Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, smartpqi, lpfc,
  target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
  fixes.

  Notable core changes are the removal of scsi->tag which caused some
  churn in obsolete drivers and a sweep through all drivers to call
  scsi_done() directly instead of scsi->done() which removes a pointer
  indirection from the hot path and a move to register core sysfs files
  earlier, which means they're available to KOBJ_ADD processing, which
  necessitates switching all drivers to using attribute groups"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
  scsi: lpfc: Update lpfc version to 14.0.0.3
  scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
  scsi: lpfc: Fix link down processing to address NULL pointer dereference
  scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
  scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
  scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
  scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
  scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
  scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
  scsi: ufs: mediatek: Avoid sched_clock() misuse
  scsi: mpt3sas: Make mpt3sas_dev_attrs static
  scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
  scsi: target: core: Stop using bdevname()
  scsi: aha1542: Use memcpy_{from,to}_bvec()
  scsi: sr: Add error handling support for add_disk()
  scsi: sd: Add error handling support for add_disk()
  scsi: target: Perform ALUA group changes in one step
  scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
  scsi: target: Fix alua_tg_pt_gps_count tracking
  scsi: target: Fix ordered tag handling
  ...

1 files changed, 50 insertions, 53 deletions

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 836fedcea241..c3ff50ffe205 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -737,7 +737,7 @@ void qla2x00_sp_compl(srb_t *sp, int res)
 	sp->free(sp);
 	cmd->result = res;
 	CMD_SP(cmd) = NULL;
-	cmd->scsi_done(cmd);
+	scsi_done(cmd);
 	if (comp)
 		complete(comp);
 }
@@ -828,7 +828,7 @@ void qla2xxx_qpair_sp_compl(srb_t *sp, int res)
 	sp->free(sp);
 	cmd->result = res;
 	CMD_SP(cmd) = NULL;
-	cmd->scsi_done(cmd);
+	scsi_done(cmd);
 	if (comp)
 		complete(comp);
 }
@@ -950,7 +950,7 @@ qc24_target_busy:
 	return SCSI_MLQUEUE_TARGET_BUSY;
 
 qc24_fail_command:
-	cmd->scsi_done(cmd);
+	scsi_done(cmd);
 
 	return 0;
 }
@@ -1038,7 +1038,7 @@ qc24_target_busy:
 	return SCSI_MLQUEUE_TARGET_BUSY;
 
 qc24_fail_command:
-	cmd->scsi_done(cmd);
+	scsi_done(cmd);
 
 	return 0;
 }
@@ -1258,6 +1258,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	uint32_t ratov_j;
 	struct qla_qpair *qpair;
 	unsigned long flags;
+	int fast_fail_status = SUCCESS;
 
 	if (qla2x00_isp_reg_stat(ha)) {
 		ql_log(ql_log_info, vha, 0x8042,
@@ -1266,9 +1267,10 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 		return FAILED;
 	}
 
+	/* Save any FAST_IO_FAIL value to return later if abort succeeds */
 	ret = fc_block_scsi_eh(cmd);
 	if (ret != 0)
-		return ret;
+		fast_fail_status = ret;
 
 	sp = scsi_cmd_priv(cmd);
 	qpair = sp->qpair;
@@ -1276,7 +1278,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	vha->cmd_timeout_cnt++;
 
 	if ((sp->fcport && sp->fcport->deleted) || !qpair)
-		return SUCCESS;
+		return fast_fail_status != SUCCESS ? fast_fail_status : FAILED;
 
 	spin_lock_irqsave(qpair->qp_lock_ptr, flags);
 	sp->comp = ∁
@@ -1311,7 +1313,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 			    __func__, ha->r_a_tov/10);
 			ret = FAILED;
 		} else {
-			ret = SUCCESS;
+			ret = fast_fail_status;
 		}
 		break;
 	default:
@@ -2794,6 +2796,16 @@ qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time)
 	return atomic_read(&vha->loop_state) == LOOP_READY;
 }
 
+static void qla_heartbeat_work_fn(struct work_struct *work)
+{
+	struct qla_hw_data *ha = container_of(work,
+		struct qla_hw_data, heartbeat_work);
+	struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
+
+	if (!ha->flags.mbox_busy && base_vha->flags.init_done)
+		qla_no_op_mb(base_vha);
+}
+
 static void qla2x00_iocb_work_fn(struct work_struct *work)
 {
 	struct scsi_qla_host *vha = container_of(work,
@@ -3232,6 +3244,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	    host->transportt, sht->vendor_id);
 
 	INIT_WORK(&base_vha->iocb_work, qla2x00_iocb_work_fn);
+	INIT_WORK(&ha->heartbeat_work, qla_heartbeat_work_fn);
 
 	/* Set up the irqs */
 	ret = qla2x00_request_irqs(ha, rsp);
@@ -3364,6 +3377,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	    host->can_queue, base_vha->req,
 	    base_vha->mgmt_svr_loop_id, host->sg_tablesize);
 
+	/* Check if FW supports MQ or not for ISP25xx */
+	if (IS_QLA25XX(ha) && !(ha->fw_attributes & BIT_6))
+		ha->mqenable = 0;
+
 	if (ha->mqenable) {
 		bool startit = false;
 
@@ -7114,17 +7131,6 @@ intr_on_check:
 			qla2x00_lip_reset(base_vha);
 		}
 
-		if (test_bit(HEARTBEAT_CHK, &base_vha->dpc_flags)) {
-			/*
-			 * if there is a mb in progress then that's
-			 * enough of a check to see if fw is still ticking.
-			 */
-			if (!ha->flags.mbox_busy && base_vha->flags.init_done)
-				qla_no_op_mb(base_vha);
-
-			clear_bit(HEARTBEAT_CHK, &base_vha->dpc_flags);
-		}
-
 		ha->dpc_active = 0;
 end_loop:
 		set_current_state(TASK_INTERRUPTIBLE);
@@ -7183,57 +7189,51 @@ qla2x00_rst_aen(scsi_qla_host_t *vha)
 
 static bool qla_do_heartbeat(struct scsi_qla_host *vha)
 {
-	u64 cmd_cnt, prev_cmd_cnt;
-	bool do_hb = false;
 	struct qla_hw_data *ha = vha->hw;
-	int i;
+	u32 cmpl_cnt;
+	u16 i;
+	bool do_heartbeat = false;
 
-	/* if cmds are still pending down in fw, then do hb */
-	if (ha->base_qpair->cmd_cnt != ha->base_qpair->cmd_completion_cnt) {
-		do_hb = true;
+	/*
+	 * Allow do_heartbeat only if we don’t have any active interrupts,
+	 * but there are still IOs outstanding with firmware.
+	 */
+	cmpl_cnt = ha->base_qpair->cmd_completion_cnt;
+	if (cmpl_cnt == ha->base_qpair->prev_completion_cnt &&
+	    cmpl_cnt != ha->base_qpair->cmd_cnt) {
+		do_heartbeat = true;
 		goto skip;
 	}
+	ha->base_qpair->prev_completion_cnt = cmpl_cnt;
 
 	for (i = 0; i < ha->max_qpairs; i++) {
-		if (ha->queue_pair_map[i] &&
-		    ha->queue_pair_map[i]->cmd_cnt !=
-		    ha->queue_pair_map[i]->cmd_completion_cnt) {
-			do_hb = true;
-			break;
+		if (ha->queue_pair_map[i]) {
+			cmpl_cnt = ha->queue_pair_map[i]->cmd_completion_cnt;
+			if (cmpl_cnt == ha->queue_pair_map[i]->prev_completion_cnt &&
+			    cmpl_cnt != ha->queue_pair_map[i]->cmd_cnt) {
+				do_heartbeat = true;
+				break;
+			}
+			ha->queue_pair_map[i]->prev_completion_cnt = cmpl_cnt;
 		}
 	}
 
 skip:
-	prev_cmd_cnt = ha->prev_cmd_cnt;
-	cmd_cnt = ha->base_qpair->cmd_cnt;
-	for (i = 0; i < ha->max_qpairs; i++) {
-		if (ha->queue_pair_map[i])
-			cmd_cnt += ha->queue_pair_map[i]->cmd_cnt;
-	}
-	ha->prev_cmd_cnt = cmd_cnt;
-
-	if (!do_hb && ((cmd_cnt - prev_cmd_cnt) > 50))
-		/*
-		 * IOs are completing before periodic hb check.
-		 * IOs seems to be running, do hb for sanity check.
-		 */
-		do_hb = true;
-
-	return do_hb;
+	return do_heartbeat;
 }
 
 static void qla_heart_beat(struct scsi_qla_host *vha)
 {
+	struct qla_hw_data *ha = vha->hw;
+
 	if (vha->vp_idx)
 		return;
 
 	if (vha->hw->flags.eeh_busy || qla2x00_chip_is_down(vha))
 		return;
 
-	if (qla_do_heartbeat(vha)) {
-		set_bit(HEARTBEAT_CHK, &vha->dpc_flags);
-		qla2xxx_wake_dpc(vha);
-	}
+	if (qla_do_heartbeat(vha))
+		queue_work(ha->wq, &ha->heartbeat_work);
 }
 
 /**************************************************************************
@@ -7943,7 +7943,7 @@ struct scsi_host_template qla2xxx_driver_template = {
 	.sg_tablesize		= SG_ALL,
 
 	.max_sectors		= 0xFFFF,
-	.shost_attrs		= qla2x00_host_attrs,
+	.shost_groups		= qla2x00_host_groups,
 
 	.supported_mode		= MODE_INITIATOR,
 	.track_queue_depth	= 1,
@@ -8131,9 +8131,6 @@ qla2x00_module_init(void)
 	if (ql2xextended_error_logging == 1)
 		ql2xextended_error_logging = QL_DBG_DEFAULT1_MASK;
 
-	if (ql2x_ini_mode == QLA2XXX_INI_MODE_DUAL)
-		qla_insert_tgt_attrs();
-
 	qla2xxx_transport_template =
 	    fc_attach_transport(&qla2xxx_transport_functions);
 	if (!qla2xxx_transport_template) {