[SERIAL] Clean up and fix tty transmission start/stoping

The start_tx and stop_tx methods were passed a flag to indicate
whether the start/stop was from the tty start/stop callbacks, and
some drivers used this flag to decide whether to ask the UART to
immediately stop transmission (where the UART supports such a
feature.)

There are other cases when we wish this to occur - when CTS is
lowered, or if we change from soft to hard flow control and CTS
is inactive.  In these cases, this flag was false, and we would
allow the transmitter to drain before stopping.

There is really only one case where we want to let the transmitter
drain before disabling, and that's when we run out of characters
to send.

Hence, re-jig the start_tx and stop_tx methods to eliminate this
flag, and introduce new functions for the special "disable and
allow transmitter to drain" case.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 4 insertions, 4 deletions

diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 01a8726a3f97..8861bcf84adf 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -124,7 +124,7 @@ static void imx_timeout(unsigned long data)
 /*
  * interrupts disabled on entry
  */
-static void imx_stop_tx(struct uart_port *port, unsigned int tty_stop)
+static void imx_stop_tx(struct uart_port *port)
 {
 	struct imx_port *sport = (struct imx_port *)port;
 	UCR1((u32)sport->port.membase) &= ~UCR1_TXMPTYEN;
@@ -165,13 +165,13 @@ static inline void imx_transmit_buffer(struct imx_port *sport)
 	} while (!(UTS((u32)sport->port.membase) & UTS_TXFULL));
 
 	if (uart_circ_empty(xmit))
-		imx_stop_tx(&sport->port, 0);
+		imx_stop_tx(&sport->port);
 }
 
 /*
  * interrupts disabled on entry
  */
-static void imx_start_tx(struct uart_port *port, unsigned int tty_start)
+static void imx_start_tx(struct uart_port *port)
 {
 	struct imx_port *sport = (struct imx_port *)port;
 
@@ -196,7 +196,7 @@ static irqreturn_t imx_txint(int irq, void *dev_id, struct pt_regs *regs)
 	}
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
-		imx_stop_tx(&sport->port, 0);
+		imx_stop_tx(&sport->port);
 		goto out;
 	}