diff options
| author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-17 02:20:36 +0400 |
|---|---|---|
| committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-17 02:20:36 +0400 |
| commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
| tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/serial/ioc4_serial.c | |
| download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz | |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/serial/ioc4_serial.c')
| -rw-r--r-- | drivers/serial/ioc4_serial.c | 2909 |
1 files changed, 2909 insertions, 0 deletions
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c new file mode 100644 index 000000000000..d054f1265701 --- /dev/null +++ b/drivers/serial/ioc4_serial.c @@ -0,0 +1,2909 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003-2005 Silicon Graphics, Inc. All Rights Reserved. + */ + + +/* + * This file contains a module version of the ioc4 serial driver. This + * includes all the support functions needed (support functions, etc.) + * and the serial driver itself. + */ +#include <linux/errno.h> +#include <linux/tty.h> +#include <linux/serial.h> +#include <linux/serialP.h> +#include <linux/circ_buf.h> +#include <linux/serial_reg.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/ioc4_common.h> +#include <linux/serial_core.h> + +/* + * interesting things about the ioc4 + */ + +#define IOC4_NUM_SERIAL_PORTS 4 /* max ports per card */ +#define IOC4_NUM_CARDS 8 /* max cards per partition */ + +#define GET_SIO_IR(_n) (_n == 0) ? (IOC4_SIO_IR_S0) : \ + (_n == 1) ? (IOC4_SIO_IR_S1) : \ + (_n == 2) ? (IOC4_SIO_IR_S2) : \ + (IOC4_SIO_IR_S3) + +#define GET_OTHER_IR(_n) (_n == 0) ? (IOC4_OTHER_IR_S0_MEMERR) : \ + (_n == 1) ? (IOC4_OTHER_IR_S1_MEMERR) : \ + (_n == 2) ? (IOC4_OTHER_IR_S2_MEMERR) : \ + (IOC4_OTHER_IR_S3_MEMERR) + + +/* + * All IOC4 registers are 32 bits wide. + */ + +/* + * PCI Memory Space Map + */ +#define IOC4_PCI_ERR_ADDR_L 0x000 /* Low Error Address */ +#define IOC4_PCI_ERR_ADDR_VLD (0x1 << 0) +#define IOC4_PCI_ERR_ADDR_MST_ID_MSK (0xf << 1) +#define IOC4_PCI_ERR_ADDR_MST_NUM_MSK (0xe << 1) +#define IOC4_PCI_ERR_ADDR_MST_TYP_MSK (0x1 << 1) +#define IOC4_PCI_ERR_ADDR_MUL_ERR (0x1 << 5) +#define IOC4_PCI_ERR_ADDR_ADDR_MSK (0x3ffffff << 6) + +/* Interrupt types */ +#define IOC4_SIO_INTR_TYPE 0 +#define IOC4_OTHER_INTR_TYPE 1 +#define IOC4_NUM_INTR_TYPES 2 + +/* Bitmasks for IOC4_SIO_IR, IOC4_SIO_IEC, and IOC4_SIO_IES */ +#define IOC4_SIO_IR_S0_TX_MT 0x00000001 /* Serial port 0 TX empty */ +#define IOC4_SIO_IR_S0_RX_FULL 0x00000002 /* Port 0 RX buf full */ +#define IOC4_SIO_IR_S0_RX_HIGH 0x00000004 /* Port 0 RX hiwat */ +#define IOC4_SIO_IR_S0_RX_TIMER 0x00000008 /* Port 0 RX timeout */ +#define IOC4_SIO_IR_S0_DELTA_DCD 0x00000010 /* Port 0 delta DCD */ +#define IOC4_SIO_IR_S0_DELTA_CTS 0x00000020 /* Port 0 delta CTS */ +#define IOC4_SIO_IR_S0_INT 0x00000040 /* Port 0 pass-thru intr */ +#define IOC4_SIO_IR_S0_TX_EXPLICIT 0x00000080 /* Port 0 explicit TX thru */ +#define IOC4_SIO_IR_S1_TX_MT 0x00000100 /* Serial port 1 */ +#define IOC4_SIO_IR_S1_RX_FULL 0x00000200 /* */ +#define IOC4_SIO_IR_S1_RX_HIGH 0x00000400 /* */ +#define IOC4_SIO_IR_S1_RX_TIMER 0x00000800 /* */ +#define IOC4_SIO_IR_S1_DELTA_DCD 0x00001000 /* */ +#define IOC4_SIO_IR_S1_DELTA_CTS 0x00002000 /* */ +#define IOC4_SIO_IR_S1_INT 0x00004000 /* */ +#define IOC4_SIO_IR_S1_TX_EXPLICIT 0x00008000 /* */ +#define IOC4_SIO_IR_S2_TX_MT 0x00010000 /* Serial port 2 */ +#define IOC4_SIO_IR_S2_RX_FULL 0x00020000 /* */ +#define IOC4_SIO_IR_S2_RX_HIGH 0x00040000 /* */ +#define IOC4_SIO_IR_S2_RX_TIMER 0x00080000 /* */ +#define IOC4_SIO_IR_S2_DELTA_DCD 0x00100000 /* */ +#define IOC4_SIO_IR_S2_DELTA_CTS 0x00200000 /* */ +#define IOC4_SIO_IR_S2_INT 0x00400000 /* */ +#define IOC4_SIO_IR_S2_TX_EXPLICIT 0x00800000 /* */ +#define IOC4_SIO_IR_S3_TX_MT 0x01000000 /* Serial port 3 */ +#define IOC4_SIO_IR_S3_RX_FULL 0x02000000 /* */ +#define IOC4_SIO_IR_S3_RX_HIGH 0x04000000 /* */ +#define IOC4_SIO_IR_S3_RX_TIMER 0x08000000 /* */ +#define IOC4_SIO_IR_S3_DELTA_DCD 0x10000000 /* */ +#define IOC4_SIO_IR_S3_DELTA_CTS 0x20000000 /* */ +#define IOC4_SIO_IR_S3_INT 0x40000000 /* */ +#define IOC4_SIO_IR_S3_TX_EXPLICIT 0x80000000 /* */ + +/* Per device interrupt masks */ +#define IOC4_SIO_IR_S0 (IOC4_SIO_IR_S0_TX_MT | \ + IOC4_SIO_IR_S0_RX_FULL | \ + IOC4_SIO_IR_S0_RX_HIGH | \ + IOC4_SIO_IR_S0_RX_TIMER | \ + IOC4_SIO_IR_S0_DELTA_DCD | \ + IOC4_SIO_IR_S0_DELTA_CTS | \ + IOC4_SIO_IR_S0_INT | \ + IOC4_SIO_IR_S0_TX_EXPLICIT) +#define IOC4_SIO_IR_S1 (IOC4_SIO_IR_S1_TX_MT | \ + IOC4_SIO_IR_S1_RX_FULL | \ + IOC4_SIO_IR_S1_RX_HIGH | \ + IOC4_SIO_IR_S1_RX_TIMER | \ + IOC4_SIO_IR_S1_DELTA_DCD | \ + IOC4_SIO_IR_S1_DELTA_CTS | \ + IOC4_SIO_IR_S1_INT | \ + IOC4_SIO_IR_S1_TX_EXPLICIT) +#define IOC4_SIO_IR_S2 (IOC4_SIO_IR_S2_TX_MT | \ + IOC4_SIO_IR_S2_RX_FULL | \ + IOC4_SIO_IR_S2_RX_HIGH | \ + IOC4_SIO_IR_S2_RX_TIMER | \ + IOC4_SIO_IR_S2_DELTA_DCD | \ + IOC4_SIO_IR_S2_DELTA_CTS | \ + IOC4_SIO_IR_S2_INT | \ + IOC4_SIO_IR_S2_TX_EXPLICIT) +#define IOC4_SIO_IR_S3 (IOC4_SIO_IR_S3_TX_MT | \ + IOC4_SIO_IR_S3_RX_FULL | \ + IOC4_SIO_IR_S3_RX_HIGH | \ + IOC4_SIO_IR_S3_RX_TIMER | \ + IOC4_SIO_IR_S3_DELTA_DCD | \ + IOC4_SIO_IR_S3_DELTA_CTS | \ + IOC4_SIO_IR_S3_INT | \ + IOC4_SIO_IR_S3_TX_EXPLICIT) + +/* Bitmasks for IOC4_OTHER_IR, IOC4_OTHER_IEC, and IOC4_OTHER_IES */ +#define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */ +#define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */ +#define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */ +#define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */ +#define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */ +#define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */ + +/* Bitmasks for IOC4_SIO_CR */ +#define IOC4_SIO_CR_CMD_PULSE_SHIFT 0 /* byte bus strobe shift */ +#define IOC4_SIO_CR_ARB_DIAG_TX0 0x00000000 +#define IOC4_SIO_CR_ARB_DIAG_RX0 0x00000010 +#define IOC4_SIO_CR_ARB_DIAG_TX1 0x00000020 +#define IOC4_SIO_CR_ARB_DIAG_RX1 0x00000030 +#define IOC4_SIO_CR_ARB_DIAG_TX2 0x00000040 +#define IOC4_SIO_CR_ARB_DIAG_RX2 0x00000050 +#define IOC4_SIO_CR_ARB_DIAG_TX3 0x00000060 +#define IOC4_SIO_CR_ARB_DIAG_RX3 0x00000070 +#define IOC4_SIO_CR_SIO_DIAG_IDLE 0x00000080 /* 0 -> active request among + serial ports (ro) */ +/* Defs for some of the generic I/O pins */ +#define IOC4_GPCR_UART0_MODESEL 0x10 /* Pin is output to port 0 + mode sel */ +#define IOC4_GPCR_UART1_MODESEL 0x20 /* Pin is output to port 1 + mode sel */ +#define IOC4_GPCR_UART2_MODESEL 0x40 /* Pin is output to port 2 + mode sel */ +#define IOC4_GPCR_UART3_MODESEL 0x80 /* Pin is output to port 3 + mode sel */ + +#define IOC4_GPPR_UART0_MODESEL_PIN 4 /* GIO pin controlling + uart 0 mode select */ +#define IOC4_GPPR_UART1_MODESEL_PIN 5 /* GIO pin controlling + uart 1 mode select */ +#define IOC4_GPPR_UART2_MODESEL_PIN 6 /* GIO pin controlling + uart 2 mode select */ +#define IOC4_GPPR_UART3_MODESEL_PIN 7 /* GIO pin controlling + uart 3 mode select */ + +/* Bitmasks for serial RX status byte */ +#define IOC4_RXSB_OVERRUN 0x01 /* Char(s) lost */ +#define IOC4_RXSB_PAR_ERR 0x02 /* Parity error */ +#define IOC4_RXSB_FRAME_ERR 0x04 /* Framing error */ +#define IOC4_RXSB_BREAK 0x08 /* Break character */ +#define IOC4_RXSB_CTS 0x10 /* State of CTS */ +#define IOC4_RXSB_DCD 0x20 /* State of DCD */ +#define IOC4_RXSB_MODEM_VALID 0x40 /* DCD, CTS, and OVERRUN are valid */ +#define IOC4_RXSB_DATA_VALID 0x80 /* Data byte, FRAME_ERR PAR_ERR + * & BREAK valid */ + +/* Bitmasks for serial TX control byte */ +#define IOC4_TXCB_INT_WHEN_DONE 0x20 /* Interrupt after this byte is sent */ +#define IOC4_TXCB_INVALID 0x00 /* Byte is invalid */ +#define IOC4_TXCB_VALID 0x40 /* Byte is valid */ +#define IOC4_TXCB_MCR 0x80 /* Data<7:0> to modem control reg */ +#define IOC4_TXCB_DELAY 0xc0 /* Delay data<7:0> mSec */ + +/* Bitmasks for IOC4_SBBR_L */ +#define IOC4_SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */ + +/* Bitmasks for IOC4_SSCR_<3:0> */ +#define IOC4_SSCR_RX_THRESHOLD 0x000001ff /* Hiwater mark */ +#define IOC4_SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */ +#define IOC4_SSCR_HFC_EN 0x00020000 /* Hardware flow control enabled */ +#define IOC4_SSCR_RX_RING_DCD 0x00040000 /* Post RX record on delta-DCD */ +#define IOC4_SSCR_RX_RING_CTS 0x00080000 /* Post RX record on delta-CTS */ +#define IOC4_SSCR_DIAG 0x00200000 /* Bypass clock divider for sim */ +#define IOC4_SSCR_RX_DRAIN 0x08000000 /* Drain RX buffer to memory */ +#define IOC4_SSCR_DMA_EN 0x10000000 /* Enable ring buffer DMA */ +#define IOC4_SSCR_DMA_PAUSE 0x20000000 /* Pause DMA */ +#define IOC4_SSCR_PAUSE_STATE 0x40000000 /* Sets when PAUSE takes effect */ +#define IOC4_SSCR_RESET 0x80000000 /* Reset DMA channels */ + +/* All producer/comsumer pointers are the same bitfield */ +#define IOC4_PROD_CONS_PTR_4K 0x00000ff8 /* For 4K buffers */ +#define IOC4_PROD_CONS_PTR_1K 0x000003f8 /* For 1K buffers */ +#define IOC4_PROD_CONS_PTR_OFF 3 + +/* Bitmasks for IOC4_SRCIR_<3:0> */ +#define IOC4_SRCIR_ARM 0x80000000 /* Arm RX timer */ + +/* Bitmasks for IOC4_SHADOW_<3:0> */ +#define IOC4_SHADOW_DR 0x00000001 /* Data ready */ +#define IOC4_SHADOW_OE 0x00000002 /* Overrun error */ +#define IOC4_SHADOW_PE 0x00000004 /* Parity error */ +#define IOC4_SHADOW_FE 0x00000008 /* Framing error */ +#define IOC4_SHADOW_BI 0x00000010 /* Break interrupt */ +#define IOC4_SHADOW_THRE 0x00000020 /* Xmit holding register empty */ +#define IOC4_SHADOW_TEMT 0x00000040 /* Xmit shift register empty */ +#define IOC4_SHADOW_RFCE 0x00000080 /* Char in RX fifo has an error */ +#define IOC4_SHADOW_DCTS 0x00010000 /* Delta clear to send */ +#define IOC4_SHADOW_DDCD 0x00080000 /* Delta data carrier detect */ +#define IOC4_SHADOW_CTS 0x00100000 /* Clear to send */ +#define IOC4_SHADOW_DCD 0x00800000 /* Data carrier detect */ +#define IOC4_SHADOW_DTR 0x01000000 /* Data terminal ready */ +#define IOC4_SHADOW_RTS 0x02000000 /* Request to send */ +#define IOC4_SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */ +#define IOC4_SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */ +#define IOC4_SHADOW_LOOP 0x10000000 /* Loopback enabled */ + +/* Bitmasks for IOC4_SRTR_<3:0> */ +#define IOC4_SRTR_CNT 0x00000fff /* Reload value for RX timer */ +#define IOC4_SRTR_CNT_VAL 0x0fff0000 /* Current value of RX timer */ +#define IOC4_SRTR_CNT_VAL_SHIFT 16 +#define IOC4_SRTR_HZ 16000 /* SRTR clock frequency */ + +/* Serial port register map used for DMA and PIO serial I/O */ +struct ioc4_serialregs { + uint32_t sscr; + uint32_t stpir; + uint32_t stcir; + uint32_t srpir; + uint32_t srcir; + uint32_t srtr; + uint32_t shadow; +}; + +/* IOC4 UART register map */ +struct ioc4_uartregs { + char i4u_lcr; + union { + char iir; /* read only */ + char fcr; /* write only */ + } u3; + union { + char ier; /* DLAB == 0 */ + char dlm; /* DLAB == 1 */ + } u2; + union { + char rbr; /* read only, DLAB == 0 */ + char thr; /* write only, DLAB == 0 */ + char dll; /* DLAB == 1 */ + } u1; + char i4u_scr; + char i4u_msr; + char i4u_lsr; + char i4u_mcr; +}; + +/* short names */ +#define i4u_dll u1.dll +#define i4u_ier u2.ier +#define i4u_dlm u2.dlm +#define i4u_fcr u3.fcr + +/* PCI memory space register map addressed using pci_bar0 */ +struct ioc4_memregs { + struct ioc4_mem { + /* Miscellaneous IOC4 registers */ + uint32_t pci_err_addr_l; + uint32_t pci_err_addr_h; + uint32_t sio_ir; + uint32_t other_ir; + + /* These registers are read-only for general kernel code. */ + uint32_t sio_ies_ro; + uint32_t other_ies_ro; + uint32_t sio_iec_ro; + uint32_t other_iec_ro; + uint32_t sio_cr; + uint32_t misc_fill1; + uint32_t int_out; + uint32_t misc_fill2; + uint32_t gpcr_s; + uint32_t gpcr_c; + uint32_t gpdr; + uint32_t misc_fill3; + uint32_t gppr_0; + uint32_t gppr_1; + uint32_t gppr_2; + uint32_t gppr_3; + uint32_t gppr_4; + uint32_t gppr_5; + uint32_t gppr_6; + uint32_t gppr_7; + } ioc4_mem; + + char misc_fill4[0x100 - 0x5C - 4]; + + /* ATA/ATAP registers */ + uint32_t ata_notused[9]; + char ata_fill1[0x140 - 0x120 - 4]; + uint32_t ata_notused1[8]; + char ata_fill2[0x200 - 0x15C - 4]; + + /* Keyboard and mouse registers */ + uint32_t km_notused[5];; + char km_fill1[0x300 - 0x210 - 4]; + + /* Serial port registers used for DMA serial I/O */ + struct ioc4_serial { + uint32_t sbbr01_l; + uint32_t sbbr01_h; + uint32_t sbbr23_l; + uint32_t sbbr23_h; + + struct ioc4_serialregs port_0; + struct ioc4_serialregs port_1; + struct ioc4_serialregs port_2; + struct ioc4_serialregs port_3; + struct ioc4_uartregs uart_0; + struct ioc4_uartregs uart_1; + struct ioc4_uartregs uart_2; + struct ioc4_uartregs uart_3; + } ioc4_serial; +}; + +/* UART clock speed */ +#define IOC4_SER_XIN_CLK IOC4_SER_XIN_CLK_66 +#define IOC4_SER_XIN_CLK_66 66666667 +#define IOC4_SER_XIN_CLK_33 33333333 + +#define IOC4_W_IES 0 +#define IOC4_W_IEC 1 + +typedef void ioc4_intr_func_f(void *, uint32_t); +typedef ioc4_intr_func_f *ioc4_intr_func_t; + +/* defining this will get you LOTS of great debug info */ +//#define DEBUG_INTERRUPTS +#define DPRINT_CONFIG(_x...) ; +//#define DPRINT_CONFIG(_x...) printk _x + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +/* number of characters we want to transmit to the lower level at a time */ +#define IOC4_MAX_CHARS 128 + +/* Device name we're using */ +#define DEVICE_NAME "ttyIOC" +#define DEVICE_MAJOR 204 +#define DEVICE_MINOR 50 + +/* register offsets */ +#define IOC4_SERIAL_OFFSET 0x300 + +/* flags for next_char_state */ +#define NCS_BREAK 0x1 +#define NCS_PARITY 0x2 +#define NCS_FRAMING 0x4 +#define NCS_OVERRUN 0x8 + +/* cause we need SOME parameters ... */ +#define MIN_BAUD_SUPPORTED 1200 +#define MAX_BAUD_SUPPORTED 115200 + +/* protocol types supported */ +enum sio_proto { + PROTO_RS232, + PROTO_RS422 +}; + +/* Notification types */ +#define N_DATA_READY 0x01 +#define N_OUTPUT_LOWAT 0x02 +#define N_BREAK 0x04 +#define N_PARITY_ERROR 0x08 +#define N_FRAMING_ERROR 0x10 +#define N_OVERRUN_ERROR 0x20 +#define N_DDCD 0x40 +#define N_DCTS 0x80 + +#define N_ALL_INPUT (N_DATA_READY | N_BREAK | \ + N_PARITY_ERROR | N_FRAMING_ERROR | \ + N_OVERRUN_ERROR | N_DDCD | N_DCTS) + +#define N_ALL_OUTPUT N_OUTPUT_LOWAT + +#define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR | N_OVERRUN_ERROR) + +#define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK | \ + N_PARITY_ERROR | N_FRAMING_ERROR | \ + N_OVERRUN_ERROR | N_DDCD | N_DCTS) + +#define SER_DIVISOR(_x, clk) (((clk) + (_x) * 8) / ((_x) * 16)) +#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div)) + +/* Some masks */ +#define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \ + | UART_LCR_WLEN7 | UART_LCR_WLEN8) +#define LCR_MASK_STOP_BITS (UART_LCR_STOP) + +#define PENDING(_p) (readl(&(_p)->ip_mem->sio_ir) & _p->ip_ienb) +#define READ_SIO_IR(_p) readl(&(_p)->ip_mem->sio_ir) + +/* Default to 4k buffers */ +#ifdef IOC4_1K_BUFFERS +#define RING_BUF_SIZE 1024 +#define IOC4_BUF_SIZE_BIT 0 +#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_1K +#else +#define RING_BUF_SIZE 4096 +#define IOC4_BUF_SIZE_BIT IOC4_SBBR_L_SIZE +#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_4K +#endif + +#define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4) + +/* + * This is the entry saved by the driver - one per card + */ +struct ioc4_control { + int ic_irq; + struct { + /* uart ports are allocated here */ + struct uart_port icp_uart_port; + /* Handy reference material */ + struct ioc4_port *icp_port; + } ic_port[IOC4_NUM_SERIAL_PORTS]; + struct ioc4_soft *ic_soft; +}; + +/* + * per-IOC4 data structure + */ +#define MAX_IOC4_INTR_ENTS (8 * sizeof(uint32_t)) +struct ioc4_soft { + struct ioc4_mem __iomem *is_ioc4_mem_addr; + struct ioc4_serial __iomem *is_ioc4_serial_addr; + + /* Each interrupt type has an entry in the array */ + struct ioc4_intr_type { + + /* + * Each in-use entry in this array contains at least + * one nonzero bit in sd_bits; no two entries in this + * array have overlapping sd_bits values. + */ + struct ioc4_intr_info { + uint32_t sd_bits; + ioc4_intr_func_f *sd_intr; + void *sd_info; + } is_intr_info[MAX_IOC4_INTR_ENTS]; + + /* Number of entries active in the above array */ + atomic_t is_num_intrs; + } is_intr_type[IOC4_NUM_INTR_TYPES]; + + /* is_ir_lock must be held while + * modifying sio_ie values, so + * we can be sure that sio_ie is + * not changing when we read it + * along with sio_ir. + */ + spinlock_t is_ir_lock; /* SIO_IE[SC] mod lock */ +}; + +/* Local port info for each IOC4 serial ports */ +struct ioc4_port { + struct uart_port *ip_port; + /* Back ptrs for this port */ + struct ioc4_control *ip_control; + struct pci_dev *ip_pdev; + struct ioc4_soft *ip_ioc4_soft; + + /* pci mem addresses */ + struct ioc4_mem __iomem *ip_mem; + struct ioc4_serial __iomem *ip_serial; + struct ioc4_serialregs __iomem *ip_serial_regs; + struct ioc4_uartregs __iomem *ip_uart_regs; + + /* Ring buffer page for this port */ + dma_addr_t ip_dma_ringbuf; + /* vaddr of ring buffer */ + struct ring_buffer *ip_cpu_ringbuf; + + /* Rings for this port */ + struct ring *ip_inring; + struct ring *ip_outring; + + /* Hook to port specific values */ + struct hooks *ip_hooks; + + spinlock_t ip_lock; + + /* Various rx/tx parameters */ + int ip_baud; + int ip_tx_lowat; + int ip_rx_timeout; + + /* Copy of notification bits */ + int ip_notify; + + /* Shadow copies of various registers so we don't need to PIO + * read them constantly + */ + uint32_t ip_ienb; /* Enabled interrupts */ + uint32_t ip_sscr; + uint32_t ip_tx_prod; + uint32_t ip_rx_cons; + int ip_pci_bus_speed; + unsigned char ip_flags; +}; + +/* tx low water mark. We need to notify the driver whenever tx is getting + * close to empty so it can refill the tx buffer and keep things going. + * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll + * have no trouble getting in more chars in time (I certainly hope so). + */ +#define TX_LOWAT_LATENCY 1000 +#define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY) +#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ) + +/* Flags per port */ +#define INPUT_HIGH 0x01 +#define DCD_ON 0x02 +#define LOWAT_WRITTEN 0x04 +#define READ_ABORTED 0x08 + +/* Since each port has different register offsets and bitmasks + * for everything, we'll store those that we need in tables so we + * don't have to be constantly checking the port we are dealing with. + */ +struct hooks { + uint32_t intr_delta_dcd; + uint32_t intr_delta_cts; + uint32_t intr_tx_mt; + uint32_t intr_rx_timer; + uint32_t intr_rx_high; + uint32_t intr_tx_explicit; + uint32_t intr_dma_error; + uint32_t intr_clear; + uint32_t intr_all; + char rs422_select_pin; +}; + +static struct hooks hooks_array[IOC4_NUM_SERIAL_PORTS] = { + /* Values for port 0 */ + { + IOC4_SIO_IR_S0_DELTA_DCD, IOC4_SIO_IR_S0_DELTA_CTS, + IOC4_SIO_IR_S0_TX_MT, IOC4_SIO_IR_S0_RX_TIMER, + IOC4_SIO_IR_S0_RX_HIGH, IOC4_SIO_IR_S0_TX_EXPLICIT, + IOC4_OTHER_IR_S0_MEMERR, + (IOC4_SIO_IR_S0_TX_MT | IOC4_SIO_IR_S0_RX_FULL | + IOC4_SIO_IR_S0_RX_HIGH | IOC4_SIO_IR_S0_RX_TIMER | + IOC4_SIO_IR_S0_DELTA_DCD | IOC4_SIO_IR_S0_DELTA_CTS | + IOC4_SIO_IR_S0_INT | IOC4_SIO_IR_S0_TX_EXPLICIT), + IOC4_SIO_IR_S0, IOC4_GPPR_UART0_MODESEL_PIN, + }, + + /* Values for port 1 */ + { + IOC4_SIO_IR_S1_DELTA_DCD, IOC4_SIO_IR_S1_DELTA_CTS, + IOC4_SIO_IR_S1_TX_MT, IOC4_SIO_IR_S1_RX_TIMER, + IOC4_SIO_IR_S1_RX_HIGH, IOC4_SIO_IR_S1_TX_EXPLICIT, + IOC4_OTHER_IR_S1_MEMERR, + (IOC4_SIO_IR_S1_TX_MT | IOC4_SIO_IR_S1_RX_FULL | + IOC4_SIO_IR_S1_RX_HIGH | IOC4_SIO_IR_S1_RX_TIMER | + IOC4_SIO_IR_S1_DELTA_DCD | IOC4_SIO_IR_S1_DELTA_CTS | + IOC4_SIO_IR_S1_INT | IOC4_SIO_IR_S1_TX_EXPLICIT), + IOC4_SIO_IR_S1, IOC4_GPPR_UART1_MODESEL_PIN, + }, + + /* Values for port 2 */ + { + IOC4_SIO_IR_S2_DELTA_DCD, IOC4_SIO_IR_S2_DELTA_CTS, + IOC4_SIO_IR_S2_TX_MT, IOC4_SIO_IR_S2_RX_TIMER, + IOC4_SIO_IR_S2_RX_HIGH, IOC4_SIO_IR_S2_TX_EXPLICIT, + IOC4_OTHER_IR_S2_MEMERR, + (IOC4_SIO_IR_S2_TX_MT | IOC4_SIO_IR_S2_RX_FULL | + IOC4_SIO_IR_S2_RX_HIGH | IOC4_SIO_IR_S2_RX_TIMER | + IOC4_SIO_IR_S2_DELTA_DCD | IOC4_SIO_IR_S2_DELTA_CTS | + IOC4_SIO_IR_S2_INT | IOC4_SIO_IR_S2_TX_EXPLICIT), + IOC4_SIO_IR_S2, IOC4_GPPR_UART2_MODESEL_PIN, + }, + + /* Values for port 3 */ + { + IOC4_SIO_IR_S3_DELTA_DCD, IOC4_SIO_IR_S3_DELTA_CTS, + IOC4_SIO_IR_S3_TX_MT, IOC4_SIO_IR_S3_RX_TIMER, + IOC4_SIO_IR_S3_RX_HIGH, IOC4_SIO_IR_S3_TX_EXPLICIT, + IOC4_OTHER_IR_S3_MEMERR, + (IOC4_SIO_IR_S3_TX_MT | IOC4_SIO_IR_S3_RX_FULL | + IOC4_SIO_IR_S3_RX_HIGH | IOC4_SIO_IR_S3_RX_TIMER | + IOC4_SIO_IR_S3_DELTA_DCD | IOC4_SIO_IR_S3_DELTA_CTS | + IOC4_SIO_IR_S3_INT | IOC4_SIO_IR_S3_TX_EXPLICIT), + IOC4_SIO_IR_S3, IOC4_GPPR_UART3_MODESEL_PIN, + } +}; + +/* A ring buffer entry */ +struct ring_entry { + union { + struct { + uint32_t alldata; + uint32_t allsc; + } all; + struct { + char data[4]; /* data bytes */ + char sc[4]; /* status/control */ + } s; + } u; +}; + +/* Test the valid bits in any of the 4 sc chars using "allsc" member */ +#define RING_ANY_VALID \ + ((uint32_t)(IOC4_RXSB_MODEM_VALID | IOC4_RXSB_DATA_VALID) * 0x01010101) + +#define ring_sc u.s.sc +#define ring_data u.s.data +#define ring_allsc u.all.allsc + +/* Number of entries per ring buffer. */ +#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry)) + +/* An individual ring */ +struct ring { + struct ring_entry entries[ENTRIES_PER_RING]; +}; + +/* The whole enchilada */ +struct ring_buffer { + struct ring TX_0_OR_2; + struct ring RX_0_OR_2; + struct ring TX_1_OR_3; + struct ring RX_1_OR_3; +}; + +/* Get a ring from a port struct */ +#define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh) + +/* Infinite loop detection. + */ +#define MAXITER 10000000 + +/* Prototypes */ +static void receive_chars(struct uart_port *); +static void handle_intr(void *arg, uint32_t sio_ir); + +/** + * write_ireg - write the interrupt regs + * @ioc4_soft: ptr to soft struct for this port + * @val: value to write + * @which: which register + * @type: which ireg set + */ +static inline void +write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type) +{ + struct ioc4_mem __iomem *mem = ioc4_soft->is_ioc4_mem_addr; + unsigned long flags; + + spin_lock_irqsave(&ioc4_soft->is_ir_lock, flags); + + switch (type) { + case IOC4_SIO_INTR_TYPE: + switch (which) { + case IOC4_W_IES: + writel(val, &mem->sio_ies_ro); + break; + + case IOC4_W_IEC: + writel(val, &mem->sio_iec_ro); + break; + } + break; + + case IOC4_OTHER_INTR_TYPE: + switch (which) { + case IOC4_W_IES: + writel(val, &mem->other_ies_ro); + break; + + case IOC4_W_IEC: + writel(val, &mem->other_iec_ro); + break; + } + break; + + default: + break; + } + spin_unlock_irqrestore(&ioc4_soft->is_ir_lock, flags); +} + +/** + * set_baud - Baud rate setting code + * @port: port to set + * @baud: baud rate to use + */ +static int set_baud(struct ioc4_port *port, int baud) +{ + int actual_baud; + int diff; + int lcr; + unsigned short divisor; + struct ioc4_uartregs __iomem *uart; + + divisor = SER_DIVISOR(baud, port->ip_pci_bus_speed); + if (!divisor) + return 1; + actual_baud = DIVISOR_TO_BAUD(divisor, port->ip_pci_bus_speed); + + diff = actual_baud - baud; + if (diff < 0) + diff = -diff; + + /* If we're within 1%, we've found a match */ + if (diff * 100 > actual_baud) + return 1; + + uart = port->ip_uart_regs; + lcr = readb(&uart->i4u_lcr); + writeb(lcr | UART_LCR_DLAB, &uart->i4u_lcr); + writeb((unsigned char)divisor, &uart->i4u_dll); + writeb((unsigned char)(divisor >> 8), &uart->i4u_dlm); + writeb(lcr, &uart->i4u_lcr); + return 0; +} + + +/** + * get_ioc4_port - given a uart port, return the control structure + * @port: uart port + */ +static struct ioc4_port *get_ioc4_port(struct uart_port *the_port) +{ + struct ioc4_control *control = dev_get_drvdata(the_port->dev); + int ii; + + if (control) { + for ( ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++ ) { + if (!control->ic_port[ii].icp_port) + continue; + if (the_port == control->ic_port[ii].icp_port->ip_port) + return control->ic_port[ii].icp_port; + } + } + return NULL; +} + +/* The IOC4 hardware provides no atomic way to determine if interrupts + * are pending since two reads are required to do so. The handler must + * read the SIO_IR and the SIO_IES, and take the logical and of the + * two. When this value is zero, all interrupts have been serviced and + * the handler may return. + * + * This has the unfortunate "hole" that, if some other CPU or + * some other thread or some higher level interrupt manages to + * modify SIO_IE between our reads of SIO_IR and SIO_IE, we may + * think we have observed SIO_IR&SIO_IE==0 when in fact this + * condition never really occurred. + * + * To solve this, we use a simple spinlock that must be held + * whenever modifying SIO_IE; holding this lock while observing + * both SIO_IR and SIO_IE guarantees that we do not falsely + * conclude that no enabled interrupts are pending. + */ + +static inline uint32_t +pending_intrs(struct ioc4_soft *soft, int type) +{ + struct ioc4_mem __iomem *mem = soft->is_ioc4_mem_addr; + unsigned long flag; + uint32_t intrs = 0; + + BUG_ON(!((type == IOC4_SIO_INTR_TYPE) + || (type == IOC4_OTHER_INTR_TYPE))); + + spin_lock_irqsave(&soft->is_ir_lock, flag); + + switch (type) { + case IOC4_SIO_INTR_TYPE: + intrs = readl(&mem->sio_ir) & readl(&mem->sio_ies_ro); + break; + + case IOC4_OTHER_INTR_TYPE: + intrs = readl(&mem->other_ir) & readl(&mem->other_ies_ro); + + /* Don't process any ATA interrupte */ + intrs &= ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR); + break; + + default: + break; + } + spin_unlock_irqrestore(&soft->is_ir_lock, flag); + return intrs; +} + +/** + * port_init - Initialize the sio and ioc4 hardware for a given port + * called per port from attach... + * @port: port to initialize + */ +static int inline port_init(struct ioc4_port *port) +{ + uint32_t sio_cr; + struct hooks *hooks = port->ip_hooks; + struct ioc4_uartregs __iomem *uart; + + /* Idle the IOC4 serial interface */ + writel(IOC4_SSCR_RESET, &port->ip_serial_regs->sscr); + + /* Wait until any pending bus activity for this port has ceased */ + do + sio_cr = readl(&port->ip_mem->sio_cr); + while (!(sio_cr & IOC4_SIO_CR_SIO_DIAG_IDLE)); + + /* Finish reset sequence */ + writel(0, &port->ip_serial_regs->sscr); + + /* Once RESET is done, reload cached tx_prod and rx_cons values + * and set rings to empty by making prod == cons + */ + port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; + writel(port->ip_tx_prod, &port->ip_serial_regs->stpir); + port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; + writel(port->ip_rx_cons, &port->ip_serial_regs->srcir); + + /* Disable interrupts for this 16550 */ + uart = port->ip_uart_regs; + writeb(0, &uart->i4u_lcr); + writeb(0, &uart->i4u_ier); + + /* Set the default baud */ + set_baud(port, port->ip_baud); + + /* Set line control to 8 bits no parity */ + writeb(UART_LCR_WLEN8 | 0, &uart->i4u_lcr); + /* UART_LCR_STOP == 1 stop */ + + /* Enable the FIFOs */ + writeb(UART_FCR_ENABLE_FIFO, &uart->i4u_fcr); + /* then reset 16550 FIFOs */ + writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + &uart->i4u_fcr); + + /* Clear modem control register */ + writeb(0, &uart->i4u_mcr); + + /* Clear deltas in modem status register */ + readb(&uart->i4u_msr); + + /* Only do this once per port pair */ + if (port->ip_hooks == &hooks_array[0] + || port->ip_hooks == &hooks_array[2]) { + unsigned long ring_pci_addr; + uint32_t __iomem *sbbr_l; + uint32_t __iomem *sbbr_h; + + if (port->ip_hooks == &hooks_array[0]) { + sbbr_l = &port->ip_serial->sbbr01_l; + sbbr_h = &port->ip_serial->sbbr01_h; + } else { + sbbr_l = &port->ip_serial->sbbr23_l; + sbbr_h = &port->ip_serial->sbbr23_h; + } + + ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf; + DPRINT_CONFIG(("%s: ring_pci_addr 0x%lx\n", + __FUNCTION__, ring_pci_addr)); + + writel((unsigned int)((uint64_t)ring_pci_addr >> 32), sbbr_h); + writel((unsigned int)ring_pci_addr | IOC4_BUF_SIZE_BIT, sbbr_l); + } + + /* Set the receive timeout value to 10 msec */ + writel(IOC4_SRTR_HZ / 100, &port->ip_serial_regs->srtr); + + /* Set rx threshold, enable DMA */ + /* Set high water mark at 3/4 of full ring */ + port->ip_sscr = (ENTRIES_PER_RING * 3 / 4); + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + + /* Disable and clear all serial related interrupt bits */ + write_ireg(port->ip_ioc4_soft, hooks->intr_clear, + IOC4_W_IEC, IOC4_SIO_INTR_TYPE); + port->ip_ienb &= ~hooks->intr_clear; + writel(hooks->intr_clear, &port->ip_mem->sio_ir); + return 0; +} + +/** + * handle_dma_error_intr - service any pending DMA error interrupts for the + * given port - 2nd level called via sd_intr + * @arg: handler arg + * @other_ir: ioc4regs + */ +static void handle_dma_error_intr(void *arg, uint32_t other_ir) +{ + struct ioc4_port *port = (struct ioc4_port *)arg; + struct hooks *hooks = port->ip_hooks; + unsigned int flags; + + spin_lock_irqsave(&port->ip_lock, flags); + + /* ACK the interrupt */ + writel(hooks->intr_dma_error, &port->ip_mem->other_ir); + + if (readl(&port->ip_mem->pci_err_addr_l) & IOC4_PCI_ERR_ADDR_VLD) { + printk(KERN_ERR + "PCI error address is 0x%lx, " + "master is serial port %c %s\n", + (((uint64_t)readl(&port->ip_mem->pci_err_addr_h) + << 32) + | readl(&port->ip_mem->pci_err_addr_l)) + & IOC4_PCI_ERR_ADDR_ADDR_MSK, '1' + + ((char)(readl(&port->ip_mem-> pci_err_addr_l) & + IOC4_PCI_ERR_ADDR_MST_NUM_MSK) >> 1), + (readl(&port->ip_mem->pci_err_addr_l) + & IOC4_PCI_ERR_ADDR_MST_TYP_MSK) + ? "RX" : "TX"); + + if (readl(&port->ip_mem->pci_err_addr_l) + & IOC4_PCI_ERR_ADDR_MUL_ERR) { + printk(KERN_ERR + "Multiple errors occurred\n"); + } + } + spin_unlock_irqrestore(&port->ip_lock, flags); + + /* Re-enable DMA error interrupts */ + write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, IOC4_W_IES, + IOC4_OTHER_INTR_TYPE); +} + +/** + * intr_connect - interrupt connect function + * @soft: soft struct for this card + * @type: interrupt type + * @intrbits: bit pattern to set + * @intr: handler function + * @info: handler arg + */ +static void +intr_connect(struct ioc4_soft *soft, int type, + uint32_t intrbits, ioc4_intr_func_f * intr, void *info) +{ + int i; + struct ioc4_intr_info *intr_ptr; + + BUG_ON(!((type == IOC4_SIO_INTR_TYPE) + || (type == IOC4_OTHER_INTR_TYPE))); + + i = atomic_inc(&soft-> is_intr_type[type].is_num_intrs) - 1; + BUG_ON(!(i < MAX_IOC4_INTR_ENTS || (printk("i %d\n", i), 0))); + + /* Save off the lower level interrupt handler */ + intr_ptr = &soft->is_intr_type[type].is_intr_info[i]; + intr_ptr->sd_bits = intrbits; + intr_ptr->sd_intr = intr; + intr_ptr->sd_info = info; +} + +/** + * ioc4_intr - Top level IOC4 interrupt handler. + * @irq: irq value + * @arg: handler arg + * @regs: registers + */ +static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs) +{ + struct ioc4_soft *soft; + uint32_t this_ir, this_mir; + int xx, num_intrs = 0; + int intr_type; + int handled = 0; + struct ioc4_intr_info *ii; + + soft = arg; + for (intr_type = 0; intr_type < IOC4_NUM_INTR_TYPES; intr_type++) { + num_intrs = (int)atomic_read( + &soft->is_intr_type[intr_type].is_num_intrs); + + this_mir = this_ir = pending_intrs(soft, intr_type); + + /* Farm out the interrupt to the various drivers depending on + * which interrupt bits are set. + */ + for (xx = 0; xx < num_intrs; xx++) { + ii = &soft->is_intr_type[intr_type].is_intr_info[xx]; + if ((this_mir = this_ir & ii->sd_bits)) { + /* Disable owned interrupts, call handler */ + handled++; + write_ireg(soft, ii->sd_bits, IOC4_W_IEC, + intr_type); + ii->sd_intr(ii->sd_info, this_mir); + this_ir &= ~this_mir; + } + } + if (this_ir) { + printk(KERN_ERR + "unknown IOC4 %s interrupt 0x%x, sio_ir = 0x%x," + " sio_ies = 0x%x, other_ir = 0x%x :" + "other_ies = 0x%x\n", + (intr_type == IOC4_SIO_INTR_TYPE) ? "sio" : + "other", this_ir, + readl(&soft->is_ioc4_mem_addr->sio_ir), + readl(&soft->is_ioc4_mem_addr->sio_ies_ro), + readl(&soft->is_ioc4_mem_addr->other_ir), + readl(&soft->is_ioc4_mem_addr->other_ies_ro)); + } + } +#ifdef DEBUG_INTERRUPTS + { + struct ioc4_mem __iomem *mem = soft->is_ioc4_mem_addr; + spinlock_t *lp = &soft->is_ir_lock; + unsigned long flag; + + spin_lock_irqsave(&soft->is_ir_lock, flag); + printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies_ro 0x%x " + "other_ir 0x%x other_ies_ro 0x%x mask 0x%x\n", + __FUNCTION__, __LINE__, + (void *)mem, readl(&mem->sio_ir), + readl(&mem->sio_ies_ro), + readl(&mem->other_ir), + readl(&mem->other_ies_ro), + IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR); + spin_unlock_irqrestore(&soft->is_ir_lock, flag); + } +#endif + return handled ? IRQ_HANDLED : IRQ_NONE; +} + +/** + * ioc4_attach_local - Device initialization. + * Called at *_attach() time for each + * IOC4 with serial ports in the system. + * @control: ioc4_control ptr + * @pdev: PCI handle for this device + * @soft: soft struct for this device + * @ioc4: ioc4 mem space + */ +static int inline ioc4_attach_local(struct pci_dev *pdev, + struct ioc4_control *control, + struct ioc4_soft *soft, void __iomem *ioc4_mem, + void __iomem *ioc4_serial) +{ + struct ioc4_port *port; + struct ioc4_port *ports[IOC4_NUM_SERIAL_PORTS]; + int port_number; + uint16_t ioc4_revid_min = 62; + uint16_t ioc4_revid; + + /* IOC4 firmware must be at least rev 62 */ + pci_read_config_word(pdev, PCI_COMMAND_SPECIAL, &ioc4_revid); + + printk(KERN_INFO "IOC4 firmware revision %d\n", ioc4_revid); + if (ioc4_revid < ioc4_revid_min) { + printk(KERN_WARNING + "IOC4 serial not supported on firmware rev %d, " + "please upgrade to rev %d or higher\n", + ioc4_revid, ioc4_revid_min); + return -EPERM; + } + BUG_ON(ioc4_mem == NULL); + BUG_ON(ioc4_serial == NULL); + + /* Create port structures for each port */ + for (port_number = 0; port_number < IOC4_NUM_SERIAL_PORTS; + port_number++) { + port = kmalloc(sizeof(struct ioc4_port), GFP_KERNEL); + if (!port) { + printk(KERN_WARNING + "IOC4 serial memory not available for port\n"); + return -ENOMEM; + } + memset(port, 0, sizeof(struct ioc4_port)); + + /* we need to remember the previous ones, to point back to + * them farther down - setting up the ring buffers. + */ + ports[port_number] = port; + + /* Allocate buffers and jumpstart the hardware. */ + control->ic_port[port_number].icp_port = port; + port->ip_ioc4_soft = soft; + port->ip_pdev = pdev; + port->ip_ienb = 0; + port->ip_pci_bus_speed = IOC4_SER_XIN_CLK; + port->ip_baud = 9600; + port->ip_control = control; + port->ip_mem = ioc4_mem; + port->ip_serial = ioc4_serial; + + /* point to the right hook */ + port->ip_hooks = &hooks_array[port_number]; + + /* Get direct hooks to the serial regs and uart regs + * for this port + */ + switch (port_number) { + case 0: + port->ip_serial_regs = &(port->ip_serial->port_0); + port->ip_uart_regs = &(port->ip_serial->uart_0); + break; + case 1: + port->ip_serial_regs = &(port->ip_serial->port_1); + port->ip_uart_regs = &(port->ip_serial->uart_1); + break; + case 2: + port->ip_serial_regs = &(port->ip_serial->port_2); + port->ip_uart_regs = &(port->ip_serial->uart_2); + break; + default: + case 3: + port->ip_serial_regs = &(port->ip_serial->port_3); + port->ip_uart_regs = &(port->ip_serial->uart_3); + break; + } + + /* ring buffers are 1 to a pair of ports */ + if (port_number && (port_number & 1)) { + /* odd use the evens buffer */ + port->ip_dma_ringbuf = + ports[port_number - 1]->ip_dma_ringbuf; + port->ip_cpu_ringbuf = + ports[port_number - 1]->ip_cpu_ringbuf; + port->ip_inring = RING(port, RX_1_OR_3); + port->ip_outring = RING(port, TX_1_OR_3); + + } else { + if (port->ip_dma_ringbuf == 0) { + port->ip_cpu_ringbuf = pci_alloc_consistent + (pdev, TOTAL_RING_BUF_SIZE, + &port->ip_dma_ringbuf); + + } + BUG_ON(!((((int64_t)port->ip_dma_ringbuf) & + (TOTAL_RING_BUF_SIZE - 1)) == 0)); + DPRINT_CONFIG(("%s : ip_cpu_ringbuf 0x%p " + "ip_dma_ringbuf 0x%p\n", + __FUNCTION__, + (void *)port->ip_cpu_ringbuf, + (void *)port->ip_dma_ringbuf)); + port->ip_inring = RING(port, RX_0_OR_2); + port->ip_outring = RING(port, TX_0_OR_2); + } + DPRINT_CONFIG(("%s : port %d [addr 0x%p] control 0x%p", + __FUNCTION__, + port_number, (void *)port, (void *)control)); + DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n", + (void *)port->ip_serial_regs, + (void *)port->ip_uart_regs)); + + /* Initialize the hardware for IOC4 */ + port_init(port); + + DPRINT_CONFIG(("%s: port_number %d port 0x%p inring 0x%p " + "outring 0x%p\n", + __FUNCTION__, + port_number, (void *)port, + (void *)port->ip_inring, + (void *)port->ip_outring)); + + /* Attach interrupt handlers */ + intr_connect(soft, IOC4_SIO_INTR_TYPE, + GET_SIO_IR(port_number), + handle_intr, port); + + intr_connect(soft, IOC4_OTHER_INTR_TYPE, + GET_OTHER_IR(port_number), + handle_dma_error_intr, port); + } + return 0; +} + +/** + * enable_intrs - enable interrupts + * @port: port to enable + * @mask: mask to use + */ +static void enable_intrs(struct ioc4_port *port, uint32_t mask) +{ + struct hooks *hooks = port->ip_hooks; + + if ((port->ip_ienb & mask) != mask) { + write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IES, + IOC4_SIO_INTR_TYPE); + port->ip_ienb |= mask; + } + + if (port->ip_ienb) + write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, + IOC4_W_IES, IOC4_OTHER_INTR_TYPE); +} + +/** + * local_open - local open a port + * @port: port to open + */ +static inline int local_open(struct ioc4_port *port) +{ + int spiniter = 0; + + port->ip_flags = 0; + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while((readl(&port->ip_serial_regs-> sscr) + & IOC4_SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) { + return -1; + } + } + } + + /* Reset the input fifo. If the uart received chars while the port + * was closed and DMA is not enabled, the uart may have a bunch of + * chars hanging around in its rx fifo which will not be discarded + * by rclr in the upper layer. We must get rid of them here. + */ + writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR, + &port->ip_uart_regs->i4u_fcr); + + writeb(UART_LCR_WLEN8, &port->ip_uart_regs->i4u_lcr); + /* UART_LCR_STOP == 1 stop */ + + /* Re-enable DMA, set default threshold to intr whenever there is + * data available. + */ + port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD; + port->ip_sscr |= 1; /* default threshold */ + + /* Plug in the new sscr. This implicitly clears the DMA_PAUSE + * flag if it was set above + */ + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + port->ip_tx_lowat = 1; + return 0; +} + +/** + * set_rx_timeout - Set rx timeout and threshold values. + * @port: port to use + * @timeout: timeout value in ticks + */ +static inline int set_rx_timeout(struct ioc4_port *port, int timeout) +{ + int threshold; + + port->ip_rx_timeout = timeout; + + /* Timeout is in ticks. Let's figure out how many chars we + * can receive at the current baud rate in that interval + * and set the rx threshold to that amount. There are 4 chars + * per ring entry, so we'll divide the number of chars that will + * arrive in timeout by 4. + */ + threshold = timeout * port->ip_baud / 10 / HZ / 4; + if (threshold == 0) + threshold = 1; /* otherwise we'll intr all the time! */ + + if ((unsigned)threshold > (unsigned)IOC4_SSCR_RX_THRESHOLD) + return 1; + + port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD; + port->ip_sscr |= threshold; + + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + + /* Now set the rx timeout to the given value */ + timeout = timeout * IOC4_SRTR_HZ / HZ; + if (timeout > IOC4_SRTR_CNT) + timeout = IOC4_SRTR_CNT; + + writel(timeout, &port->ip_serial_regs->srtr); + return 0; +} + +/** + * config_port - config the hardware + * @port: port to config + * @baud: baud rate for the port + * @byte_size: data size + * @stop_bits: number of stop bits + * @parenb: parity enable ? + * @parodd: odd parity ? + */ +static inline int +config_port(struct ioc4_port *port, + int baud, int byte_size, int stop_bits, int parenb, int parodd) +{ + char lcr, sizebits; + int spiniter = 0; + + DPRINT_CONFIG(("%s: baud %d byte_size %d stop %d parenb %d parodd %d\n", + __FUNCTION__, baud, byte_size, stop_bits, parenb, parodd)); + + if (set_baud(port, baud)) + return 1; + + switch (byte_size) { + case 5: + sizebits = UART_LCR_WLEN5; + break; + case 6: + sizebits = UART_LCR_WLEN6; + break; + case 7: + sizebits = UART_LCR_WLEN7; + break; + case 8: + sizebits = UART_LCR_WLEN8; + break; + default: + return 1; + } + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while((readl(&port->ip_serial_regs->sscr) + & IOC4_SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) + return -1; + } + } + + /* Clear relevant fields in lcr */ + lcr = readb(&port->ip_uart_regs->i4u_lcr); + lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR | + UART_LCR_PARITY | LCR_MASK_STOP_BITS); + + /* Set byte size in lcr */ + lcr |= sizebits; + + /* Set parity */ + if (parenb) { + lcr |= UART_LCR_PARITY; + if (!parodd) + lcr |= UART_LCR_EPAR; + } + + /* Set stop bits */ + if (stop_bits) + lcr |= UART_LCR_STOP /* 2 stop bits */ ; + + writeb(lcr, &port->ip_uart_regs->i4u_lcr); + + /* Re-enable the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + port->ip_baud = baud; + + /* When we get within this number of ring entries of filling the + * entire ring on tx, place an EXPLICIT intr to generate a lowat + * notification when output has drained. + */ + port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4; + if (port->ip_tx_lowat == 0) + port->ip_tx_lowat = 1; + + set_rx_timeout(port, port->ip_rx_timeout); + + return 0; +} + +/** + * do_write - Write bytes to the port. Returns the number of bytes + * actually written. Called from transmit_chars + * @port: port to use + * @buf: the stuff to write + * @len: how many bytes in 'buf' + */ +static inline int do_write(struct ioc4_port *port, char *buf, int len) +{ + int prod_ptr, cons_ptr, total = 0; + struct ring *outring; + struct ring_entry *entry; + struct hooks *hooks = port->ip_hooks; + + BUG_ON(!(len >= 0)); + + prod_ptr = port->ip_tx_prod; + cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; + outring = port->ip_outring; + + /* Maintain a 1-entry red-zone. The ring buffer is full when + * (cons - prod) % ring_size is 1. Rather than do this subtraction + * in the body of the loop, I'll do it now. + */ + cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK; + + /* Stuff the bytes into the output */ + while ((prod_ptr != cons_ptr) && (len > 0)) { + int xx; + + /* Get 4 bytes (one ring entry) at a time */ + entry = (struct ring_entry *)((caddr_t) outring + prod_ptr); + + /* Invalidate all entries */ + entry->ring_allsc = 0; + + /* Copy in some bytes */ + for (xx = 0; (xx < 4) && (len > 0); xx++) { + entry->ring_data[xx] = *buf++; + entry->ring_sc[xx] = IOC4_TXCB_VALID; + len--; + total++; + } + + /* If we are within some small threshold of filling up the + * entire ring buffer, we must place an EXPLICIT intr here + * to generate a lowat interrupt in case we subsequently + * really do fill up the ring and the caller goes to sleep. + * No need to place more than one though. + */ + if (!(port->ip_flags & LOWAT_WRITTEN) && + ((cons_ptr - prod_ptr) & PROD_CONS_MASK) + <= port->ip_tx_lowat + * (int)sizeof(struct ring_entry)) { + port->ip_flags |= LOWAT_WRITTEN; + entry->ring_sc[0] |= IOC4_TXCB_INT_WHEN_DONE; + } + + /* Go on to next entry */ + prod_ptr += sizeof(struct ring_entry); + prod_ptr &= PROD_CONS_MASK; + } + + /* If we sent something, start DMA if necessary */ + if (total > 0 && !(port->ip_sscr & IOC4_SSCR_DMA_EN)) { + port->ip_sscr |= IOC4_SSCR_DMA_EN; + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + + /* Store the new producer pointer. If tx is disabled, we stuff the + * data into the ring buffer, but we don't actually start tx. + */ + if (!uart_tx_stopped(port->ip_port)) { + writel(prod_ptr, &port->ip_serial_regs->stpir); + + /* If we are now transmitting, enable tx_mt interrupt so we + * can disable DMA if necessary when the tx finishes. + */ + if (total > 0) + enable_intrs(port, hooks->intr_tx_mt); + } + port->ip_tx_prod = prod_ptr; + return total; +} + +/** + * disable_intrs - disable interrupts + * @port: port to enable + * @mask: mask to use + */ +static void disable_intrs(struct ioc4_port *port, uint32_t mask) +{ + struct hooks *hooks = port->ip_hooks; + + if (port->ip_ienb & mask) { + write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IEC, + IOC4_SIO_INTR_TYPE); + port->ip_ienb &= ~mask; + } + + if (!port->ip_ienb) + write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, + IOC4_W_IEC, IOC4_OTHER_INTR_TYPE); +} + +/** + * set_notification - Modify event notification + * @port: port to use + * @mask: events mask + * @set_on: set ? + */ +static int set_notification(struct ioc4_port *port, int mask, int set_on) +{ + struct hooks *hooks = port->ip_hooks; + uint32_t intrbits, sscrbits; + + BUG_ON(!mask); + + intrbits = sscrbits = 0; + + if (mask & N_DATA_READY) + intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high); + if (mask & N_OUTPUT_LOWAT) + intrbits |= hooks->intr_tx_explicit; + if (mask & N_DDCD) { + intrbits |= hooks->intr_delta_dcd; + sscrbits |= IOC4_SSCR_RX_RING_DCD; + } + if (mask & N_DCTS) + intrbits |= hooks->intr_delta_cts; + + if (set_on) { + enable_intrs(port, intrbits); + port->ip_notify |= mask; + port->ip_sscr |= sscrbits; + } else { + disable_intrs(port, intrbits); + port->ip_notify &= ~mask; + port->ip_sscr &= ~sscrbits; + } + + /* We require DMA if either DATA_READY or DDCD notification is + * currently requested. If neither of these is requested and + * there is currently no tx in progress, DMA may be disabled. + */ + if (port->ip_notify & (N_DATA_READY | N_DDCD)) + port->ip_sscr |= IOC4_SSCR_DMA_EN; + else if (!(port->ip_ienb & hooks->intr_tx_mt)) + port->ip_sscr &= ~IOC4_SSCR_DMA_EN; + + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + return 0; +} + +/** + * set_mcr - set the master control reg + * @the_port: port to use + * @set: set ? + * @mask1: mcr mask + * @mask2: shadow mask + */ +static inline int set_mcr(struct uart_port *the_port, int set, + int mask1, int mask2) +{ + struct ioc4_port *port = get_ioc4_port(the_port); + uint32_t shadow; + int spiniter = 0; + char mcr; + + if (!port) + return -1; + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while ((readl(&port->ip_serial_regs->sscr) + & IOC4_SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) + return -1; + } + } + shadow = readl(&port->ip_serial_regs->shadow); + mcr = (shadow & 0xff000000) >> 24; + + /* Set new value */ + if (set) { + mcr |= mask1; + shadow |= mask2; + } else { + mcr &= ~mask1; + shadow &= ~mask2; + } + writeb(mcr, &port->ip_uart_regs->i4u_mcr); + writel(shadow, &port->ip_serial_regs->shadow); + + /* Re-enable the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + return 0; +} + +/** + * ioc4_set_proto - set the protocol for the port + * @port: port to use + * @proto: protocol to use + */ +static int ioc4_set_proto(struct ioc4_port *port, enum sio_proto proto) +{ + struct hooks *hooks = port->ip_hooks; + + switch (proto) { + case PROTO_RS232: + /* Clear the appropriate GIO pin */ + writel(0, (&port->ip_mem->gppr_0 + + hooks->rs422_select_pin)); + break; + + case PROTO_RS422: + /* Set the appropriate GIO pin */ + writel(1, (&port->ip_mem->gppr_0 + + hooks->rs422_select_pin)); + break; + + default: + return 1; + } + return 0; +} + +/** + * transmit_chars - upper level write, called with ip_lock + * @the_port: port to write + */ +static void transmit_chars(struct uart_port *the_port) +{ + int xmit_count, tail, head; + int result; + char *start; + struct tty_struct *tty; + struct ioc4_port *port = get_ioc4_port(the_port); + struct uart_info *info; + + if (!the_port) + return; + if (!port) + return; + + info = the_port->info; + tty = info->tty; + + if (uart_circ_empty(&info->xmit) || uart_tx_stopped(the_port)) { + /* Nothing to do or hw stopped */ + set_notification(port, N_ALL_OUTPUT, 0); + return; + } + + head = info->xmit.head; + tail = info->xmit.tail; + start = (char *)&info->xmit.buf[tail]; + + /* write out all the data or until the end of the buffer */ + xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail); + if (xmit_count > 0) { + result = do_write(port, start, xmit_count); + if (result > 0) { + /* booking */ + xmit_count -= result; + the_port->icount.tx += result; + /* advance the pointers */ + tail += result; + tail &= UART_XMIT_SIZE - 1; + info->xmit.tail = tail; + start = (char *)&info->xmit.buf[tail]; + } + } + if (uart_circ_chars_pending(&info->xmit) < WAKEUP_CHARS) + uart_write_wakeup(the_port); + + if (uart_circ_empty(&info->xmit)) { + set_notification(port, N_OUTPUT_LOWAT, 0); + } else { + set_notification(port, N_OUTPUT_LOWAT, 1); + } +} + +/** + * ioc4_change_speed - change the speed of the port + * @the_port: port to change + * @new_termios: new termios settings + * @old_termios: old termios settings + */ +static void +ioc4_change_speed(struct uart_port *the_port, + struct termios *new_termios, struct termios *old_termios) +{ + struct ioc4_port *port = get_ioc4_port(the_port); + int baud, bits; + unsigned cflag, cval; + int new_parity = 0, new_parity_enable = 0, new_stop = 1, new_data = 8; + struct uart_info *info = the_port->info; + + cflag = new_termios->c_cflag; + + switch (cflag & CSIZE) { + case CS5: + new_data = 5; + cval = 0x00; + bits = 7; + break; + case CS6: + new_data = 6; + cval = 0x01; + bits = 8; + break; + case CS7: + new_data = 7; + cval = 0x02; + bits = 9; + break; + case CS8: + new_data = 8; + cval = 0x03; + bits = 10; + break; + default: + /* cuz we always need a default ... */ + new_data = 5; + cval = 0x00; + bits = 7; + break; + } + if (cflag & CSTOPB) { + cval |= 0x04; + bits++; + new_stop = 1; + } + if (cflag & PARENB) { + cval |= UART_LCR_PARITY; + bits++; + new_parity_enable = 1; + } + if (cflag & PARODD) { + cval |= UART_LCR_EPAR; + new_parity = 1; + } + if (cflag & IGNPAR) { + cval &= ~UART_LCR_PARITY; + new_parity_enable = 0; + } + baud = uart_get_baud_rate(the_port, new_termios, old_termios, + MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED); + DPRINT_CONFIG(("%s: returned baud %d\n", __FUNCTION__, baud)); + + /* default is 9600 */ + if (!baud) + baud = 9600; + + if (!the_port->fifosize) + the_port->fifosize = IOC4_MAX_CHARS; + the_port->timeout = ((the_port->fifosize * HZ * bits) / (baud / 10)); + the_port->timeout += HZ / 50; /* Add .02 seconds of slop */ + + the_port->ignore_status_mask = N_ALL_INPUT; + + if (I_IGNPAR(info->tty)) + the_port->ignore_status_mask &= ~(N_PARITY_ERROR + | N_FRAMING_ERROR); + if (I_IGNBRK(info->tty)) { + the_port->ignore_status_mask &= ~N_BREAK; + if (I_IGNPAR(info->tty)) + the_port->ignore_status_mask &= ~N_OVERRUN_ERROR; + } + if (!(cflag & CREAD)) { + /* ignore everything */ + the_port->ignore_status_mask &= ~N_DATA_READY; + } + + if (cflag & CRTSCTS) + info->flags |= ASYNC_CTS_FLOW; + else + info->flags &= ~ASYNC_CTS_FLOW; + + /* Set the configuration and proper notification call */ + DPRINT_CONFIG(("%s : port 0x%p cflag 0%o " + "config_port(baud %d data %d stop %d p enable %d parity %d)," + " notification 0x%x\n", + __FUNCTION__, (void *)port, cflag, baud, new_data, new_stop, + new_parity_enable, new_parity, the_port->ignore_status_mask)); + + if ((config_port(port, baud, /* baud */ + new_data, /* byte size */ + new_stop, /* stop bits */ + new_parity_enable, /* set parity */ + new_parity)) >= 0) { /* parity 1==odd */ + set_notification(port, the_port->ignore_status_mask, 1); + } +} + +/** + * ic4_startup_local - Start up the serial port - returns >= 0 if no errors + * @the_port: Port to operate on + */ +static inline int ic4_startup_local(struct uart_port *the_port) +{ + int retval = 0; + struct ioc4_port *port; + struct uart_info *info; + + if (!the_port) + return -1; + + port = get_ioc4_port(the_port); + if (!port) + return -1; + + info = the_port->info; + if (info->flags & UIF_INITIALIZED) { + return retval; + } + + if (info->tty) { + set_bit(TTY_IO_ERROR, &info->tty->flags); + clear_bit(TTY_IO_ERROR, &info->tty->flags); + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + info->tty->alt_speed = 57600; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + info->tty->alt_speed = 115200; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + info->tty->alt_speed = 230400; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + info->tty->alt_speed = 460800; + } + local_open(port); + + /* set the speed of the serial port */ + ioc4_change_speed(the_port, info->tty->termios, (struct termios *)0); + + /* enable hardware flow control - after ioc4_change_speed because + * ASYNC_CTS_FLOW is set there */ + if (info->flags & ASYNC_CTS_FLOW) { + port->ip_sscr |= IOC4_SSCR_HFC_EN; + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + info->flags |= UIF_INITIALIZED; + return 0; +} + +/* + * ioc4_cb_output_lowat - called when the output low water mark is hit + * @port: port to output + */ +static void ioc4_cb_output_lowat(struct ioc4_port *port) +{ + /* ip_lock is set on the call here */ + if (port->ip_port) { + transmit_chars(port->ip_port); + } +} + + +/** + * handle_intr - service any interrupts for the given port - 2nd level + * called via sd_intr + * @arg: handler arg + * @sio_ir: ioc4regs + */ +static void handle_intr(void *arg, uint32_t sio_ir) +{ + struct ioc4_port *port = (struct ioc4_port *)arg; + struct hooks *hooks = port->ip_hooks; + unsigned int rx_high_rd_aborted = 0; + unsigned int flags; + struct uart_port *the_port; + int loop_counter; + + /* Possible race condition here: The tx_mt interrupt bit may be + * cleared without the intervention of the interrupt handler, + * e.g. by a write. If the top level interrupt handler reads a + * tx_mt, then some other processor does a write, starting up + * output, then we come in here, see the tx_mt and stop DMA, the + * output started by the other processor will hang. Thus we can + * only rely on tx_mt being legitimate if it is read while the + * port lock is held. Therefore this bit must be ignored in the + * passed in interrupt mask which was read by the top level + * interrupt handler since the port lock was not held at the time + * it was read. We can only rely on this bit being accurate if it + * is read while the port lock is held. So we'll clear it for now, + * and reload it later once we have the port lock. + */ + sio_ir &= ~(hooks->intr_tx_mt); + + spin_lock_irqsave(&port->ip_lock, flags); + + loop_counter = MAXITER; /* to avoid hangs */ + + do { + uint32_t shadow; + + if ( loop_counter-- <= 0 ) { + printk(KERN_WARNING "IOC4 serial: " + "possible hang condition/" + "port stuck on interrupt.\n"); + break; + } + + /* Handle a DCD change */ + if (sio_ir & hooks->intr_delta_dcd) { + /* ACK the interrupt */ + writel(hooks->intr_delta_dcd, + &port->ip_mem->sio_ir); + + shadow = readl(&port->ip_serial_regs->shadow); + + if ((port->ip_notify & N_DDCD) + && (shadow & IOC4_SHADOW_DCD) + && (port->ip_port)) { + the_port = port->ip_port; + the_port->icount.dcd = 1; + wake_up_interruptible + (&the_port-> info->delta_msr_wait); + } else if ((port->ip_notify & N_DDCD) + && !(shadow & IOC4_SHADOW_DCD)) { + /* Flag delta DCD/no DCD */ + port->ip_flags |= DCD_ON; + } + } + + /* Handle a CTS change */ + if (sio_ir & hooks->intr_delta_cts) { + /* ACK the interrupt */ + writel(hooks->intr_delta_cts, + &port->ip_mem->sio_ir); + + shadow = readl(&port->ip_serial_regs->shadow); + + if ((port->ip_notify & N_DCTS) + && (port->ip_port)) { + the_port = port->ip_port; + the_port->icount.cts = + (shadow & IOC4_SHADOW_CTS) ? 1 : 0; + wake_up_interruptible + (&the_port->info->delta_msr_wait); + } + } + + /* rx timeout interrupt. Must be some data available. Put this + * before the check for rx_high since servicing this condition + * may cause that condition to clear. + */ + if (sio_ir & hooks->intr_rx_timer) { + /* ACK the interrupt */ + writel(hooks->intr_rx_timer, + &port->ip_mem->sio_ir); + + if ((port->ip_notify & N_DATA_READY) + && (port->ip_port)) { + /* ip_lock is set on call here */ + receive_chars(port->ip_port); + } + } + + /* rx high interrupt. Must be after rx_timer. */ + else if (sio_ir & hooks->intr_rx_high) { + /* Data available, notify upper layer */ + if ((port->ip_notify & N_DATA_READY) + && port->ip_port) { + /* ip_lock is set on call here */ + receive_chars(port->ip_port); + } + + /* We can't ACK this interrupt. If receive_chars didn't + * cause the condition to clear, we'll have to disable + * the interrupt until the data is drained. + * If the read was aborted, don't disable the interrupt + * as this may cause us to hang indefinitely. An + * aborted read generally means that this interrupt + * hasn't been delivered to the cpu yet anyway, even + * though we see it as asserted when we read the sio_ir. + */ + if ((sio_ir = PENDING(port)) & hooks->intr_rx_high) { + if ((port->ip_flags & READ_ABORTED) == 0) { + port->ip_ienb &= ~hooks->intr_rx_high; + port->ip_flags |= INPUT_HIGH; + } else { + rx_high_rd_aborted++; + } + } + } + + /* We got a low water interrupt: notify upper layer to + * send more data. Must come before tx_mt since servicing + * this condition may cause that condition to clear. + */ + if (sio_ir & hooks->intr_tx_explicit) { + port->ip_flags &= ~LOWAT_WRITTEN; + + /* ACK the interrupt */ + writel(hooks->intr_tx_explicit, + &port->ip_mem->sio_ir); + + if (port->ip_notify & N_OUTPUT_LOWAT) + ioc4_cb_output_lowat(port); + } + + /* Handle tx_mt. Must come after tx_explicit. */ + else if (sio_ir & hooks->intr_tx_mt) { + /* If we are expecting a lowat notification + * and we get to this point it probably means that for + * some reason the tx_explicit didn't work as expected + * (that can legitimately happen if the output buffer is + * filled up in just the right way). + * So send the notification now. + */ + if (port->ip_notify & N_OUTPUT_LOWAT) { + ioc4_cb_output_lowat(port); + + /* We need to reload the sio_ir since the lowat + * call may have caused another write to occur, + * clearing the tx_mt condition. + */ + sio_ir = PENDING(port); + } + + /* If the tx_mt condition still persists even after the + * lowat call, we've got some work to do. + */ + if (sio_ir & hooks->intr_tx_mt) { + + /* If we are not currently expecting DMA input, + * and the transmitter has just gone idle, + * there is no longer any reason for DMA, so + * disable it. + */ + if (!(port->ip_notify + & (N_DATA_READY | N_DDCD))) { + BUG_ON(!(port->ip_sscr + & IOC4_SSCR_DMA_EN)); + port->ip_sscr &= ~IOC4_SSCR_DMA_EN; + writel(port->ip_sscr, + &port->ip_serial_regs->sscr); + } + + /* Prevent infinite tx_mt interrupt */ + port->ip_ienb &= ~hooks->intr_tx_mt; + } + } + sio_ir = PENDING(port); + + /* if the read was aborted and only hooks->intr_rx_high, + * clear hooks->intr_rx_high, so we do not loop forever. + */ + + if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) { + sio_ir &= ~hooks->intr_rx_high; + } + } while (sio_ir & hooks->intr_all); + + spin_unlock_irqrestore(&port->ip_lock, flags); + + /* Re-enable interrupts before returning from interrupt handler. + * Getting interrupted here is okay. It'll just v() our semaphore, and + * we'll come through the loop again. + */ + + write_ireg(port->ip_ioc4_soft, port->ip_ienb, IOC4_W_IES, + IOC4_SIO_INTR_TYPE); +} + +/* + * ioc4_cb_post_ncs - called for some basic errors + * @port: port to use + * @ncs: event + */ +static void ioc4_cb_post_ncs(struct uart_port *the_port, int ncs) +{ + struct uart_icount *icount; + + icount = &the_port->icount; + + if (ncs & NCS_BREAK) + icount->brk++; + if (ncs & NCS_FRAMING) + icount->frame++; + if (ncs & NCS_OVERRUN) + icount->overrun++; + if (ncs & NCS_PARITY) + icount->parity++; +} + +/** + * do_read - Read in bytes from the port. Return the number of bytes + * actually read. + * @the_port: port to use + * @buf: place to put the stuff we read + * @len: how big 'buf' is + */ + +static inline int do_read(struct uart_port *the_port, unsigned char *buf, + int len) +{ + int prod_ptr, cons_ptr, total; + struct ioc4_port *port = get_ioc4_port(the_port); + struct ring *inring; + struct ring_entry *entry; + struct hooks *hooks = port->ip_hooks; + int byte_num; + char *sc; + int loop_counter; + + BUG_ON(!(len >= 0)); + BUG_ON(!port); + + /* There is a nasty timing issue in the IOC4. When the rx_timer + * expires or the rx_high condition arises, we take an interrupt. + * At some point while servicing the interrupt, we read bytes from + * the ring buffer and re-arm the rx_timer. However the rx_timer is + * not started until the first byte is received *after* it is armed, + * and any bytes pending in the rx construction buffers are not drained + * to memory until either there are 4 bytes available or the rx_timer + * expires. This leads to a potential situation where data is left + * in the construction buffers forever - 1 to 3 bytes were received + * after the interrupt was generated but before the rx_timer was + * re-armed. At that point as long as no subsequent bytes are received + * the timer will never be started and the bytes will remain in the + * construction buffer forever. The solution is to execute a DRAIN + * command after rearming the timer. This way any bytes received before + * the DRAIN will be drained to memory, and any bytes received after + * the DRAIN will start the TIMER and be drained when it expires. + * Luckily, this only needs to be done when the DMA buffer is empty + * since there is no requirement that this function return all + * available data as long as it returns some. + */ + /* Re-arm the timer */ + writel(port->ip_rx_cons | IOC4_SRCIR_ARM, + &port->ip_serial_regs->srcir); + + prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; + cons_ptr = port->ip_rx_cons; + + if (prod_ptr == cons_ptr) { + int reset_dma = 0; + + /* Input buffer appears empty, do a flush. */ + + /* DMA must be enabled for this to work. */ + if (!(port->ip_sscr & IOC4_SSCR_DMA_EN)) { + port->ip_sscr |= IOC4_SSCR_DMA_EN; + reset_dma = 1; + } + + /* Potential race condition: we must reload the srpir after + * issuing the drain command, otherwise we could think the rx + * buffer is empty, then take a very long interrupt, and when + * we come back it's full and we wait forever for the drain to + * complete. + */ + writel(port->ip_sscr | IOC4_SSCR_RX_DRAIN, + &port->ip_serial_regs->sscr); + prod_ptr = readl(&port->ip_serial_regs->srpir) + & PROD_CONS_MASK; + + /* We must not wait for the DRAIN to complete unless there are + * at least 8 bytes (2 ring entries) available to receive the + * data otherwise the DRAIN will never complete and we'll + * deadlock here. + * In fact, to make things easier, I'll just ignore the flush if + * there is any data at all now available. + */ + if (prod_ptr == cons_ptr) { + loop_counter = 0; + while (readl(&port->ip_serial_regs->sscr) & + IOC4_SSCR_RX_DRAIN) { + loop_counter++; + if (loop_counter > MAXITER) + return -1; + } + + /* SIGH. We have to reload the prod_ptr *again* since + * the drain may have caused it to change + */ + prod_ptr = readl(&port->ip_serial_regs->srpir) + & PROD_CONS_MASK; + } + if (reset_dma) { + port->ip_sscr &= ~IOC4_SSCR_DMA_EN; + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + } + inring = port->ip_inring; + port->ip_flags &= ~READ_ABORTED; + + total = 0; + loop_counter = 0xfffff; /* to avoid hangs */ + + /* Grab bytes from the hardware */ + while ((prod_ptr != cons_ptr) && (len > 0)) { + entry = (struct ring_entry *)((caddr_t)inring + cons_ptr); + + if ( loop_counter-- <= 0 ) { + printk(KERN_WARNING "IOC4 serial: " + "possible hang condition/" + "port stuck on read.\n"); + break; + } + + /* According to the producer pointer, this ring entry + * must contain some data. But if the PIO happened faster + * than the DMA, the data may not be available yet, so let's + * wait until it arrives. + */ + if ((entry->ring_allsc & RING_ANY_VALID) == 0) { + /* Indicate the read is aborted so we don't disable + * the interrupt thinking that the consumer is + * congested. + */ + port->ip_flags |= READ_ABORTED; + len = 0; + break; + } + + /* Load the bytes/status out of the ring entry */ + for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) { + sc = &(entry->ring_sc[byte_num]); + + /* Check for change in modem state or overrun */ + if ((*sc & IOC4_RXSB_MODEM_VALID) + && (port->ip_notify & N_DDCD)) { + /* Notify upper layer if DCD dropped */ + + if ((port->ip_flags & DCD_ON) + && !(*sc & IOC4_RXSB_DCD)) { + + /* If we have already copied some data, + * return it. We'll pick up the carrier + * drop on the next pass. That way we + * don't throw away the data that has + * already been copied back to + * the caller's buffer. + */ + if (total > 0) { + len = 0; + break; + } + port->ip_flags &= ~DCD_ON; + + /* Turn off this notification so the + * carrier drop protocol won't see it + * again when it does a read. + */ + *sc &= ~IOC4_RXSB_MODEM_VALID; + + /* To keep things consistent, we need + * to update the consumer pointer so + * the next reader won't come in and + * try to read the same ring entries + * again. This must be done here before + * the dcd change. + */ + + if ((entry->ring_allsc & RING_ANY_VALID) + == 0) { + cons_ptr += (int)sizeof + (struct ring_entry); + cons_ptr &= PROD_CONS_MASK; + } + writel(cons_ptr, + &port->ip_serial_regs->srcir); + port->ip_rx_cons = cons_ptr; + + /* Notify upper layer of carrier drop */ + if ((port->ip_notify & N_DDCD) + && port->ip_port) { + the_port->icount.dcd = 0; + wake_up_interruptible + (&the_port->info-> + delta_msr_wait); + } + + /* If we had any data to return, we + * would have returned it above. + */ + return 0; + } + } + if (*sc & IOC4_RXSB_MODEM_VALID) { + /* Notify that an input overrun occurred */ + if ((*sc & IOC4_RXSB_OVERRUN) + && (port->ip_notify & N_OVERRUN_ERROR)) { + ioc4_cb_post_ncs(the_port, NCS_OVERRUN); + } + /* Don't look at this byte again */ + *sc &= ~IOC4_RXSB_MODEM_VALID; + } + + /* Check for valid data or RX errors */ + if ((*sc & IOC4_RXSB_DATA_VALID) && + ((*sc & (IOC4_RXSB_PAR_ERR + | IOC4_RXSB_FRAME_ERR + | IOC4_RXSB_BREAK)) + && (port->ip_notify & (N_PARITY_ERROR + | N_FRAMING_ERROR + | N_BREAK)))) { + /* There is an error condition on the next byte. + * If we have already transferred some bytes, + * we'll stop here. Otherwise if this is the + * first byte to be read, we'll just transfer + * it alone after notifying the + * upper layer of its status. + */ + if (total > 0) { + len = 0; + break; + } else { + if ((*sc & IOC4_RXSB_PAR_ERR) && + (port->ip_notify & N_PARITY_ERROR)) { + ioc4_cb_post_ncs(the_port, + NCS_PARITY); + } + if ((*sc & IOC4_RXSB_FRAME_ERR) && + (port->ip_notify & N_FRAMING_ERROR)){ + ioc4_cb_post_ncs(the_port, + NCS_FRAMING); + } + if ((*sc & IOC4_RXSB_BREAK) + && (port->ip_notify & N_BREAK)) { + ioc4_cb_post_ncs + (the_port, + NCS_BREAK); + } + len = 1; + } + } + if (*sc & IOC4_RXSB_DATA_VALID) { + *sc &= ~IOC4_RXSB_DATA_VALID; + *buf = entry->ring_data[byte_num]; + buf++; + len--; + total++; + } + } + + /* If we used up this entry entirely, go on to the next one, + * otherwise we must have run out of buffer space, so + * leave the consumer pointer here for the next read in case + * there are still unread bytes in this entry. + */ + if ((entry->ring_allsc & RING_ANY_VALID) == 0) { + cons_ptr += (int)sizeof(struct ring_entry); + cons_ptr &= PROD_CONS_MASK; + } + } + + /* Update consumer pointer and re-arm rx timer interrupt */ + writel(cons_ptr, &port->ip_serial_regs->srcir); + port->ip_rx_cons = cons_ptr; + + /* If we have now dipped below the rx high water mark and we have + * rx_high interrupt turned off, we can now turn it back on again. + */ + if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr) + & PROD_CONS_MASK) < ((port->ip_sscr & + IOC4_SSCR_RX_THRESHOLD) + << IOC4_PROD_CONS_PTR_OFF))) { + port->ip_flags &= ~INPUT_HIGH; + enable_intrs(port, hooks->intr_rx_high); + } + return total; +} +/** + * receive_chars - upper level read. Called with ip_lock. + * @the_port: port to read from + */ +static void receive_chars(struct uart_port *the_port) +{ + struct tty_struct *tty; + unsigned char ch[IOC4_MAX_CHARS]; + int read_count, request_count; + struct uart_icount *icount; + struct uart_info *info = the_port->info; + + /* Make sure all the pointers are "good" ones */ + if (!info) + return; + if (!info->tty) + return; + + tty = info->tty; + + request_count = TTY_FLIPBUF_SIZE - tty->flip.count - 1; + + if (request_count > 0) { + if (request_count > IOC4_MAX_CHARS - 2) + request_count = IOC4_MAX_CHARS - 2; + icount = &the_port->icount; + read_count = do_read(the_port, ch, request_count); + if (read_count > 0) { + memcpy(tty->flip.char_buf_ptr, ch, read_count); + memset(tty->flip.flag_buf_ptr, TTY_NORMAL, read_count); + tty->flip.char_buf_ptr += read_count; + tty->flip.flag_buf_ptr += read_count; + tty->flip.count += read_count; + icount->rx += read_count; + } + } + tty_flip_buffer_push(tty); +} + +/** + * ic4_type - What type of console are we? + * @port: Port to operate with (we ignore since we only have one port) + * + */ +static const char *ic4_type(struct uart_port *the_port) +{ + return "SGI IOC4 Serial"; +} + +/** + * ic4_tx_empty - Is the transmitter empty? We pretend we're always empty + * @port: Port to operate on (we ignore since we always return 1) + * + */ +static unsigned int ic4_tx_empty(struct uart_port *the_port) +{ + return 1; +} + +/** + * ic4_stop_tx - stop the transmitter + * @port: Port to operate on + * @tty_stop: Set to 1 if called via uart_stop + * + */ +static void ic4_stop_tx(struct uart_port *the_port, unsigned int tty_stop) +{ +} + +/** + * null_void_function - + * @port: Port to operate on + * + */ +static void null_void_function(struct uart_port *the_port) +{ +} + +/** + * ic4_shutdown - shut down the port - free irq and disable + * @port: Port to shut down + * + */ +static void ic4_shutdown(struct uart_port *the_port) +{ + unsigned long port_flags; + struct ioc4_port *port; + struct uart_info *info; + + port = get_ioc4_port(the_port); + if (!port) + return; + + info = the_port->info; + + if (!(info->flags & UIF_INITIALIZED)) + return; + + wake_up_interruptible(&info->delta_msr_wait); + + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + spin_lock_irqsave(&port->ip_lock, port_flags); + set_notification(port, N_ALL, 0); + info->flags &= ~UIF_INITIALIZED; + spin_unlock_irqrestore(&port->ip_lock, port_flags); +} + +/** + * ic4_set_mctrl - set control lines (dtr, rts, etc) + * @port: Port to operate on + * @mctrl: Lines to set/unset + * + */ +static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl) +{ + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + set_mcr(the_port, 1, mcr, IOC4_SHADOW_DTR); +} + +/** + * ic4_get_mctrl - get control line info + * @port: port to operate on + * + */ +static unsigned int ic4_get_mctrl(struct uart_port *the_port) +{ + struct ioc4_port *port = get_ioc4_port(the_port); + uint32_t shadow; + unsigned int ret = 0; + + if (!port) + return 0; + + shadow = readl(&port->ip_serial_regs->shadow); + if (shadow & IOC4_SHADOW_DCD) + ret |= TIOCM_CAR; + if (shadow & IOC4_SHADOW_DR) + ret |= TIOCM_DSR; + if (shadow & IOC4_SHADOW_CTS) + ret |= TIOCM_CTS; + return ret; +} + +/** + * ic4_start_tx - Start transmitter, flush any output + * @port: Port to operate on + * @tty_stop: Set to 1 if called via uart_start + * + */ +static void ic4_start_tx(struct uart_port *the_port, unsigned int tty_stop) +{ + struct ioc4_port *port = get_ioc4_port(the_port); + unsigned long flags; + + if (port) { + spin_lock_irqsave(&port->ip_lock, flags); + transmit_chars(the_port); + spin_unlock_irqrestore(&port->ip_lock, flags); + } +} + +/** + * ic4_break_ctl - handle breaks + * @port: Port to operate on + * @break_state: Break state + * + */ +static void ic4_break_ctl(struct uart_port *the_port, int break_state) +{ +} + +/** + * ic4_startup - Start up the serial port - always return 0 (We're always on) + * @port: Port to operate on + * + */ +static int ic4_startup(struct uart_port *the_port) +{ + int retval; + struct ioc4_port *port; + struct ioc4_control *control; + struct uart_info *info; + unsigned long port_flags; + + if (!the_port) { + return -ENODEV; + } + port = get_ioc4_port(the_port); + if (!port) { + return -ENODEV; + } + info = the_port->info; + + control = port->ip_control; + if (!control) { + return -ENODEV; + } + + /* Start up the serial port */ + spin_lock_irqsave(&port->ip_lock, port_flags); + retval = ic4_startup_local(the_port); + spin_unlock_irqrestore(&port->ip_lock, port_flags); + return retval; +} + +/** + * ic4_set_termios - set termios stuff + * @port: port to operate on + * @termios: New settings + * @termios: Old + * + */ +static void +ic4_set_termios(struct uart_port *the_port, + struct termios *termios, struct termios *old_termios) +{ + struct ioc4_port *port = get_ioc4_port(the_port); + unsigned long port_flags; + + spin_lock_irqsave(&port->ip_lock, port_flags); + ioc4_change_speed(the_port, termios, old_termios); + spin_unlock_irqrestore(&port->ip_lock, port_flags); +} + +/** + * ic4_request_port - allocate resources for port - no op.... + * @port: port to operate on + * + */ +static int ic4_request_port(struct uart_port *port) +{ + return 0; +} + +/* Associate the uart functions above - given to serial core */ + +static struct uart_ops ioc4_ops = { + .tx_empty = ic4_tx_empty, + .set_mctrl = ic4_set_mctrl, + .get_mctrl = ic4_get_mctrl, + .stop_tx = ic4_stop_tx, + .start_tx = ic4_start_tx, + .stop_rx = null_void_function, + .enable_ms = null_void_function, + .break_ctl = ic4_break_ctl, + .startup = ic4_startup, + .shutdown = ic4_shutdown, + .set_termios = ic4_set_termios, + .type = ic4_type, + .release_port = null_void_function, + .request_port = ic4_request_port, +}; + +/* + * Boot-time initialization code + */ + +static struct uart_driver ioc4_uart = { + .owner = THIS_MODULE, + .driver_name = "ioc4_serial", + .dev_name = DEVICE_NAME, + .major = DEVICE_MAJOR, + .minor = DEVICE_MINOR, + .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS, +}; + +/** + * ioc4_serial_core_attach - register with serial core + * This is done during pci probing + * @pdev: handle for this card + */ +static inline int +ioc4_serial_core_attach(struct pci_dev *pdev) +{ + struct ioc4_port *port; + struct uart_port *the_port; + struct ioc4_control *control = pci_get_drvdata(pdev); + int ii; + + DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n", + __FUNCTION__, pdev, (void *)control)); + + if (!control) + return -ENODEV; + + /* once around for each port on this card */ + for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) { + the_port = &control->ic_port[ii].icp_uart_port; + port = control->ic_port[ii].icp_port; + port->ip_port = the_port; + + DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p\n", + __FUNCTION__, (void *)the_port, + (void *)port)); + + spin_lock_init(&the_port->lock); + /* membase, iobase and mapbase just need to be non-0 */ + the_port->membase = (unsigned char __iomem *)1; + the_port->line = the_port->iobase = ii; + the_port->mapbase = 1; + the_port->type = PORT_16550A; + the_port->fifosize = IOC4_MAX_CHARS; + the_port->ops = &ioc4_ops; + the_port->irq = control->ic_irq; + the_port->dev = &pdev->dev; + if (uart_add_one_port(&ioc4_uart, the_port) < 0) { + printk(KERN_WARNING + "%s: unable to add port %d\n", + __FUNCTION__, the_port->line); + } else { + DPRINT_CONFIG( + ("IOC4 serial driver port %d irq = %d\n", + the_port->line, the_port->irq)); + } + /* all ports are rs232 for now */ + ioc4_set_proto(port, PROTO_RS232); + } + return 0; +} + +/** + * ioc4_serial_attach_one - register attach function + * called per card found from ioc4_serial_detect as part + * of module_init(). + * @pdev: handle for this card + * @pci_id: pci id for this card + */ +int +ioc4_serial_attach_one(struct pci_dev *pdev, const struct pci_device_id *pci_id) +{ + struct ioc4_mem __iomem *mem; + unsigned long tmp_addr, tmp_addr1; + struct ioc4_serial __iomem *serial; + struct ioc4_soft *soft; + struct ioc4_control *control; + int tmp, ret = 0; + + + DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, pdev, pci_id)); + + /* Map in the ioc4 memory */ + tmp_addr = pci_resource_start(pdev, 0); + if (!tmp_addr) { + printk(KERN_WARNING + "ioc4 (%p) : unable to get PIO mapping for " + "MEM space\n", (void *)pdev); + return -ENODEV; + } + if (!request_region(tmp_addr, sizeof(struct ioc4_mem), "sioc4_mem")) { + printk(KERN_ALERT + "ioc4 (%p): unable to get request region for " + "MEM space\n", (void *)pdev); + return -ENODEV; + } + mem = ioremap(tmp_addr, sizeof(struct ioc4_mem)); + if (!mem) { + printk(KERN_WARNING + "ioc4 (%p) : unable to remap ioc4 memory\n", + (void *)pdev); + ret = -ENODEV; + goto out1; + } + + /* request serial registers */ + tmp_addr1 = pci_resource_start(pdev, 0) + IOC4_SERIAL_OFFSET; + + if (!request_region(tmp_addr1, sizeof(struct ioc4_serial), + "sioc4_uart")) { + printk(KERN_WARNING + "ioc4 (%p): unable to get request region for " + "uart space\n", (void *)pdev); + ret = -ENODEV; + goto out1; + } + serial = ioremap(tmp_addr1, sizeof(struct ioc4_serial)); + if (!serial) { + printk(KERN_WARNING + "ioc4 (%p) : unable to remap ioc4 serial register\n", + (void *)pdev); + ret = -ENODEV; + goto out2; + } + DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n", + __FUNCTION__, (void *)mem, (void *)serial)); + + /* Get memory for the new card */ + control = kmalloc(sizeof(struct ioc4_control) * IOC4_NUM_SERIAL_PORTS, + GFP_KERNEL); + + if (!control) { + printk(KERN_WARNING "ioc4_attach_one" + ": unable to get memory for the IOC4\n"); + ret = -ENOMEM; + goto out2; + } + memset(control, 0, sizeof(struct ioc4_control)); + pci_set_drvdata(pdev, control); + + /* Allocate the soft structure */ + soft = kmalloc(sizeof(struct ioc4_soft), GFP_KERNEL); + if (!soft) { + printk(KERN_WARNING + "ioc4 (%p): unable to get memory for the soft struct\n", + (void *)pdev); + ret = -ENOMEM; + goto out3; + } + memset(soft, 0, sizeof(struct ioc4_soft)); + + spin_lock_init(&soft->is_ir_lock); + soft->is_ioc4_mem_addr = mem; + soft->is_ioc4_serial_addr = serial; + + /* Init the IOC4 */ + pci_read_config_dword(pdev, PCI_COMMAND, &tmp); + pci_write_config_dword(pdev, PCI_COMMAND, + tmp | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); + + writel(0xf << IOC4_SIO_CR_CMD_PULSE_SHIFT, &mem->sio_cr); + + /* Enable serial port mode select generic PIO pins as outputs */ + writel(IOC4_GPCR_UART0_MODESEL | IOC4_GPCR_UART1_MODESEL + | IOC4_GPCR_UART2_MODESEL | IOC4_GPCR_UART3_MODESEL, + &mem->gpcr_s); + + /* Clear and disable all interrupts */ + write_ireg(soft, ~0, IOC4_W_IEC, IOC4_SIO_INTR_TYPE); + writel(~0, &mem->sio_ir); + write_ireg(soft, ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR), + IOC4_W_IEC, IOC4_OTHER_INTR_TYPE); + writel(~(IOC4_OTHER_IR_ATA_MEMERR | IOC4_OTHER_IR_ATA_MEMERR), + &mem->other_ir); + control->ic_soft = soft; + if (!request_irq(pdev->irq, ioc4_intr, SA_SHIRQ, + "sgi-ioc4serial", (void *)soft)) { + control->ic_irq = pdev->irq; + } else { + printk(KERN_WARNING + "%s : request_irq fails for IRQ 0x%x\n ", + __FUNCTION__, pdev->irq); + } + if ((ret = ioc4_attach_local(pdev, control, soft, + soft->is_ioc4_mem_addr, + soft->is_ioc4_serial_addr))) + goto out4; + + /* register port with the serial core */ + + if ((ret = ioc4_serial_core_attach(pdev))) + goto out4; + + return ret; + + /* error exits that give back resources */ +out4: + kfree(soft); +out3: + kfree(control); +out2: + release_region(tmp_addr1, sizeof(struct ioc4_serial)); +out1: + release_region(tmp_addr, sizeof(struct ioc4_mem)); + + return ret; +} + + +/** + * ioc4_serial_remove_one - detach function + * + * @pdev: handle for this card + */ + +#if 0 +void ioc4_serial_remove_one(struct pci_dev *pdev) +{ + int ii; + struct ioc4_control *control; + struct uart_port *the_port; + struct ioc4_port *port; + struct ioc4_soft *soft; + + control = pci_get_drvdata(pdev); + + for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) { + the_port = &control->ic_port[ii].icp_uart_port; + if (the_port) { + uart_remove_one_port(&ioc4_uart, the_port); + } + port = control->ic_port[ii].icp_port; + if (!(ii & 1) && port) { + pci_free_consistent(port->ip_pdev, + TOTAL_RING_BUF_SIZE, + (void *)port->ip_cpu_ringbuf, + port->ip_dma_ringbuf); + kfree(port); + } + } + soft = control->ic_soft; + if (soft) { + free_irq(control->ic_irq, (void *)soft); + if (soft->is_ioc4_serial_addr) { + release_region((unsigned long) + soft->is_ioc4_serial_addr, + sizeof(struct ioc4_serial)); + } + kfree(soft); + } + kfree(control); + pci_set_drvdata(pdev, NULL); + uart_unregister_driver(&ioc4_uart); +} +#endif + +/** + * ioc4_serial_init - module init + */ +int ioc4_serial_init(void) +{ + int ret; + + /* register with serial core */ + if ((ret = uart_register_driver(&ioc4_uart)) < 0) { + printk(KERN_WARNING + "%s: Couldn't register IOC4 serial driver\n", + __FUNCTION__); + return ret; + } + return 0; +} + +MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) <pfg@sgi.com>"); +MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC4 Base-IO Card"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(ioc4_serial_init); +EXPORT_SYMBOL(ioc4_serial_attach_one); |