Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).

  The major update (which causes a conflict with block, see below) is
  Christoph removing the queue limits and their associated block
  helpers.

  The remaining patches are assorted minor fixes and deprecated function
  updates plus a bit of constification"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
  scsi: mpi3mr: Sanitise num_phys
  scsi: lpfc: Copyright updates for 14.4.0.2 patches
  scsi: lpfc: Update lpfc version to 14.4.0.2
  scsi: lpfc: Add support for 32 byte CDBs
  scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
  scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
  scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
  scsi: lpfc: Update logging of protection type for T10 DIF I/O
  scsi: lpfc: Change default logging level for unsolicited CT MIB commands
  scsi: target: Remove unused list 'device_list'
  scsi: iscsi: Remove unused list 'connlist_err'
  scsi: ufs: exynos: Add support for Tensor gs101 SoC
  scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
  scsi: ufs: exynos: Allow max frequencies up to 267Mhz
  scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
  scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
  scsi: ufs: dt-bindings: exynos: Add gs101 compatible
  scsi: qla2xxx: Fix debugfs output for fw_resource_count
  scsi: qedf: Ensure the copied buf is NUL terminated
  scsi: bfa: Ensure the copied buf is NUL terminated
  ...

3 files changed, 26 insertions, 27 deletions

diff --git a/drivers/scsi/qla2xxx/Kconfig b/drivers/scsi/qla2xxx/Kconfig
index a584708d3056..a8b4314bfd6e 100644
--- a/drivers/scsi/qla2xxx/Kconfig
+++ b/drivers/scsi/qla2xxx/Kconfig
@@ -7,29 +7,29 @@ config SCSI_QLA_FC
 	select FW_LOADER
 	select BTREE
 	help
-	This qla2xxx driver supports all QLogic Fibre Channel
-	PCI and PCIe host adapters.
+	  This qla2xxx driver supports all QLogic Fibre Channel
+	  PCI and PCIe host adapters.
 
-	By default, firmware for the ISP parts will be loaded
-	via the Firmware Loader interface.
+	  By default, firmware for the ISP parts will be loaded
+	  via the Firmware Loader interface.
 
-	ISP               Firmware Filename
-	----------        -----------------
-	21xx              ql2100_fw.bin
-	22xx              ql2200_fw.bin
-	2300, 2312, 6312  ql2300_fw.bin
-	2322, 6322        ql2322_fw.bin
-	24xx, 54xx        ql2400_fw.bin
-	25xx              ql2500_fw.bin
+	  ISP               Firmware Filename
+	  ----------        -----------------
+	  21xx              ql2100_fw.bin
+	  22xx              ql2200_fw.bin
+	  2300, 2312, 6312  ql2300_fw.bin
+	  2322, 6322        ql2322_fw.bin
+	  24xx, 54xx        ql2400_fw.bin
+	  25xx              ql2500_fw.bin
 
-	Upon request, the driver caches the firmware image until
-	the driver is unloaded.
+	  Upon request, the driver caches the firmware image until
+	  the driver is unloaded.
 
-	Firmware images can be retrieved from:
+	  Firmware images can be retrieved from:
 
-		http://ldriver.qlogic.com/firmware/
+	        http://ldriver.qlogic.com/firmware/
 
-	They are also included in the linux-firmware tree as well.
+	  They are also included in the linux-firmware tree as well.
 
 config TCM_QLA2XXX
 	tristate "TCM_QLA2XXX fabric module for QLogic 24xx+ series target mode HBAs"
@@ -38,13 +38,15 @@ config TCM_QLA2XXX
 	select BTREE
 	default n
 	help
-	Say Y here to enable the TCM_QLA2XXX fabric module for QLogic 24xx+ series target mode HBAs
+	  Say Y here to enable the TCM_QLA2XXX fabric module for QLogic 24xx+
+	  series target mode HBAs.
 
 if TCM_QLA2XXX
 config TCM_QLA2XXX_DEBUG
 	bool "TCM_QLA2XXX fabric module DEBUG mode for QLogic 24xx+ series target mode HBAs"
 	default n
 	help
-	Say Y here to enable the TCM_QLA2XXX fabric module DEBUG for QLogic 24xx+ series target mode HBAs
-	This will include code to enable the SCSI command jammer
+	  Say Y here to enable the TCM_QLA2XXX fabric module DEBUG for
+	  QLogic 24xx+ series target mode HBAs.
+	  This will include code to enable the SCSI command jammer.
 endif
diff --git a/drivers/scsi/qla2xxx/qla_dfs.c b/drivers/scsi/qla2xxx/qla_dfs.c
index 55ff3d7482b3..a1545dad0c0c 100644
--- a/drivers/scsi/qla2xxx/qla_dfs.c
+++ b/drivers/scsi/qla2xxx/qla_dfs.c
@@ -274,7 +274,7 @@ qla_dfs_fw_resource_cnt_show(struct seq_file *s, void *unused)
 		seq_printf(s, "Driver: estimate iocb used [%d] high water limit [%d]\n",
 			   iocbs_used, ha->base_qpair->fwres.iocbs_limit);
 
-		seq_printf(s, "estimate exchange used[%d] high water limit [%d] n",
+		seq_printf(s, "estimate exchange used[%d] high water limit [%d]\n",
 			   exch_used, ha->base_qpair->fwres.exch_limit);
 
 		if (ql2xenforce_iocb_limit == 2) {
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 1e2f52210f60..fcb06df2ce4e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1957,9 +1957,6 @@ qla2xxx_slave_configure(struct scsi_device *sdev)
 	scsi_qla_host_t *vha = shost_priv(sdev->host);
 	struct req_que *req = vha->req;
 
-	if (IS_T10_PI_CAPABLE(vha->hw))
-		blk_queue_update_dma_alignment(sdev->request_queue, 0x7);
-
 	scsi_change_queue_depth(sdev, req->max_q_depth);
 	return 0;
 }
@@ -3575,6 +3572,9 @@ skip_dpc:
 		    QLA_SG_ALL : 128;
 	}
 
+	if (IS_T10_PI_CAPABLE(base_vha->hw))
+		host->dma_alignment = 0x7;
+
 	ret = scsi_add_host(host, &pdev->dev);
 	if (ret)
 		goto probe_failed;
@@ -8156,9 +8156,6 @@ MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
 
 static struct pci_driver qla2xxx_pci_driver = {
 	.name		= QLA2XXX_DRIVER_NAME,
-	.driver		= {
-		.owner		= THIS_MODULE,
-	},
 	.id_table	= qla2xxx_pci_tbl,
 	.probe		= qla2x00_probe_one,
 	.remove		= qla2x00_remove_one,