diff options
author | Andrew Vasquez <andrew.vasquez@qlogic.com> | 2005-07-06 21:32:07 +0400 |
---|---|---|
committer | James Bottomley <jejb@mulgrave.(none)> | 2005-07-14 19:03:15 +0400 |
commit | fa2a1ce53d4b869b74da9a770770c79f9af64914 (patch) | |
tree | da350e79117d3177f51c2788c51aeba425afd4ca /drivers/scsi/qla2xxx | |
parent | ba5140b48e35aa4e4b57eb6db5cface63d7bd712 (diff) | |
download | linux-fa2a1ce53d4b869b74da9a770770c79f9af64914.tar.xz |
[SCSI] qla2xxx: Code scrubbing.
Code scrubbing.
- Remove trailing whitespace from driver files.
- Remove unused #defines and inlines.
- Standardize on C comments (// -> /* */)
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi/qla2xxx')
-rw-r--r-- | drivers/scsi/qla2xxx/qla_dbg.c | 130 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_def.h | 42 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_fw.h | 3 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_gs.c | 6 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_init.c | 56 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_inline.h | 86 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_iocb.c | 4 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_isr.c | 21 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_mbx.c | 12 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_os.c | 78 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_rscn.c | 30 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_settings.h | 25 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_sup.c | 10 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_version.h | 2 |
14 files changed, 199 insertions, 306 deletions
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 80dcc2bac6d6..d5107aa15c1e 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -74,7 +74,7 @@ qla2300_fw_dump(scsi_qla_host_t *ha, int hardware_locked) fw->hccr = RD_REG_WORD(®->hccr); /* Pause RISC. */ - WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); + WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); if (IS_QLA2300(ha)) { for (cnt = 30000; (RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) == 0 && @@ -91,85 +91,85 @@ qla2300_fw_dump(scsi_qla_host_t *ha, int hardware_locked) if (rval == QLA_SUCCESS) { dmp_reg = (uint16_t __iomem *)(reg + 0); - for (cnt = 0; cnt < sizeof(fw->pbiu_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->pbiu_reg) / 2; cnt++) fw->pbiu_reg[cnt] = RD_REG_WORD(dmp_reg++); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x10); - for (cnt = 0; cnt < sizeof(fw->risc_host_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_host_reg) / 2; cnt++) fw->risc_host_reg[cnt] = RD_REG_WORD(dmp_reg++); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x40); - for (cnt = 0; cnt < sizeof(fw->mailbox_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->mailbox_reg) / 2; cnt++) fw->mailbox_reg[cnt] = RD_REG_WORD(dmp_reg++); WRT_REG_WORD(®->ctrl_status, 0x40); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->resp_dma_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->resp_dma_reg) / 2; cnt++) fw->resp_dma_reg[cnt] = RD_REG_WORD(dmp_reg++); WRT_REG_WORD(®->ctrl_status, 0x50); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->dma_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->dma_reg) / 2; cnt++) fw->dma_reg[cnt] = RD_REG_WORD(dmp_reg++); WRT_REG_WORD(®->ctrl_status, 0x00); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0xA0); - for (cnt = 0; cnt < sizeof(fw->risc_hdw_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_hdw_reg) / 2; cnt++) fw->risc_hdw_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->pcr, 0x2000); + WRT_REG_WORD(®->pcr, 0x2000); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->risc_gp0_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_gp0_reg) / 2; cnt++) fw->risc_gp0_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->pcr, 0x2200); + WRT_REG_WORD(®->pcr, 0x2200); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->risc_gp1_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_gp1_reg) / 2; cnt++) fw->risc_gp1_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->pcr, 0x2400); + WRT_REG_WORD(®->pcr, 0x2400); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->risc_gp2_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_gp2_reg) / 2; cnt++) fw->risc_gp2_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->pcr, 0x2600); + WRT_REG_WORD(®->pcr, 0x2600); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->risc_gp3_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_gp3_reg) / 2; cnt++) fw->risc_gp3_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->pcr, 0x2800); + WRT_REG_WORD(®->pcr, 0x2800); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->risc_gp4_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_gp4_reg) / 2; cnt++) fw->risc_gp4_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->pcr, 0x2A00); + WRT_REG_WORD(®->pcr, 0x2A00); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->risc_gp5_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_gp5_reg) / 2; cnt++) fw->risc_gp5_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->pcr, 0x2C00); + WRT_REG_WORD(®->pcr, 0x2C00); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->risc_gp6_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_gp6_reg) / 2; cnt++) fw->risc_gp6_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->pcr, 0x2E00); + WRT_REG_WORD(®->pcr, 0x2E00); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->risc_gp7_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_gp7_reg) / 2; cnt++) fw->risc_gp7_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->ctrl_status, 0x10); + WRT_REG_WORD(®->ctrl_status, 0x10); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->frame_buf_hdw_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->frame_buf_hdw_reg) / 2; cnt++) fw->frame_buf_hdw_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->ctrl_status, 0x20); + WRT_REG_WORD(®->ctrl_status, 0x20); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->fpm_b0_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->fpm_b0_reg) / 2; cnt++) fw->fpm_b0_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->ctrl_status, 0x30); + WRT_REG_WORD(®->ctrl_status, 0x30); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->fpm_b1_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->fpm_b1_reg) / 2; cnt++) fw->fpm_b1_reg[cnt] = RD_REG_WORD(dmp_reg++); /* Reset RISC. */ @@ -622,7 +622,7 @@ qla2100_fw_dump(scsi_qla_host_t *ha, int hardware_locked) fw->hccr = RD_REG_WORD(®->hccr); /* Pause RISC. */ - WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); + WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); for (cnt = 30000; (RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) == 0 && rval == QLA_SUCCESS; cnt--) { if (cnt) @@ -632,7 +632,7 @@ qla2100_fw_dump(scsi_qla_host_t *ha, int hardware_locked) } if (rval == QLA_SUCCESS) { dmp_reg = (uint16_t __iomem *)(reg + 0); - for (cnt = 0; cnt < sizeof(fw->pbiu_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->pbiu_reg) / 2; cnt++) fw->pbiu_reg[cnt] = RD_REG_WORD(dmp_reg++); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x10); @@ -644,67 +644,67 @@ qla2100_fw_dump(scsi_qla_host_t *ha, int hardware_locked) } dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x20); - for (cnt = 0; cnt < sizeof(fw->dma_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->dma_reg) / 2; cnt++) fw->dma_reg[cnt] = RD_REG_WORD(dmp_reg++); WRT_REG_WORD(®->ctrl_status, 0x00); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0xA0); - for (cnt = 0; cnt < sizeof(fw->risc_hdw_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_hdw_reg) / 2; cnt++) fw->risc_hdw_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->pcr, 0x2000); + WRT_REG_WORD(®->pcr, 0x2000); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->risc_gp0_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_gp0_reg) / 2; cnt++) fw->risc_gp0_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->pcr, 0x2100); + WRT_REG_WORD(®->pcr, 0x2100); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->risc_gp1_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_gp1_reg) / 2; cnt++) fw->risc_gp1_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->pcr, 0x2200); + WRT_REG_WORD(®->pcr, 0x2200); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->risc_gp2_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_gp2_reg) / 2; cnt++) fw->risc_gp2_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->pcr, 0x2300); + WRT_REG_WORD(®->pcr, 0x2300); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->risc_gp3_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_gp3_reg) / 2; cnt++) fw->risc_gp3_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->pcr, 0x2400); + WRT_REG_WORD(®->pcr, 0x2400); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->risc_gp4_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_gp4_reg) / 2; cnt++) fw->risc_gp4_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->pcr, 0x2500); + WRT_REG_WORD(®->pcr, 0x2500); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->risc_gp5_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_gp5_reg) / 2; cnt++) fw->risc_gp5_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->pcr, 0x2600); + WRT_REG_WORD(®->pcr, 0x2600); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->risc_gp6_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_gp6_reg) / 2; cnt++) fw->risc_gp6_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->pcr, 0x2700); + WRT_REG_WORD(®->pcr, 0x2700); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->risc_gp7_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->risc_gp7_reg) / 2; cnt++) fw->risc_gp7_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->ctrl_status, 0x10); + WRT_REG_WORD(®->ctrl_status, 0x10); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->frame_buf_hdw_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->frame_buf_hdw_reg) / 2; cnt++) fw->frame_buf_hdw_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->ctrl_status, 0x20); + WRT_REG_WORD(®->ctrl_status, 0x20); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->fpm_b0_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->fpm_b0_reg) / 2; cnt++) fw->fpm_b0_reg[cnt] = RD_REG_WORD(dmp_reg++); - WRT_REG_WORD(®->ctrl_status, 0x30); + WRT_REG_WORD(®->ctrl_status, 0x30); dmp_reg = (uint16_t __iomem *)((uint8_t __iomem *)reg + 0x80); - for (cnt = 0; cnt < sizeof(fw->fpm_b1_reg) / 2; cnt++) + for (cnt = 0; cnt < sizeof(fw->fpm_b1_reg) / 2; cnt++) fw->fpm_b1_reg[cnt] = RD_REG_WORD(dmp_reg++); /* Reset the ISP. */ @@ -723,7 +723,7 @@ qla2100_fw_dump(scsi_qla_host_t *ha, int hardware_locked) if (rval == QLA_SUCCESS && (IS_QLA2200(ha) || (IS_QLA2100(ha) && (RD_REG_WORD(®->mctr) & (BIT_1 | BIT_0)) != 0))) { - WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); + WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC); for (cnt = 30000; (RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) == 0 && rval == QLA_SUCCESS; cnt--) { @@ -964,7 +964,7 @@ qla_uprintf(char **uiter, char *fmt, ...) int iter, len; char buf[128]; va_list args; - + va_start(args, fmt); len = vsprintf(buf, fmt, args); va_end(args); @@ -1913,8 +1913,8 @@ qla24xx_ascii_fw_dump(scsi_qla_host_t *ha) /* Driver Debug Functions. */ /****************************************************************************/ -void -qla2x00_dump_regs(scsi_qla_host_t *ha) +void +qla2x00_dump_regs(scsi_qla_host_t *ha) { struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; @@ -1935,7 +1935,7 @@ qla2x00_dump_regs(scsi_qla_host_t *ha) void -qla2x00_dump_buffer(uint8_t * b, uint32_t size) +qla2x00_dump_buffer(uint8_t * b, uint32_t size) { uint32_t cnt; uint8_t c; @@ -1961,11 +1961,11 @@ qla2x00_dump_buffer(uint8_t * b, uint32_t size) /************************************************************************** * qla2x00_print_scsi_cmd * Dumps out info about the scsi cmd and srb. - * Input + * Input * cmd : struct scsi_cmnd **************************************************************************/ void -qla2x00_print_scsi_cmd(struct scsi_cmnd * cmd) +qla2x00_print_scsi_cmd(struct scsi_cmnd * cmd) { int i; struct scsi_qla_host *ha; @@ -1988,7 +1988,7 @@ qla2x00_print_scsi_cmd(struct scsi_cmnd * cmd) cmd->request_buffer, cmd->request_bufflen); printk(" tag=%d, transfersize=0x%x\n", cmd->tag, cmd->transfersize); - printk(" serial_number=%lx, SP=%p\n", cmd->serial_number, sp); + printk(" serial_number=%lx, SP=%p\n", cmd->serial_number, sp); printk(" data direction=%d\n", cmd->sc_data_direction); if (!sp) @@ -2025,8 +2025,8 @@ qla2x00_dump_pkt(void *pkt) * count = number of words. */ void -qla2x00_formatted_dump_buffer(char *string, uint8_t * buffer, - uint8_t wd_size, uint32_t count) +qla2x00_formatted_dump_buffer(char *string, uint8_t * buffer, + uint8_t wd_size, uint32_t count) { uint32_t cnt; uint16_t *buf16; diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 7c1618019c42..bd87d5f1ffbb 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -116,7 +116,7 @@ #include "qla_settings.h" -/* +/* * Data bit definitions */ #define BIT_0 0x1 @@ -194,8 +194,8 @@ #define MAX_TARGETS MAX_FIBRE_DEVICES #define MIN_LUNS 8 #define MAX_LUNS MAX_FIBRE_LUNS -#define MAX_CMDS_PER_LUN 255 - +#define MAX_CMDS_PER_LUN 255 + /* * Fibre Channel device definitions. */ @@ -243,7 +243,7 @@ #define RESPONSE_ENTRY_CNT_2300 512 /* Number of response entries.*/ /* - * SCSI Request Block + * SCSI Request Block */ typedef struct srb { struct list_head list; @@ -254,7 +254,7 @@ typedef struct srb { struct scsi_cmnd *cmd; /* Linux SCSI command pkt */ struct timer_list timer; /* Command timer */ - atomic_t ref_count; /* Reference count for this structure */ + atomic_t ref_count; /* Reference count for this structure */ uint16_t flags; /* Request state */ @@ -312,7 +312,7 @@ struct device_reg_2xxx { uint16_t flash_data; /* Flash BIOS data */ uint16_t unused_1[1]; /* Gap */ uint16_t ctrl_status; /* Control/Status */ -#define CSR_FLASH_64K_BANK BIT_3 /* Flash upper 64K bank select */ +#define CSR_FLASH_64K_BANK BIT_3 /* Flash upper 64K bank select */ #define CSR_FLASH_ENABLE BIT_1 /* Flash BIOS Read/Write enable */ #define CSR_ISP_SOFT_RESET BIT_0 /* ISP soft reset */ @@ -355,12 +355,12 @@ struct device_reg_2xxx { uint16_t rsp_q_out; /* Out-Pointer */ /* RISC to Host Status */ - uint32_t host_status; + uint32_t host_status; #define HSR_RISC_INT BIT_15 /* RISC interrupt */ #define HSR_RISC_PAUSED BIT_8 /* RISC Paused */ /* Host to Host Semaphore */ - uint16_t host_semaphore; + uint16_t host_semaphore; uint16_t unused_3[17]; /* Gap */ uint16_t mailbox0; uint16_t mailbox1; @@ -1057,7 +1057,7 @@ typedef struct { * LSB BIT 5 = Rx Sensitivity 1G bit 1 * LSB BIT 6 = Rx Sensitivity 1G bit 2 * LSB BIT 7 = Rx Sensitivity 1G bit 3 - * + * * MSB BIT 0 = Tx Sensitivity 2G bit 0 * MSB BIT 1 = Tx Sensitivity 2G bit 1 * MSB BIT 2 = Tx Sensitivity 2G bit 2 @@ -1075,7 +1075,7 @@ typedef struct { * LSB BIT 5 = Output Swing 2G bit 0 * LSB BIT 6 = Output Swing 2G bit 1 * LSB BIT 7 = Output Swing 2G bit 2 - * + * * MSB BIT 0 = Output Emphasis 2G bit 0 * MSB BIT 1 = Output Emphasis 2G bit 1 * MSB BIT 2 = Output Enable @@ -1997,7 +1997,7 @@ struct qla_board_info { struct gid_list_info { uint8_t al_pa; uint8_t area; - uint8_t domain; + uint8_t domain; uint8_t loop_id_2100; /* ISP2100/ISP2200 -- 4 bytes. */ uint16_t loop_id; /* ISP23XX -- 6 bytes. */ uint16_t reserved_1; /* ISP24XX -- 8 bytes. */ @@ -2111,7 +2111,7 @@ typedef struct scsi_qla_host { #define ISP_ABORT_RETRY 20 /* ISP aborted. */ #define FCPORT_RESCAN_NEEDED 21 /* IO descriptor processing needed */ #define IODESC_PROCESS_NEEDED 22 /* IO descriptor processing needed */ -#define IOCTL_ERROR_RECOVERY 23 +#define IOCTL_ERROR_RECOVERY 23 #define LOOP_RESET_NEEDED 24 #define BEACON_BLINK_NEEDED 25 @@ -2126,7 +2126,7 @@ typedef struct scsi_qla_host { #define SRB_MIN_REQ 128 mempool_t *srb_mempool; - /* This spinlock is used to protect "io transactions", you must + /* This spinlock is used to protect "io transactions", you must * aquire it before doing any IO to the card, eg with RD_REG*() and * WRT_REG*() for the duration of your entire commandtransaction. * @@ -2153,12 +2153,12 @@ typedef struct scsi_qla_host { response_t *response_ring_ptr; /* Current address. */ uint16_t rsp_ring_index; /* Current index. */ uint16_t response_q_length; - + struct isp_operations isp_ops; /* Outstandings ISP commands. */ srb_t *outstanding_cmds[MAX_OUTSTANDING_COMMANDS]; - uint32_t current_outstanding_cmd; + uint32_t current_outstanding_cmd; srb_t *status_srb; /* Status continuation entry. */ uint16_t revision; @@ -2187,7 +2187,7 @@ typedef struct scsi_qla_host { #define LOOP_P2P 2 #define P2P_LOOP 3 - uint8_t marker_needed; + uint8_t marker_needed; uint8_t interrupts_on; @@ -2208,7 +2208,7 @@ typedef struct scsi_qla_host { uint8_t mbx_count; uint16_t last_loop_id; - uint32_t login_retry_count; + uint32_t login_retry_count; /* Fibre Channel Device List. */ struct list_head fcports; @@ -2253,7 +2253,7 @@ typedef struct scsi_qla_host { dma_addr_t rlc_rsp_dma; rpt_lun_cmd_rsp_t *rlc_rsp; - /* Small DMA pool allocations -- maximum 256 bytes in length. */ + /* Small DMA pool allocations -- maximum 256 bytes in length. */ #define DMA_POOL_SIZE 256 struct dma_pool *s_dma_pool; @@ -2281,10 +2281,10 @@ typedef struct scsi_qla_host { uint32_t mbx_flags; #define MBX_IN_PROGRESS BIT_0 #define MBX_BUSY BIT_1 /* Got the Access */ -#define MBX_SLEEPING_ON_SEM BIT_2 +#define MBX_SLEEPING_ON_SEM BIT_2 #define MBX_POLLING_FOR_COMP BIT_3 #define MBX_COMPLETED BIT_4 -#define MBX_TIMEDOUT BIT_5 +#define MBX_TIMEDOUT BIT_5 #define MBX_ACCESS_TIMEDOUT BIT_6 mbx_cmd_t mc; @@ -2345,7 +2345,7 @@ typedef struct scsi_qla_host { test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \ test_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags)) || \ atomic_read(&ha->loop_state) == LOOP_DOWN) - + #define LOOP_RDY(ha) (!LOOP_NOT_READY(ha)) #define TGT_Q(ha, t) (ha->otgt[t]) diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index 694d09f3a43b..bebc32eb5869 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -21,8 +21,6 @@ #ifndef __QLA_FW_H #define __QLA_FW_H -// ISP24xx - #define RISC_SADDRESS 0x100000 #define MBS_CHECKSUM_ERROR 0x4010 @@ -60,7 +58,6 @@ struct port_database_24xx { #define PDS_PORT_UNAVAILABLE 0x07 #define PDS_PRLO_PENDING 0x09 #define PDS_LOGO_PENDING 0x11 -//FIXME #define PDS_PRLI2_PENDING 0x12 uint8_t hard_address[3]; diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index ec5ecbfbc1f6..bfebfc356975 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -317,7 +317,7 @@ qla2x00_gid_pt(scsi_qla_host_t *ha, sw_info_t *list) * single call. Return a failed status, and let GA_NXT handle * the overload. */ - if (i == MAX_FIBRE_DEVICES) + if (i == MAX_FIBRE_DEVICES) rval = QLA_FUNCTION_FAILED; } @@ -658,7 +658,7 @@ qla2x00_rsnn_nn(scsi_qla_host_t *ha) /* Prepare CT arguments -- node_name, symbolic node_name, size */ memcpy(ct_req->req.rsnn_nn.node_name, ha->node_name, WWN_SIZE); - + /* Prepare the Symbolic Node Name */ /* Board type */ snn = ct_req->req.rsnn_nn.sym_node_name; @@ -863,7 +863,7 @@ qla2x00_sns_gid_pt(scsi_qla_host_t *ha, sw_info_t *list) * single call. Return a failed status, and let GA_NXT handle * the overload. */ - if (i == MAX_FIBRE_DEVICES) + if (i == MAX_FIBRE_DEVICES) rval = QLA_FUNCTION_FAILED; } diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 786f2648114d..d2a367882e8b 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -123,10 +123,10 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha) (rval = qla2x00_init_rings(ha)) == QLA_SUCCESS) { check_fw_ready_again: /* - * Wait for a successful LIP up to a maximum + * Wait for a successful LIP up to a maximum * of (in seconds): RISC login timeout value, * RISC retry count value, and port down retry - * value OR a minimum of 4 seconds OR If no + * value OR a minimum of 4 seconds OR If no * cable, only 5 seconds. */ rval = qla2x00_fw_ready(ha); @@ -389,7 +389,7 @@ qla2x00_isp_firmware(scsi_qla_host_t *ha) int rval; /* Assume loading risc code */ - rval = QLA_FUNCTION_FAILED; + rval = QLA_FUNCTION_FAILED; if (ha->flags.disable_risc_code_load) { DEBUG2(printk("scsi(%ld): RISC CODE NOT loaded\n", @@ -417,7 +417,7 @@ qla2x00_isp_firmware(scsi_qla_host_t *ha) * Returns 0 on success. */ void -qla2x00_reset_chip(scsi_qla_host_t *ha) +qla2x00_reset_chip(scsi_qla_host_t *ha) { unsigned long flags = 0; struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; @@ -673,7 +673,7 @@ qla2x00_chip_diag(scsi_qla_host_t *ha) for (cnt = 6000000; cnt && (data == MBS_BUSY); cnt--) { udelay(5); data = RD_MAILBOX_REG(ha, reg, 0); - barrier(); + barrier(); } } else udelay(10); @@ -988,7 +988,7 @@ qla2x00_update_fw_options(scsi_qla_host_t *ha) emphasis = (ha->fw_seriallink_options[2] & (BIT_4 | BIT_3)) >> 3; tx_sens = ha->fw_seriallink_options[0] & - (BIT_3 | BIT_2 | BIT_1 | BIT_0); + (BIT_3 | BIT_2 | BIT_1 | BIT_0); rx_sens = (ha->fw_seriallink_options[0] & (BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4; ha->fw_options[10] = (emphasis << 14) | (swing << 8); @@ -1006,7 +1006,7 @@ qla2x00_update_fw_options(scsi_qla_host_t *ha) (BIT_7 | BIT_6 | BIT_5)) >> 5; emphasis = ha->fw_seriallink_options[3] & (BIT_1 | BIT_0); tx_sens = ha->fw_seriallink_options[1] & - (BIT_3 | BIT_2 | BIT_1 | BIT_0); + (BIT_3 | BIT_2 | BIT_1 | BIT_0); rx_sens = (ha->fw_seriallink_options[1] & (BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4; ha->fw_options[11] = (emphasis << 14) | (swing << 8); @@ -1171,7 +1171,7 @@ qla2x00_fw_ready(scsi_qla_host_t *ha) rval = QLA_SUCCESS; /* 20 seconds for loop down. */ - min_wait = 20; + min_wait = 20; /* * Firmware should take at most one RATOV to login, plus 5 seconds for @@ -1217,8 +1217,8 @@ qla2x00_fw_ready(scsi_qla_host_t *ha) (fw_state >= FSTATE_LOSS_OF_SYNC || fw_state == FSTATE_WAIT_AL_PA)) { /* Loop down. Timeout on min_wait for states - * other than Wait for Login. - */ + * other than Wait for Login. + */ if (time_after_eq(jiffies, mtime)) { qla_printk(KERN_INFO, ha, "Cable is unplugged...\n"); @@ -1620,7 +1620,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) * * The driver waits for the link to come up after link down * before returning I/Os to OS with "DID_NO_CONNECT". - */ + */ if (nv->link_down_timeout == 0) { ha->loop_down_abort_time = (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT); @@ -1628,7 +1628,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha) ha->link_down_timeout = nv->link_down_timeout; ha->loop_down_abort_time = (LOOP_DOWN_TIME - ha->link_down_timeout); - } + } /* * Need enough time to try and get the port back. @@ -1730,7 +1730,7 @@ qla2x00_alloc_fcport(scsi_qla_host_t *ha, int flags) * 2 = database was full and device was not configured. */ static int -qla2x00_configure_loop(scsi_qla_host_t *ha) +qla2x00_configure_loop(scsi_qla_host_t *ha) { int rval; unsigned long flags, save_flags; @@ -1838,7 +1838,7 @@ qla2x00_configure_loop(scsi_qla_host_t *ha) * 0 = success. */ static int -qla2x00_configure_local_loop(scsi_qla_host_t *ha) +qla2x00_configure_local_loop(scsi_qla_host_t *ha) { int rval, rval2; int found_devs; @@ -1993,16 +1993,16 @@ cleanup_allocation: } static void -qla2x00_probe_for_all_luns(scsi_qla_host_t *ha) +qla2x00_probe_for_all_luns(scsi_qla_host_t *ha) { fc_port_t *fcport; - qla2x00_mark_all_devices_lost(ha); + qla2x00_mark_all_devices_lost(ha); list_for_each_entry(fcport, &ha->fcports, list) { if (fcport->port_type != FCT_TARGET) continue; - qla2x00_update_fcport(ha, fcport); + qla2x00_update_fcport(ha, fcport); } } @@ -2573,7 +2573,7 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *ha, fc_port_t *dev) * Kernel context. */ static int -qla2x00_device_resync(scsi_qla_host_t *ha) +qla2x00_device_resync(scsi_qla_host_t *ha) { int rval; int rval2; @@ -2837,8 +2837,8 @@ qla2x00_fabric_login(scsi_qla_host_t *ha, fc_port_t *fcport, * unrecoverable / not handled error */ DEBUG2(printk("%s(%ld): failed=%x port_id=%02x%02x%02x " - "loop_id=%x jiffies=%lx.\n", - __func__, ha->host_no, mb[0], + "loop_id=%x jiffies=%lx.\n", + __func__, ha->host_no, mb[0], fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa, fcport->loop_id, jiffies)); @@ -2901,7 +2901,7 @@ qla2x00_local_device_login(scsi_qla_host_t *ha, uint16_t loop_id) * 0 = success */ int -qla2x00_loop_resync(scsi_qla_host_t *ha) +qla2x00_loop_resync(scsi_qla_host_t *ha) { int rval; uint32_t wait_time; @@ -2960,7 +2960,7 @@ qla2x00_rescan_fcports(scsi_qla_host_t *ha) rescan_done = 1; } - qla2x00_probe_for_all_luns(ha); + qla2x00_probe_for_all_luns(ha); } /* @@ -3030,7 +3030,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) ha->isp_ops.enable_intrs(ha); - ha->isp_abort_cnt = 0; + ha->isp_abort_cnt = 0; clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags); } else { /* failed the ISP abort */ ha->flags.online = 1; @@ -3039,7 +3039,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) qla_printk(KERN_WARNING, ha, "ISP error recovery failed - " "board disabled\n"); - /* + /* * The next call disables the board * completely. */ @@ -3064,7 +3064,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) status = 1; } } - + } if (status) { @@ -3119,11 +3119,11 @@ qla2x00_restart_isp(scsi_qla_host_t *ha) } spin_unlock_irqrestore(&ha->hardware_lock, flags); - + status = qla2x00_setup_chip(ha); spin_lock_irqsave(&ha->hardware_lock, flags); - + if (!IS_QLA24XX(ha) && !IS_QLA25XX(ha)) { /* Enable proper parity */ if (IS_QLA2300(ha)) @@ -3168,7 +3168,7 @@ qla2x00_restart_isp(scsi_qla_host_t *ha) } /* if no cable then assume it's good */ - if ((ha->device_flags & DFLG_NO_CABLE)) + if ((ha->device_flags & DFLG_NO_CABLE)) status = 0; DEBUG(printk("%s(): Configure loop done, status = 0x%x\n", diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index a4357f0aeea3..98f60bde2d4f 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -30,7 +30,7 @@ static __inline__ uint16_t qla2x00_debounce_register(volatile uint16_t __iomem * * register value. */ static __inline__ uint16_t -qla2x00_debounce_register(volatile uint16_t __iomem *addr) +qla2x00_debounce_register(volatile uint16_t __iomem *addr) { volatile uint16_t first; volatile uint16_t second; @@ -78,7 +78,7 @@ static __inline__ int qla2x00_normalize_dma_addr( * ffffabc1ffffeeee (0x100000000 + e_addr) * ffffabc100000000 (0x100000000 + e_addr) & ~(0xffffffff) * ffffabc100000000 (ne_addr) - * + * * Compute length of second DMA segment: * * 00000000ffffeeee (e_addr & 0xffffffff) @@ -114,48 +114,18 @@ qla2x00_normalize_dma_addr( } static __inline__ void qla2x00_poll(scsi_qla_host_t *); -static inline void +static inline void qla2x00_poll(scsi_qla_host_t *ha) { ha->isp_ops.intr_handler(0, ha, NULL); } -static __inline__ int qla2x00_is_wwn_zero(uint8_t *); - -/* - * qla2x00_is_wwn_zero - Check for zero node name - * - * Input: - * wwn = Pointer to WW name to check - * - * Returns: - * 1 if name is 0x00 else 0 - * - * Context: - * Kernel context. - */ -static __inline__ int -qla2x00_is_wwn_zero(uint8_t *wwn) -{ - int cnt; - - for (cnt = 0; cnt < WWN_SIZE ; cnt++, wwn++) { - if (*wwn != 0) - break; - } - /* if zero return 1 */ - if (cnt == WWN_SIZE) - return (1); - else - return (0); -} - static __inline__ void qla2x00_check_fabric_devices(scsi_qla_host_t *); /* * This routine will wait for fabric devices for * the reset delay. */ -static __inline__ void qla2x00_check_fabric_devices(scsi_qla_host_t *ha) +static __inline__ void qla2x00_check_fabric_devices(scsi_qla_host_t *ha) { uint16_t fw_state; @@ -188,54 +158,6 @@ qla2x00_issue_marker(scsi_qla_host_t *ha, int ha_locked) return (QLA_SUCCESS); } -static __inline__ void qla2x00_add_timer_to_cmd(srb_t *, int); -static __inline__ void qla2x00_delete_timer_from_cmd(srb_t *); - -/************************************************************************** -* qla2x00_add_timer_to_cmd -* -* Description: -* Creates a timer for the specified command. The timeout is usually -* the command time from kernel minus 2 secs. -* -* Input: -* sp - pointer to validate -* -* Returns: -* None. -**************************************************************************/ -static inline void -qla2x00_add_timer_to_cmd(srb_t *sp, int timeout) -{ - init_timer(&sp->timer); - sp->timer.expires = jiffies + timeout * HZ; - sp->timer.data = (unsigned long) sp; - sp->timer.function = (void (*) (unsigned long))qla2x00_cmd_timeout; - add_timer(&sp->timer); -} - -/************************************************************************** -* qla2x00_delete_timer_from_cmd -* -* Description: -* Delete the timer for the specified command. -* -* Input: -* sp - pointer to validate -* -* Returns: -* None. -**************************************************************************/ -static inline void -qla2x00_delete_timer_from_cmd(srb_t *sp) -{ - if (sp->timer.function != NULL) { - del_timer(&sp->timer); - sp->timer.function = NULL; - sp->timer.data = (unsigned long) NULL; - } -} - static inline uint8_t *host_to_fcp_swap(uint8_t *, uint32_t); static inline uint8_t * host_to_fcp_swap(uint8_t *fcp, uint32_t bsize) diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 4343c65523a5..c43ca670748a 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -468,7 +468,7 @@ queuing_error: * * Returns non-zero if a failure occured, else zero. */ -int +int __qla2x00_marker(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun, uint8_t type) { @@ -504,7 +504,7 @@ __qla2x00_marker(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun, return (QLA_SUCCESS); } -int +int qla2x00_marker(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun, uint8_t type) { diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index b960bdfe91e9..f6d94bea37f2 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -240,13 +240,13 @@ qla2x00_mbx_completion(scsi_qla_host_t *ha, uint16_t mb0) wptr = (uint16_t __iomem *)MAILBOX_REG(ha, reg, 1); for (cnt = 1; cnt < ha->mbx_count; cnt++) { - if (IS_QLA2200(ha) && cnt == 8) + if (IS_QLA2200(ha) && cnt == 8) wptr = (uint16_t __iomem *)MAILBOX_REG(ha, reg, 8); if (cnt == 4 || cnt == 5) ha->mailbox_out[cnt] = qla2x00_debounce_register(wptr); else ha->mailbox_out[cnt] = RD_REG_WORD(wptr); - + wptr++; } @@ -514,7 +514,7 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) "Configuration change detected: value=%x.\n", mb[1]); if (atomic_read(&ha->loop_state) != LOOP_DOWN) { - atomic_set(&ha->loop_state, LOOP_DOWN); + atomic_set(&ha->loop_state, LOOP_DOWN); if (!atomic_read(&ha->loop_down_timer)) atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME); @@ -846,7 +846,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) qla_printk(KERN_WARNING, ha, "Status Entry invalid handle.\n"); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); - if (ha->dpc_wait && !ha->dpc_active) + if (ha->dpc_wait && !ha->dpc_active) up(ha->dpc_wait); return; @@ -969,7 +969,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) } /* - * Check to see if SCSI Status is non zero. If so report SCSI + * Check to see if SCSI Status is non zero. If so report SCSI * Status. */ if (lscsi_status != 0) { @@ -991,7 +991,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) sp->request_sense_length = sense_len; sp->request_sense_ptr = cp->sense_buffer; - if (sp->request_sense_length > 32) + if (sp->request_sense_length > 32) sense_len = 32; memcpy(cp->sense_buffer, sense_data, sense_len); @@ -1096,7 +1096,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) break; case CS_ABORTED: - /* + /* * hv2.19.12 - DID_ABORT does not retry the request if we * aborted this request then abort otherwise it must be a * reset. @@ -1137,7 +1137,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) /* SCSI Mid-Layer handles device queue full */ - cp->result = DID_OK << 16 | lscsi_status; + cp->result = DID_OK << 16 | lscsi_status; break; @@ -1178,7 +1178,7 @@ qla2x00_status_cont_entry(scsi_qla_host_t *ha, sts_cont_entry_t *pkt) "sp=%p sp->state:%d\n", __func__, sp, sp->state)); qla_printk(KERN_INFO, ha, "cmd is NULL: already returned to OS (sp=%p)\n", - sp); + sp); ha->status_srb = NULL; return; @@ -1223,7 +1223,7 @@ qla2x00_error_entry(scsi_qla_host_t *ha, sts_entry_t *pkt) else if (pkt->entry_status & RF_INV_E_COUNT) qla_printk(KERN_ERR, ha, "%s: Invalid Entry Count\n", __func__); else if (pkt->entry_status & RF_INV_E_PARAM) - qla_printk(KERN_ERR, ha, + qla_printk(KERN_ERR, ha, "%s: Invalid Entry Parameter\n", __func__); else if (pkt->entry_status & RF_INV_E_TYPE) qla_printk(KERN_ERR, ha, "%s: Invalid Entry Type\n", __func__); @@ -1365,7 +1365,6 @@ qla24xx_process_response_queue(struct scsi_qla_host *ha) DEBUG3(printk(KERN_INFO "scsi(%ld): Process error entry.\n", ha->host_no)); - //FIXME qla2x00_error_entry(ha, (sts_entry_t *) pkt); ((response_t *)pkt)->signature = RESPONSE_PROCESSED; wmb(); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index ab361be003d3..2731457911bf 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -294,7 +294,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *ha, mbx_cmd_t *mcp) "Mailbox command timeout occured. Scheduling ISP " "abort.\n"); set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags); - if (ha->dpc_wait && !ha->dpc_active) + if (ha->dpc_wait && !ha->dpc_active) up(ha->dpc_wait); } else if (!abort_active) { @@ -1753,18 +1753,18 @@ qla2x00_login_fabric(scsi_qla_host_t *ha, uint16_t loop_id, uint8_t domain, /* * qla2x00_login_local_device * Issue login loop port mailbox command. - * + * * Input: * ha = adapter block pointer. * loop_id = device loop ID. * opt = command options. - * + * * Returns: * Return status code. - * + * * Context: * Kernel context. - * + * */ int qla2x00_login_local_device(scsi_qla_host_t *ha, uint16_t loop_id, @@ -2070,7 +2070,7 @@ qla2x00_get_resource_cnts(scsi_qla_host_t *ha, uint16_t *cur_xchg_cnt, } else { DEBUG11(printk("%s(%ld): done. mb1=%x mb2=%x mb3=%x mb6=%x " "mb7=%x mb10=%x.\n", __func__, ha->host_no, - mcp->mb[1], mcp->mb[2], mcp->mb[3], mcp->mb[6], mcp->mb[7], + mcp->mb[1], mcp->mb[2], mcp->mb[3], mcp->mb[6], mcp->mb[7], mcp->mb[10])); if (cur_xchg_cnt) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 072906994bf5..fd7e730bb3ba 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -64,7 +64,7 @@ MODULE_PARM_DESC(ql2xplogiabsentdevice, int ql2xenablezio = 0; module_param(ql2xenablezio, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xenablezio, - "Option to enable ZIO:If 1 then enable it otherwise" + "Option to enable ZIO:If 1 then enable it otherwise" " use the default set in the NVRAM." " Default is 0 : disabled"); @@ -89,7 +89,7 @@ static void qla2x00_free_device(scsi_qla_host_t *); static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha); /* - * SCSI host template entry points + * SCSI host template entry points */ static int qla2xxx_slave_configure(struct scsi_device * device); static int qla2xxx_slave_alloc(struct scsi_device *); @@ -280,7 +280,7 @@ char * qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str) { char un_str[10]; - + sprintf(str, "%d.%02d.%02d ", ha->fw_major_version, ha->fw_minor_version, ha->fw_subminor_version); @@ -504,14 +504,14 @@ qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd) /* * qla2x00_wait_for_hba_online - * Wait till the HBA is online after going through + * Wait till the HBA is online after going through * <= MAX_RETRIES_OF_ISP_ABORT or * finally HBA is disabled ie marked offline * * Input: * ha - pointer to host adapter structure - * - * Note: + * + * Note: * Does context switching-Release SPIN_LOCK * (if any) before calling this routine. * @@ -519,13 +519,13 @@ qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd) * Success (Adapter is online) : 0 * Failed (Adapter is offline/disabled) : 1 */ -static int +static int qla2x00_wait_for_hba_online(scsi_qla_host_t *ha) { int return_status; unsigned long wait_online; - wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ); + wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ); while (((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) || test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) || test_bit(ISP_ABORT_RETRY, &ha->dpc_flags) || @@ -533,8 +533,8 @@ qla2x00_wait_for_hba_online(scsi_qla_host_t *ha) msleep(1000); } - if (ha->flags.online) - return_status = QLA_SUCCESS; + if (ha->flags.online) + return_status = QLA_SUCCESS; else return_status = QLA_FUNCTION_FAILED; @@ -546,27 +546,27 @@ qla2x00_wait_for_hba_online(scsi_qla_host_t *ha) /* * qla2x00_wait_for_loop_ready * Wait for MAX_LOOP_TIMEOUT(5 min) value for loop - * to be in LOOP_READY state. + * to be in LOOP_READY state. * Input: * ha - pointer to host adapter structure - * - * Note: + * + * Note: * Does context switching-Release SPIN_LOCK * (if any) before calling this routine. - * + * * * Return: * Success (LOOP_READY) : 0 * Failed (LOOP_NOT_READY) : 1 */ -static inline int +static inline int qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha) { int return_status = QLA_SUCCESS; unsigned long loop_timeout ; /* wait for 5 min at the max for loop to be ready */ - loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ); + loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ); while ((!atomic_read(&ha->loop_down_timer) && atomic_read(&ha->loop_state) == LOOP_DOWN) || @@ -577,7 +577,7 @@ qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha) break; } } - return (return_status); + return (return_status); } /************************************************************************** @@ -647,13 +647,13 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) /* Wait for the command to be returned. */ if (ret == SUCCESS) { if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) { - qla_printk(KERN_ERR, ha, + qla_printk(KERN_ERR, ha, "scsi(%ld:%d:%d): Abort handler timed out -- %lx " "%x.\n", ha->host_no, id, lun, serial, ret); } } - qla_printk(KERN_INFO, ha, + qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d): Abort command issued -- %lx %x.\n", ha->host_no, id, lun, serial, ret); @@ -668,7 +668,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) * * Input: * ha - pointer to scsi_qla_host structure. -* t - target +* t - target * Returns: * Either SUCCESS or FAILED. * @@ -717,7 +717,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t) * executing commands. * * NOTE: The use of SP is undefined within this context. Do *NOT* -* attempt to use this value, even if you determine it is +* attempt to use this value, even if you determine it is * non-null. * * Input: @@ -793,7 +793,7 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd) "commands\n", __func__, ha->host_no)); qla_printk(KERN_INFO, ha, "%s: failed while waiting for commands\n", - __func__); + __func__); goto eh_dev_reset_done; } @@ -959,7 +959,7 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) /* * Fixme-may be dpc thread is active and processing - * loop_resync,so wait a while for it to + * loop_resync,so wait a while for it to * be completed and then issue big hammer.Otherwise * it may cause I/O failure as big hammer marks the * devices as lost kicking of the port_down_timer @@ -974,7 +974,7 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) goto eh_host_reset_lock; - } + } clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); /* Waiting for our command in done_queue to be returned to OS.*/ @@ -1020,7 +1020,7 @@ qla2x00_loop_reset(scsi_qla_host_t *ha) } if (status == QLA_SUCCESS && - ((!ha->flags.enable_target_reset && + ((!ha->flags.enable_target_reset && !ha->flags.enable_lip_reset) || ha->flags.enable_lip_full_login)) { @@ -1139,7 +1139,7 @@ qla2x00_config_dma_addressing(scsi_qla_host_t *ha) if (pci_set_consistent_dma_mask(ha->pdev, DMA_64BIT_MASK)) { - qla_printk(KERN_DEBUG, ha, + qla_printk(KERN_DEBUG, ha, "Failed to set 64 bit PCI consistent mask; " "using 32 bit.\n"); pci_set_consistent_dma_mask(ha->pdev, @@ -1666,7 +1666,7 @@ void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport, { if (atomic_read(&fcport->state) == FCS_ONLINE && fcport->rport) fc_remote_port_block(fcport->rport); - /* + /* * We may need to retry the login, so don't change the state of the * port but do the retries. */ @@ -1711,7 +1711,7 @@ void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport, * Context: */ void -qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha) +qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha) { fc_port_t *fcport; @@ -2061,11 +2061,11 @@ qla2x00_mem_free(scsi_qla_host_t *ha) * * Context: * Kernel context. - * + * * Note: Sets the ref_count for non Null sp to one. */ static int -qla2x00_allocate_sp_pool(scsi_qla_host_t *ha) +qla2x00_allocate_sp_pool(scsi_qla_host_t *ha) { int rval; @@ -2081,10 +2081,10 @@ qla2x00_allocate_sp_pool(scsi_qla_host_t *ha) /* * This routine frees all adapter allocated memory. - * + * */ static void -qla2x00_free_sp_pool( scsi_qla_host_t *ha) +qla2x00_free_sp_pool( scsi_qla_host_t *ha) { if (ha->srb_mempool) { mempool_destroy(ha->srb_mempool); @@ -2223,7 +2223,7 @@ qla2x00_do_dpc(void *data) DEBUG(printk("scsi(%ld): port login OK: logged in ID 0x%x\n", ha->host_no, fcport->loop_id)); - + fcport->port_login_retry_count = ha->port_down_retry_count * PORT_RETRY_TIME; atomic_set(&fcport->state, FCS_ONLINE); @@ -2254,7 +2254,7 @@ qla2x00_do_dpc(void *data) clear_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags); DEBUG(printk("scsi(%ld): qla2x00_login_retry()\n", ha->host_no)); - + set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags); DEBUG(printk("scsi(%ld): qla2x00_login_retry - end\n", @@ -2315,7 +2315,7 @@ qla2x00_do_dpc(void *data) * ha = adapter block pointer. */ static void -qla2x00_rst_aen(scsi_qla_host_t *ha) +qla2x00_rst_aen(scsi_qla_host_t *ha) { if (ha->flags.online && !ha->flags.reset_active && !atomic_read(&ha->loop_down_timer) && @@ -2386,7 +2386,7 @@ qla2x00_timer(scsi_qla_host_t *ha) * * Whenever, a port is in the LOST state we start decrementing its port * down timer every second until it reaches zero. Once it reaches zero - * the port it marked DEAD. + * the port it marked DEAD. */ t = 0; list_for_each_entry(fcport, &ha->fcports, list) { @@ -2398,9 +2398,9 @@ qla2x00_timer(scsi_qla_host_t *ha) if (atomic_read(&fcport->port_down_timer) == 0) continue; - if (atomic_dec_and_test(&fcport->port_down_timer) != 0) + if (atomic_dec_and_test(&fcport->port_down_timer) != 0) atomic_set(&fcport->state, FCS_DEVICE_DEAD); - + DEBUG(printk("scsi(%ld): fcport-%d - port retry count: " "%d remaining\n", ha->host_no, @@ -2422,7 +2422,7 @@ qla2x00_timer(scsi_qla_host_t *ha) ha->host_no)); if (!IS_QLA2100(ha) && ha->link_down_timeout) - atomic_set(&ha->loop_state, LOOP_DEAD); + atomic_set(&ha->loop_state, LOOP_DEAD); /* Schedule an ISP abort to return any tape commands. */ spin_lock_irqsave(&ha->hardware_lock, cpu_flags); diff --git a/drivers/scsi/qla2xxx/qla_rscn.c b/drivers/scsi/qla2xxx/qla_rscn.c index 416fb7308e87..af68590c3d11 100644 --- a/drivers/scsi/qla2xxx/qla_rscn.c +++ b/drivers/scsi/qla2xxx/qla_rscn.c @@ -82,7 +82,7 @@ static int qla2x00_send_login_iocb(scsi_qla_host_t *, struct io_descriptor *, static int qla2x00_send_login_iocb_cb(scsi_qla_host_t *, struct io_descriptor *, struct mbx_entry *); -/** +/** * Mailbox IOCB callback array. **/ static int (*iocb_function_cb_list[LAST_IOCB_CB]) @@ -95,7 +95,7 @@ static int (*iocb_function_cb_list[LAST_IOCB_CB]) }; -/** +/** * Generic IO descriptor handle routines. **/ @@ -169,7 +169,7 @@ qla2x00_handle_to_iodesc(scsi_qla_host_t *ha, uint32_t handle) } -/** +/** * IO descriptor allocation routines. **/ @@ -248,7 +248,7 @@ qla2x00_init_io_descriptors(scsi_qla_host_t *ha) } -/** +/** * IO descriptor timer routines. **/ @@ -299,7 +299,7 @@ qla2x00_add_iodesc_timer(struct io_descriptor *iodesc) add_timer(&iodesc->timer); } -/** +/** * IO descriptor support routines. **/ @@ -333,7 +333,7 @@ qla2x00_update_login_fcport(scsi_qla_host_t *ha, struct mbx_entry *mbxstat, } -/** +/** * Mailbox IOCB commands. **/ @@ -383,7 +383,7 @@ qla2x00_get_mbx_iocb_entry(scsi_qla_host_t *ha, uint32_t handle) * Returns QLA_SUCCESS if the IOCB was issued. */ static int -qla2x00_send_abort_iocb(scsi_qla_host_t *ha, struct io_descriptor *iodesc, +qla2x00_send_abort_iocb(scsi_qla_host_t *ha, struct io_descriptor *iodesc, uint32_t handle_to_abort, int ha_locked) { unsigned long flags = 0; @@ -720,7 +720,7 @@ qla2x00_send_login_iocb_cb(scsi_qla_host_t *ha, struct io_descriptor *iodesc, /* Only process the last command. */ if (remote_fcport->iodesc_idx_sent != iodesc->idx) { DEBUG14(printk("scsi(%ld): Login IOCB -- ignoring, sent to " - "[%02x%02x%02x], expected %x, received %x.\n", + "[%02x%02x%02x], expected %x, received %x.\n", ha->host_no, iodesc->d_id.b.domain, iodesc->d_id.b.area, iodesc->d_id.b.al_pa, remote_fcport->iodesc_idx_sent, iodesc->idx)); @@ -754,9 +754,9 @@ qla2x00_send_login_iocb_cb(scsi_qla_host_t *ha, struct io_descriptor *iodesc, DEBUG14(printk("scsi(%ld): Login IOCB -- status=%x mb1=%x pn=" "%02x%02x%02x%02x%02x%02x%02x%02x.\n", ha->host_no, status, - mb[1], mbxstat->port_name[0], mbxstat->port_name[1], - mbxstat->port_name[2], mbxstat->port_name[3], - mbxstat->port_name[4], mbxstat->port_name[5], + mb[1], mbxstat->port_name[0], mbxstat->port_name[1], + mbxstat->port_name[2], mbxstat->port_name[3], + mbxstat->port_name[4], mbxstat->port_name[5], mbxstat->port_name[6], mbxstat->port_name[7])); memcpy(remote_fcport->node_name, mbxstat->node_name, WWN_SIZE); @@ -1052,7 +1052,7 @@ qla2x00_send_login_iocb_cb(scsi_qla_host_t *ha, struct io_descriptor *iodesc, } -/** +/** * IO descriptor processing routines. **/ @@ -1136,7 +1136,7 @@ qla2x00_handle_port_rscn(scsi_qla_host_t *ha, uint32_t rscn_entry, remote_fcport = rscn_fcport; } - /* + /* * If the port is already in our fcport list and online, send an ADISC * to see if it's still alive. Issue login if a new fcport or the known * fcport is currently offline. @@ -1191,7 +1191,7 @@ qla2x00_handle_port_rscn(scsi_qla_host_t *ha, uint32_t rscn_entry, } return (QLA_SUCCESS); } - + /* Send ADISC if the fcport is online */ if (atomic_read(&remote_fcport->state) == FCS_ONLINE || remote_fcport->iodesc_idx_sent == IODESC_ADISC_NEEDED) { @@ -1229,7 +1229,7 @@ qla2x00_handle_port_rscn(scsi_qla_host_t *ha, uint32_t rscn_entry, * abort. */ uint32_t handle_to_abort; - + iodesc = &ha->io_descriptors[ remote_fcport->iodesc_idx_sent]; qla2x00_remove_iodesc_timer(iodesc); diff --git a/drivers/scsi/qla2xxx/qla_settings.h b/drivers/scsi/qla2xxx/qla_settings.h index c58f5faad9e1..a7d8ed08e06b 100644 --- a/drivers/scsi/qla2xxx/qla_settings.h +++ b/drivers/scsi/qla2xxx/qla_settings.h @@ -22,33 +22,8 @@ */ #define DEBUG_QLA2100 0 /* For Debug of qla2x00 */ -#define STOP_ON_RESET 0 #define USE_ABORT_TGT 1 /* Use Abort Target mbx cmd */ -#define VSA 0 /* Volume Set Addressing */ - -/* Failover options */ -#define MAX_RECOVERYTIME 10 /* - * Max suspend time for a lun recovery - * time - */ -#define MAX_FAILBACKTIME 5 /* Max suspend time before fail back */ - -#define QLA_CMD_TIMER_DELTA 3 - -/* - * When a lun is suspended for the "Not Ready" condition then it will suspend - * the lun for increments of 6 sec delays. SUSPEND_COUNT is that count. - */ -#define SUSPEND_COUNT 10 /* 6 secs * 10 retries = 60 secs */ - -/* - * Defines the time in seconds that the driver extends the command timeout to - * get around the problem where the mid-layer only allows 5 retries for - * commands that return BUS_BUSY - */ -#define EXTEND_CMD_TIMEOUT 60 - #define MAX_RETRIES_OF_ISP_ABORT 5 /* Max time to wait for the loop to be in LOOP_READY state */ diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index c95ef2bb089a..9cfac8c184de 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -31,7 +31,7 @@ static void qla2x00_nv_write(scsi_qla_host_t *, uint16_t); */ /** - * qla2x00_lock_nvram_access() - + * qla2x00_lock_nvram_access() - * @ha: HA context */ void @@ -64,7 +64,7 @@ qla2x00_lock_nvram_access(scsi_qla_host_t *ha) } /** - * qla2x00_unlock_nvram_access() - + * qla2x00_unlock_nvram_access() - * @ha: HA context */ void @@ -542,18 +542,18 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr, conf_addr = flash_conf_to_access_addr(0x03d8); switch (man_id) { - case 0xbf: // STT flash + case 0xbf: /* STT flash. */ rest_addr = 0x1fff; sec_mask = 0x3e000; if (flash_id == 0x80) conf_addr = flash_conf_to_access_addr(0x0352); break; - case 0x13: // ST M25P80 + case 0x13: /* ST M25P80. */ rest_addr = 0x3fff; sec_mask = 0x3c000; break; default: - // Default to 64 kb sector size + /* Default to 64 kb sector size. */ rest_addr = 0x3fff; sec_mask = 0x3c000; break; diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 98e68867261a..232369d156c9 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -17,7 +17,7 @@ * ******************************************************************************/ /* - * Driver version + * Driver version */ #define QLA2XXX_VERSION "8.00.02b5-k" |