serial: jsm: Convert jsm_printk to jsm_dbg

These printks should all be emitted at KERN_DEBUG level.
Make them dependent on CONFIG_DEBUG or (#define DEBUG)
simplify the code a bit.

Add missing newlines where appropriate.

Most all of these messages could be deleted too.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 52 insertions, 50 deletions

diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 71397961773c..7d2c1f3aa36b 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -43,7 +43,7 @@ static inline int jsm_get_mstat(struct jsm_channel *ch)
 	unsigned char mstat;
 	unsigned result;
 
-	jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "start\n");
+	jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, "start\n");
 
 	mstat = (ch->ch_mostat | ch->ch_mistat);
 
@@ -62,7 +62,7 @@ static inline int jsm_get_mstat(struct jsm_channel *ch)
 	if (mstat & UART_MSR_DCD)
 		result |= TIOCM_CD;
 
-	jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n");
+	jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, "finish\n");
 	return result;
 }
 
@@ -79,14 +79,14 @@ static unsigned int jsm_tty_get_mctrl(struct uart_port *port)
 	int result;
 	struct jsm_channel *channel = (struct jsm_channel *)port;
 
-	jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+	jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n");
 
 	result = jsm_get_mstat(channel);
 
 	if (result < 0)
 		return -ENXIO;
 
-	jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+	jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n");
 
 	return result;
 }
@@ -100,7 +100,7 @@ static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	struct jsm_channel *channel = (struct jsm_channel *)port;
 
-	jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+	jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n");
 
 	if (mctrl & TIOCM_RTS)
 		channel->ch_mostat |= UART_MCR_RTS;
@@ -114,7 +114,7 @@ static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl)
 
 	channel->ch_bd->bd_ops->assert_modem_signals(channel);
 
-	jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+	jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n");
 	udelay(10);
 }
 
@@ -135,23 +135,23 @@ static void jsm_tty_start_tx(struct uart_port *port)
 {
 	struct jsm_channel *channel = (struct jsm_channel *)port;
 
-	jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+	jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n");
 
 	channel->ch_flags &= ~(CH_STOP);
 	jsm_tty_write(port);
 
-	jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+	jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n");
 }
 
 static void jsm_tty_stop_tx(struct uart_port *port)
 {
 	struct jsm_channel *channel = (struct jsm_channel *)port;
 
-	jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+	jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "start\n");
 
 	channel->ch_flags |= (CH_STOP);
 
-	jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+	jsm_dbg(IOCTL, &channel->ch_bd->pci_dev, "finish\n");
 }
 
 static void jsm_tty_send_xchar(struct uart_port *port, char ch)
@@ -216,16 +216,16 @@ static int jsm_tty_open(struct uart_port *port)
 	if (!channel->ch_rqueue) {
 		channel->ch_rqueue = kzalloc(RQUEUESIZE, GFP_KERNEL);
 		if (!channel->ch_rqueue) {
-			jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev,
-				"unable to allocate read queue buf");
+			jsm_dbg(INIT, &channel->ch_bd->pci_dev,
+				"unable to allocate read queue buf\n");
 			return -ENOMEM;
 		}
 	}
 	if (!channel->ch_equeue) {
 		channel->ch_equeue = kzalloc(EQUEUESIZE, GFP_KERNEL);
 		if (!channel->ch_equeue) {
-			jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev,
-				"unable to allocate error queue buf");
+			jsm_dbg(INIT, &channel->ch_bd->pci_dev,
+				"unable to allocate error queue buf\n");
 			return -ENOMEM;
 		}
 	}
@@ -234,7 +234,7 @@ static int jsm_tty_open(struct uart_port *port)
 	/*
 	 * Initialize if neither terminal is open.
 	 */
-	jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev,
+	jsm_dbg(OPEN, &channel->ch_bd->pci_dev,
 		"jsm_open: initializing channel in open...\n");
 
 	/*
@@ -270,7 +270,7 @@ static int jsm_tty_open(struct uart_port *port)
 
 	channel->ch_open_count++;
 
-	jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, "finish\n");
+	jsm_dbg(OPEN, &channel->ch_bd->pci_dev, "finish\n");
 	return 0;
 }
 
@@ -280,7 +280,7 @@ static void jsm_tty_close(struct uart_port *port)
 	struct ktermios *ts;
 	struct jsm_channel *channel = (struct jsm_channel *)port;
 
-	jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n");
+	jsm_dbg(CLOSE, &channel->ch_bd->pci_dev, "start\n");
 
 	bd = channel->ch_bd;
 	ts = &port->state->port.tty->termios;
@@ -293,7 +293,7 @@ static void jsm_tty_close(struct uart_port *port)
 	 * If we have HUPCL set, lower DTR and RTS
 	 */
 	if (channel->ch_c_cflag & HUPCL) {
-		jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev,
+		jsm_dbg(CLOSE, &channel->ch_bd->pci_dev,
 			"Close. HUPCL set, dropping DTR/RTS\n");
 
 		/* Drop RTS/DTR */
@@ -304,7 +304,7 @@ static void jsm_tty_close(struct uart_port *port)
 	/* Turn off UART interrupts for this port */
 	channel->ch_bd->bd_ops->uart_off(channel);
 
-	jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "finish\n");
+	jsm_dbg(CLOSE, &channel->ch_bd->pci_dev, "finish\n");
 }
 
 static void jsm_tty_set_termios(struct uart_port *port,
@@ -380,7 +380,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd)
 	if (!brd)
 		return -ENXIO;
 
-	jsm_printk(INIT, INFO, &brd->pci_dev, "start\n");
+	jsm_dbg(INIT, &brd->pci_dev, "start\n");
 
 	/*
 	 * Initialize board structure elements.
@@ -401,9 +401,9 @@ int __devinit jsm_tty_init(struct jsm_board *brd)
 			 */
 			brd->channels[i] = kzalloc(sizeof(struct jsm_channel), GFP_KERNEL);
 			if (!brd->channels[i]) {
-				jsm_printk(CORE, ERR, &brd->pci_dev,
+				jsm_dbg(CORE, &brd->pci_dev,
 					"%s:%d Unable to allocate memory for channel struct\n",
-							 __FILE__, __LINE__);
+					__FILE__, __LINE__);
 			}
 		}
 	}
@@ -431,7 +431,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd)
 		init_waitqueue_head(&ch->ch_flags_wait);
 	}
 
-	jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
+	jsm_dbg(INIT, &brd->pci_dev, "finish\n");
 	return 0;
 }
 
@@ -444,7 +444,7 @@ int jsm_uart_port_init(struct jsm_board *brd)
 	if (!brd)
 		return -ENXIO;
 
-	jsm_printk(INIT, INFO, &brd->pci_dev, "start\n");
+	jsm_dbg(INIT, &brd->pci_dev, "start\n");
 
 	/*
 	 * Initialize board structure elements.
@@ -481,7 +481,7 @@ int jsm_uart_port_init(struct jsm_board *brd)
 			printk(KERN_INFO "jsm: Port %d added\n", i);
 	}
 
-	jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
+	jsm_dbg(INIT, &brd->pci_dev, "finish\n");
 	return 0;
 }
 
@@ -493,7 +493,7 @@ int jsm_remove_uart_port(struct jsm_board *brd)
 	if (!brd)
 		return -ENXIO;
 
-	jsm_printk(INIT, INFO, &brd->pci_dev, "start\n");
+	jsm_dbg(INIT, &brd->pci_dev, "start\n");
 
 	/*
 	 * Initialize board structure elements.
@@ -513,7 +513,7 @@ int jsm_remove_uart_port(struct jsm_board *brd)
 		uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port);
 	}
 
-	jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
+	jsm_dbg(INIT, &brd->pci_dev, "finish\n");
 	return 0;
 }
 
@@ -531,7 +531,7 @@ void jsm_input(struct jsm_channel *ch)
 	int s = 0;
 	int i = 0;
 
-	jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n");
+	jsm_dbg(READ, &ch->ch_bd->pci_dev, "start\n");
 
 	if (!ch)
 		return;
@@ -560,7 +560,7 @@ void jsm_input(struct jsm_channel *ch)
 		return;
 	}
 
-	jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n");
+	jsm_dbg(READ, &ch->ch_bd->pci_dev, "start\n");
 
 	/*
 	 *If the device is not open, or CREAD is off, flush
@@ -569,8 +569,9 @@ void jsm_input(struct jsm_channel *ch)
 	if (!tp ||
 		!(tp->termios.c_cflag & CREAD) ) {
 
-		jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
-			"input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum);
+		jsm_dbg(READ, &ch->ch_bd->pci_dev,
+			"input. dropping %d bytes on port %d...\n",
+			data_len, ch->ch_portnum);
 		ch->ch_r_head = tail;
 
 		/* Force queue flow control to be released, if needed */
@@ -585,17 +586,17 @@ void jsm_input(struct jsm_channel *ch)
 	 */
 	if (ch->ch_flags & CH_STOPI) {
 		spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-		jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+		jsm_dbg(READ, &ch->ch_bd->pci_dev,
 			"Port %d throttled, not reading any data. head: %x tail: %x\n",
 			ch->ch_portnum, head, tail);
 		return;
 	}
 
-	jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start 2\n");
+	jsm_dbg(READ, &ch->ch_bd->pci_dev, "start 2\n");
 
 	if (data_len <= 0) {
 		spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-		jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n");
+		jsm_dbg(READ, &ch->ch_bd->pci_dev, "jsm_input 1\n");
 		return;
 	}
 
@@ -653,7 +654,7 @@ void jsm_input(struct jsm_channel *ch)
 	/* Tell the tty layer its okay to "eat" the data now */
 	tty_flip_buffer_push(tp);
 
-	jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n");
+	jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, "finish\n");
 }
 
 static void jsm_carrier(struct jsm_channel *ch)
@@ -663,7 +664,7 @@ static void jsm_carrier(struct jsm_channel *ch)
 	int virt_carrier = 0;
 	int phys_carrier = 0;
 
-	jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, "start\n");
+	jsm_dbg(CARR, &ch->ch_bd->pci_dev, "start\n");
 	if (!ch)
 		return;
 
@@ -673,16 +674,16 @@ static void jsm_carrier(struct jsm_channel *ch)
 		return;
 
 	if (ch->ch_mistat & UART_MSR_DCD) {
-		jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
-			"mistat: %x D_CD: %x\n", ch->ch_mistat, ch->ch_mistat & UART_MSR_DCD);
+		jsm_dbg(CARR, &ch->ch_bd->pci_dev, "mistat: %x D_CD: %x\n",
+			ch->ch_mistat, ch->ch_mistat & UART_MSR_DCD);
 		phys_carrier = 1;
 	}
 
 	if (ch->ch_c_cflag & CLOCAL)
 		virt_carrier = 1;
 
-	jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
-		"DCD: physical: %d virt: %d\n", phys_carrier, virt_carrier);
+	jsm_dbg(CARR, &ch->ch_bd->pci_dev, "DCD: physical: %d virt: %d\n",
+		phys_carrier, virt_carrier);
 
 	/*
 	 * Test for a VIRTUAL carrier transition to HIGH.
@@ -694,8 +695,7 @@ static void jsm_carrier(struct jsm_channel *ch)
 		 * for carrier in the open routine.
 		 */
 
-		jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
-			"carrier: virt DCD rose\n");
+		jsm_dbg(CARR, &ch->ch_bd->pci_dev, "carrier: virt DCD rose\n");
 
 		if (waitqueue_active(&(ch->ch_flags_wait)))
 			wake_up_interruptible(&ch->ch_flags_wait);
@@ -711,7 +711,7 @@ static void jsm_carrier(struct jsm_channel *ch)
 		 * for carrier in the open routine.
 		 */
 
-		jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
+		jsm_dbg(CARR, &ch->ch_bd->pci_dev,
 			"carrier: physical DCD rose\n");
 
 		if (waitqueue_active(&(ch->ch_flags_wait)))
@@ -790,8 +790,8 @@ void jsm_check_queue_flow_control(struct jsm_channel *ch)
 			if(!(ch->ch_flags & CH_RECEIVER_OFF)) {
 				bd_ops->disable_receiver(ch);
 				ch->ch_flags |= (CH_RECEIVER_OFF);
-				jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
-					"Internal queue hit hilevel mark (%d)! Turning off interrupts.\n",
+				jsm_dbg(READ, &ch->ch_bd->pci_dev,
+					"Internal queue hit hilevel mark (%d)! Turning off interrupts\n",
 					qleft);
 			}
 		}
@@ -800,8 +800,9 @@ void jsm_check_queue_flow_control(struct jsm_channel *ch)
 			if (ch->ch_stops_sent <= MAX_STOPS_SENT) {
 				bd_ops->send_stop_character(ch);
 				ch->ch_stops_sent++;
-				jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
-					"Sending stop char! Times sent: %x\n", ch->ch_stops_sent);
+				jsm_dbg(READ, &ch->ch_bd->pci_dev,
+					"Sending stop char! Times sent: %x\n",
+					ch->ch_stops_sent);
 			}
 		}
 	}
@@ -827,8 +828,8 @@ void jsm_check_queue_flow_control(struct jsm_channel *ch)
 			if (ch->ch_flags & CH_RECEIVER_OFF) {
 				bd_ops->enable_receiver(ch);
 				ch->ch_flags &= ~(CH_RECEIVER_OFF);
-				jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
-					"Internal queue hit lowlevel mark (%d)! Turning on interrupts.\n",
+				jsm_dbg(READ, &ch->ch_bd->pci_dev,
+					"Internal queue hit lowlevel mark (%d)! Turning on interrupts\n",
 					qleft);
 			}
 		}
@@ -836,7 +837,8 @@ void jsm_check_queue_flow_control(struct jsm_channel *ch)
 		else if (ch->ch_c_iflag & IXOFF && ch->ch_stops_sent) {
 			ch->ch_stops_sent = 0;
 			bd_ops->send_start_character(ch);
-			jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "Sending start char!\n");
+			jsm_dbg(READ, &ch->ch_bd->pci_dev,
+				"Sending start char!\n");
 		}
 	}
 }