Merge 4.0-rc3 into tty-testing

This resolves a merge issue in drivers/tty/serial/8250/8250_pci.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 211 insertions, 22 deletions

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index deae122c9c4b..7b502c0a848f 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -895,7 +895,7 @@ static int broken_efr(struct uart_8250_port *up)
 	/*
 	 * Exar ST16C2550 "A2" devices incorrectly detect as
 	 * having an EFR, and report an ID of 0x0201.  See
-	 * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html 
+	 * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
 	 */
 	if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
 		return 1;
@@ -1260,7 +1260,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
 	serial_out(up, UART_LCR, save_lcr);
 
 	port->fifosize = uart_config[up->port.type].fifo_size;
-	old_capabilities = up->capabilities; 
+	old_capabilities = up->capabilities;
 	up->capabilities = uart_config[port->type].flags;
 	up->tx_loadsz = uart_config[port->type].tx_loadsz;
 
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 2ab229ddee38..f7f5371352b7 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -416,18 +416,24 @@ static int dw8250_probe(struct platform_device *pdev)
 {
 	struct uart_8250_port uart = {};
 	struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	int irq = platform_get_irq(pdev, 0);
 	struct dw8250_data *data;
 	int err;
 
-	if (!regs || !irq) {
-		dev_err(&pdev->dev, "no registers/irq defined\n");
+	if (!regs) {
+		dev_err(&pdev->dev, "no registers defined\n");
 		return -EINVAL;
 	}
 
+	if (irq < 0) {
+		if (irq != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "cannot get irq\n");
+		return irq;
+	}
+
 	spin_lock_init(&uart.port.lock);
 	uart.port.mapbase = regs->start;
-	uart.port.irq = irq->start;
+	uart.port.irq = irq;
 	uart.port.handle_irq = dw8250_handle_irq;
 	uart.port.pm = dw8250_do_pm;
 	uart.port.type = PORT_8250;
@@ -640,3 +646,4 @@ module_platform_driver(dw8250_platform_driver);
 MODULE_AUTHOR("Jamie Iles");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Synopsys DesignWare 8250 serial port driver");
+MODULE_ALIAS("platform:dw-apb-uart");
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 892eb32cdef4..11784e9ad9c2 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -27,6 +27,7 @@
 
 #include <linux/dmaengine.h>
 #include <linux/platform_data/dma-dw.h>
+#include <linux/platform_data/dma-hsu.h>
 
 #include "8250.h"
 
@@ -1525,6 +1526,148 @@ byt_serial_setup(struct serial_private *priv,
 	return ret;
 }
 
+#define INTEL_MID_UART_PS		0x30
+#define INTEL_MID_UART_MUL		0x34
+
+static void intel_mid_set_termios_50M(struct uart_port *p,
+				      struct ktermios *termios,
+				      struct ktermios *old)
+{
+	unsigned int baud = tty_termios_baud_rate(termios);
+	u32 ps, mul;
+
+	/*
+	 * The uart clk is 50Mhz, and the baud rate come from:
+	 *      baud = 50M * MUL / (DIV * PS * DLAB)
+	 *
+	 * For those basic low baud rate we can get the direct
+	 * scalar from 2746800, like 115200 = 2746800/24. For those
+	 * higher baud rate, we handle them case by case, mainly by
+	 * adjusting the MUL/PS registers, and DIV register is kept
+	 * as default value 0x3d09 to make things simple.
+	 */
+
+	ps = 0x10;
+
+	switch (baud) {
+	case 500000:
+	case 1000000:
+	case 1500000:
+	case 3000000:
+		mul = 0x3a98;
+		p->uartclk = 48000000;
+		break;
+	case 2000000:
+	case 4000000:
+		mul = 0x2710;
+		ps = 0x08;
+		p->uartclk = 64000000;
+		break;
+	case 2500000:
+		mul = 0x30d4;
+		p->uartclk = 40000000;
+		break;
+	case 3500000:
+		mul = 0x3345;
+		ps = 0x0c;
+		p->uartclk = 56000000;
+		break;
+	default:
+		mul = 0x2400;
+		p->uartclk = 29491200;
+	}
+
+	writel(ps, p->membase + INTEL_MID_UART_PS);		/* set PS */
+	writel(mul, p->membase + INTEL_MID_UART_MUL);		/* set MUL */
+
+	serial8250_do_set_termios(p, termios, old);
+}
+
+static bool intel_mid_dma_filter(struct dma_chan *chan, void *param)
+{
+	struct hsu_dma_slave *s = param;
+
+	if (s->dma_dev != chan->device->dev || s->chan_id != chan->chan_id)
+		return false;
+
+	chan->private = s;
+	return true;
+}
+
+static int intel_mid_serial_setup(struct serial_private *priv,
+				  const struct pciserial_board *board,
+				  struct uart_8250_port *port, int idx,
+				  int index, struct pci_dev *dma_dev)
+{
+	struct device *dev = port->port.dev;
+	struct uart_8250_dma *dma;
+	struct hsu_dma_slave *tx_param, *rx_param;
+
+	dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
+	if (!dma)
+		return -ENOMEM;
+
+	tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL);
+	if (!tx_param)
+		return -ENOMEM;
+
+	rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
+	if (!rx_param)
+		return -ENOMEM;
+
+	rx_param->chan_id = index * 2 + 1;
+	tx_param->chan_id = index * 2;
+
+	dma->rxconf.src_maxburst = 64;
+	dma->txconf.dst_maxburst = 64;
+
+	rx_param->dma_dev = &dma_dev->dev;
+	tx_param->dma_dev = &dma_dev->dev;
+
+	dma->fn = intel_mid_dma_filter;
+	dma->rx_param = rx_param;
+	dma->tx_param = tx_param;
+
+	port->port.type = PORT_16750;
+	port->port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE;
+	port->dma = dma;
+
+	return pci_default_setup(priv, board, port, idx);
+}
+
+#define PCI_DEVICE_ID_INTEL_PNW_UART1	0x081b
+#define PCI_DEVICE_ID_INTEL_PNW_UART2	0x081c
+#define PCI_DEVICE_ID_INTEL_PNW_UART3	0x081d
+
+static int pnw_serial_setup(struct serial_private *priv,
+			    const struct pciserial_board *board,
+			    struct uart_8250_port *port, int idx)
+{
+	struct pci_dev *pdev = priv->dev;
+	struct pci_dev *dma_dev;
+	int index;
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_INTEL_PNW_UART1:
+		index = 0;
+		break;
+	case PCI_DEVICE_ID_INTEL_PNW_UART2:
+		index = 1;
+		break;
+	case PCI_DEVICE_ID_INTEL_PNW_UART3:
+		index = 2;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 3));
+
+	port->port.set_termios = intel_mid_set_termios_50M;
+
+	return intel_mid_serial_setup(priv, board, port, idx, index, dma_dev);
+}
+
 static int
 pci_omegapci_setup(struct serial_private *priv,
 		      const struct pciserial_board *board,
@@ -1989,6 +2132,27 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_PNW_UART1,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pnw_serial_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_PNW_UART2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pnw_serial_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_PNW_UART3,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pnw_serial_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
 		.device		= PCI_DEVICE_ID_INTEL_BSW_UART1,
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
@@ -2864,6 +3028,7 @@ enum pci_board_num_t {
 	pbn_ADDIDATA_PCIe_8_3906250,
 	pbn_ce4100_1_115200,
 	pbn_byt,
+	pbn_pnw,
 	pbn_qrk,
 	pbn_omegapci,
 	pbn_NETMOS9900_2s_115200,
@@ -3630,6 +3795,11 @@ static struct pciserial_board pci_boards[] = {
 		.uart_offset	= 0x80,
 		.reg_shift      = 2,
 	},
+	[pbn_pnw] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 115200,
+	},
 	[pbn_qrk] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 1,
@@ -4006,41 +4176,41 @@ static void pciserial_remove_one(struct pci_dev *dev)
 	pci_disable_device(dev);
 }
 
-#ifdef CONFIG_PM
-static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int pciserial_suspend_one(struct device *dev)
 {
-	struct serial_private *priv = pci_get_drvdata(dev);
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct serial_private *priv = pci_get_drvdata(pdev);
 
 	if (priv)
 		pciserial_suspend_ports(priv);
 
-	pci_save_state(dev);
-	pci_set_power_state(dev, pci_choose_state(dev, state));
 	return 0;
 }
 
-static int pciserial_resume_one(struct pci_dev *dev)
+static int pciserial_resume_one(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct serial_private *priv = pci_get_drvdata(pdev);
 	int err;
-	struct serial_private *priv = pci_get_drvdata(dev);
-
-	pci_set_power_state(dev, PCI_D0);
-	pci_restore_state(dev);
 
 	if (priv) {
 		/*
 		 * The device may have been disabled.  Re-enable it.
 		 */
-		err = pci_enable_device(dev);
+		err = pci_enable_device(pdev);
 		/* FIXME: We cannot simply error out here */
 		if (err)
-			dev_err(&dev->dev, "Unable to re-enable ports, trying to continue.\n");
+			dev_err(dev, "Unable to re-enable ports, trying to continue.\n");
 		pciserial_resume_ports(priv);
 	}
 	return 0;
 }
 #endif
 
+static SIMPLE_DEV_PM_OPS(pciserial_pm_ops, pciserial_suspend_one,
+			 pciserial_resume_one);
+
 static struct pci_device_id serial_pci_tbl[] = {
 	/* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */
 	{	PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
@@ -5363,6 +5533,19 @@ static struct pci_device_id serial_pci_tbl[] = {
 		pbn_byt },
 
 	/*
+	 * Intel Penwell
+	 */
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART1,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pnw},
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART2,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pnw},
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART3,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pnw},
+
+	/*
 	 * Intel Quark x1000
 	 */
 	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_UART,
@@ -5510,10 +5693,9 @@ static struct pci_driver serial_pci_driver = {
 	.name		= "serial",
 	.probe		= pciserial_init_one,
 	.remove		= pciserial_remove_one,
-#ifdef CONFIG_PM
-	.suspend	= pciserial_suspend_one,
-	.resume		= pciserial_resume_one,
-#endif
+	.driver         = {
+		.pm     = &pciserial_pm_ops,
+	},
 	.id_table	= serial_pci_tbl,
 	.err_handler	= &serial8250_err_handler,
 };