diff options
| author | Jayamohan Kallickal <jayamohank@gmail.com> | 2013-09-29 02:35:44 +0400 |
|---|---|---|
| committer | James Bottomley <JBottomley@Parallels.com> | 2013-10-25 12:58:06 +0400 |
| commit | 843ae752eea769899d3c2008d7f2b2e094ddb6cc (patch) | |
| tree | 221d9768c1441a7be4509e030d9a958e8c1a6473 /drivers/scsi/be2iscsi/be_main.h | |
| parent | 92665a6628902246368494972a38d84b1b091cb8 (diff) | |
| download | linux-843ae752eea769899d3c2008d7f2b2e094ddb6cc.tar.xz | |
[SCSI] be2iscsi: Config parameters update for Dual Chute Support
On the adapter iSCSI protocol can be loaded on either one or both
the CHUTE.Check on which CHUTE iSCSI Protocol is loaded and get
configuration parameters based on which driver initization is done.
For BE-X family iSCSI protocol is loaded only on single chute.
Signed-off-by: John Soni Jose <sony.john-n@emulex.com>
Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi/be2iscsi/be_main.h')
| -rw-r--r-- | drivers/scsi/be2iscsi/be_main.h | 27 |
1 files changed, 16 insertions, 11 deletions
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h index 6ac4f2f5bbaa..39bc1857adc5 100644 --- a/drivers/scsi/be2iscsi/be_main.h +++ b/drivers/scsi/be2iscsi/be_main.h @@ -271,6 +271,12 @@ struct invalidate_command_table { #define chip_be2(phba) (phba->generation == BE_GEN2) #define chip_be3_r(phba) (phba->generation == BE_GEN3) #define is_chip_be2_be3r(phba) (chip_be3_r(phba) || (chip_be2(phba))) + +#define BEISCSI_ULP0 0 +#define BEISCSI_ULP1 1 +#define BEISCSI_ULP_COUNT 2 +#define BEISCSI_ULP0_LOADED 0x01 +#define BEISCSI_ULP1_LOADED 0x02 struct beiscsi_hba { struct hba_parameters params; struct hwi_controller *phwi_ctrlr; @@ -328,20 +334,19 @@ struct beiscsi_hba { * group together since they are used most frequently * for cid to cri conversion */ - unsigned int iscsi_cid_start; unsigned int phys_port; + unsigned int iscsi_cid_start[BEISCSI_ULP_COUNT]; +#define BEISCSI_GET_CID_COUNT(phba, ulp_num) \ + (phba->fw_config.iscsi_cid_count[ulp_num]) + unsigned int iscsi_cid_count[BEISCSI_ULP_COUNT]; + unsigned int iscsi_icd_count[BEISCSI_ULP_COUNT]; + unsigned int iscsi_icd_start[BEISCSI_ULP_COUNT]; + unsigned int iscsi_chain_start[BEISCSI_ULP_COUNT]; + unsigned int iscsi_chain_count[BEISCSI_ULP_COUNT]; - unsigned int isr_offset; - unsigned int iscsi_icd_start; - unsigned int iscsi_cid_count; - unsigned int iscsi_icd_count; - unsigned int pci_function; - - unsigned short cid_alloc; - unsigned short cid_free; - unsigned short avlbl_cids; unsigned short iscsi_features; - spinlock_t cid_lock; + uint16_t dual_ulp_aware; + unsigned long ulp_supported; } fw_config; unsigned int state; |