tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 129 deletions

diff --git a/drivers/serial/ifx6x60.h b/drivers/serial/ifx6x60.h
deleted file mode 100644
index deb7b8d977dc..000000000000
--- a/drivers/serial/ifx6x60.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/****************************************************************************
- *
- * Driver for the IFX spi modem.
- *
- * Copyright (C) 2009, 2010 Intel Corp
- * Jim Stanley <jim.stanley@intel.com>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
- * USA
- *
- *
- *
- *****************************************************************************/
-#ifndef _IFX6X60_H
-#define _IFX6X60_H
-
-#define DRVNAME				"ifx6x60"
-#define TTYNAME				"ttyIFX"
-
-/* #define IFX_THROTTLE_CODE */
-
-#define IFX_SPI_MAX_MINORS		1
-#define IFX_SPI_TRANSFER_SIZE		2048
-#define IFX_SPI_FIFO_SIZE		4096
-
-#define IFX_SPI_HEADER_OVERHEAD		4
-#define IFX_RESET_TIMEOUT		msecs_to_jiffies(50)
-
-/* device flags bitfield definitions */
-#define IFX_SPI_STATE_PRESENT		0
-#define IFX_SPI_STATE_IO_IN_PROGRESS	1
-#define IFX_SPI_STATE_IO_READY		2
-#define IFX_SPI_STATE_TIMER_PENDING	3
-
-/* flow control bitfields */
-#define IFX_SPI_DCD			0
-#define IFX_SPI_CTS			1
-#define IFX_SPI_DSR			2
-#define IFX_SPI_RI			3
-#define IFX_SPI_DTR			4
-#define IFX_SPI_RTS			5
-#define IFX_SPI_TX_FC			6
-#define IFX_SPI_RX_FC			7
-#define IFX_SPI_UPDATE			8
-
-#define IFX_SPI_PAYLOAD_SIZE		(IFX_SPI_TRANSFER_SIZE - \
-						IFX_SPI_HEADER_OVERHEAD)
-
-#define IFX_SPI_IRQ_TYPE		DETECT_EDGE_RISING
-#define IFX_SPI_GPIO_TARGET		0
-#define IFX_SPI_GPIO0			0x105
-
-#define IFX_SPI_STATUS_TIMEOUT		(2000*HZ)
-
-/* values for bits in power status byte */
-#define IFX_SPI_POWER_DATA_PENDING	1
-#define IFX_SPI_POWER_SRDY		2
-
-struct ifx_spi_device {
-	/* Our SPI device */
-	struct spi_device *spi_dev;
-
-	/* Port specific data */
-	struct kfifo tx_fifo;
-	spinlock_t fifo_lock;
-	unsigned long signal_state;
-
-	/* TTY Layer logic */
-	struct tty_port tty_port;
-	struct device *tty_dev;
-	int minor;
-
-	/* Low level I/O work */
-	struct tasklet_struct io_work_tasklet;
-	unsigned long flags;
-	dma_addr_t rx_dma;
-	dma_addr_t tx_dma;
-
-	int is_6160;				/* Modem type */
-
-	spinlock_t write_lock;
-	int write_pending;
-	spinlock_t power_lock;
-	unsigned char power_status;
-
-	unsigned char *rx_buffer;
-	unsigned char *tx_buffer;
-	dma_addr_t rx_bus;
-	dma_addr_t tx_bus;
-	unsigned char spi_more;
-	unsigned char spi_slave_cts;
-
-	struct timer_list spi_timer;
-
-	struct spi_message spi_msg;
-	struct spi_transfer spi_xfer;
-
-	struct {
-		/* gpio lines */
-		unsigned short srdy;		/* slave-ready gpio */
-		unsigned short mrdy;		/* master-ready gpio */
-		unsigned short reset;		/* modem-reset gpio */
-		unsigned short po;		/* modem-on gpio */
-		unsigned short reset_out;	/* modem-in-reset gpio */
-		/* state/stats */
-		int unack_srdy_int_nb;
-	} gpio;
-
-	/* modem reset */
-	unsigned long mdm_reset_state;
-#define MR_START	0
-#define MR_INPROGRESS	1
-#define MR_COMPLETE	2
-	wait_queue_head_t mdm_reset_wait;
-};
-
-#endif /* _IFX6X60_H */