.
- */
-
-#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/serial.h>
-#include <linux/delay.h>
-
-#include <asm/m32r.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#define BAUD_RATE	115200
-
-#include <linux/serial_core.h>
-#include "m32r_sio_reg.h"
-
-#define PASS_LIMIT	256
-
-static const struct {
-	unsigned int port;
-	unsigned int irq;
-} old_serial_port[] = {
-#if defined(CONFIG_PLAT_USRV)
-	/* PORT  IRQ            FLAGS */
-	{ 0x3F8, PLD_IRQ_UART0 }, /* ttyS0 */
-	{ 0x2F8, PLD_IRQ_UART1 }, /* ttyS1 */
-#elif defined(CONFIG_SERIAL_M32R_PLDSIO)
-	{ ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV }, /* ttyS0 */
-#else
-	{ M32R_SIO_OFFSET, M32R_IRQ_SIO0_R }, /* ttyS0 */
-#endif
-};
-
-#define UART_NR	ARRAY_SIZE(old_serial_port)
-
-struct uart_sio_port {
-	struct uart_port	port;
-	struct timer_list	timer;		/* "no irq" timer */
-	struct list_head	list;		/* ports on this IRQ */
-	unsigned char		ier;
-};
-
-struct irq_info {
-	spinlock_t		lock;
-	struct list_head	*head;
-};
-
-static struct irq_info irq_lists[NR_IRQS];
-
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-
-#define __sio_in(x) inw((unsigned long)(x))
-#define __sio_out(v,x) outw((v),(unsigned long)(x))
-
-static inline void sio_set_baud_rate(unsigned long baud)
-{
-	unsigned short sbaud;
-	sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1;
-	__sio_out(sbaud, PLD_ESIO0BAUR);
-}
-
-static void sio_reset(void)
-{
-	unsigned short tmp;
-
-	tmp = __sio_in(PLD_ESIO0RXB);
-	tmp = __sio_in(PLD_ESIO0RXB);
-	tmp = __sio_in(PLD_ESIO0CR);
-	sio_set_baud_rate(BAUD_RATE);
-	__sio_out(0x0300, PLD_ESIO0CR);
-	__sio_out(0x0003, PLD_ESIO0CR);
-}
-
-static void sio_init(void)
-{
-	unsigned short tmp;
-
-	tmp = __sio_in(PLD_ESIO0RXB);
-	tmp = __sio_in(PLD_ESIO0RXB);
-	tmp = __sio_in(PLD_ESIO0CR);
-	__sio_out(0x0300, PLD_ESIO0CR);
-	__sio_out(0x0003, PLD_ESIO0CR);
-}
-
-static void sio_error(int *status)
-{
-	printk("SIO0 error[%04x]\n", *status);
-	do {
-		sio_init();
-	} while ((*status = __sio_in(PLD_ESIO0CR)) != 3);
-}
-
-#else /* not CONFIG_SERIAL_M32R_PLDSIO */
-
-#define __sio_in(x) inl(x)
-#define __sio_out(v,x) outl((v),(x))
-
-static inline void sio_set_baud_rate(unsigned long baud)
-{
-	unsigned long i, j;
-
-	i = boot_cpu_data.bus_clock / (baud * 16);
-	j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud;
-	i -= 1;
-	j = (j + 1) >> 1;
-
-	__sio_out(i, M32R_SIO0_BAUR_PORTL);
-	__sio_out(j, M32R_SIO0_RBAUR_PORTL);
-}
-
-static void sio_reset(void)
-{
-	__sio_out(0x00000300, M32R_SIO0_CR_PORTL);	/* init status */
-	__sio_out(0x00000800, M32R_SIO0_MOD1_PORTL);	/* 8bit        */
-	__sio_out(0x00000080, M32R_SIO0_MOD0_PORTL);	/* 1stop non   */
-	sio_set_baud_rate(BAUD_RATE);
-	__sio_out(0x00000000, M32R_SIO0_TRCR_PORTL);
-	__sio_out(0x00000003, M32R_SIO0_CR_PORTL);	/* RXCEN */
-}
-
-static void sio_init(void)
-{
-	unsigned int tmp;
-
-	tmp = __sio_in(M32R_SIO0_RXB_PORTL);
-	tmp = __sio_in(M32R_SIO0_RXB_PORTL);
-	tmp = __sio_in(M32R_SIO0_STS_PORTL);
-	__sio_out(0x00000003, M32R_SIO0_CR_PORTL);
-}
-
-static void sio_error(int *status)
-{
-	printk("SIO0 error[%04x]\n", *status);
-	do {
-		sio_init();
-	} while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3);
-}
-
-#endif /* CONFIG_SERIAL_M32R_PLDSIO */
-
-static unsigned int sio_in(struct uart_sio_port *up, int offset)
-{
-	return __sio_in(up->port.iobase + offset);
-}
-
-static void sio_out(struct uart_sio_port *up, int offset, int value)
-{
-	__sio_out(value, up->port.iobase + offset);
-}
-
-static unsigned int serial_in(struct uart_sio_port *up, int offset)
-{
-	if (!offset)
-		return 0;
-
-	return __sio_in(offset);
-}
-
-static void serial_out(struct uart_sio_port *up, int offset, int value)
-{
-	if (!offset)
-		return;
-
-	__sio_out(value, offset);
-}
-
-static void m32r_sio_stop_tx(struct uart_port *port)
-{
-	struct uart_sio_port *up =
-		container_of(port, struct uart_sio_port, port);
-
-	if (up->ier & UART_IER_THRI) {
-		up->ier &= ~UART_IER_THRI;
-		serial_out(up, UART_IER, up->ier);
-	}
-}
-
-static void m32r_sio_start_tx(struct uart_port *port)
-{
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-	struct uart_sio_port *up =
-		container_of(port, struct uart_sio_port, port);
-	struct circ_buf *xmit = &up->port.state->xmit;
-
-	if (!(up->ier & UART_IER_THRI)) {
-		up->ier |= UART_IER_THRI;
-		serial_out(up, UART_IER, up->ier);
-		if (!uart_circ_empty(xmit)) {
-			serial_out(up, UART_TX, xmit->buf[xmit->tail]);
-			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-			up->port.icount.tx++;
-		}
-	}
-	while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY);
-#else
-	struct uart_sio_port *up =
-		container_of(port, struct uart_sio_port, port);
-
-	if (!(up->ier & UART_IER_THRI)) {
-		up->ier |= UART_IER_THRI;
-		serial_out(up, UART_IER, up->ier);
-	}
-#endif
-}
-
-static void m32r_sio_stop_rx(struct uart_port *port)
-{
-	struct uart_sio_port *up =
-		container_of(port, struct uart_sio_port, port);
-
-	up->ier &= ~UART_IER_RLSI;
-	up->port.read_status_mask &= ~UART_LSR_DR;
-	serial_out(up, UART_IER, up->ier);
-}
-
-static void m32r_sio_enable_ms(struct uart_port *port)
-{
-	struct uart_sio_port *up =
-		container_of(port, struct uart_sio_port, port);
-
-	up->ier |= UART_IER_MSI;
-	serial_out(up, UART_IER, up->ier);
-}
-
-static void receive_chars(struct uart_sio_port *up, int *status)
-{
-	struct tty_port *port = &up->port.state->port;
-	unsigned char ch;
-	unsigned char flag;
-	int max_count = 256;
-
-	do {
-		ch = sio_in(up, SIORXB);
-		flag = TTY_NORMAL;
-		up->port.icount.rx++;
-
-		if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
-				       UART_LSR_FE | UART_LSR_OE))) {
-			/*
-			 * For statistics only
-			 */
-			if (*status & UART_LSR_BI) {
-				*status &= ~(UART_LSR_FE | UART_LSR_PE);
-				up->port.icount.brk++;
-				/*
-				 * We do the SysRQ and SAK checking
-				 * here because otherwise the break
-				 * may get masked by ignore_status_mask
-				 * or read_status_mask.
-				 */
-				if (uart_handle_break(&up->port))
-					goto ignore_char;
-			} else if (*status & UART_LSR_PE)
-				up->port.icount.parity++;
-			else if (*status & UART_LSR_FE)
-				up->port.icount.frame++;
-			if (*status & UART_LSR_OE)
-				up->port.icount.overrun++;
-
-			/*
-			 * Mask off conditions which should be ingored.
-			 */
-			*status &= up->port.read_status_mask;
-
-			if (*status & UART_LSR_BI) {
-				pr_debug("handling break....\n");
-				flag = TTY_BREAK;
-			} else if (*status & UART_LSR_PE)
-				flag = TTY_PARITY;
-			else if (*status & UART_LSR_FE)
-				flag = TTY_FRAME;
-		}
-		if (uart_handle_sysrq_char(&up->port, ch))
-			goto ignore_char;
-		if ((*status & up->port.ignore_status_mask) == 0)
-			tty_insert_flip_char(port, ch, flag);
-
-		if (*status & UART_LSR_OE) {
-			/*
-			 * Overrun is special, since it's reported
-			 * immediately, and doesn't affect the current
-			 * character.
-			 */
-			tty_insert_flip_char(port, 0, TTY_OVERRUN);
-		}
-	ignore_char:
-		*status = serial_in(up, UART_LSR);
-	} while ((*status & UART_LSR_DR) && (max_count-- > 0));
-
-	spin_unlock(&up->port.lock);
-	tty_flip_buffer_push(port);
-	spin_lock(&up->port.lock);
-}
-
-static void transmit_chars(struct uart_sio_port *up)
-{
-	struct circ_buf *xmit = &up->port.state->xmit;
-	int count;
-
-	if (up->port.x_char) {
-#ifndef CONFIG_SERIAL_M32R_PLDSIO	/* XXX */
-		serial_out(up, UART_TX, up->port.x_char);
-#endif
-		up->port.icount.tx++;
-		up->port.x_char = 0;
-		return;
-	}
-	if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
-		m32r_sio_stop_tx(&up->port);
-		return;
-	}
-
-	count = up->port.fifosize;
-	do {
-		serial_out(up, UART_TX, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		up->port.icount.tx++;
-		if (uart_circ_empty(xmit))
-			break;
-		while (!(serial_in(up, UART_LSR) & UART_LSR_THRE));
-
-	} while (--count > 0);
-
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(&up->port);
-
-	pr_debug("THRE...\n");
-
-	if (uart_circ_empty(xmit))
-		m32r_sio_stop_tx(&up->port);
-}
-
-/*
- * This handles the interrupt from one port.
- */
-static inline void m32r_sio_handle_port(struct uart_sio_port *up,
-	unsigned int status)
-{
-	pr_debug("status = %x...\n", status);
-
-	if (status & 0x04)
-		receive_chars(up, &status);
-	if (status & 0x01)
-		transmit_chars(up);
-}
-
-/*
- * This is the serial driver's interrupt routine.
- *
- * Arjan thinks the old way was overly complex, so it got simplified.
- * Alan disagrees, saying that need the complexity to handle the weird
- * nature of ISA shared interrupts.  (This is a special exception.)
- *
- * In order to handle ISA shared interrupts properly, we need to check
- * that all ports have been serviced, and therefore the ISA interrupt
- * line has been de-asserted.
- *
- * This means we need to loop through all ports. checking that they
- * don't have an interrupt pending.
- */
-static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id)
-{
-	struct irq_info *i = dev_id;
-	struct list_head *l, *end = NULL;
-	int pass_counter = 0;
-
-	pr_debug("m32r_sio_interrupt(%d)...\n", irq);
-
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-//	if (irq == PLD_IRQ_SIO0_SND)
-//		irq = PLD_IRQ_SIO0_RCV;
-#else
-	if (irq == M32R_IRQ_SIO0_S)
-		irq = M32R_IRQ_SIO0_R;
-#endif
-
-	spin_lock(&i->lock);
-
-	l = i->head;
-	do {
-		struct uart_sio_port *up;
-		unsigned int sts;
-
-		up = list_entry(l, struct uart_sio_port, list);
-
-		sts = sio_in(up, SIOSTS);
-		if (sts & 0x5) {
-			spin_lock(&up->port.lock);
-			m32r_sio_handle_port(up, sts);
-			spin_unlock(&up->port.lock);
-
-			end = NULL;
-		} else if (end == NULL)
-			end = l;
-
-		l = l->next;
-
-		if (l == i->head && pass_counter++ > PASS_LIMIT) {
-			if (sts & 0xe0)
-				sio_error(&sts);
-			break;
-		}
-	} while (l != end);
-
-	spin_unlock(&i->lock);
-
-	pr_debug("end.\n");
-
-	return IRQ_HANDLED;
-}
-
-/*
- * To support ISA shared interrupts, we need to have one interrupt
- * handler that ensures that the IRQ line has been deasserted
- * before returning.  Failing to do this will result in the IRQ
- * line being stuck active, and, since ISA irqs are edge triggered,
- * no more IRQs will be seen.
- */
-static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up)
-{
-	spin_lock_irq(&i->lock);
-
-	if (!list_empty(i->head)) {
-		if (i->head == &up->list)
-			i->head = i->head->next;
-		list_del(&up->list);
-	} else {
-		BUG_ON(i->head != &up->list);
-		i->head = NULL;
-	}
-
-	spin_unlock_irq(&i->lock);
-}
-
-static int serial_link_irq_chain(struct uart_sio_port *up)
-{
-	struct irq_info *i = irq_lists + up->port.irq;
-	int ret, irq_flags = 0;
-
-	spin_lock_irq(&i->lock);
-
-	if (i->head) {
-		list_add(&up->list, i->head);
-		spin_unlock_irq(&i->lock);
-
-		ret = 0;
-	} else {
-		INIT_LIST_HEAD(&up->list);
-		i->head = &up->list;
-		spin_unlock_irq(&i->lock);
-
-		ret = request_irq(up->port.irq, m32r_sio_interrupt,
-				  irq_flags, "SIO0-RX", i);
-		ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt,
-				  irq_flags, "SIO0-TX", i);
-		if (ret < 0)
-			serial_do_unlink(i, up);
-	}
-
-	return ret;
-}
-
-static void serial_unlink_irq_chain(struct uart_sio_port *up)
-{
-	struct irq_info *i = irq_lists + up->port.irq;
-
-	BUG_ON(i->head == NULL);
-
-	if (list_empty(i->head)) {
-		free_irq(up->port.irq, i);
-		free_irq(up->port.irq + 1, i);
-	}
-
-	serial_do_unlink(i, up);
-}
-
-/*
- * This function is used to handle ports that do not have an interrupt.
- */
-static void m32r_sio_timeout(struct timer_list *t)
-{
-	struct uart_sio_port *up = from_timer(up, t, timer);
-	unsigned int timeout;
-	unsigned int sts;
-
-	sts = sio_in(up, SIOSTS);
-	if (sts & 0x5) {
-		spin_lock(&up->port.lock);
-		m32r_sio_handle_port(up, sts);
-		spin_unlock(&up->port.lock);
-	}
-
-	timeout = up->port.timeout;
-	timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
-	mod_timer(&up->timer, jiffies + timeout);
-}
-
-static unsigned int m32r_sio_tx_empty(struct uart_port *port)
-{
-	struct uart_sio_port *up =
-		container_of(port, struct uart_sio_port, port);
-	unsigned long flags;
-	unsigned int ret;
-
-	spin_lock_irqsave(&up->port.lock, flags);
-	ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
-	spin_unlock_irqrestore(&up->port.lock, flags);
-
-	return ret;
-}
-
-static unsigned int m32r_sio_get_mctrl(struct uart_port *port)
-{
-	return 0;
-}
-
-static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-
-}
-
-static void m32r_sio_break_ctl(struct uart_port *port, int break_state)
-{
-
-}
-
-static int m32r_sio_startup(struct uart_port *port)
-{
-	struct uart_sio_port *up =
-		container_of(port, struct uart_sio_port, port);
-	int retval;
-
-	sio_init();
-
-	/*
-	 * If the "interrupt" for this port doesn't correspond with any
-	 * hardware interrupt, we use a timer-based system.  The original
-	 * driver used to do this with IRQ0.
-	 */
-	if (!up->port.irq) {
-		unsigned int timeout = up->port.timeout;
-
-		timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
-
-		mod_timer(&up->timer, jiffies + timeout);
-	} else {
-		retval = serial_link_irq_chain(up);
-		if (retval)
-			return retval;
-	}
-
-	/*
-	 * Finally, enable interrupts.  Note: Modem status interrupts
-	 * are set via set_termios(), which will be occurring imminently
-	 * anyway, so we don't enable them here.
-	 * - M32R_SIO: 0x0c
-	 * - M32R_PLDSIO: 0x04
-	 */
-	up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
-	sio_out(up, SIOTRCR, up->ier);
-
-	/*
-	 * And clear the interrupt registers again for luck.
-	 */
-	sio_reset();
-
-	return 0;
-}
-
-static void m32r_sio_shutdown(struct uart_port *port)
-{
-	struct uart_sio_port *up =
-		container_of(port, struct uart_sio_port, port);
-
-	/*
-	 * Disable interrupts from this port
-	 */
-	up->ier = 0;
-	sio_out(up, SIOTRCR, 0);
-
-	/*
-	 * Disable break condition and FIFOs
-	 */
-
-	sio_init();
-
-	if (!up->port.irq)
-		del_timer_sync(&up->timer);
-	else
-		serial_unlink_irq_chain(up);
-}
-
-static unsigned int m32r_sio_get_divisor(struct uart_port *port,
-	unsigned int baud)
-{
-	return uart_get_divisor(port, baud);
-}
-
-static void m32r_sio_set_termios(struct uart_port *port,
-	struct ktermios *termios, struct ktermios *old)
-{
-	struct uart_sio_port *up =
-		container_of(port, struct uart_sio_port, port);
-	unsigned char cval = 0;
-	unsigned long flags;
-	unsigned int baud, quot;
-
-	switch (termios->c_cflag & CSIZE) {
-	case CS5:
-		cval = UART_LCR_WLEN5;
-		break;
-	case CS6:
-		cval = UART_LCR_WLEN6;
-		break;
-	case CS7:
-		cval = UART_LCR_WLEN7;
-		break;
-	default:
-	case CS8:
-		cval = UART_LCR_WLEN8;
-		break;
-	}
-
-	if (termios->c_cflag & CSTOPB)
-		cval |= UART_LCR_STOP;
-	if (termios->c_cflag & PARENB)
-		cval |= UART_LCR_PARITY;
-	if (!(termios->c_cflag & PARODD))
-		cval |= UART_LCR_EPAR;
-#ifdef CMSPAR
-	if (termios->c_cflag & CMSPAR)
-		cval |= UART_LCR_SPAR;
-#endif
-
-	/*
-	 * Ask the core to calculate the divisor for us.
-	 */
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4);
-#else
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-#endif
-	quot = m32r_sio_get_divisor(port, baud);
-
-	/*
-	 * Ok, we're now changing the port state.  Do it with
-	 * interrupts disabled.
-	 */
-	spin_lock_irqsave(&up->port.lock, flags);
-
-	sio_set_baud_rate(baud);
-
-	/*
-	 * Update the per-port timeout.
-	 */
-	uart_update_timeout(port, termios->c_cflag, baud);
-
-	up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
-	if (termios->c_iflag & INPCK)
-		up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
-		up->port.read_status_mask |= UART_LSR_BI;
-
-	/*
-	 * Characteres to ignore
-	 */
-	up->port.ignore_status_mask = 0;
-	if (termios->c_iflag & IGNPAR)
-		up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
-	if (termios->c_iflag & IGNBRK) {
-		up->port.ignore_status_mask |= UART_LSR_BI;
-		/*
-		 * If we're ignoring parity and break indicators,
-		 * ignore overruns too (for real raw support).
-		 */
-		if (termios->c_iflag & IGNPAR)
-			up->port.ignore_status_mask |= UART_LSR_OE;
-	}
-
-	/*
-	 * ignore all characters if CREAD is not set
-	 */
-	if ((termios->c_cflag & CREAD) == 0)
-		up->port.ignore_status_mask |= UART_LSR_DR;
-
-	/*
-	 * CTS flow control flag and modem status interrupts
-	 */
-	up->ier &= ~UART_IER_MSI;
-	if (UART_ENABLE_MS(&up->port, termios->c_cflag))
-		up->ier |= UART_IER_MSI;
-
-	serial_out(up, UART_IER, up->ier);
-
-	spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-/*
- * Resource handling.  This is complicated by the fact that resources
- * depend on the port type.  Maybe we should be claiming the standard
- * 8250 ports, and then trying to get other resources as necessary?
- */
-static int
-m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res)
-{
-	unsigned int size = 8 << up->port.regshift;
-#ifndef CONFIG_SERIAL_M32R_PLDSIO
-	unsigned long start;
-#endif
-	int ret = 0;
-
-	switch (up->port.iotype) {
-	case UPIO_MEM:
-		if (up->port.mapbase) {
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-			*res = request_mem_region(up->port.mapbase, size, "serial");
-#else
-			start = up->port.mapbase;
-			*res = request_mem_region(start, size, "serial");
-#endif
-			if (!*res)
-				ret = -EBUSY;
-		}
-		break;
-
-	case UPIO_PORT:
-		*res = request_region(up->port.iobase, size, "serial");
-		if (!*res)
-			ret = -EBUSY;
-		break;
-	}
-	return ret;
-}
-
-static void m32r_sio_release_port(struct uart_port *port)
-{
-	struct uart_sio_port *up =
-		container_of(port, struct uart_sio_port, port);
-	unsigned long start, offset = 0, size = 0;
-
-	size <<= up->port.regshift;
-
-	switch (up->port.iotype) {
-	case UPIO_MEM:
-		if (up->port.mapbase) {
-			/*
-			 * Unmap the area.
-			 */
-			iounmap(up->port.membase);
-			up->port.membase = NULL;
-
-			start = up->port.mapbase;
-
-			if (size)
-				release_mem_region(start + offset, size);
-			release_mem_region(start, 8 << up->port.regshift);
-		}
-		break;
-
-	case UPIO_PORT:
-		start = up->port.iobase;
-
-		if (size)
-			release_region(start + offset, size);
-		release_region(start + offset, 8 << up->port.regshift);
-		break;
-
-	default:
-		break;
-	}
-}
-
-static int m32r_sio_request_port(struct uart_port *port)
-{
-	struct uart_sio_port *up =
-		container_of(port, struct uart_sio_port, port);
-	struct resource *res = NULL;
-	int ret = 0;
-
-	ret = m32r_sio_request_std_resource(up, &res);
-
-	/*
-	 * If we have a mapbase, then request that as well.
-	 */
-	if (ret == 0 && up->port.flags & UPF_IOREMAP) {
-		int size = resource_size(res);
-
-		up->port.membase = ioremap(up->port.mapbase, size);
-		if (!up->port.membase)
-			ret = -ENOMEM;
-	}
-
-	if (ret < 0) {
-		if (res)
-			release_resource(res);
-	}
-
-	return ret;
-}
-
-static void m32r_sio_config_port(struct uart_port *port, int unused)
-{
-	struct uart_sio_port *up =
-		container_of(port, struct uart_sio_port, port);
-	unsigned long flags;
-
-	spin_lock_irqsave(&up->port.lock, flags);
-
-	up->port.fifosize = 1;
-
-	spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-static int
-m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
-	if (ser->irq >= nr_irqs || ser->irq < 0 || ser->baud_base < 9600)
-		return -EINVAL;
-	return 0;
-}
-
-static const struct uart_ops m32r_sio_pops = {
-	.tx_empty	= m32r_sio_tx_empty,
-	.set_mctrl	= m32r_sio_set_mctrl,
-	.get_mctrl	= m32r_sio_get_mctrl,
-	.stop_tx	= m32r_sio_stop_tx,
-	.start_tx	= m32r_sio_start_tx,
-	.stop_rx	= m32r_sio_stop_rx,
-	.enable_ms	= m32r_sio_enable_ms,
-	.break_ctl	= m32r_sio_break_ctl,
-	.startup	= m32r_sio_startup,
-	.shutdown	= m32r_sio_shutdown,
-	.set_termios	= m32r_sio_set_termios,
-	.release_port	= m32r_sio_release_port,
-	.request_port	= m32r_sio_request_port,
-	.config_port	= m32r_sio_config_port,
-	.verify_port	= m32r_sio_verify_port,
-};
-
-static struct uart_sio_port m32r_sio_ports[UART_NR];
-
-static void __init m32r_sio_init_ports(void)
-{
-	struct uart_sio_port *up;
-	static int first = 1;
-	int i;
-
-	if (!first)
-		return;
-	first = 0;
-
-	for (i = 0, up = m32r_sio_ports; i < UART_NR; i++, up++) {
-		up->port.iobase   = old_serial_port[i].port;
-		up->port.irq      = irq_canonicalize(old_serial_port[i].irq);
-		up->port.uartclk  = BAUD_RATE * 16;
-		up->port.flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-		up->port.membase  = 0;
-		up->port.iotype   = 0;
-		up->port.regshift = 0;
-		up->port.ops      = &m32r_sio_pops;
-	}
-}
-
-static void __init m32r_sio_register_ports(struct uart_driver *drv)
-{
-	int i;
-
-	m32r_sio_init_ports();
-
-	for (i = 0; i < UART_NR; i++) {
-		struct uart_sio_port *up = &m32r_sio_ports[i];
-
-		up->port.line = i;
-		up->port.ops = &m32r_sio_pops;
-		timer_setup(&up->timer, m32r_sio_timeout, 0);
-
-		uart_add_one_port(drv, &up->port);
-	}
-}
-
-#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE
-
-/*
- *	Wait for transmitter & holding register to empty
- */
-static void wait_for_xmitr(struct uart_sio_port *up)
-{
-	unsigned int status, tmout = 10000;
-
-	/* Wait up to 10ms for the character(s) to be sent. */
-	do {
-		status = sio_in(up, SIOSTS);
-
-		if (--tmout == 0)
-			break;
-		udelay(1);
-	} while ((status & UART_EMPTY) != UART_EMPTY);
-
-	/* Wait up to 1s for flow control if necessary */
-	if (up->port.flags & UPF_CONS_FLOW) {
-		tmout = 1000000;
-		while (--tmout)
-			udelay(1);
-	}
-}
-
-static void m32r_sio_console_putchar(struct uart_port *port, int ch)
-{
-	struct uart_sio_port *up =
-		container_of(port, struct uart_sio_port, port);
-
-	wait_for_xmitr(up);
-	sio_out(up, SIOTXB, ch);
-}
-
-/*
- *	Print a string to the serial port trying not to disturb
- *	any possible real use of the port...
- *
- *	The console_lock must be held when we get here.
- */
-static void m32r_sio_console_write(struct console *co, const char *s,
-	unsigned int count)
-{
-	struct uart_sio_port *up = &m32r_sio_ports[co->index];
-	unsigned int ier;
-
-	/*
-	 *	First save the UER then disable the interrupts
-	 */
-	ier = sio_in(up, SIOTRCR);
-	sio_out(up, SIOTRCR, 0);
-
-	uart_console_write(&up->port, s, count, m32r_sio_console_putchar);
-
-	/*
-	 *	Finally, wait for transmitter to become empty
-	 *	and restore the IER
-	 */
-	wait_for_xmitr(up);
-	sio_out(up, SIOTRCR, ier);
-}
-
-static int __init m32r_sio_console_setup(struct console *co, char *options)
-{
-	struct uart_port *port;
-	int baud = 9600;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
-
-	/*
-	 * Check whether an invalid uart number has been specified, and
-	 * if so, search for the first available port that does have
-	 * console support.
-	 */
-	if (co->index >= UART_NR)
-		co->index = 0;
-	port = &m32r_sio_ports[co->index].port;
-
-	/*
-	 * Temporary fix.
-	 */
-	spin_lock_init(&port->lock);
-
-	if (options)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
-
-	return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver m32r_sio_reg;
-static struct console m32r_sio_console = {
-	.name		= "ttyS",
-	.write		= m32r_sio_console_write,
-	.device		= uart_console_device,
-	.setup		= m32r_sio_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-	.data		= &m32r_sio_reg,
-};
-
-static int __init m32r_sio_console_init(void)
-{
-	sio_reset();
-	sio_init();
-	m32r_sio_init_ports();
-	register_console(&m32r_sio_console);
-	return 0;
-}
-console_initcall(m32r_sio_console_init);
-
-#define M32R_SIO_CONSOLE	&m32r_sio_console
-#else
-#define M32R_SIO_CONSOLE	NULL
-#endif
-
-static struct uart_driver m32r_sio_reg = {
-	.owner			= THIS_MODULE,
-	.driver_name		= "sio",
-	.dev_name		= "ttyS",
-	.major			= TTY_MAJOR,
-	.minor			= 64,
-	.nr			= UART_NR,
-	.cons			= M32R_SIO_CONSOLE,
-};
-
-static int __init m32r_sio_init(void)
-{
-	int ret, i;
-
-	printk(KERN_INFO "Serial: M32R SIO driver\n");
-
-	for (i = 0; i < nr_irqs; i++)
-		spin_lock_init(&irq_lists[i].lock);
-
-	ret = uart_register_driver(&m32r_sio_reg);
-	if (ret >= 0)
-		m32r_sio_register_ports(&m32r_sio_reg);
-
-	return ret;
-}
-device_initcall(m32r_sio_init);
diff --git a/drivers/tty/serial/m32r_sio_reg.h b/drivers/tty/serial/m32r_sio_reg.h
deleted file mode 100644
index 6eed48828f94..000000000000
--- a/drivers/tty/serial/m32r_sio_reg.h
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-1.0+
-/*
- * m32r_sio_reg.h
- *
- * Copyright (C) 1992, 1994 by Theodore Ts'o.
- * Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
- *
- * These are the UART port assignments, expressed as offsets from the base
- * register.  These assignments should hold for any serial port based on
- * a 8250, 16450, or 16550(A).
- */
-
-#ifndef _M32R_SIO_REG_H
-#define _M32R_SIO_REG_H
-
-
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-
-#define SIOCR		0x000
-#define SIOMOD0		0x002
-#define SIOMOD1		0x004
-#define SIOSTS		0x006
-#define SIOTRCR		0x008
-#define SIOBAUR		0x00a
-// #define SIORBAUR	0x018
-#define SIOTXB		0x00c
-#define SIORXB		0x00e
-
-#define UART_RX		((unsigned long) PLD_ESIO0RXB)
-				/* In:  Receive buffer (DLAB=0) */
-#define UART_TX		((unsigned long) PLD_ESIO0TXB)
-				/* Out: Transmit buffer (DLAB=0) */
-#define UART_DLL	0	/* Out: Divisor Latch Low (DLAB=1) */
-#define UART_TRG	0	/* (LCR=BF) FCTR bit 7 selects Rx or Tx
-				 * In: Fifo count
-				 * Out: Fifo custom trigger levels
-				 * XR16C85x only */
-
-#define UART_DLM	0	/* Out: Divisor Latch High (DLAB=1) */
-#define UART_IER	((unsigned long) PLD_ESIO0INTCR)
-				/* Out: Interrupt Enable Register */
-#define UART_FCTR	0	/* (LCR=BF) Feature Control Register
-				 * XR16C85x only */
-
-#define UART_IIR	0	/* In:  Interrupt ID Register */
-#define UART_FCR	0	/* Out: FIFO Control Register */
-#define UART_EFR	0	/* I/O: Extended Features Register */
-				/* (DLAB=1, 16C660 only) */
-
-#define UART_LCR	0	/* Out: Line Control Register */
-#define UART_MCR	0	/* Out: Modem Control Register */
-#define UART_LSR	((unsigned long) PLD_ESIO0STS)
-				/* In:  Line Status Register */
-#define UART_MSR	0	/* In:  Modem Status Register */
-#define UART_SCR	0	/* I/O: Scratch Register */
-#define UART_EMSR	0	/* (LCR=BF) Extended Mode Select Register
-				 * FCTR bit 6 selects SCR or EMSR
-				 * XR16c85x only */
-
-#else /* not CONFIG_SERIAL_M32R_PLDSIO */
-
-#define SIOCR		0x000
-#define SIOMOD0		0x004
-#define SIOMOD1		0x008
-#define SIOSTS		0x00c
-#define SIOTRCR		0x010
-#define SIOBAUR		0x014
-#define SIORBAUR	0x018
-#define SIOTXB		0x01c
-#define SIORXB		0x020
-
-#define UART_RX		M32R_SIO0_RXB_PORTL	/* In:  Receive buffer (DLAB=0) */
-#define UART_TX		M32R_SIO0_TXB_PORTL	/* Out: Transmit buffer (DLAB=0) */
-#define UART_DLL	0	/* Out: Divisor Latch Low (DLAB=1) */
-#define UART_TRG	0	/* (LCR=BF) FCTR bit 7 selects Rx or Tx
-				 * In: Fifo count
-				 * Out: Fifo custom trigger levels
-				 * XR16C85x only */
-
-#define UART_DLM	0	/* Out: Divisor Latch High (DLAB=1) */
-#define UART_IER	M32R_SIO0_TRCR_PORTL	/* Out: Interrupt Enable Register */
-#define UART_FCTR	0	/* (LCR=BF) Feature Control Register
-				 * XR16C85x only */
-
-#define UART_IIR	0	/* In:  Interrupt ID Register */
-#define UART_FCR	0	/* Out: FIFO Control Register */
-#define UART_EFR	0	/* I/O: Extended Features Register */
-				/* (DLAB=1, 16C660 only) */
-
-#define UART_LCR	0	/* Out: Line Control Register */
-#define UART_MCR	0	/* Out: Modem Control Register */
-#define UART_LSR	M32R_SIO0_STS_PORTL	/* In:  Line Status Register */
-#define UART_MSR	0	/* In:  Modem Status Register */
-#define UART_SCR	0	/* I/O: Scratch Register */
-#define UART_EMSR	0	/* (LCR=BF) Extended Mode Select Register
-				 * FCTR bit 6 selects SCR or EMSR
-				 * XR16c85x only */
-
-#endif /* CONFIG_SERIAL_M32R_PLDSIO */
-
-#define UART_EMPTY	(UART_LSR_TEMT | UART_LSR_THRE)
-
-/*
- * These are the definitions for the Line Control Register
- *
- * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
- * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
- */
-#define UART_LCR_DLAB	0x80	/* Divisor latch access bit */
-#define UART_LCR_SBC	0x40	/* Set break control */
-#define UART_LCR_SPAR	0x20	/* Stick parity (?) */
-#define UART_LCR_EPAR	0x10	/* Even parity select */
-#define UART_LCR_PARITY	0x08	/* Parity Enable */
-#define UART_LCR_STOP	0x04	/* Stop bits: 0=1 stop bit, 1= 2 stop bits */
-#define UART_LCR_WLEN5  0x00	/* Wordlength: 5 bits */
-#define UART_LCR_WLEN6  0x01	/* Wordlength: 6 bits */
-#define UART_LCR_WLEN7  0x02	/* Wordlength: 7 bits */
-#define UART_LCR_WLEN8  0x03	/* Wordlength: 8 bits */
-
-/*
- * These are the definitions for the Line Status Register
- */
-#define UART_LSR_TEMT	0x02	/* Transmitter empty */
-#define UART_LSR_THRE	0x01	/* Transmit-hold-register empty */
-#define UART_LSR_BI	0x00	/* Break interrupt indicator */
-#define UART_LSR_FE	0x80	/* Frame error indicator */
-#define UART_LSR_PE	0x40	/* Parity error indicator */
-#define UART_LSR_OE	0x20	/* Overrun error indicator */
-#define UART_LSR_DR	0x04	/* Receiver data ready */
-
-/*
- * These are the definitions for the Interrupt Identification Register
- */
-#define UART_IIR_NO_INT	0x01	/* No interrupts pending */
-#define UART_IIR_ID	0x06	/* Mask for the interrupt ID */
-
-#define UART_IIR_MSI	0x00	/* Modem status interrupt */
-#define UART_IIR_THRI	0x02	/* Transmitter holding register empty */
-#define UART_IIR_RDI	0x04	/* Receiver data interrupt */
-#define UART_IIR_RLSI	0x06	/* Receiver line status interrupt */
-
-/*
- * These are the definitions for the Interrupt Enable Register
- */
-#define UART_IER_MSI	0x00	/* Enable Modem status interrupt */
-#define UART_IER_RLSI	0x08	/* Enable receiver line status interrupt */
-#define UART_IER_THRI	0x03	/* Enable Transmitter holding register int. */
-#define UART_IER_RDI	0x04	/* Enable receiver data interrupt */
-
-#endif /* _M32R_SIO_REG_H */