tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 120 insertions, 0 deletions

diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
new file mode 100644
index 000000000000..0ac06a07d25f
--- /dev/null
+++ b/drivers/tty/serial/samsung.h
@@ -0,0 +1,120 @@
+/* linux/drivers/serial/samsung.h
+ *
+ * Driver for Samsung SoC onboard UARTs.
+ *
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct s3c24xx_uart_info {
+	char			*name;
+	unsigned int		type;
+	unsigned int		fifosize;
+	unsigned long		rx_fifomask;
+	unsigned long		rx_fifoshift;
+	unsigned long		rx_fifofull;
+	unsigned long		tx_fifomask;
+	unsigned long		tx_fifoshift;
+	unsigned long		tx_fifofull;
+
+	/* uart port features */
+
+	unsigned int		has_divslot:1;
+
+	/* clock source control */
+
+	int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
+	int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
+
+	/* uart controls */
+	int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *);
+};
+
+struct s3c24xx_uart_port {
+	unsigned char			rx_claimed;
+	unsigned char			tx_claimed;
+	unsigned int			pm_level;
+	unsigned long			baudclk_rate;
+
+	unsigned int			rx_irq;
+	unsigned int			tx_irq;
+
+	struct s3c24xx_uart_info	*info;
+	struct s3c24xx_uart_clksrc	*clksrc;
+	struct clk			*clk;
+	struct clk			*baudclk;
+	struct uart_port		port;
+
+#ifdef CONFIG_CPU_FREQ
+	struct notifier_block		freq_transition;
+#endif
+};
+
+/* conversion functions */
+
+#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev)
+#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data)
+
+/* register access controls */
+
+#define portaddr(port, reg) ((port)->membase + (reg))
+
+#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg)))
+#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
+
+#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg))
+#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
+
+extern int s3c24xx_serial_probe(struct platform_device *dev,
+				struct s3c24xx_uart_info *uart);
+
+extern int __devexit s3c24xx_serial_remove(struct platform_device *dev);
+
+extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
+				      struct s3c24xx_uart_info **uart);
+
+extern int s3c24xx_serial_init(struct platform_driver *drv,
+			       struct s3c24xx_uart_info *info);
+
+#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
+
+#define s3c24xx_console_init(__drv, __inf)				\
+static int __init s3c_serial_console_init(void)				\
+{									\
+	struct s3c24xx_uart_info *uinfo[CONFIG_SERIAL_SAMSUNG_UARTS];	\
+	int i;								\
+									\
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)		\
+		uinfo[i] = __inf;					\
+	return s3c24xx_serial_initconsole(__drv, uinfo);		\
+}									\
+									\
+console_initcall(s3c_serial_console_init)
+
+#else
+#define s3c24xx_console_init(drv, inf) extern void no_console(void)
+#endif
+
+#ifdef CONFIG_SERIAL_SAMSUNG_DEBUG
+
+extern void printascii(const char *);
+
+static void dbg(const char *fmt, ...)
+{
+	va_list va;
+	char buff[256];
+
+	va_start(va, fmt);
+	vsprintf(buff, fmt, va);
+	va_end(va);
+
+	printascii(buff);
+}
+
+#else
+#define dbg(x...) do { } while (0)
+#endif