Merge tag 'spi-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "Not much going on in the core for SPI this time but a reasonable
  amount of change in the drivers:

   - Removal of dmal_request_slave_channel() from Peter Ujfalusi.

   - More conversions of drivers to GPIO descriptors from Linus Walleij.

   - A big rework of the sh-msiof driver from Geert Uytterhoeven moving
     it over to the generic native chipselect support.

   - DMA support for the uniphier driver from Kunihiko Hayashi.

   - New driver support for HiSilcon v3xx SPI NOR controllers from John
     Garry"

* tag 'spi-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (52 commits)
  dt-binding: spi: add NPCM PSPI reset binding
  spi: pxa2xx: Avoid touching SSCR0_SSE on MMP2
  spi: spi-fsl-qspi: Ensure width is respected in spi-mem operations
  spi: npcm-pspi: modify reset support
  spi: npcm-pspi: improve spi transfer performance
  spi: spi-ti-qspi: fix warning
  spi: npcm-pspi: fix 16 bit send and receive support
  spi: pxa2xx: Add support for Intel Comet Lake PCH-V
  spi: fsl: simplify error path in of_fsl_spi_probe()
  spi: fsl-lpspi: fix only one cs-gpio working
  spi: spi-ti-qspi: optimize byte-transfers
  spi: spi-ti-qspi: support large flash devices
  spi: spi-qcom-qspi: Use device managed memory for clk_bulk_data
  MAINTAINERS: Add a maintainer for the HiSilicon v3xx SFC driver
  spi: Add HiSilicon v3xx SPI NOR flash controller driver
  dt-bindings: spi_atmel: add microchip,sam9x60-spi
  spi: bcm2835: Raise maximum number of slaves to 4
  spi: sh-msiof: Do not redefine STR while compile testing
  spi: rspi: Add support for GPIO chip selects
  spi: rspi: Add support for multiple native chip selects
  ...

1 files changed, 14 insertions, 9 deletions

diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 7222c7689c3c..85575d45901c 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -159,7 +159,7 @@
 #define SPCMD_SPIMOD_DUAL	SPCMD_SPIMOD0
 #define SPCMD_SPIMOD_QUAD	SPCMD_SPIMOD1
 #define SPCMD_SPRW		0x0010	/* SPI Read/Write Access (Dual/Quad) */
-#define SPCMD_SSLA_MASK		0x0030	/* SSL Assert Signal Setting (RSPI) */
+#define SPCMD_SSLA(i)		((i) << 4)	/* SSL Assert Signal Setting */
 #define SPCMD_BRDV_MASK		0x000c	/* Bit Rate Division Setting */
 #define SPCMD_CPOL		0x0002	/* Clock Polarity Setting */
 #define SPCMD_CPHA		0x0001	/* Clock Phase Setting */
@@ -242,6 +242,7 @@ struct spi_ops {
 	u16 mode_bits;
 	u16 flags;
 	u16 fifo_size;
+	u8 num_hw_ss;
 };
 
 /*
@@ -426,8 +427,6 @@ static int qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len)
 	return n;
 }
 
-#define set_config_register(spi, n) spi->ops->set_config_register(spi, n)
-
 static void rspi_enable_irq(const struct rspi_data *rspi, u8 enable)
 {
 	rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | enable, RSPI_SPCR);
@@ -620,9 +619,8 @@ no_dma_tx:
 		dmaengine_terminate_all(rspi->ctlr->dma_rx);
 no_dma_rx:
 	if (ret == -EAGAIN) {
-		pr_warn_once("%s %s: DMA not available, falling back to PIO\n",
-			     dev_driver_string(&rspi->ctlr->dev),
-			     dev_name(&rspi->ctlr->dev));
+		dev_warn_once(&rspi->ctlr->dev,
+			      "DMA not available, falling back to PIO\n");
 	}
 	return ret;
 }
@@ -936,12 +934,16 @@ static int rspi_prepare_message(struct spi_controller *ctlr,
 	if (spi->mode & SPI_CPHA)
 		rspi->spcmd |= SPCMD_CPHA;
 
+	/* Configure slave signal to assert */
+	rspi->spcmd |= SPCMD_SSLA(spi->cs_gpiod ? rspi->ctlr->unused_native_cs
+						: spi->chip_select);
+
 	/* CMOS output mode and MOSI signal from previous transfer */
 	rspi->sppcr = 0;
 	if (spi->mode & SPI_LOOP)
 		rspi->sppcr |= SPPCR_SPLP;
 
-	set_config_register(rspi, 8);
+	rspi->ops->set_config_register(rspi, 8);
 
 	if (msg->spi->mode &
 	    (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)) {
@@ -1123,6 +1125,7 @@ static const struct spi_ops rspi_ops = {
 	.mode_bits =		SPI_CPHA | SPI_CPOL | SPI_LOOP,
 	.flags =		SPI_CONTROLLER_MUST_TX,
 	.fifo_size =		8,
+	.num_hw_ss =		2,
 };
 
 static const struct spi_ops rspi_rz_ops = {
@@ -1131,6 +1134,7 @@ static const struct spi_ops rspi_rz_ops = {
 	.mode_bits =		SPI_CPHA | SPI_CPOL | SPI_LOOP,
 	.flags =		SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX,
 	.fifo_size =		8,	/* 8 for TX, 32 for RX */
+	.num_hw_ss =		1,
 };
 
 static const struct spi_ops qspi_ops = {
@@ -1141,6 +1145,7 @@ static const struct spi_ops qspi_ops = {
 				SPI_RX_DUAL | SPI_RX_QUAD,
 	.flags =		SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX,
 	.fifo_size =		32,
+	.num_hw_ss =		1,
 };
 
 #ifdef CONFIG_OF
@@ -1256,6 +1261,8 @@ static int rspi_probe(struct platform_device *pdev)
 	ctlr->mode_bits = ops->mode_bits;
 	ctlr->flags = ops->flags;
 	ctlr->dev.of_node = pdev->dev.of_node;
+	ctlr->use_gpio_descriptors = true;
+	ctlr->max_native_cs = rspi->ops->num_hw_ss;
 
 	ret = platform_get_irq_byname_optional(pdev, "rx");
 	if (ret < 0) {
@@ -1314,8 +1321,6 @@ error1:
 
 static const struct platform_device_id spi_driver_ids[] = {
 	{ "rspi",	(kernel_ulong_t)&rspi_ops },
-	{ "rspi-rz",	(kernel_ulong_t)&rspi_rz_ops },
-	{ "qspi",	(kernel_ulong_t)&qspi_ops },
 	{},
 };