scsi: ufs: Change HCI macro to actual bit position

Currently UFS HCI uses UFS_BIT() macro to get various bit position for
the hardware registers status bits. Which makes code longer instead of
shorter. This macro does not improve code readability as well.  Lets
re-write these macro definition with the actual bit position.

Suggested-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 35 insertions, 31 deletions

diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index f60145d4a66e..0d78ed36e80c 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -121,20 +121,23 @@ enum {
 
 #define UFS_BIT(x)	(1L << (x))
 
-#define UTP_TRANSFER_REQ_COMPL			UFS_BIT(0)
-#define UIC_DME_END_PT_RESET			UFS_BIT(1)
-#define UIC_ERROR				UFS_BIT(2)
-#define UIC_TEST_MODE				UFS_BIT(3)
-#define UIC_POWER_MODE				UFS_BIT(4)
-#define UIC_HIBERNATE_EXIT			UFS_BIT(5)
-#define UIC_HIBERNATE_ENTER			UFS_BIT(6)
-#define UIC_LINK_LOST				UFS_BIT(7)
-#define UIC_LINK_STARTUP			UFS_BIT(8)
-#define UTP_TASK_REQ_COMPL			UFS_BIT(9)
-#define UIC_COMMAND_COMPL			UFS_BIT(10)
-#define DEVICE_FATAL_ERROR			UFS_BIT(11)
-#define CONTROLLER_FATAL_ERROR			UFS_BIT(16)
-#define SYSTEM_BUS_FATAL_ERROR			UFS_BIT(17)
+/*
+ * IS - Interrupt Status - 20h
+ */
+#define UTP_TRANSFER_REQ_COMPL			0x1
+#define UIC_DME_END_PT_RESET			0x2
+#define UIC_ERROR				0x4
+#define UIC_TEST_MODE				0x8
+#define UIC_POWER_MODE				0x10
+#define UIC_HIBERNATE_EXIT			0x20
+#define UIC_HIBERNATE_ENTER			0x40
+#define UIC_LINK_LOST				0x80
+#define UIC_LINK_STARTUP			0x100
+#define UTP_TASK_REQ_COMPL			0x200
+#define UIC_COMMAND_COMPL			0x400
+#define DEVICE_FATAL_ERROR			0x800
+#define CONTROLLER_FATAL_ERROR			0x10000
+#define SYSTEM_BUS_FATAL_ERROR			0x20000
 
 #define UFSHCD_UIC_PWR_MASK	(UIC_HIBERNATE_ENTER |\
 				UIC_HIBERNATE_EXIT |\
@@ -152,10 +155,10 @@ enum {
 				SYSTEM_BUS_FATAL_ERROR)
 
 /* HCS - Host Controller Status 30h */
-#define DEVICE_PRESENT				UFS_BIT(0)
-#define UTP_TRANSFER_REQ_LIST_READY		UFS_BIT(1)
-#define UTP_TASK_REQ_LIST_READY			UFS_BIT(2)
-#define UIC_COMMAND_READY			UFS_BIT(3)
+#define DEVICE_PRESENT				0x1
+#define UTP_TRANSFER_REQ_LIST_READY		0x2
+#define UTP_TASK_REQ_LIST_READY			0x4
+#define UIC_COMMAND_READY			0x8
 #define HOST_ERROR_INDICATOR			UFS_BIT(4)
 #define DEVICE_ERROR_INDICATOR			UFS_BIT(5)
 #define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK	UFS_MASK(0x7, 8)
@@ -174,46 +177,47 @@ enum {
 };
 
 /* HCE - Host Controller Enable 34h */
-#define CONTROLLER_ENABLE	UFS_BIT(0)
+#define CONTROLLER_ENABLE	0x1
 #define CONTROLLER_DISABLE	0x0
-#define CRYPTO_GENERAL_ENABLE	UFS_BIT(1)
+#define CRYPTO_GENERAL_ENABLE	0x2
 
 /* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
-#define UIC_PHY_ADAPTER_LAYER_ERROR			UFS_BIT(31)
+#define UIC_PHY_ADAPTER_LAYER_ERROR			0x80000000
 #define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK		0x1F
 #define UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK		0xF
 
 /* UECDL - Host UIC Error Code Data Link Layer 3Ch */
-#define UIC_DATA_LINK_LAYER_ERROR		UFS_BIT(31)
+#define UIC_DATA_LINK_LAYER_ERROR		0x80000000
 #define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK	0x7FFF
 #define UIC_DATA_LINK_LAYER_ERROR_PA_INIT	0x2000
 #define UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED	0x0001
 #define UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT 0x0002
 
 /* UECN - Host UIC Error Code Network Layer 40h */
-#define UIC_NETWORK_LAYER_ERROR			UFS_BIT(31)
+#define UIC_NETWORK_LAYER_ERROR			0x80000000
 #define UIC_NETWORK_LAYER_ERROR_CODE_MASK	0x7
 
 /* UECT - Host UIC Error Code Transport Layer 44h */
-#define UIC_TRANSPORT_LAYER_ERROR		UFS_BIT(31)
+#define UIC_TRANSPORT_LAYER_ERROR		0x80000000
 #define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK	0x7F
 
 /* UECDME - Host UIC Error Code DME 48h */
-#define UIC_DME_ERROR			UFS_BIT(31)
+#define UIC_DME_ERROR			0x80000000
 #define UIC_DME_ERROR_CODE_MASK		0x1
 
+/* UTRIACR - Interrupt Aggregation control register - 0x4Ch */
 #define INT_AGGR_TIMEOUT_VAL_MASK		0xFF
 #define INT_AGGR_COUNTER_THRESHOLD_MASK		UFS_MASK(0x1F, 8)
-#define INT_AGGR_COUNTER_AND_TIMER_RESET	UFS_BIT(16)
-#define INT_AGGR_STATUS_BIT			UFS_BIT(20)
-#define INT_AGGR_PARAM_WRITE			UFS_BIT(24)
-#define INT_AGGR_ENABLE				UFS_BIT(31)
+#define INT_AGGR_COUNTER_AND_TIMER_RESET	0x10000
+#define INT_AGGR_STATUS_BIT			0x100000
+#define INT_AGGR_PARAM_WRITE			0x1000000
+#define INT_AGGR_ENABLE				0x80000000
 
 /* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
-#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT	UFS_BIT(0)
+#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT	0x1
 
 /* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
-#define UTP_TASK_REQ_LIST_RUN_STOP_BIT		UFS_BIT(0)
+#define UTP_TASK_REQ_LIST_RUN_STOP_BIT		0x1
 
 /* UICCMD - UIC Command */
 #define COMMAND_OPCODE_MASK		0xFF