Merge tag 'spi-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "As well as the usual driver updates and cleanups there's a few
  improvements to the core here:

   - The start of some improvements to factor out more of the SPI
     message loop into the core.  Right now this is just simplifying the
     code a bit but hopefully next time around we'll also have managed
     to roll out some noticable performance improvements which drivers
     can take advantage of.
   - Support for loading modules for ACPI enumerated SPI devices.
   - Managed registration for SPI controllers.
   - Helper for another common I/O pattern"

* tag 'spi-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (116 commits)
  spi/hspi: add device tree support
  spi: atmel: fix return value check in atmel_spi_probe()
  spi: spi-imx: only enable the clocks when we start to transfer a message
  spi/s3c64xx: Fix doubled clock disable on suspend
  spi/s3c64xx: Do not ignore return value of spi_master_resume/suspend
  spi: spi-mxs: Use u32 instead of uint32_t
  spi: spi-mxs: Don't set clock for each xfer
  spi: spi-mxs: Clean up setup_transfer function
  spi: spi-mxs: Remove check of spi mode bits
  spi: spi-mxs: Fix race in setup method
  spi: spi-mxs: Remove bogus setting of ssp clk rate field
  spi: spi-mxs: Remove full duplex check, spi core already does it
  spi: spi-mxs: Fix chip select control bits in DMA mode
  spi: spi-mxs: Fix extra CS pulses and read mode in multi-transfer messages
  spi: spi-mxs: Change flag arguments in txrx functions to bit flags
  spi: spi-mxs: Always clear INGORE_CRC, to keep CS asserted
  spi: spi-mxs: Remove mxs_spi_enable and mxs_spi_disable
  spi: spi-mxs: Always set LOCK_CS
  spi/s3c64xx: Add missing pm_runtime_put on setup fail
  spi/s3c64xx: Add missing pm_runtime_set_active() call in probe()
  ...

1 files changed, 26 insertions, 22 deletions

diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c
index 45bdf73d6868..f0f195af75d4 100644
--- a/drivers/spi/spi-bfin5xx.c
+++ b/drivers/spi/spi-bfin5xx.c
@@ -524,7 +524,7 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id)
 	timeout = jiffies + HZ;
 	while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_SPIF))
 		if (!time_before(jiffies, timeout)) {
-			dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF");
+			dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF\n");
 			break;
 		} else
 			cpu_relax();
@@ -913,8 +913,9 @@ static void bfin_spi_pump_messages(struct work_struct *work)
 	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
 					    struct spi_transfer, transfer_list);
 
-	dev_dbg(&drv_data->pdev->dev, "got a message to pump, "
-		"state is set to: baud %d, flag 0x%x, ctl 0x%x\n",
+	dev_dbg(&drv_data->pdev->dev,
+		"got a message to pump, state is set to: baud "
+		"%d, flag 0x%x, ctl 0x%x\n",
 		drv_data->cur_chip->baud, drv_data->cur_chip->flag,
 		drv_data->cur_chip->ctl_reg);
 
@@ -1013,8 +1014,8 @@ static int bfin_spi_setup(struct spi_device *spi)
 		 * but let's assume (for now) they do.
 		 */
 		if (chip_info->ctl_reg & ~bfin_ctl_reg) {
-			dev_err(&spi->dev, "do not set bits in ctl_reg "
-				"that the SPI framework manages\n");
+			dev_err(&spi->dev,
+				"do not set bits in ctl_reg that the SPI framework manages\n");
 			goto error;
 		}
 		chip->enable_dma = chip_info->enable_dma != 0
@@ -1050,17 +1051,17 @@ static int bfin_spi_setup(struct spi_device *spi)
 	chip->chip_select_num = spi->chip_select;
 	if (chip->chip_select_num < MAX_CTRL_CS) {
 		if (!(spi->mode & SPI_CPHA))
-			dev_warn(&spi->dev, "Warning: SPI CPHA not set:"
-				" Slave Select not under software control!\n"
-				" See Documentation/blackfin/bfin-spi-notes.txt");
+			dev_warn(&spi->dev,
+				"Warning: SPI CPHA not set: Slave Select not under software control!\n"
+				"See Documentation/blackfin/bfin-spi-notes.txt\n");
 
 		chip->flag = (1 << spi->chip_select) << 8;
 	} else
 		chip->cs_gpio = chip->chip_select_num - MAX_CTRL_CS;
 
 	if (chip->enable_dma && chip->pio_interrupt) {
-		dev_err(&spi->dev, "enable_dma is set, "
-				"do not set pio_interrupt\n");
+		dev_err(&spi->dev,
+			"enable_dma is set, do not set pio_interrupt\n");
 		goto error;
 	}
 	/*
@@ -1410,10 +1411,10 @@ static int bfin_spi_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int bfin_spi_suspend(struct platform_device *pdev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int bfin_spi_suspend(struct device *dev)
 {
-	struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev);
+	struct bfin_spi_master_data *drv_data = dev_get_drvdata(dev);
 	int status = 0;
 
 	status = bfin_spi_stop_queue(drv_data);
@@ -1432,9 +1433,9 @@ static int bfin_spi_suspend(struct platform_device *pdev, pm_message_t state)
 	return 0;
 }
 
-static int bfin_spi_resume(struct platform_device *pdev)
+static int bfin_spi_resume(struct device *dev)
 {
-	struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev);
+	struct bfin_spi_master_data *drv_data = dev_get_drvdata(dev);
 	int status = 0;
 
 	bfin_write(&drv_data->regs->ctl, drv_data->ctrl_reg);
@@ -1443,31 +1444,34 @@ static int bfin_spi_resume(struct platform_device *pdev)
 	/* Start the queue running */
 	status = bfin_spi_start_queue(drv_data);
 	if (status != 0) {
-		dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
+		dev_err(dev, "problem starting queue (%d)\n", status);
 		return status;
 	}
 
 	return 0;
 }
+
+static SIMPLE_DEV_PM_OPS(bfin_spi_pm_ops, bfin_spi_suspend, bfin_spi_resume);
+
+#define BFIN_SPI_PM_OPS		(&bfin_spi_pm_ops)
 #else
-#define bfin_spi_suspend NULL
-#define bfin_spi_resume NULL
-#endif				/* CONFIG_PM */
+#define BFIN_SPI_PM_OPS		NULL
+#endif
 
 MODULE_ALIAS("platform:bfin-spi");
 static struct platform_driver bfin_spi_driver = {
 	.driver	= {
 		.name	= DRV_NAME,
 		.owner	= THIS_MODULE,
+		.pm	= BFIN_SPI_PM_OPS,
 	},
-	.suspend	= bfin_spi_suspend,
-	.resume		= bfin_spi_resume,
+	.probe		= bfin_spi_probe,
 	.remove		= bfin_spi_remove,
 };
 
 static int __init bfin_spi_init(void)
 {
-	return platform_driver_probe(&bfin_spi_driver, bfin_spi_probe);
+	return platform_driver_register(&bfin_spi_driver);
 }
 subsys_initcall(bfin_spi_init);