soc: mediatek: Support MT8188 VDOSYS1 in mtk-mmsys

- Add register definitions for MT8188
- Add VDOSYS1 routing table
- Update MUTEX definitions accordingly
- Set VSYNC length from 0x40 (default) to 1 since ETHDR is bypassed

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

1 files changed, 29 insertions, 0 deletions

diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h
index 6725403d2e3a..9d8507f98b7a 100644
--- a/drivers/soc/mediatek/mtk-mmsys.h
+++ b/drivers/soc/mediatek/mtk-mmsys.h
@@ -86,6 +86,34 @@ struct mtk_mmsys_routes {
 	u32 val;
 };
 
+/**
+ * struct mtk_mmsys_driver_data - Settings of the mmsys
+ * @clk_driver: Clock driver name that the mmsys is using
+ *              (defined in drivers/clk/mediatek/clk-*.c).
+ * @routes: Routing table of the mmsys.
+ *          It provides mux settings from one module to another.
+ * @num_routes: Array size of the routes.
+ * @sw0_rst_offset: Register offset for the reset control.
+ * @num_resets: Number of reset bits that are defined
+ * @is_vppsys: Whether the mmsys is VPPSYS (Video Processing Pipe)
+ *             or VDOSYS (Video). Only VDOSYS needs to be added to drm driver.
+ * @vsync_len: VSYNC length of the MIXER.
+ *             VSYNC is usually triggered by the connector, so its length is a
+ *             fixed value when the frame rate is decided, but ETHDR and
+ *             MIXER generate their own VSYNC due to hardware design, therefore
+ *             MIXER has to sync with ETHDR by adjusting VSYNC length.
+ *             On MT8195, there is no such setting so we use the gap between
+ *             falling edge and rising edge of SOF (Start of Frame) signal to
+ *             do the job, but since MT8188, VSYNC_LEN setting is introduced to
+ *             solve the problem and is given 0x40 (ticks) as the default value.
+ *             Please notice that this value has to be set to 1 (minimum) if
+ *             ETHDR is bypassed, otherwise MIXER could wait too long and causing
+ *             underflow.
+ *
+ * Each MMSYS (multi-media system) may have different settings, they may use
+ * different clock sources, mux settings, reset control ...etc., and these
+ * differences are all stored here.
+ */
 struct mtk_mmsys_driver_data {
 	const char *clk_driver;
 	const struct mtk_mmsys_routes *routes;
@@ -93,6 +121,7 @@ struct mtk_mmsys_driver_data {
 	const u16 sw0_rst_offset;
 	const u32 num_resets;
 	const bool is_vppsys;
+	const u8 vsync_len;
 };
 
 /*