Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Olof Johansson:
 "Various driver updates for platforms:

   - A larger set of work on Tegra 2/3 around memory controller and
     regulator features, some fuse cleanups, etc..

   - MMP platform drivers, in particular for USB PHY, and other smaller
     additions.

   - Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
     and ASV (adaptive voltage), allowing the platform to run at more
     optimal operating points.

   - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas

   - Clock/reset control driver for TI/OMAP

   - Meson-A1 reset controller support

   - Qualcomm sdm845 and sda845 SoC IDs for socinfo"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
  firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
  soc: fsl: add RCPM driver
  dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
  memory: tegra: Consolidate registers definition into common header
  memory: tegra: Ensure timing control debug features are disabled
  memory: tegra: Introduce Tegra30 EMC driver
  memory: tegra: Do not handle error from wait_for_completion_timeout()
  memory: tegra: Increase handshake timeout on Tegra20
  memory: tegra: Print a brief info message about EMC timings
  memory: tegra: Pre-configure debug register on Tegra20
  memory: tegra: Include io.h instead of iopoll.h
  memory: tegra: Adapt for Tegra20 clock driver changes
  memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
  memory: tegra: Add gr2d and gr3d to DRM IOMMU group
  memory: tegra: Set DMA mask based on supported address bits
  soc: at91: Add Atmel SFR SN (Serial Number) support
  memory: atmel-ebi: switch to SPDX license identifiers
  memory: atmel-ebi: move NUM_CS definition inside EBI driver
  soc: mediatek: Refactor bus protection control
  soc: mediatek: Refactor sram control
  ...

3 files changed, 162 insertions, 0 deletions

diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
index f9ad8ad54a7d..4df32bc4c7a6 100644
--- a/drivers/soc/fsl/Kconfig
+++ b/drivers/soc/fsl/Kconfig
@@ -40,4 +40,14 @@ config DPAA2_CONSOLE
 	  /dev/dpaa2_mc_console and /dev/dpaa2_aiop_console,
 	  which can be used to dump the Management Complex and AIOP
 	  firmware logs.
+
+config FSL_RCPM
+	bool "Freescale RCPM support"
+	depends on PM_SLEEP && (ARM || ARM64)
+	help
+	  The NXP QorIQ Processors based on ARM Core have RCPM module
+	  (Run Control and Power Management), which performs all device-level
+	  tasks associated with power management, such as wakeup source control.
+	  Note that currently this driver will not support PowerPC based
+	  QorIQ processor.
 endmenu
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
index 71dee8d0d1f0..906f1cd8af01 100644
--- a/drivers/soc/fsl/Makefile
+++ b/drivers/soc/fsl/Makefile
@@ -6,6 +6,7 @@
 obj-$(CONFIG_FSL_DPAA)                 += qbman/
 obj-$(CONFIG_QUICC_ENGINE)		+= qe/
 obj-$(CONFIG_CPM)			+= qe/
+obj-$(CONFIG_FSL_RCPM)			+= rcpm.o
 obj-$(CONFIG_FSL_GUTS)			+= guts.o
 obj-$(CONFIG_FSL_MC_DPIO) 		+= dpio/
 obj-$(CONFIG_DPAA2_CONSOLE)		+= dpaa2-console.o
diff --git a/drivers/soc/fsl/rcpm.c b/drivers/soc/fsl/rcpm.c
new file mode 100644
index 000000000000..a093dbe6d2cb
--- /dev/null
+++ b/drivers/soc/fsl/rcpm.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// rcpm.c - Freescale QorIQ RCPM driver
+//
+// Copyright 2019 NXP
+//
+// Author: Ran Wang <ran.wang_1@nxp.com>
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <linux/kernel.h>
+
+#define RCPM_WAKEUP_CELL_MAX_SIZE	7
+
+struct rcpm {
+	unsigned int	wakeup_cells;
+	void __iomem	*ippdexpcr_base;
+	bool		little_endian;
+};
+
+/**
+ * rcpm_pm_prepare - performs device-level tasks associated with power
+ * management, such as programming related to the wakeup source control.
+ * @dev: Device to handle.
+ *
+ */
+static int rcpm_pm_prepare(struct device *dev)
+{
+	int i, ret, idx;
+	void __iomem *base;
+	struct wakeup_source	*ws;
+	struct rcpm		*rcpm;
+	struct device_node	*np = dev->of_node;
+	u32 value[RCPM_WAKEUP_CELL_MAX_SIZE + 1];
+	u32 setting[RCPM_WAKEUP_CELL_MAX_SIZE] = {0};
+
+	rcpm = dev_get_drvdata(dev);
+	if (!rcpm)
+		return -EINVAL;
+
+	base = rcpm->ippdexpcr_base;
+	idx = wakeup_sources_read_lock();
+
+	/* Begin with first registered wakeup source */
+	for_each_wakeup_source(ws) {
+
+		/* skip object which is not attached to device */
+		if (!ws->dev || !ws->dev->parent)
+			continue;
+
+		ret = device_property_read_u32_array(ws->dev->parent,
+				"fsl,rcpm-wakeup", value,
+				rcpm->wakeup_cells + 1);
+
+		/*  Wakeup source should refer to current rcpm device */
+		if (ret || (np->phandle != value[0]))
+			continue;
+
+		/* Property "#fsl,rcpm-wakeup-cells" of rcpm node defines the
+		 * number of IPPDEXPCR register cells, and "fsl,rcpm-wakeup"
+		 * of wakeup source IP contains an integer array: <phandle to
+		 * RCPM node, IPPDEXPCR0 setting, IPPDEXPCR1 setting,
+		 * IPPDEXPCR2 setting, etc>.
+		 *
+		 * So we will go thought them to collect setting data.
+		 */
+		for (i = 0; i < rcpm->wakeup_cells; i++)
+			setting[i] |= value[i + 1];
+	}
+
+	wakeup_sources_read_unlock(idx);
+
+	/* Program all IPPDEXPCRn once */
+	for (i = 0; i < rcpm->wakeup_cells; i++) {
+		u32 tmp = setting[i];
+		void __iomem *address = base + i * 4;
+
+		if (!tmp)
+			continue;
+
+		/* We can only OR related bits */
+		if (rcpm->little_endian) {
+			tmp |= ioread32(address);
+			iowrite32(tmp, address);
+		} else {
+			tmp |= ioread32be(address);
+			iowrite32be(tmp, address);
+		}
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops rcpm_pm_ops = {
+	.prepare =  rcpm_pm_prepare,
+};
+
+static int rcpm_probe(struct platform_device *pdev)
+{
+	struct device	*dev = &pdev->dev;
+	struct resource *r;
+	struct rcpm	*rcpm;
+	int ret;
+
+	rcpm = devm_kzalloc(dev, sizeof(*rcpm), GFP_KERNEL);
+	if (!rcpm)
+		return -ENOMEM;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r)
+		return -ENODEV;
+
+	rcpm->ippdexpcr_base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(rcpm->ippdexpcr_base)) {
+		ret =  PTR_ERR(rcpm->ippdexpcr_base);
+		return ret;
+	}
+
+	rcpm->little_endian = device_property_read_bool(
+			&pdev->dev, "little-endian");
+
+	ret = device_property_read_u32(&pdev->dev,
+			"#fsl,rcpm-wakeup-cells", &rcpm->wakeup_cells);
+	if (ret)
+		return ret;
+
+	dev_set_drvdata(&pdev->dev, rcpm);
+
+	return 0;
+}
+
+static const struct of_device_id rcpm_of_match[] = {
+	{ .compatible = "fsl,qoriq-rcpm-2.1+", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rcpm_of_match);
+
+static struct platform_driver rcpm_driver = {
+	.driver = {
+		.name = "rcpm",
+		.of_match_table = rcpm_of_match,
+		.pm	= &rcpm_pm_ops,
+	},
+	.probe = rcpm_probe,
+};
+
+module_platform_driver(rcpm_driver);