Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] Ensure 8250_pci quirks are not marked __devinit
  [SERIAL] Convert fifosize to an unsigned int

3 files changed, 15 insertions, 14 deletions

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 864ef859be56..a1d322f8a16c 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -134,7 +134,7 @@ afavlab_setup(struct serial_private *priv, struct pciserial_board *board,
  * and Keystone have one Diva chip with 3 UARTs.  Some later machines have
  * one Diva chip, but it has been expanded to 5 UARTs.
  */
-static int __devinit pci_hp_diva_init(struct pci_dev *dev)
+static int pci_hp_diva_init(struct pci_dev *dev)
 {
 	int rc = 0;
 
@@ -194,7 +194,7 @@ pci_hp_diva_setup(struct serial_private *priv, struct pciserial_board *board,
 /*
  * Added for EKF Intel i960 serial boards
  */
-static int __devinit pci_inteli960ni_init(struct pci_dev *dev)
+static int pci_inteli960ni_init(struct pci_dev *dev)
 {
 	unsigned long oldval;
 
@@ -216,7 +216,7 @@ static int __devinit pci_inteli960ni_init(struct pci_dev *dev)
  * seems to be mainly needed on card using the PLX which also use I/O
  * mapped memory.
  */
-static int __devinit pci_plx9050_init(struct pci_dev *dev)
+static int pci_plx9050_init(struct pci_dev *dev)
 {
 	u8 irq_config;
 	void __iomem *p;
@@ -314,7 +314,7 @@ sbs_setup(struct serial_private *priv, struct pciserial_board *board,
 /* global control register offset for SBS PMC-OctalPro */
 #define OCT_REG_CR_OFF		0x500
 
-static int __devinit sbs_init(struct pci_dev *dev)
+static int sbs_init(struct pci_dev *dev)
 {
 	u8 __iomem *p;
 
@@ -493,7 +493,7 @@ static const struct timedia_struct {
 	{ 0, NULL }
 };
 
-static int __devinit pci_timedia_init(struct pci_dev *dev)
+static int pci_timedia_init(struct pci_dev *dev)
 {
 	unsigned short *ids;
 	int i, j;
@@ -566,13 +566,13 @@ titan_400l_800l_setup(struct serial_private *priv,
 	return setup_port(priv, port, bar, offset, board->reg_shift);
 }
 
-static int __devinit pci_xircom_init(struct pci_dev *dev)
+static int pci_xircom_init(struct pci_dev *dev)
 {
 	msleep(100);
 	return 0;
 }
 
-static int __devinit pci_netmos_init(struct pci_dev *dev)
+static int pci_netmos_init(struct pci_dev *dev)
 {
 	/* subdevice 0x00PS means <P> parallel, <S> serial */
 	unsigned int num_serial = dev->subsystem_device & 0xf;
@@ -622,7 +622,7 @@ pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
  */
 static struct pci_serial_quirk pci_serial_quirks[] = {
 	/*
-	 * AFAVLAB cards.
+	 * AFAVLAB cards - these may be called via parport_serial
 	 *  It is not clear whether this applies to all products.
 	 */
 	{
@@ -754,7 +754,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
 		.exit		= __devexit_p(sbs_exit),
 	},
 	/*
-	 * SIIG cards.
+	 * SIIG cards - these may be called via parport_serial
 	 */
 	{
 		.vendor		= PCI_VENDOR_ID_SIIG,
@@ -811,7 +811,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
 		.setup		= pci_default_setup,
 	},
 	/*
-	 * Netmos cards
+	 * Netmos cards - these may be called via parport_serial
 	 */
 	{
 		.vendor		= PCI_VENDOR_ID_NETMOS,
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 48eb22d3a63e..7708e5dd3656 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -726,8 +726,7 @@ mpc52xx_uart_probe(struct platform_device *dev)
 
 	spin_lock_init(&port->lock);
 	port->uartclk	= __res.bi_ipbfreq / 2; /* Look at CTLR doc */
-	port->fifosize	= 255; /* Should be 512 ! But it can't be */
-	                       /* stored in a unsigned char       */
+	port->fifosize	= 512;
 	port->iotype	= UPIO_MEM;
 	port->flags	= UPF_BOOT_AUTOCONF |
 			  ( uart_console(port) ? 0 : UPF_IOREMAP );
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 95831808334c..d5f636fbf29a 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -696,7 +696,8 @@ static int uart_set_info(struct uart_state *state,
 		    (new_serial.baud_base != port->uartclk / 16) ||
 		    (close_delay != state->close_delay) ||
 		    (closing_wait != state->closing_wait) ||
-		    (new_serial.xmit_fifo_size != port->fifosize) ||
+		    (new_serial.xmit_fifo_size &&
+		     new_serial.xmit_fifo_size != port->fifosize) ||
 		    (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0))
 			goto exit;
 		port->flags = ((port->flags & ~UPF_USR_MASK) |
@@ -801,7 +802,8 @@ static int uart_set_info(struct uart_state *state,
 	port->custom_divisor   = new_serial.custom_divisor;
 	state->close_delay     = close_delay;
 	state->closing_wait    = closing_wait;
-	port->fifosize         = new_serial.xmit_fifo_size;
+	if (new_serial.xmit_fifo_size)
+		port->fifosize = new_serial.xmit_fifo_size;
 	if (state->info->tty)
 		state->info->tty->low_latency =
 			(port->flags & UPF_LOW_LATENCY) ? 1 : 0;