qla2xxx: T10-Dif: add T10-PI support

Add support for T10-Dif for Target Mode to qla driver.
The driver will look for firmware attribute that support
this feature.  When the feature is present, the capabilities
will be report to TCM layer.

Add CTIO CRC2 iocb to build T10-Dif commands.
Add support routines to process good & error cases.

Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

1 files changed, 39 insertions, 2 deletions

diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index 68fb66fdb757..896cb23adb77 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -472,6 +472,11 @@ static int tcm_qla2xxx_write_pending(struct se_cmd *se_cmd)
 	cmd->sg_cnt = se_cmd->t_data_nents;
 	cmd->sg = se_cmd->t_data_sg;
 
+	cmd->prot_sg_cnt = se_cmd->t_prot_nents;
+	cmd->prot_sg = se_cmd->t_prot_sg;
+	cmd->blk_sz  = se_cmd->se_dev->dev_attrib.block_size;
+	se_cmd->pi_err = 0;
+
 	/*
 	 * qla_target.c:qlt_rdy_to_xfer() will call pci_map_sg() to setup
 	 * the SGL mappings into PCIe memory for incoming FCP WRITE data.
@@ -567,8 +572,13 @@ static void tcm_qla2xxx_handle_data_work(struct work_struct *work)
 			return;
 		}
 
-		transport_generic_request_failure(&cmd->se_cmd,
-						  TCM_CHECK_CONDITION_ABORT_CMD);
+		if (cmd->se_cmd.pi_err)
+			transport_generic_request_failure(&cmd->se_cmd,
+				cmd->se_cmd.pi_err);
+		else
+			transport_generic_request_failure(&cmd->se_cmd,
+				TCM_CHECK_CONDITION_ABORT_CMD);
+
 		return;
 	}
 
@@ -584,6 +594,27 @@ static void tcm_qla2xxx_handle_data(struct qla_tgt_cmd *cmd)
 	queue_work(tcm_qla2xxx_free_wq, &cmd->work);
 }
 
+static void tcm_qla2xxx_handle_dif_work(struct work_struct *work)
+{
+	struct qla_tgt_cmd *cmd = container_of(work, struct qla_tgt_cmd, work);
+
+	/* take an extra kref to prevent cmd free too early.
+	 * need to wait for SCSI status/check condition to
+	 * finish responding generate by transport_generic_request_failure.
+	 */
+	kref_get(&cmd->se_cmd.cmd_kref);
+	transport_generic_request_failure(&cmd->se_cmd, cmd->se_cmd.pi_err);
+}
+
+/*
+ * Called from qla_target.c:qlt_do_ctio_completion()
+ */
+static void tcm_qla2xxx_handle_dif_err(struct qla_tgt_cmd *cmd)
+{
+	INIT_WORK(&cmd->work, tcm_qla2xxx_handle_dif_work);
+	queue_work(tcm_qla2xxx_free_wq, &cmd->work);
+}
+
 /*
  * Called from qla_target.c:qlt_issue_task_mgmt()
  */
@@ -610,6 +641,11 @@ static int tcm_qla2xxx_queue_data_in(struct se_cmd *se_cmd)
 	cmd->sg = se_cmd->t_data_sg;
 	cmd->offset = 0;
 
+	cmd->prot_sg_cnt = se_cmd->t_prot_nents;
+	cmd->prot_sg = se_cmd->t_prot_sg;
+	cmd->blk_sz  = se_cmd->se_dev->dev_attrib.block_size;
+	se_cmd->pi_err = 0;
+
 	/*
 	 * Now queue completed DATA_IN the qla2xxx LLD and response ring
 	 */
@@ -1600,6 +1636,7 @@ static void tcm_qla2xxx_update_sess(struct qla_tgt_sess *sess, port_id_t s_id,
 static struct qla_tgt_func_tmpl tcm_qla2xxx_template = {
 	.handle_cmd		= tcm_qla2xxx_handle_cmd,
 	.handle_data		= tcm_qla2xxx_handle_data,
+	.handle_dif_err		= tcm_qla2xxx_handle_dif_err,
 	.handle_tmr		= tcm_qla2xxx_handle_tmr,
 	.free_cmd		= tcm_qla2xxx_free_cmd,
 	.free_mcmd		= tcm_qla2xxx_free_mcmd,