Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

39 files changed, 884 insertions, 122 deletions

diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index ae0251ef6f4e..78ed24bb6a35 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -35,6 +35,7 @@
 #include <linux/pm.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
+#include <linux/gfp.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 7c4ebe6ee18b..2b1ea3d4c4f4 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -38,6 +38,7 @@
 #include <linux/serial_8250.h>
 #include <linux/nmi.h>
 #include <linux/mutex.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -2408,6 +2409,21 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
 }
 
 static void
+serial8250_set_ldisc(struct uart_port *port)
+{
+	int line = port->line;
+
+	if (line >= port->state->port.tty->driver->num)
+		return;
+
+	if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+		port->flags |= UPF_HARDPPS_CD;
+		serial8250_enable_ms(port);
+	} else
+		port->flags &= ~UPF_HARDPPS_CD;
+}
+
+static void
 serial8250_pm(struct uart_port *port, unsigned int state,
 	      unsigned int oldstate)
 {
@@ -2628,6 +2644,7 @@ static struct uart_ops serial8250_pops = {
 	.startup	= serial8250_startup,
 	.shutdown	= serial8250_shutdown,
 	.set_termios	= serial8250_set_termios,
+	.set_ldisc	= serial8250_set_ldisc,
 	.pm		= serial8250_pm,
 	.type		= serial8250_type,
 	.release_port	= serial8250_release_port,
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 33149d982e82..d8c0ffbfa6e3 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -16,7 +16,6 @@
 #include <linux/module.h>
 #include <linux/serial_core.h>
 #include <linux/signal.h>
-#include <linux/slab.h>
 #include <linux/types.h>
 
 #include <asm/hardware.h>
diff --git a/drivers/serial/8250_hp300.c b/drivers/serial/8250_hp300.c
index 0e1410f2c033..c13438c93012 100644
--- a/drivers/serial/8250_hp300.c
+++ b/drivers/serial/8250_hp300.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/dio.h>
 #include <linux/console.h>
+#include <linux/slab.h>
 #include <asm/io.h>
 
 #include "8250.h"
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 24485cc62ff8..4822cb50cd0f 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -348,6 +348,8 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	{	"FUJ02E6",		0	},
 	/* Fujitsu Wacom 2FGT Tablet PC device */
 	{	"FUJ02E7",		0	},
+	/* Fujitsu Wacom 1FGT Tablet PC device */
+	{	"FUJ02E9",		0	},
 	/*
 	 * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
 	 * disguise)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 746e07033dce..f55c49475a8c 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
-	depends on ARM && PLAT_S3C
+	depends on ARM && PLAT_SAMSUNG
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -455,11 +455,18 @@ config SERIAL_SAMSUNG
 	  provide all of these ports, depending on how the serial port
 	  pins are configured.
 
+config SERIAL_SAMSUNG_UARTS_4
+	bool
+	depends on ARM && PLAT_SAMSUNG
+	default y if CPU_S3C2443
+	help
+	  Internal node for the common case of 4 Samsung compatible UARTs
+
 config SERIAL_SAMSUNG_UARTS
 	int
-	depends on ARM && PLAT_S3C
+	depends on ARM && PLAT_SAMSUNG
 	default 2 if ARCH_S3C2400
-	default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
+	default 4 if SERIAL_SAMSUNG_UARTS_4
 	default 3
 	help
 	  Select the number of available UART ports for the Samsung S3C
@@ -526,20 +533,30 @@ config SERIAL_S3C24A0
 	  Serial port support for the Samsung S3C24A0 SoC
 
 config SERIAL_S3C6400
-	tristate "Samsung S3C6400/S3C6410 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410)
+	tristate "Samsung S3C6400/S3C6410/S5P6440 Seria port support"
+	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440)
+	select SERIAL_SAMSUNG_UARTS_4
 	default y
 	help
-	  Serial port support for the Samsung S3C6400 and S3C6410
+	  Serial port support for the Samsung S3C6400, S3C6410 and S5P6440
 	  SoCs
 
 config SERIAL_S5PC100
 	tristate "Samsung S5PC100 Serial port support"
 	depends on SERIAL_SAMSUNG && CPU_S5PC100
+	select SERIAL_SAMSUNG_UARTS_4
 	default y
 	help
 	  Serial port support for the Samsung S5PC100 SoCs
 
+config SERIAL_S5PV210
+	tristate "Samsung S5PV210 Serial port support"
+	depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442)
+	select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210
+	default y
+	help
+	  Serial port support for Samsung's S5P Family of SoC's
+
 config SERIAL_MAX3100
 	tristate "MAX3100 support"
 	depends on SPI
@@ -996,7 +1013,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
 
 config SERIAL_SH_SCI
 	tristate "SuperH SCI(F) serial port support"
-	depends on HAVE_CLK && (SUPERH || H8300)
+	depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE)
 	select SERIAL_CORE
 
 config SERIAL_SH_SCI_NR_UARTS
@@ -1009,6 +1026,10 @@ config SERIAL_SH_SCI_CONSOLE
 	depends on SERIAL_SH_SCI=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_SH_SCI_DMA
+	bool "DMA support"
+	depends on SERIAL_SH_SCI && SH_DMAE && EXPERIMENTAL
+
 config SERIAL_PNX8XXX
 	bool "Enable PNX8XXX SoCs' UART Support"
 	depends on MIPS && (SOC_PNX8550 || SOC_PNX833X)
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 5548fe7df61d..6aa4723b74ee 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
 obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
 obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
 obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
+obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 429a8ae86933..b09a638d051f 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -47,6 +47,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
 #include <linux/clk.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 
@@ -471,6 +472,20 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
 	spin_unlock_irqrestore(&uap->port.lock, flags);
 }
 
+static void pl010_set_ldisc(struct uart_port *port)
+{
+	int line = port->line;
+
+	if (line >= port->state->port.tty->driver->num)
+		return;
+
+	if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+		port->flags |= UPF_HARDPPS_CD;
+		pl010_enable_ms(port);
+	} else
+		port->flags &= ~UPF_HARDPPS_CD;
+}
+
 static const char *pl010_type(struct uart_port *port)
 {
 	return port->type == PORT_AMBA ? "AMBA" : NULL;
@@ -531,6 +546,7 @@ static struct uart_ops amba_pl010_pops = {
 	.startup	= pl010_startup,
 	.shutdown	= pl010_shutdown,
 	.set_termios	= pl010_set_termios,
+	.set_ldisc	= pl010_set_ldisc,
 	.type		= pl010_type,
 	.release_port	= pl010_release_port,
 	.request_port	= pl010_request_port,
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index ce6c35333ff7..743ebf5f16da 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -47,6 +47,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
 #include <linux/clk.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 #include <asm/sizes.h>
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index fcf273e3f48c..96f7e7484fee 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -14,6 +14,7 @@
 
 #include <linux/module.h>
 #include <linux/ioport.h>
+#include <linux/gfp.h>
 #include <linux/io.h>
 #include <linux/init.h>
 #include <linux/console.h>
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 7c72888fbf94..c88f8ad3ff82 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/sysrq.h>
+#include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 1b94c56ec239..3fc1d66e32c6 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -29,6 +29,7 @@
 
 #include <linux/module.h>
 #include <linux/tty.h>
+#include <linux/gfp.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/serial.h>
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index a9802e76b5fa..814ac006393f 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -30,6 +30,7 @@
 #include <linux/module.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/console.h>
@@ -61,7 +62,7 @@ void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
 	void __iomem *pram;
 	unsigned long offset;
 	struct resource res;
-	unsigned long len;
+	resource_size_t len;
 
 	/* Don't remap parameter RAM if it has already been initialized
 	 * during console setup.
@@ -74,7 +75,7 @@ void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
 	if (of_address_to_resource(np, 1, &res))
 		return NULL;
 
-	len = 1 + res.end - res.start;
+	len = resource_size(&res);
 	pram = ioremap(res.start, len);
 	if (!pram)
 		return NULL;
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index d00fcf8e6c70..4315b23590bd 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -46,6 +46,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/rational.h>
+#include <linux/slab.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -440,7 +441,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
 
 		temp = readl(sport->port.membase + USR2);
 		if (temp & USR2_BRCD) {
-			writel(temp | USR2_BRCD, sport->port.membase + USR2);
+			writel(USR2_BRCD, sport->port.membase + USR2);
 			if (uart_handle_break(&sport->port))
 				continue;
 		}
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index 23ba6b40b3ac..f164ba4eba02 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -20,6 +20,7 @@
 #include <linux/pci.h>
 #include <linux/serial_core.h>
 #include <linux/ioc3.h>
+#include <linux/slab.h>
 
 /*
  * Interesting things about the ioc3
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index 836d9ab4f729..8ad28fc64926 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -22,6 +22,7 @@
 #include <linux/pci.h>
 #include <linux/ioc4.h>
 #include <linux/serial_core.h>
+#include <linux/slab.h>
 
 /*
  * interesting things about the ioc4
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 12cb5e446a4f..eaf545014119 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -26,6 +26,7 @@
  ***********************************************************************/
 #include <linux/moduleparam.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 
 #include "jsm.h"
 
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 5673ca9dfdc8..7a4a914ecff0 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -30,6 +30,7 @@
 #include <linux/serial_reg.h>
 #include <linux/delay.h>	/* For udelay */
 #include <linux/pci.h>
+#include <linux/slab.h>
 
 #include "jsm.h"
 
diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c
index 3c30c56aa2e1..3351c3bd59e4 100644
--- a/drivers/serial/max3100.c
+++ b/drivers/serial/max3100.c
@@ -41,6 +41,7 @@
 #define MAX_MAX3100 4
 
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index 7bb5fee639e3..b5aaef965f24 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -263,6 +263,7 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
 	}
 
 	spin_lock_irqsave(&port->lock, flags);
+	uart_update_timeout(port, termios->c_cflag, baud);
 	writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
 	writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
 	writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR);
@@ -379,6 +380,7 @@ static irqreturn_t mcf_interrupt(int irq, void *data)
 static void mcf_config_port(struct uart_port *port, int flags)
 {
 	port->type = PORT_MCF;
+	port->fifosize = MCFUART_TXFIFOSIZE;
 
 	/* Clear mask, so no surprise interrupts. */
 	writeb(0, port->membase + MCFUART_UIMR);
@@ -424,7 +426,7 @@ static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser)
 /*
  *	Define the basic serial functions we support.
  */
-static struct uart_ops mcf_uart_ops = {
+static const struct uart_ops mcf_uart_ops = {
 	.tx_empty	= mcf_tx_empty,
 	.get_mctrl	= mcf_get_mctrl,
 	.set_mctrl	= mcf_set_mctrl,
@@ -443,7 +445,7 @@ static struct uart_ops mcf_uart_ops = {
 	.verify_port	= mcf_verify_port,
 };
 
-static struct mcf_uart mcf_ports[3];
+static struct mcf_uart mcf_ports[4];
 
 #define	MCF_MAXPORTS	ARRAY_SIZE(mcf_ports)
 
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 3119fddaedb5..a176ab4bd65b 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -29,39 +29,6 @@
  * kind, whether express or implied.
  */
 
-/* Platform device Usage :
- *
- * Since PSCs can have multiple function, the correct driver for each one
- * is selected by calling mpc52xx_match_psc_function(...). The function
- * handled by this driver is "uart".
- *
- * The driver init all necessary registers to place the PSC in uart mode without
- * DCD. However, the pin multiplexing aren't changed and should be set either
- * by the bootloader or in the platform init code.
- *
- * The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2,
- * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
- * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
- * fpr the console code : without this 1:1 mapping, at early boot time, when we
- * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it
- * will be mapped to.
- */
-
-/* OF Platform device Usage :
- *
- * This driver is only used for PSCs configured in uart mode.  The device
- * tree will have a node for each PSC with "mpc52xx-psc-uart" in the compatible
- * list.
- *
- * By default, PSC devices are enumerated in the order they are found.  However
- * a particular PSC number can be forces by adding 'device_no = <port#>'
- * to the device node.
- *
- * The driver init all necessary registers to place the PSC in uart mode without
- * DCD. However, the pin multiplexing aren't changed and should be set either
- * by the bootloader or in the platform init code.
- */
-
 #undef DEBUG
 
 #include <linux/device.h>
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index b5496c28e60b..55e113a0be03 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -70,6 +70,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/mv643xx.h>
 #include <linux/platform_device.h>
+#include <linux/gfp.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 7571aaa138b0..9711e06a8374 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -22,7 +22,6 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/console.h>
-#include <linux/slab.h>
 #include <linux/delay.h> /* for udelay */
 #include <linux/device.h>
 #include <asm/io.h>
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index cdf172eda2e3..4abfebdb0fcc 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -11,6 +11,7 @@
  */
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/of_platform.h>
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index f020de1cdd50..700e10833bf9 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -54,7 +54,6 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/console.h>
-#include <linux/slab.h>
 #include <linux/adb.h>
 #include <linux/pmu.h>
 #include <linux/bitops.h>
@@ -753,8 +752,10 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
 		uap->curregs[R5] = new_reg;
 
 		/* NOTE: Not subject to 'transmitter active' rule. */
-		if (ZS_IS_ASLEEP(uap))
+		if (ZS_IS_ASLEEP(uap)) {
+			spin_unlock_irqrestore(&port->lock, flags);
 			return;
+		}
 		write_zsreg(uap, R5, uap->curregs[R5]);
 	}
 
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 56ee082157aa..1102a39b44f5 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -44,6 +44,7 @@
 #include <linux/serial_core.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 struct uart_pxa_port {
 	struct uart_port        port;
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index ce75e28e36ef..1700b1a2fb7e 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -102,6 +102,7 @@ static struct s3c24xx_uart_info s3c2412_uart_inf = {
 	.name		= "Samsung S3C2412 UART",
 	.type		= PORT_S3C2412,
 	.fifosize	= 64,
+	.has_divslot	= 1,
 	.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
 	.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
 	.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c
new file mode 100644
index 000000000000..8dc03837617b
--- /dev/null
+++ b/drivers/serial/s5pv210.c
@@ -0,0 +1,154 @@
+/* linux/drivers/serial/s5pv210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on drivers/serial/s3c6400.c
+ *
+ * Driver for Samsung S5PV210 SoC UARTs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <plat/regs-serial.h>
+#include "samsung.h"
+
+static int s5pv210_serial_setsource(struct uart_port *port,
+					struct s3c24xx_uart_clksrc *clk)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	if (strcmp(clk->name, "pclk") == 0)
+		ucon &= ~S5PV210_UCON_CLKMASK;
+	else if (strcmp(clk->name, "uclk1") == 0)
+		ucon |= S5PV210_UCON_CLKMASK;
+	else {
+		printk(KERN_ERR "unknown clock source %s\n", clk->name);
+		return -EINVAL;
+	}
+
+	wr_regl(port, S3C2410_UCON, ucon);
+	return 0;
+}
+
+
+static int s5pv210_serial_getsource(struct uart_port *port,
+					struct s3c24xx_uart_clksrc *clk)
+{
+	u32 ucon = rd_regl(port, S3C2410_UCON);
+
+	clk->divisor = 1;
+
+	switch (ucon & S5PV210_UCON_CLKMASK) {
+	case S5PV210_UCON_PCLK:
+		clk->name = "pclk";
+		break;
+	case S5PV210_UCON_UCLK:
+		clk->name = "uclk1";
+		break;
+	}
+
+	return 0;
+}
+
+static int s5pv210_serial_resetport(struct uart_port *port,
+					struct s3c2410_uartcfg *cfg)
+{
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	ucon &= S5PV210_UCON_CLKMASK;
+	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
+	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+	/* reset both fifos */
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+	return 0;
+}
+
+#define S5PV210_UART_DEFAULT_INFO(fifo_size)			\
+		.name		= "Samsung S5PV210 UART0",	\
+		.type		= PORT_S3C6400,			\
+		.fifosize	= fifo_size,			\
+		.has_divslot	= 1,				\
+		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,	\
+		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,	\
+		.rx_fifofull	= S5PV210_UFSTAT_RXFULL,	\
+		.tx_fifofull	= S5PV210_UFSTAT_TXFULL,	\
+		.tx_fifomask	= S5PV210_UFSTAT_TXMASK,	\
+		.tx_fifoshift	= S5PV210_UFSTAT_TXSHIFT,	\
+		.get_clksrc	= s5pv210_serial_getsource,	\
+		.set_clksrc	= s5pv210_serial_setsource,	\
+		.reset_port	= s5pv210_serial_resetport
+
+static struct s3c24xx_uart_info s5p_port_fifo256 = {
+	S5PV210_UART_DEFAULT_INFO(256),
+};
+
+static struct s3c24xx_uart_info s5p_port_fifo64 = {
+	S5PV210_UART_DEFAULT_INFO(64),
+};
+
+static struct s3c24xx_uart_info s5p_port_fifo16 = {
+	S5PV210_UART_DEFAULT_INFO(16),
+};
+
+static struct s3c24xx_uart_info *s5p_uart_inf[] = {
+	[0] = &s5p_port_fifo256,
+	[1] = &s5p_port_fifo64,
+	[2] = &s5p_port_fifo16,
+	[3] = &s5p_port_fifo16,
+};
+
+/* device management */
+static int s5p_serial_probe(struct platform_device *pdev)
+{
+	return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]);
+}
+
+static struct platform_driver s5p_serial_drv = {
+	.probe		= s5p_serial_probe,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
+	.driver		= {
+		.name	= "s5pv210-uart",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init s5pv210_serial_console_init(void)
+{
+	return s3c24xx_serial_initconsole(&s5p_serial_drv, s5p_uart_inf);
+}
+
+console_initcall(s5pv210_serial_console_init);
+
+static int __init s5p_serial_init(void)
+{
+	return s3c24xx_serial_init(&s5p_serial_drv, *s5p_uart_inf);
+}
+
+static void __exit s5p_serial_exit(void)
+{
+	platform_driver_unregister(&s5p_serial_drv);
+}
+
+module_init(s5p_serial_init);
+module_exit(s5p_serial_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s5pv210-uart");
+MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support");
+MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 52e3df113ec0..a9d6c5626a0a 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -1271,7 +1271,7 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
 	unsigned long ufstat, utrstat;
 
 	if (ufcon & S3C2410_UFCON_FIFOMODE) {
-		/* fifo mode - check ammount of data in fifo registers... */
+		/* fifo mode - check amount of data in fifo registers... */
 
 		ufstat = rd_regl(port, S3C2410_UFSTAT);
 		return (ufstat & info->tx_fifofull) ? 0 : 1;
@@ -1374,7 +1374,7 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud,
  * data.
 */
 
-static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
+static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info)
 {
 	struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
 	struct platform_device **platdev_ptr;
@@ -1385,7 +1385,7 @@ static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
 	platdev_ptr = s3c24xx_uart_devs;
 
 	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
-		s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
+		s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr);
 	}
 
 	return 0;
@@ -1451,7 +1451,7 @@ static struct console s3c24xx_serial_console = {
 };
 
 int s3c24xx_serial_initconsole(struct platform_driver *drv,
-			       struct s3c24xx_uart_info *info)
+			       struct s3c24xx_uart_info **info)
 
 {
 	struct platform_device *dev = s3c24xx_uart_devs[0];
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 1fb22343df42..0ac06a07d25f 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -75,19 +75,24 @@ extern int s3c24xx_serial_probe(struct platform_device *dev,
 extern int __devexit s3c24xx_serial_remove(struct platform_device *dev);
 
 extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
-				      struct s3c24xx_uart_info *uart);
+				      struct s3c24xx_uart_info **uart);
 
 extern int s3c24xx_serial_init(struct platform_driver *drv,
 			       struct s3c24xx_uart_info *info);
 
 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
 
-#define s3c24xx_console_init(__drv, __inf)			\
-static int __init s3c_serial_console_init(void)			\
-{								\
-	return s3c24xx_serial_initconsole(__drv, __inf);	\
-}								\
-								\
+#define s3c24xx_console_init(__drv, __inf)				\
+static int __init s3c_serial_console_init(void)				\
+{									\
+	struct s3c24xx_uart_info *uinfo[CONFIG_SERIAL_SAMSUNG_UARTS];	\
+	int i;								\
+									\
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)		\
+		uinfo[i] = __inf;					\
+	return s3c24xx_serial_initconsole(__drv, uinfo);		\
+}									\
+									\
 console_initcall(s3c_serial_console_init)
 
 #else
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index e91db4b38012..8cfa5b12ea7a 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -105,6 +105,10 @@ struct serial_cfg_mem {
  * manfid 0x0160, 0x0104
  * This card appears to have a 14.7456MHz clock.
  */
+/* Generic Modem: MD55x (GPRS/EDGE) have
+ * Elan VPU16551 UART with 14.7456MHz oscillator
+ * manfid 0x015D, 0x4C45
+ */
 static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
 {
 	port->uartclk = 14745600;
@@ -196,6 +200,11 @@ static const struct serial_quirk quirks[] = {
 		.multi	= -1,
 		.setup	= quirk_setup_brainboxes_0104,
 	}, {
+		.manfid	= 0x015D,
+		.prodid	= 0x4C45,
+		.multi	= -1,
+		.setup	= quirk_setup_brainboxes_0104,
+	}, {
 		.manfid	= MANFID_IBM,
 		.prodid	= ~0,
 		.multi	= -1,
@@ -745,6 +754,7 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
 	PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 2e71bbc04dac..b1962025b1aa 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -650,6 +650,7 @@ static struct console ks8695_console = {
 
 static int __init ks8695_console_init(void)
 {
+	add_preferred_console(SERIAL_KS8695_DEVNAME, 0, NULL);
 	register_console(&ks8695_console);
 	return 0;
 }
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 42f3333c4ad0..8eb094c1f61b 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -48,6 +48,9 @@
 #include <linux/ctype.h>
 #include <linux/err.h>
 #include <linux/list.h>
+#include <linux/dmaengine.h>
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
 
 #ifdef CONFIG_SUPERH
 #include <asm/sh_bios.h>
@@ -84,6 +87,27 @@ struct sci_port {
 	struct clk		*dclk;
 
 	struct list_head	node;
+	struct dma_chan			*chan_tx;
+	struct dma_chan			*chan_rx;
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	struct device			*dma_dev;
+	enum sh_dmae_slave_chan_id	slave_tx;
+	enum sh_dmae_slave_chan_id	slave_rx;
+	struct dma_async_tx_descriptor	*desc_tx;
+	struct dma_async_tx_descriptor	*desc_rx[2];
+	dma_cookie_t			cookie_tx;
+	dma_cookie_t			cookie_rx[2];
+	dma_cookie_t			active_rx;
+	struct scatterlist		sg_tx;
+	unsigned int			sg_len_tx;
+	struct scatterlist		sg_rx[2];
+	size_t				buf_len_rx;
+	struct sh_dmae_slave		param_tx;
+	struct sh_dmae_slave		param_rx;
+	struct work_struct		work_tx;
+	struct work_struct		work_rx;
+	struct timer_list		rx_timer;
+#endif
 };
 
 struct sh_sci_priv {
@@ -269,29 +293,44 @@ static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
     defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785) || \
     defined(CONFIG_CPU_SUBTYPE_SH7786)
-static inline int scif_txroom(struct uart_port *port)
+static int scif_txfill(struct uart_port *port)
+{
+	return sci_in(port, SCTFDR) & 0xff;
+}
+
+static int scif_txroom(struct uart_port *port)
 {
-	return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff);
+	return SCIF_TXROOM_MAX - scif_txfill(port);
 }
 
-static inline int scif_rxroom(struct uart_port *port)
+static int scif_rxfill(struct uart_port *port)
 {
 	return sci_in(port, SCRFDR) & 0xff;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
-static inline int scif_txroom(struct uart_port *port)
+static int scif_txfill(struct uart_port *port)
 {
-	if ((port->mapbase == 0xffe00000) ||
-	    (port->mapbase == 0xffe08000)) {
+	if (port->mapbase == 0xffe00000 ||
+	    port->mapbase == 0xffe08000)
 		/* SCIF0/1*/
-		return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff);
-	} else {
+		return sci_in(port, SCTFDR) & 0xff;
+	else
 		/* SCIF2 */
-		return SCIF2_TXROOM_MAX - (sci_in(port, SCFDR) >> 8);
-	}
+		return sci_in(port, SCFDR) >> 8;
 }
 
-static inline int scif_rxroom(struct uart_port *port)
+static int scif_txroom(struct uart_port *port)
+{
+	if (port->mapbase == 0xffe00000 ||
+	    port->mapbase == 0xffe08000)
+		/* SCIF0/1*/
+		return SCIF_TXROOM_MAX - scif_txfill(port);
+	else
+		/* SCIF2 */
+		return SCIF2_TXROOM_MAX - scif_txfill(port);
+}
+
+static int scif_rxfill(struct uart_port *port)
 {
 	if ((port->mapbase == 0xffe00000) ||
 	    (port->mapbase == 0xffe08000)) {
@@ -303,23 +342,33 @@ static inline int scif_rxroom(struct uart_port *port)
 	}
 }
 #else
-static inline int scif_txroom(struct uart_port *port)
+static int scif_txfill(struct uart_port *port)
+{
+	return sci_in(port, SCFDR) >> 8;
+}
+
+static int scif_txroom(struct uart_port *port)
 {
-	return SCIF_TXROOM_MAX - (sci_in(port, SCFDR) >> 8);
+	return SCIF_TXROOM_MAX - scif_txfill(port);
 }
 
-static inline int scif_rxroom(struct uart_port *port)
+static int scif_rxfill(struct uart_port *port)
 {
 	return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
 }
 #endif
 
-static inline int sci_txroom(struct uart_port *port)
+static int sci_txfill(struct uart_port *port)
+{
+	return !(sci_in(port, SCxSR) & SCI_TDRE);
+}
+
+static int sci_txroom(struct uart_port *port)
 {
-	return (sci_in(port, SCxSR) & SCI_TDRE) != 0;
+	return !sci_txfill(port);
 }
 
-static inline int sci_rxroom(struct uart_port *port)
+static int sci_rxfill(struct uart_port *port)
 {
 	return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
 }
@@ -406,9 +455,9 @@ static inline void sci_receive_chars(struct uart_port *port)
 
 	while (1) {
 		if (port->type == PORT_SCI)
-			count = sci_rxroom(port);
+			count = sci_rxfill(port);
 		else
-			count = scif_rxroom(port);
+			count = scif_rxfill(port);
 
 		/* Don't copy more bytes than there is room for in the buffer */
 		count = tty_buffer_request_room(tty, count);
@@ -453,10 +502,10 @@ static inline void sci_receive_chars(struct uart_port *port)
 				}
 
 				/* Store data and status */
-				if (status&SCxSR_FER(port)) {
+				if (status & SCxSR_FER(port)) {
 					flag = TTY_FRAME;
 					dev_notice(port->dev, "frame error\n");
-				} else if (status&SCxSR_PER(port)) {
+				} else if (status & SCxSR_PER(port)) {
 					flag = TTY_PARITY;
 					dev_notice(port->dev, "parity error\n");
 				} else
@@ -618,13 +667,39 @@ static inline int sci_handle_breaks(struct uart_port *port)
 	return copied;
 }
 
-static irqreturn_t sci_rx_interrupt(int irq, void *port)
+static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
 {
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	struct uart_port *port = ptr;
+	struct sci_port *s = to_sci_port(port);
+
+	if (s->chan_rx) {
+		unsigned long tout;
+		u16 scr = sci_in(port, SCSCR);
+		u16 ssr = sci_in(port, SCxSR);
+
+		/* Disable future Rx interrupts */
+		sci_out(port, SCSCR, scr & ~SCI_CTRL_FLAGS_RIE);
+		/* Clear current interrupt */
+		sci_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port)));
+		/* Calculate delay for 1.5 DMA buffers */
+		tout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 /
+			port->fifosize / 2;
+		dev_dbg(port->dev, "Rx IRQ: setup timeout in %lu ms\n",
+			tout * 1000 / HZ);
+		if (tout < 2)
+			tout = 2;
+		mod_timer(&s->rx_timer, jiffies + tout);
+
+		return IRQ_HANDLED;
+	}
+#endif
+
 	/* I think sci_receive_chars has to be called irrespective
 	 * of whether the I_IXOFF is set, otherwise, how is the interrupt
 	 * to be disabled?
 	 */
-	sci_receive_chars(port);
+	sci_receive_chars(ptr);
 
 	return IRQ_HANDLED;
 }
@@ -680,6 +755,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 {
 	unsigned short ssr_status, scr_status, err_enabled;
 	struct uart_port *port = ptr;
+	struct sci_port *s = to_sci_port(port);
 	irqreturn_t ret = IRQ_NONE;
 
 	ssr_status = sci_in(port, SCxSR);
@@ -687,10 +763,15 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 	err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE);
 
 	/* Tx Interrupt */
-	if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE))
+	if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE) &&
+	    !s->chan_tx)
 		ret = sci_tx_interrupt(irq, ptr);
-	/* Rx Interrupt */
-	if ((ssr_status & SCxSR_RDxF(port)) && (scr_status & SCI_CTRL_FLAGS_RIE))
+	/*
+	 * Rx Interrupt: if we're using DMA, the DMA controller clears RDF /
+	 * DR flags
+	 */
+	if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) &&
+	    (scr_status & SCI_CTRL_FLAGS_RIE))
 		ret = sci_rx_interrupt(irq, ptr);
 	/* Error Interrupt */
 	if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
@@ -800,7 +881,9 @@ static void sci_free_irq(struct sci_port *port)
 static unsigned int sci_tx_empty(struct uart_port *port)
 {
 	unsigned short status = sci_in(port, SCxSR);
-	return status & SCxSR_TEND(port) ? TIOCSER_TEMT : 0;
+	unsigned short in_tx_fifo = scif_txfill(port);
+
+	return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0;
 }
 
 static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
@@ -812,16 +895,297 @@ static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
 
 static unsigned int sci_get_mctrl(struct uart_port *port)
 {
-	/* This routine is used for geting signals of: DTR, DCD, DSR, RI,
+	/* This routine is used for getting signals of: DTR, DCD, DSR, RI,
 	   and CTS/RTS */
 
 	return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR;
 }
 
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+static void sci_dma_tx_complete(void *arg)
+{
+	struct sci_port *s = arg;
+	struct uart_port *port = &s->port;
+	struct circ_buf *xmit = &port->state->xmit;
+	unsigned long flags;
+
+	dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	xmit->tail += s->sg_tx.length;
+	xmit->tail &= UART_XMIT_SIZE - 1;
+
+	port->icount.tx += s->sg_tx.length;
+
+	async_tx_ack(s->desc_tx);
+	s->cookie_tx = -EINVAL;
+	s->desc_tx = NULL;
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_chars_pending(xmit))
+		schedule_work(&s->work_tx);
+}
+
+/* Locking: called with port lock held */
+static int sci_dma_rx_push(struct sci_port *s, struct tty_struct *tty,
+			   size_t count)
+{
+	struct uart_port *port = &s->port;
+	int i, active, room;
+
+	room = tty_buffer_request_room(tty, count);
+
+	if (s->active_rx == s->cookie_rx[0]) {
+		active = 0;
+	} else if (s->active_rx == s->cookie_rx[1]) {
+		active = 1;
+	} else {
+		dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
+		return 0;
+	}
+
+	if (room < count)
+		dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
+			 count - room);
+	if (!room)
+		return room;
+
+	for (i = 0; i < room; i++)
+		tty_insert_flip_char(tty, ((u8 *)sg_virt(&s->sg_rx[active]))[i],
+				     TTY_NORMAL);
+
+	port->icount.rx += room;
+
+	return room;
+}
+
+static void sci_dma_rx_complete(void *arg)
+{
+	struct sci_port *s = arg;
+	struct uart_port *port = &s->port;
+	struct tty_struct *tty = port->state->port.tty;
+	unsigned long flags;
+	int count;
+
+	dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	count = sci_dma_rx_push(s, tty, s->buf_len_rx);
+
+	mod_timer(&s->rx_timer, jiffies + msecs_to_jiffies(5));
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (count)
+		tty_flip_buffer_push(tty);
+
+	schedule_work(&s->work_rx);
+}
+
+static void sci_start_rx(struct uart_port *port);
+static void sci_start_tx(struct uart_port *port);
+
+static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
+{
+	struct dma_chan *chan = s->chan_rx;
+	struct uart_port *port = &s->port;
+
+	s->chan_rx = NULL;
+	s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
+	dma_release_channel(chan);
+	dma_free_coherent(port->dev, s->buf_len_rx * 2,
+			  sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0]));
+	if (enable_pio)
+		sci_start_rx(port);
+}
+
+static void sci_tx_dma_release(struct sci_port *s, bool enable_pio)
+{
+	struct dma_chan *chan = s->chan_tx;
+	struct uart_port *port = &s->port;
+
+	s->chan_tx = NULL;
+	s->cookie_tx = -EINVAL;
+	dma_release_channel(chan);
+	if (enable_pio)
+		sci_start_tx(port);
+}
+
+static void sci_submit_rx(struct sci_port *s)
+{
+	struct dma_chan *chan = s->chan_rx;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		struct scatterlist *sg = &s->sg_rx[i];
+		struct dma_async_tx_descriptor *desc;
+
+		desc = chan->device->device_prep_slave_sg(chan,
+			sg, 1, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT);
+
+		if (desc) {
+			s->desc_rx[i] = desc;
+			desc->callback = sci_dma_rx_complete;
+			desc->callback_param = s;
+			s->cookie_rx[i] = desc->tx_submit(desc);
+		}
+
+		if (!desc || s->cookie_rx[i] < 0) {
+			if (i) {
+				async_tx_ack(s->desc_rx[0]);
+				s->cookie_rx[0] = -EINVAL;
+			}
+			if (desc) {
+				async_tx_ack(desc);
+				s->cookie_rx[i] = -EINVAL;
+			}
+			dev_warn(s->port.dev,
+				 "failed to re-start DMA, using PIO\n");
+			sci_rx_dma_release(s, true);
+			return;
+		}
+	}
+
+	s->active_rx = s->cookie_rx[0];
+
+	dma_async_issue_pending(chan);
+}
+
+static void work_fn_rx(struct work_struct *work)
+{
+	struct sci_port *s = container_of(work, struct sci_port, work_rx);
+	struct uart_port *port = &s->port;
+	struct dma_async_tx_descriptor *desc;
+	int new;
+
+	if (s->active_rx == s->cookie_rx[0]) {
+		new = 0;
+	} else if (s->active_rx == s->cookie_rx[1]) {
+		new = 1;
+	} else {
+		dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
+		return;
+	}
+	desc = s->desc_rx[new];
+
+	if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) !=
+	    DMA_SUCCESS) {
+		/* Handle incomplete DMA receive */
+		struct tty_struct *tty = port->state->port.tty;
+		struct dma_chan *chan = s->chan_rx;
+		struct sh_desc *sh_desc = container_of(desc, struct sh_desc,
+						       async_tx);
+		unsigned long flags;
+		int count;
+
+		chan->device->device_terminate_all(chan);
+		dev_dbg(port->dev, "Read %u bytes with cookie %d\n",
+			sh_desc->partial, sh_desc->cookie);
+
+		spin_lock_irqsave(&port->lock, flags);
+		count = sci_dma_rx_push(s, tty, sh_desc->partial);
+		spin_unlock_irqrestore(&port->lock, flags);
+
+		if (count)
+			tty_flip_buffer_push(tty);
+
+		sci_submit_rx(s);
+
+		return;
+	}
+
+	s->cookie_rx[new] = desc->tx_submit(desc);
+	if (s->cookie_rx[new] < 0) {
+		dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n");
+		sci_rx_dma_release(s, true);
+		return;
+	}
+
+	dev_dbg(port->dev, "%s: cookie %d #%d\n", __func__,
+		s->cookie_rx[new], new);
+
+	s->active_rx = s->cookie_rx[!new];
+}
+
+static void work_fn_tx(struct work_struct *work)
+{
+	struct sci_port *s = container_of(work, struct sci_port, work_tx);
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *chan = s->chan_tx;
+	struct uart_port *port = &s->port;
+	struct circ_buf *xmit = &port->state->xmit;
+	struct scatterlist *sg = &s->sg_tx;
+
+	/*
+	 * DMA is idle now.
+	 * Port xmit buffer is already mapped, and it is one page... Just adjust
+	 * offsets and lengths. Since it is a circular buffer, we have to
+	 * transmit till the end, and then the rest. Take the port lock to get a
+	 * consistent xmit buffer state.
+	 */
+	spin_lock_irq(&port->lock);
+	sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
+	sg->dma_address = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
+		sg->offset;
+	sg->length = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
+		CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
+	sg->dma_length = sg->length;
+	spin_unlock_irq(&port->lock);
+
+	BUG_ON(!sg->length);
+
+	desc = chan->device->device_prep_slave_sg(chan,
+			sg, s->sg_len_tx, DMA_TO_DEVICE,
+			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc) {
+		/* switch to PIO */
+		sci_tx_dma_release(s, true);
+		return;
+	}
+
+	dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
+
+	spin_lock_irq(&port->lock);
+	s->desc_tx = desc;
+	desc->callback = sci_dma_tx_complete;
+	desc->callback_param = s;
+	spin_unlock_irq(&port->lock);
+	s->cookie_tx = desc->tx_submit(desc);
+	if (s->cookie_tx < 0) {
+		dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
+		/* switch to PIO */
+		sci_tx_dma_release(s, true);
+		return;
+	}
+
+	dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", __func__,
+		xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
+
+	dma_async_issue_pending(chan);
+}
+#endif
+
 static void sci_start_tx(struct uart_port *port)
 {
 	unsigned short ctrl;
 
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	struct sci_port *s = to_sci_port(port);
+
+	if (s->chan_tx) {
+		if (!uart_circ_empty(&s->port.state->xmit) && s->cookie_tx < 0)
+			schedule_work(&s->work_tx);
+
+		return;
+	}
+#endif
+
 	/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
 	ctrl = sci_in(port, SCSCR);
 	ctrl |= SCI_CTRL_FLAGS_TIE;
@@ -838,13 +1202,12 @@ static void sci_stop_tx(struct uart_port *port)
 	sci_out(port, SCSCR, ctrl);
 }
 
-static void sci_start_rx(struct uart_port *port, unsigned int tty_start)
+static void sci_start_rx(struct uart_port *port)
 {
-	unsigned short ctrl;
+	unsigned short ctrl = SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE;
 
 	/* Set RIE (Receive Interrupt Enable) bit in SCSCR */
-	ctrl = sci_in(port, SCSCR);
-	ctrl |= SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE;
+	ctrl |= sci_in(port, SCSCR);
 	sci_out(port, SCSCR, ctrl);
 }
 
@@ -868,16 +1231,154 @@ static void sci_break_ctl(struct uart_port *port, int break_state)
 	/* Nothing here yet .. */
 }
 
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+static bool filter(struct dma_chan *chan, void *slave)
+{
+	struct sh_dmae_slave *param = slave;
+
+	dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__,
+		param->slave_id);
+
+	if (param->dma_dev == chan->device->dev) {
+		chan->private = param;
+		return true;
+	} else {
+		return false;
+	}
+}
+
+static void rx_timer_fn(unsigned long arg)
+{
+	struct sci_port *s = (struct sci_port *)arg;
+	struct uart_port *port = &s->port;
+
+	u16 scr = sci_in(port, SCSCR);
+	sci_out(port, SCSCR, scr | SCI_CTRL_FLAGS_RIE);
+	dev_dbg(port->dev, "DMA Rx timed out\n");
+	schedule_work(&s->work_rx);
+}
+
+static void sci_request_dma(struct uart_port *port)
+{
+	struct sci_port *s = to_sci_port(port);
+	struct sh_dmae_slave *param;
+	struct dma_chan *chan;
+	dma_cap_mask_t mask;
+	int nent;
+
+	dev_dbg(port->dev, "%s: port %d DMA %p\n", __func__,
+		port->line, s->dma_dev);
+
+	if (!s->dma_dev)
+		return;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	param = &s->param_tx;
+
+	/* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */
+	param->slave_id = s->slave_tx;
+	param->dma_dev = s->dma_dev;
+
+	s->cookie_tx = -EINVAL;
+	chan = dma_request_channel(mask, filter, param);
+	dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
+	if (chan) {
+		s->chan_tx = chan;
+		sg_init_table(&s->sg_tx, 1);
+		/* UART circular tx buffer is an aligned page. */
+		BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
+		sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf),
+			    UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK);
+		nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE);
+		if (!nent)
+			sci_tx_dma_release(s, false);
+		else
+			dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
+				sg_dma_len(&s->sg_tx),
+				port->state->xmit.buf, sg_dma_address(&s->sg_tx));
+
+		s->sg_len_tx = nent;
+
+		INIT_WORK(&s->work_tx, work_fn_tx);
+	}
+
+	param = &s->param_rx;
+
+	/* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */
+	param->slave_id = s->slave_rx;
+	param->dma_dev = s->dma_dev;
+
+	chan = dma_request_channel(mask, filter, param);
+	dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan);
+	if (chan) {
+		dma_addr_t dma[2];
+		void *buf[2];
+		int i;
+
+		s->chan_rx = chan;
+
+		s->buf_len_rx = 2 * max(16, (int)port->fifosize);
+		buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2,
+					    &dma[0], GFP_KERNEL);
+
+		if (!buf[0]) {
+			dev_warn(port->dev,
+				 "failed to allocate dma buffer, using PIO\n");
+			sci_rx_dma_release(s, true);
+			return;
+		}
+
+		buf[1] = buf[0] + s->buf_len_rx;
+		dma[1] = dma[0] + s->buf_len_rx;
+
+		for (i = 0; i < 2; i++) {
+			struct scatterlist *sg = &s->sg_rx[i];
+
+			sg_init_table(sg, 1);
+			sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx,
+				    (int)buf[i] & ~PAGE_MASK);
+			sg->dma_address = dma[i];
+			sg->dma_length = sg->length;
+		}
+
+		INIT_WORK(&s->work_rx, work_fn_rx);
+		setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s);
+
+		sci_submit_rx(s);
+	}
+}
+
+static void sci_free_dma(struct uart_port *port)
+{
+	struct sci_port *s = to_sci_port(port);
+
+	if (!s->dma_dev)
+		return;
+
+	if (s->chan_tx)
+		sci_tx_dma_release(s, false);
+	if (s->chan_rx)
+		sci_rx_dma_release(s, false);
+}
+#endif
+
 static int sci_startup(struct uart_port *port)
 {
 	struct sci_port *s = to_sci_port(port);
 
+	dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+
 	if (s->enable)
 		s->enable(port);
 
 	sci_request_irq(s);
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	sci_request_dma(port);
+#endif
 	sci_start_tx(port);
-	sci_start_rx(port, 1);
+	sci_start_rx(port);
 
 	return 0;
 }
@@ -886,8 +1387,13 @@ static void sci_shutdown(struct uart_port *port)
 {
 	struct sci_port *s = to_sci_port(port);
 
+	dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+
 	sci_stop_rx(port);
 	sci_stop_tx(port);
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	sci_free_dma(port);
+#endif
 	sci_free_irq(s);
 
 	if (s->disable)
@@ -937,6 +1443,9 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	sci_out(port, SCSMR, smr_val);
 
+	dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t,
+		SCSCR_INIT(port));
+
 	if (t > 0) {
 		if (t >= 256) {
 			sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1);
@@ -954,7 +1463,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	sci_out(port, SCSCR, SCSCR_INIT(port));
 
 	if ((termios->c_cflag & CREAD) != 0)
-		sci_start_rx(port, 0);
+		sci_start_rx(port);
 }
 
 static const char *sci_type(struct uart_port *port)
@@ -1049,19 +1558,21 @@ static void __devinit sci_init_single(struct platform_device *dev,
 				      unsigned int index,
 				      struct plat_sci_port *p)
 {
-	sci_port->port.ops	= &sci_uart_ops;
-	sci_port->port.iotype	= UPIO_MEM;
-	sci_port->port.line	= index;
+	struct uart_port *port = &sci_port->port;
+
+	port->ops	= &sci_uart_ops;
+	port->iotype	= UPIO_MEM;
+	port->line	= index;
 
 	switch (p->type) {
 	case PORT_SCIFA:
-		sci_port->port.fifosize = 64;
+		port->fifosize = 64;
 		break;
 	case PORT_SCIF:
-		sci_port->port.fifosize = 16;
+		port->fifosize = 16;
 		break;
 	default:
-		sci_port->port.fifosize = 1;
+		port->fifosize = 1;
 		break;
 	}
 
@@ -1070,19 +1581,28 @@ static void __devinit sci_init_single(struct platform_device *dev,
 		sci_port->dclk = clk_get(&dev->dev, "peripheral_clk");
 		sci_port->enable = sci_clk_enable;
 		sci_port->disable = sci_clk_disable;
-		sci_port->port.dev = &dev->dev;
+		port->dev = &dev->dev;
 	}
 
 	sci_port->break_timer.data = (unsigned long)sci_port;
 	sci_port->break_timer.function = sci_break_timer;
 	init_timer(&sci_port->break_timer);
 
-	sci_port->port.mapbase	= p->mapbase;
-	sci_port->port.membase	= p->membase;
+	port->mapbase	= p->mapbase;
+	port->membase	= p->membase;
 
-	sci_port->port.irq	= p->irqs[SCIx_TXI_IRQ];
-	sci_port->port.flags	= p->flags;
-	sci_port->type		= sci_port->port.type = p->type;
+	port->irq	= p->irqs[SCIx_TXI_IRQ];
+	port->flags	= p->flags;
+	sci_port->type	= port->type = p->type;
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+	sci_port->dma_dev	= p->dma_dev;
+	sci_port->slave_tx	= p->dma_slave_tx;
+	sci_port->slave_rx	= p->dma_slave_rx;
+
+	dev_dbg(port->dev, "%s: DMA device %p, tx %d, rx %d\n", __func__,
+		p->dma_dev, p->dma_slave_tx, p->dma_slave_rx);
+#endif
 
 	memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
 }
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index f7d2589926d2..f70c49f915fa 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -30,7 +30,10 @@
  */
 # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7721)
+      defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SH7367) || \
+      defined(CONFIG_ARCH_SH7377) || \
+      defined(CONFIG_ARCH_SH7372)
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define PORT_PTCR	   0xA405011EUL
 # define PORT_PVCR	   0xA4050122UL
@@ -93,7 +96,9 @@
 # define SCSCR_INIT(port)       0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7724)
 # define SCIF_ORER              0x0001  /* overrun error bit */
-# define SCSCR_INIT(port)       0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCSCR_INIT(port) ((port)->type == PORT_SCIFA ? \
+	0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \
+	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ )
 #elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
 # define SCSPTR2 0xffe80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
@@ -196,6 +201,8 @@
     defined(CONFIG_CPU_SUBTYPE_SH7786)  || \
     defined(CONFIG_CPU_SUBTYPE_SHX3)
 #define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define SCI_CTRL_FLAGS_REIE ((port)->type == PORT_SCIFA ? 0 : 8)
 #else
 #define SCI_CTRL_FLAGS_REIE 0
 #endif
@@ -228,7 +235,10 @@
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
+    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SH7367) || \
+    defined(CONFIG_ARCH_SH7377) || \
+    defined(CONFIG_ARCH_SH7372)
 # define SCIF_ORER    0x0200
 # define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
 # define SCIF_RFDC_MASK 0x007f
@@ -261,7 +271,10 @@
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
+    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SH7367) || \
+    defined(CONFIG_ARCH_SH7377) || \
+    defined(CONFIG_ARCH_SH7372)
 # define SCxSR_RDxF_CLEAR(port)	 (sci_in(port, SCxSR) & 0xfffc)
 # define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
 # define SCxSR_TDxE_CLEAR(port)	 (sci_in(port, SCxSR) & 0xffdf)
@@ -356,7 +369,10 @@
     SCI_OUT(sci_size, sci_offset, value);				\
   }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || \
+    defined(CONFIG_ARCH_SH7367) || \
+    defined(CONFIG_ARCH_SH7377) || \
+    defined(CONFIG_ARCH_SH7372)
 #if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 #define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
 		                sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
@@ -366,7 +382,10 @@
 	  CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7721)
+      defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SH7367) || \
+      defined(CONFIG_ARCH_SH7377) || \
+      defined(CONFIG_ARCH_SH7372)
 #define SCIF_FNS(name, scif_offset, scif_size) \
   CPU_SCIF_FNS(name, scif_offset, scif_size)
 #else
@@ -401,7 +420,10 @@
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
+    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SH7367) || \
+    defined(CONFIG_ARCH_SH7377) || \
+    defined(CONFIG_ARCH_SH7372)
 
 SCIF_FNS(SCSMR,  0x00, 16)
 SCIF_FNS(SCBRR,  0x04,  8)
@@ -413,7 +435,7 @@ SCIF_FNS(SCFCR,  0x18, 16)
 SCIF_FNS(SCFDR,  0x1c, 16)
 SCIF_FNS(SCxTDR, 0x20,  8)
 SCIF_FNS(SCxRDR, 0x24,  8)
-SCIF_FNS(SCLSR,  0x24, 16)
+SCIF_FNS(SCLSR,  0x00,  0)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
       defined(CONFIG_CPU_SUBTYPE_SH7724)
 SCIx_FNS(SCSMR,  0x00, 16, 0x00, 16)
@@ -583,7 +605,10 @@ static inline int sci_rxd_in(struct uart_port *port)
 #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7721)
+      defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SH7367) || \
+      defined(CONFIG_ARCH_SH7377) || \
+      defined(CONFIG_ARCH_SH7372)
 #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
       defined(CONFIG_CPU_SUBTYPE_SH7724)
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index d514e28d0755..d2e0321049e2 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -474,7 +474,7 @@ static void sunsab_stop_rx(struct uart_port *port)
 {
 	struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
 
-	up->interrupt_mask0 |= SAB82532_ISR0_TCD;
+	up->interrupt_mask0 |= SAB82532_IMR0_TCD;
 	writeb(up->interrupt_mask1, &up->regs->w.imr0);
 }
 
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 170d3d68c8f0..01f7731e59b8 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -29,6 +29,7 @@
 #include <linux/serial.h>
 #include <linux/sysrq.h>
 #include <linux/console.h>
+#include <linux/slab.h>
 #ifdef CONFIG_SERIO
 #include <linux/serio.h>
 #endif
@@ -1453,8 +1454,10 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
 	if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
 		err = sunsu_kbd_ms_init(up);
 		if (err) {
+			of_iounmap(&op->resource[0],
+				   up->port.membase, up->reg_size);
 			kfree(up);
-			goto out_unmap;
+			return err;
 		}
 		dev_set_drvdata(&op->dev, up);
 
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
index 7bf10264a6ac..786ba85c170b 100644
--- a/drivers/serial/timbuart.c
+++ b/drivers/serial/timbuart.c
@@ -26,6 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/ioport.h>
+#include <linux/slab.h>
 
 #include "timbuart.h"
 
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index ab2ab3c81834..f0a6c61b17f7 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -19,7 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <asm/io.h>
-#if defined(CONFIG_OF)
+#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
@@ -581,7 +581,7 @@ static struct platform_driver ulite_platform_driver = {
 /* ---------------------------------------------------------------------
  * OF bus bindings
  */
-#if defined(CONFIG_OF)
+#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))
 static int __devinit
 ulite_of_probe(struct of_device *op, const struct of_device_id *match)
 {
@@ -631,11 +631,11 @@ static inline void __exit ulite_of_unregister(void)
 {
 	of_unregister_platform_driver(&ulite_of_driver);
 }
-#else /* CONFIG_OF */
-/* CONFIG_OF not enabled; do nothing helpers */
+#else /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */
+/* Appropriate config not enabled; do nothing helpers */
 static inline int __init ulite_of_register(void) { return 0; }
 static inline void __exit ulite_of_unregister(void) { }
-#endif /* CONFIG_OF */
+#endif /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */
 
 /* ---------------------------------------------------------------------
  * Module setup/teardown
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 465f2fae1025..074904912f64 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -20,6 +20,7 @@
 
 #include <linux/module.h>
 #include <linux/serial.h>
+#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
 #include <linux/of_platform.h>