[SCSI] qla2xxx: Add support to retrieve/update HBA option-rom.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 669 insertions, 0 deletions

diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 3105bb93cc19..3866a5760f15 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -989,3 +989,672 @@ qla24xx_beacon_off(struct scsi_qla_host *ha)
 
 	return QLA_SUCCESS;
 }
+
+
+/*
+ * Flash support routines
+ */
+
+/**
+ * qla2x00_flash_enable() - Setup flash for reading and writing.
+ * @ha: HA context
+ */
+static void
+qla2x00_flash_enable(scsi_qla_host_t *ha)
+{
+	uint16_t data;
+	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+	data = RD_REG_WORD(&reg->ctrl_status);
+	data |= CSR_FLASH_ENABLE;
+	WRT_REG_WORD(&reg->ctrl_status, data);
+	RD_REG_WORD(&reg->ctrl_status);		/* PCI Posting. */
+}
+
+/**
+ * qla2x00_flash_disable() - Disable flash and allow RISC to run.
+ * @ha: HA context
+ */
+static void
+qla2x00_flash_disable(scsi_qla_host_t *ha)
+{
+	uint16_t data;
+	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+	data = RD_REG_WORD(&reg->ctrl_status);
+	data &= ~(CSR_FLASH_ENABLE);
+	WRT_REG_WORD(&reg->ctrl_status, data);
+	RD_REG_WORD(&reg->ctrl_status);		/* PCI Posting. */
+}
+
+/**
+ * qla2x00_read_flash_byte() - Reads a byte from flash
+ * @ha: HA context
+ * @addr: Address in flash to read
+ *
+ * A word is read from the chip, but, only the lower byte is valid.
+ *
+ * Returns the byte read from flash @addr.
+ */
+static uint8_t
+qla2x00_read_flash_byte(scsi_qla_host_t *ha, uint32_t addr)
+{
+	uint16_t data;
+	uint16_t bank_select;
+	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+	bank_select = RD_REG_WORD(&reg->ctrl_status);
+
+	if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
+		/* Specify 64K address range: */
+		/*  clear out Module Select and Flash Address bits [19:16]. */
+		bank_select &= ~0xf8;
+		bank_select |= addr >> 12 & 0xf0;
+		bank_select |= CSR_FLASH_64K_BANK;
+		WRT_REG_WORD(&reg->ctrl_status, bank_select);
+		RD_REG_WORD(&reg->ctrl_status);	/* PCI Posting. */
+
+		WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
+		data = RD_REG_WORD(&reg->flash_data);
+
+		return (uint8_t)data;
+	}
+
+	/* Setup bit 16 of flash address. */
+	if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
+		bank_select |= CSR_FLASH_64K_BANK;
+		WRT_REG_WORD(&reg->ctrl_status, bank_select);
+		RD_REG_WORD(&reg->ctrl_status);	/* PCI Posting. */
+	} else if (((addr & BIT_16) == 0) &&
+	    (bank_select & CSR_FLASH_64K_BANK)) {
+		bank_select &= ~(CSR_FLASH_64K_BANK);
+		WRT_REG_WORD(&reg->ctrl_status, bank_select);
+		RD_REG_WORD(&reg->ctrl_status);	/* PCI Posting. */
+	}
+
+	/* Always perform IO mapped accesses to the FLASH registers. */
+	if (ha->pio_address) {
+		uint16_t data2;
+
+		reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
+		WRT_REG_WORD_PIO(&reg->flash_address, (uint16_t)addr);
+		do {
+			data = RD_REG_WORD_PIO(&reg->flash_data);
+			barrier();
+			cpu_relax();
+			data2 = RD_REG_WORD_PIO(&reg->flash_data);
+		} while (data != data2);
+	} else {
+		WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
+		data = qla2x00_debounce_register(&reg->flash_data);
+	}
+
+	return (uint8_t)data;
+}
+
+/**
+ * qla2x00_write_flash_byte() - Write a byte to flash
+ * @ha: HA context
+ * @addr: Address in flash to write
+ * @data: Data to write
+ */
+static void
+qla2x00_write_flash_byte(scsi_qla_host_t *ha, uint32_t addr, uint8_t data)
+{
+	uint16_t bank_select;
+	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+	bank_select = RD_REG_WORD(&reg->ctrl_status);
+	if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
+		/* Specify 64K address range: */
+		/*  clear out Module Select and Flash Address bits [19:16]. */
+		bank_select &= ~0xf8;
+		bank_select |= addr >> 12 & 0xf0;
+		bank_select |= CSR_FLASH_64K_BANK;
+		WRT_REG_WORD(&reg->ctrl_status, bank_select);
+		RD_REG_WORD(&reg->ctrl_status);	/* PCI Posting. */
+
+		WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
+		RD_REG_WORD(&reg->ctrl_status);		/* PCI Posting. */
+		WRT_REG_WORD(&reg->flash_data, (uint16_t)data);
+		RD_REG_WORD(&reg->ctrl_status);		/* PCI Posting. */
+
+		return;
+	}
+
+	/* Setup bit 16 of flash address. */
+	if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
+		bank_select |= CSR_FLASH_64K_BANK;
+		WRT_REG_WORD(&reg->ctrl_status, bank_select);
+		RD_REG_WORD(&reg->ctrl_status);	/* PCI Posting. */
+	} else if (((addr & BIT_16) == 0) &&
+	    (bank_select & CSR_FLASH_64K_BANK)) {
+		bank_select &= ~(CSR_FLASH_64K_BANK);
+		WRT_REG_WORD(&reg->ctrl_status, bank_select);
+		RD_REG_WORD(&reg->ctrl_status);	/* PCI Posting. */
+	}
+
+	/* Always perform IO mapped accesses to the FLASH registers. */
+	if (ha->pio_address) {
+		reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
+		WRT_REG_WORD_PIO(&reg->flash_address, (uint16_t)addr);
+		WRT_REG_WORD_PIO(&reg->flash_data, (uint16_t)data);
+	} else {
+		WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
+		RD_REG_WORD(&reg->ctrl_status);		/* PCI Posting. */
+		WRT_REG_WORD(&reg->flash_data, (uint16_t)data);
+		RD_REG_WORD(&reg->ctrl_status);		/* PCI Posting. */
+	}
+}
+
+/**
+ * qla2x00_poll_flash() - Polls flash for completion.
+ * @ha: HA context
+ * @addr: Address in flash to poll
+ * @poll_data: Data to be polled
+ * @man_id: Flash manufacturer ID
+ * @flash_id: Flash ID
+ *
+ * This function polls the device until bit 7 of what is read matches data
+ * bit 7 or until data bit 5 becomes a 1.  If that hapens, the flash ROM timed
+ * out (a fatal error).  The flash book recommeds reading bit 7 again after
+ * reading bit 5 as a 1.
+ *
+ * Returns 0 on success, else non-zero.
+ */
+static int
+qla2x00_poll_flash(scsi_qla_host_t *ha, uint32_t addr, uint8_t poll_data,
+    uint8_t man_id, uint8_t flash_id)
+{
+	int status;
+	uint8_t flash_data;
+	uint32_t cnt;
+
+	status = 1;
+
+	/* Wait for 30 seconds for command to finish. */
+	poll_data &= BIT_7;
+	for (cnt = 3000000; cnt; cnt--) {
+		flash_data = qla2x00_read_flash_byte(ha, addr);
+		if ((flash_data & BIT_7) == poll_data) {
+			status = 0;
+			break;
+		}
+
+		if (man_id != 0x40 && man_id != 0xda) {
+			if ((flash_data & BIT_5) && cnt > 2)
+				cnt = 2;
+		}
+		udelay(10);
+		barrier();
+	}
+	return status;
+}
+
+#define IS_OEM_001(ha) \
+	((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2322 && \
+	 (ha)->pdev->subsystem_vendor == 0x1028 && \
+	 (ha)->pdev->subsystem_device == 0x0170)
+
+/**
+ * qla2x00_program_flash_address() - Programs a flash address
+ * @ha: HA context
+ * @addr: Address in flash to program
+ * @data: Data to be written in flash
+ * @man_id: Flash manufacturer ID
+ * @flash_id: Flash ID
+ *
+ * Returns 0 on success, else non-zero.
+ */
+static int
+qla2x00_program_flash_address(scsi_qla_host_t *ha, uint32_t addr, uint8_t data,
+    uint8_t man_id, uint8_t flash_id)
+{
+	/* Write Program Command Sequence. */
+	if (IS_OEM_001(ha)) {
+		qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
+		qla2x00_write_flash_byte(ha, 0x555, 0x55);
+		qla2x00_write_flash_byte(ha, 0xaaa, 0xa0);
+		qla2x00_write_flash_byte(ha, addr, data);
+	} else {
+		if (man_id == 0xda && flash_id == 0xc1) {
+			qla2x00_write_flash_byte(ha, addr, data);
+			if (addr & 0x7e)
+				return 0;
+		} else {
+			qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
+			qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
+			qla2x00_write_flash_byte(ha, 0x5555, 0xa0);
+			qla2x00_write_flash_byte(ha, addr, data);
+		}
+	}
+
+	udelay(150);
+
+	/* Wait for write to complete. */
+	return qla2x00_poll_flash(ha, addr, data, man_id, flash_id);
+}
+
+/**
+ * qla2x00_erase_flash() - Erase the flash.
+ * @ha: HA context
+ * @man_id: Flash manufacturer ID
+ * @flash_id: Flash ID
+ *
+ * Returns 0 on success, else non-zero.
+ */
+static int
+qla2x00_erase_flash(scsi_qla_host_t *ha, uint8_t man_id, uint8_t flash_id)
+{
+	/* Individual Sector Erase Command Sequence */
+	if (IS_OEM_001(ha)) {
+		qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
+		qla2x00_write_flash_byte(ha, 0x555, 0x55);
+		qla2x00_write_flash_byte(ha, 0xaaa, 0x80);
+		qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
+		qla2x00_write_flash_byte(ha, 0x555, 0x55);
+		qla2x00_write_flash_byte(ha, 0xaaa, 0x10);
+	} else {
+		qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
+		qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
+		qla2x00_write_flash_byte(ha, 0x5555, 0x80);
+		qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
+		qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
+		qla2x00_write_flash_byte(ha, 0x5555, 0x10);
+	}
+
+	udelay(150);
+
+	/* Wait for erase to complete. */
+	return qla2x00_poll_flash(ha, 0x00, 0x80, man_id, flash_id);
+}
+
+/**
+ * qla2x00_erase_flash_sector() - Erase a flash sector.
+ * @ha: HA context
+ * @addr: Flash sector to erase
+ * @sec_mask: Sector address mask
+ * @man_id: Flash manufacturer ID
+ * @flash_id: Flash ID
+ *
+ * Returns 0 on success, else non-zero.
+ */
+static int
+qla2x00_erase_flash_sector(scsi_qla_host_t *ha, uint32_t addr,
+    uint32_t sec_mask, uint8_t man_id, uint8_t flash_id)
+{
+	/* Individual Sector Erase Command Sequence */
+	qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
+	qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
+	qla2x00_write_flash_byte(ha, 0x5555, 0x80);
+	qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
+	qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
+	if (man_id == 0x1f && flash_id == 0x13)
+		qla2x00_write_flash_byte(ha, addr & sec_mask, 0x10);
+	else
+		qla2x00_write_flash_byte(ha, addr & sec_mask, 0x30);
+
+	udelay(150);
+
+	/* Wait for erase to complete. */
+	return qla2x00_poll_flash(ha, addr, 0x80, man_id, flash_id);
+}
+
+/**
+ * qla2x00_get_flash_manufacturer() - Read manufacturer ID from flash chip.
+ * @man_id: Flash manufacturer ID
+ * @flash_id: Flash ID
+ */
+static void
+qla2x00_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
+    uint8_t *flash_id)
+{
+	qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
+	qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
+	qla2x00_write_flash_byte(ha, 0x5555, 0x90);
+	*man_id = qla2x00_read_flash_byte(ha, 0x0000);
+	*flash_id = qla2x00_read_flash_byte(ha, 0x0001);
+	qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
+	qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
+	qla2x00_write_flash_byte(ha, 0x5555, 0xf0);
+}
+
+
+static inline void
+qla2x00_suspend_hba(struct scsi_qla_host *ha)
+{
+	int cnt;
+	unsigned long flags;
+	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+	/* Suspend HBA. */
+	scsi_block_requests(ha->host);
+	ha->isp_ops.disable_intrs(ha);
+	set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
+
+	/* Pause RISC. */
+	spin_lock_irqsave(&ha->hardware_lock, flags);
+	WRT_REG_WORD(&reg->hccr, HCCR_PAUSE_RISC);
+	RD_REG_WORD(&reg->hccr);
+	if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
+		for (cnt = 0; cnt < 30000; cnt++) {
+			if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) != 0)
+				break;
+			udelay(100);
+		}
+	} else {
+		udelay(10);
+	}
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+}
+
+static inline void
+qla2x00_resume_hba(struct scsi_qla_host *ha)
+{
+	/* Resume HBA. */
+	clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
+	set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
+	up(ha->dpc_wait);
+	qla2x00_wait_for_hba_online(ha);
+	scsi_unblock_requests(ha->host);
+}
+
+uint8_t *
+qla2x00_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
+    uint32_t offset, uint32_t length)
+{
+	unsigned long flags;
+	uint32_t addr, midpoint;
+	uint8_t *data;
+	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+	/* Suspend HBA. */
+	qla2x00_suspend_hba(ha);
+
+	/* Go with read. */
+	spin_lock_irqsave(&ha->hardware_lock, flags);
+	midpoint = ha->optrom_size / 2;
+
+	qla2x00_flash_enable(ha);
+	WRT_REG_WORD(&reg->nvram, 0);
+	RD_REG_WORD(&reg->nvram);		/* PCI Posting. */
+	for (addr = offset, data = buf; addr < length; addr++, data++) {
+		if (addr == midpoint) {
+			WRT_REG_WORD(&reg->nvram, NVR_SELECT);
+			RD_REG_WORD(&reg->nvram);	/* PCI Posting. */
+		}
+
+		*data = qla2x00_read_flash_byte(ha, addr);
+	}
+	qla2x00_flash_disable(ha);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+	/* Resume HBA. */
+	qla2x00_resume_hba(ha);
+
+	return buf;
+}
+
+int
+qla2x00_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
+    uint32_t offset, uint32_t length)
+{
+
+	int rval;
+	unsigned long flags;
+	uint8_t man_id, flash_id, sec_number, data;
+	uint16_t wd;
+	uint32_t addr, liter, sec_mask, rest_addr;
+	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+	/* Suspend HBA. */
+	qla2x00_suspend_hba(ha);
+
+	rval = QLA_SUCCESS;
+	sec_number = 0;
+
+	/* Reset ISP chip. */
+	spin_lock_irqsave(&ha->hardware_lock, flags);
+	WRT_REG_WORD(&reg->ctrl_status, CSR_ISP_SOFT_RESET);
+	pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
+
+	/* Go with write. */
+	qla2x00_flash_enable(ha);
+	do {	/* Loop once to provide quick error exit */
+		/* Structure of flash memory based on manufacturer */
+		if (IS_OEM_001(ha)) {
+			/* OEM variant with special flash part. */
+			man_id = flash_id = 0;
+			rest_addr = 0xffff;
+			sec_mask   = 0x10000;
+			goto update_flash;
+		}
+		qla2x00_get_flash_manufacturer(ha, &man_id, &flash_id);
+		switch (man_id) {
+		case 0x20: /* ST flash. */
+			if (flash_id == 0xd2 || flash_id == 0xe3) {
+				/*
+				 * ST m29w008at part - 64kb sector size with
+				 * 32kb,8kb,8kb,16kb sectors at memory address
+				 * 0xf0000.
+				 */
+				rest_addr = 0xffff;
+				sec_mask = 0x10000;
+				break;   
+			}
+			/*
+			 * ST m29w010b part - 16kb sector size
+			 * Default to 16kb sectors
+			 */
+			rest_addr = 0x3fff;
+			sec_mask = 0x1c000;
+			break;
+		case 0x40: /* Mostel flash. */
+			/* Mostel v29c51001 part - 512 byte sector size. */
+			rest_addr = 0x1ff;
+			sec_mask = 0x1fe00;
+			break;
+		case 0xbf: /* SST flash. */
+			/* SST39sf10 part - 4kb sector size. */
+			rest_addr = 0xfff;
+			sec_mask = 0x1f000;
+			break;
+		case 0xda: /* Winbond flash. */
+			/* Winbond W29EE011 part - 256 byte sector size. */
+			rest_addr = 0x7f;
+			sec_mask = 0x1ff80;
+			break;
+		case 0xc2: /* Macronix flash. */
+			/* 64k sector size. */
+			if (flash_id == 0x38 || flash_id == 0x4f) {
+				rest_addr = 0xffff;
+				sec_mask = 0x10000;
+				break;
+			}
+			/* Fall through... */
+
+		case 0x1f: /* Atmel flash. */
+			/* 512k sector size. */
+			if (flash_id == 0x13) {
+				rest_addr = 0x7fffffff;
+				sec_mask =   0x80000000;
+				break;
+			}
+			/* Fall through... */
+
+		case 0x01: /* AMD flash. */
+			if (flash_id == 0x38 || flash_id == 0x40 ||
+			    flash_id == 0x4f) {
+				/* Am29LV081 part - 64kb sector size. */
+				/* Am29LV002BT part - 64kb sector size. */
+				rest_addr = 0xffff;
+				sec_mask = 0x10000;
+				break;
+			} else if (flash_id == 0x3e) {
+				/*
+				 * Am29LV008b part - 64kb sector size with
+				 * 32kb,8kb,8kb,16kb sector at memory address
+				 * h0xf0000.
+				 */
+				rest_addr = 0xffff;
+				sec_mask = 0x10000;
+				break;
+			} else if (flash_id == 0x20 || flash_id == 0x6e) {
+				/*
+				 * Am29LV010 part or AM29f010 - 16kb sector
+				 * size.
+				 */
+				rest_addr = 0x3fff;
+				sec_mask = 0x1c000;
+				break;
+			} else if (flash_id == 0x6d) {
+				/* Am29LV001 part - 8kb sector size. */
+				rest_addr = 0x1fff;
+				sec_mask = 0x1e000;
+				break;
+			}
+		default:
+			/* Default to 16 kb sector size. */
+			rest_addr = 0x3fff;
+			sec_mask = 0x1c000;
+			break;
+		}
+
+update_flash:
+		if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
+			if (qla2x00_erase_flash(ha, man_id, flash_id)) {
+				rval = QLA_FUNCTION_FAILED;
+				break;
+			}
+		}
+
+		for (addr = offset, liter = 0; liter < length; liter++,
+		    addr++) {
+			data = buf[liter];
+			/* Are we at the beginning of a sector? */
+			if ((addr & rest_addr) == 0) {
+				if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
+					if (addr >= 0x10000UL) {
+						if (((addr >> 12) & 0xf0) &&
+						    ((man_id == 0x01 &&
+							flash_id == 0x3e) ||
+						     (man_id == 0x20 &&
+							 flash_id == 0xd2))) {
+							sec_number++;
+							if (sec_number == 1) {
+								rest_addr =
+								    0x7fff;
+								sec_mask =
+								    0x18000;
+							} else if (
+							    sec_number == 2 ||
+							    sec_number == 3) {
+								rest_addr =
+								    0x1fff;
+								sec_mask =
+								    0x1e000;
+							} else if (
+							    sec_number == 4) {
+								rest_addr =
+								    0x3fff;
+								sec_mask =
+								    0x1c000;
+							}
+						}
+					}
+				} else if (addr == ha->optrom_size / 2) {
+					WRT_REG_WORD(&reg->nvram, NVR_SELECT);
+					RD_REG_WORD(&reg->nvram);
+				}
+
+				if (flash_id == 0xda && man_id == 0xc1) {
+					qla2x00_write_flash_byte(ha, 0x5555,
+					    0xaa);
+					qla2x00_write_flash_byte(ha, 0x2aaa,
+					    0x55);
+					qla2x00_write_flash_byte(ha, 0x5555,
+					    0xa0);
+				} else if (!IS_QLA2322(ha) && !IS_QLA6322(ha)) {
+					/* Then erase it */
+					if (qla2x00_erase_flash_sector(ha,
+					    addr, sec_mask, man_id,
+					    flash_id)) {
+						rval = QLA_FUNCTION_FAILED;
+						break;
+					}
+					if (man_id == 0x01 && flash_id == 0x6d)
+						sec_number++;
+				}
+			}
+
+			if (man_id == 0x01 && flash_id == 0x6d) {
+				if (sec_number == 1 &&
+				    addr == (rest_addr - 1)) {
+					rest_addr = 0x0fff;
+					sec_mask   = 0x1f000;
+				} else if (sec_number == 3 && (addr & 0x7ffe)) {
+					rest_addr = 0x3fff;
+					sec_mask   = 0x1c000;
+				}
+			}
+
+			if (qla2x00_program_flash_address(ha, addr, data,
+			    man_id, flash_id)) {
+				rval = QLA_FUNCTION_FAILED;
+				break;
+			}
+		}
+	} while (0);
+	qla2x00_flash_disable(ha);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+	/* Resume HBA. */
+	qla2x00_resume_hba(ha);
+
+	return rval;
+}
+
+uint8_t *
+qla24xx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
+    uint32_t offset, uint32_t length)
+{
+	/* Suspend HBA. */
+	scsi_block_requests(ha->host);
+	ha->isp_ops.disable_intrs(ha);
+	set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
+
+	/* Go with read. */
+	qla24xx_read_flash_data(ha, (uint32_t *)buf, offset >> 2, length >> 2);
+
+	/* Resume HBA. */
+	clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
+	ha->isp_ops.enable_intrs(ha);
+	scsi_unblock_requests(ha->host);
+
+	return buf;
+}
+
+int
+qla24xx_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
+    uint32_t offset, uint32_t length)
+{
+	int rval;
+
+	/* Suspend HBA. */
+	scsi_block_requests(ha->host);
+	ha->isp_ops.disable_intrs(ha);
+	set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
+
+	/* Go with write. */
+	rval = qla24xx_write_flash_data(ha, (uint32_t *)buf, offset >> 2,
+	    length >> 2);
+
+	/* Resume HBA -- RISC reset needed. */
+	clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
+	set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
+	up(ha->dpc_wait);
+	qla2x00_wait_for_hba_online(ha);
+	scsi_unblock_requests(ha->host);
+
+	return rval;
+}