[SCSI] aic94xx: new driver

This is the end point of the separate aic94xx driver based on the
original driver and transport class from Luben Tuikov
<ltuikov@yahoo.com>

The log of the separate development is:

Alexis Bruemmer:
  o aic94xx: fix hotplug/unplug for expanderless systems
  o aic94xx: disable split completion timer/setting by default
  o aic94xx: wide port off expander support
  o aic94xx: remove various inline functions
  o aic94xx: use bitops
  o aic94xx: remove queue comment
  o aic94xx: remove sas_common.c
  o aic94xx: sas remove depot's
  o aic94xx: use available list_for_each_entry_safe_reverse()
  o aic94xx: sas header file merge

James Bottomley:
  o aic94xx: fix TF_TMF_NO_CTX processing
  o aic94xx: convert to request_firmware interface
  o aic94xx: fix hotplug/unplug
  o aic94xx: add link error counts to the expander phys
  o aic94xx: add transport class phy reset capability
  o aic94xx: remove local_attached flag
  o Remove README
  o Fixup Makefile variable for libsas rename
  o Rename sas->libsas
  o aic94xx: correct return code for sas_discover_event
  o aic94xx: use parent backlink port
  o aic94xx: remove channel abstraction
  o aic94xx: fix routing algorithms
  o aic94xx: add backlink port
  o aic94xx: fix cascaded expander properties
  o aic94xx: fix sleep under lock
  o aic94xx: fix panic on module removal in complex topology
  o aic94xx: make use of the new sas_port
  o rename sas_port to asd_sas_port
  o Fix for eh_strategy_handler move
  o aic94xx: move entirely over to correct transport class formulation
  o remove last vestages of sas_rphy_alloc()
  o update for eh_timed_out move
  o Preliminary expander support for aic94xx
  o sas: remove event thread
  o minor warning cleanups
  o remove last vestiges of id mapping arrays
  o Further updates
  o Convert aic94xx over entirely to the transport class end device and
  o update aic94xx/sas to use the new sas transport class end device
  o [PATCH] aic94xx: attaching to the sas transport class
  o Add missing completion removal from prior patch
  o [PATCH] aic94xx: attaching to the sas transport class
  o Build fixes from akpm

Jeff Garzik:
  o [scsi aic94xx] Remove ->owner from PCI info table

Luben Tuikov:
  o initial aic94xx driver

Mike Anderson:
  o aic94xx: fix panic on module insertion
  o aic94xx: stub out SATA_DEV case
  o aic94xx: compile warning cleanups
  o aic94xx: sas_alloc_task
  o aic94xx: ref count update
  o aic94xx nexus loss time value
  o [PATCH] aic94xx: driver assertion in non-x86 BIOS env

Randy Dunlap:
  o libsas: externs not needed

Robert Tarte:
  o aic94xx: sequence patch - fixes SATA support

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 732 insertions, 0 deletions

diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c
new file mode 100644
index 000000000000..fc1b7438a913
--- /dev/null
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -0,0 +1,732 @@
+/*
+ * Aic94xx SAS/SATA driver SCB management.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/pci.h>
+
+#include "aic94xx.h"
+#include "aic94xx_reg.h"
+#include "aic94xx_hwi.h"
+#include "aic94xx_seq.h"
+
+#include "aic94xx_dump.h"
+
+/* ---------- EMPTY SCB ---------- */
+
+#define DL_PHY_MASK      7
+#define BYTES_DMAED      0
+#define PRIMITIVE_RECVD  0x08
+#define PHY_EVENT        0x10
+#define LINK_RESET_ERROR 0x18
+#define TIMER_EVENT      0x20
+#define REQ_TASK_ABORT   0xF0
+#define REQ_DEVICE_RESET 0xF1
+#define SIGNAL_NCQ_ERROR 0xF2
+#define CLEAR_NCQ_ERROR  0xF3
+
+#define PHY_EVENTS_STATUS (CURRENT_LOSS_OF_SIGNAL | CURRENT_OOB_DONE   \
+			   | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \
+			   | CURRENT_OOB_ERROR)
+
+static inline void get_lrate_mode(struct asd_phy *phy, u8 oob_mode)
+{
+	switch (oob_mode & 7) {
+	case PHY_SPEED_60:
+		/* FIXME: sas transport class doesn't have this */
+		phy->sas_phy.linkrate = PHY_LINKRATE_6;
+		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
+		break;
+	case PHY_SPEED_30:
+		phy->sas_phy.linkrate = PHY_LINKRATE_3;
+		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
+		break;
+	case PHY_SPEED_15:
+		phy->sas_phy.linkrate = PHY_LINKRATE_1_5;
+		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
+		break;
+	}
+	if (oob_mode & SAS_MODE)
+		phy->sas_phy.oob_mode = SAS_OOB_MODE;
+	else if (oob_mode & SATA_MODE)
+		phy->sas_phy.oob_mode = SATA_OOB_MODE;
+}
+
+static inline void asd_phy_event_tasklet(struct asd_ascb *ascb,
+					 struct done_list_struct *dl)
+{
+	struct asd_ha_struct *asd_ha = ascb->ha;
+	struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
+	int phy_id = dl->status_block[0] & DL_PHY_MASK;
+	struct asd_phy *phy = &asd_ha->phys[phy_id];
+
+	u8 oob_status = dl->status_block[1] & PHY_EVENTS_STATUS;
+	u8 oob_mode   = dl->status_block[2];
+
+	switch (oob_status) {
+	case CURRENT_LOSS_OF_SIGNAL:
+		/* directly attached device was removed */
+		ASD_DPRINTK("phy%d: device unplugged\n", phy_id);
+		asd_turn_led(asd_ha, phy_id, 0);
+		sas_phy_disconnected(&phy->sas_phy);
+		sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
+		break;
+	case CURRENT_OOB_DONE:
+		/* hot plugged device */
+		asd_turn_led(asd_ha, phy_id, 1);
+		get_lrate_mode(phy, oob_mode);
+		ASD_DPRINTK("phy%d device plugged: lrate:0x%x, proto:0x%x\n",
+			    phy_id, phy->sas_phy.linkrate, phy->sas_phy.iproto);
+		sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+		break;
+	case CURRENT_SPINUP_HOLD:
+		/* hot plug SATA, no COMWAKE sent */
+		asd_turn_led(asd_ha, phy_id, 1);
+		sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
+		break;
+	case CURRENT_GTO_TIMEOUT:
+	case CURRENT_OOB_ERROR:
+		ASD_DPRINTK("phy%d error while OOB: oob status:0x%x\n", phy_id,
+			    dl->status_block[1]);
+		asd_turn_led(asd_ha, phy_id, 0);
+		sas_phy_disconnected(&phy->sas_phy);
+		sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
+		break;
+	}
+}
+
+/* If phys are enabled sparsely, this will do the right thing. */
+static inline unsigned ord_phy(struct asd_ha_struct *asd_ha,
+			       struct asd_phy *phy)
+{
+	u8 enabled_mask = asd_ha->hw_prof.enabled_phys;
+	int i, k = 0;
+
+	for_each_phy(enabled_mask, enabled_mask, i) {
+		if (&asd_ha->phys[i] == phy)
+			return k;
+		k++;
+	}
+	return 0;
+}
+
+/**
+ * asd_get_attached_sas_addr -- extract/generate attached SAS address
+ * phy: pointer to asd_phy
+ * sas_addr: pointer to buffer where the SAS address is to be written
+ *
+ * This function extracts the SAS address from an IDENTIFY frame
+ * received.  If OOB is SATA, then a SAS address is generated from the
+ * HA tables.
+ *
+ * LOCKING: the frame_rcvd_lock needs to be held since this parses the frame
+ * buffer.
+ */
+static inline void asd_get_attached_sas_addr(struct asd_phy *phy, u8 *sas_addr)
+{
+	if (phy->sas_phy.frame_rcvd[0] == 0x34
+	    && phy->sas_phy.oob_mode == SATA_OOB_MODE) {
+		struct asd_ha_struct *asd_ha = phy->sas_phy.ha->lldd_ha;
+		/* FIS device-to-host */
+		u64 addr = be64_to_cpu(*(__be64 *)phy->phy_desc->sas_addr);
+
+		addr += asd_ha->hw_prof.sata_name_base + ord_phy(asd_ha, phy);
+		*(__be64 *)sas_addr = cpu_to_be64(addr);
+	} else {
+		struct sas_identify_frame *idframe =
+			(void *) phy->sas_phy.frame_rcvd;
+		memcpy(sas_addr, idframe->sas_addr, SAS_ADDR_SIZE);
+	}
+}
+
+static inline void asd_bytes_dmaed_tasklet(struct asd_ascb *ascb,
+					   struct done_list_struct *dl,
+					   int edb_id, int phy_id)
+{
+	unsigned long flags;
+	int edb_el = edb_id + ascb->edb_index;
+	struct asd_dma_tok *edb = ascb->ha->seq.edb_arr[edb_el];
+	struct asd_phy *phy = &ascb->ha->phys[phy_id];
+	struct sas_ha_struct *sas_ha = phy->sas_phy.ha;
+	u16 size = ((dl->status_block[3] & 7) << 8) | dl->status_block[2];
+
+	size = min(size, (u16) sizeof(phy->frame_rcvd));
+
+	spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+	memcpy(phy->sas_phy.frame_rcvd, edb->vaddr, size);
+	phy->sas_phy.frame_rcvd_size = size;
+	asd_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+	spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+	asd_dump_frame_rcvd(phy, dl);
+	sas_ha->notify_port_event(&phy->sas_phy, PORTE_BYTES_DMAED);
+}
+
+static inline void asd_link_reset_err_tasklet(struct asd_ascb *ascb,
+					      struct done_list_struct *dl,
+					      int phy_id)
+{
+	struct asd_ha_struct *asd_ha = ascb->ha;
+	struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
+	struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+	u8 lr_error = dl->status_block[1];
+	u8 retries_left = dl->status_block[2];
+
+	switch (lr_error) {
+	case 0:
+		ASD_DPRINTK("phy%d: Receive ID timer expired\n", phy_id);
+		break;
+	case 1:
+		ASD_DPRINTK("phy%d: Loss of signal\n", phy_id);
+		break;
+	case 2:
+		ASD_DPRINTK("phy%d: Loss of dword sync\n", phy_id);
+		break;
+	case 3:
+		ASD_DPRINTK("phy%d: Receive FIS timeout\n", phy_id);
+		break;
+	default:
+		ASD_DPRINTK("phy%d: unknown link reset error code: 0x%x\n",
+			    phy_id, lr_error);
+		break;
+	}
+
+	asd_turn_led(asd_ha, phy_id, 0);
+	sas_phy_disconnected(sas_phy);
+	sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+
+	if (retries_left == 0) {
+		int num = 1;
+		struct asd_ascb *cp = asd_ascb_alloc_list(ascb->ha, &num,
+							  GFP_ATOMIC);
+		if (!cp) {
+			asd_printk("%s: out of memory\n", __FUNCTION__);
+			goto out;
+		}
+		ASD_DPRINTK("phy%d: retries:0 performing link reset seq\n",
+			    phy_id);
+		asd_build_control_phy(cp, phy_id, ENABLE_PHY);
+		if (asd_post_ascb_list(ascb->ha, cp, 1) != 0)
+			asd_ascb_free(cp);
+	}
+out:
+	;
+}
+
+static inline void asd_primitive_rcvd_tasklet(struct asd_ascb *ascb,
+					      struct done_list_struct *dl,
+					      int phy_id)
+{
+	unsigned long flags;
+	struct sas_ha_struct *sas_ha = &ascb->ha->sas_ha;
+	struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+	u8  reg  = dl->status_block[1];
+	u32 cont = dl->status_block[2] << ((reg & 3)*8);
+
+	reg &= ~3;
+	switch (reg) {
+	case LmPRMSTAT0BYTE0:
+		switch (cont) {
+		case LmBROADCH:
+		case LmBROADRVCH0:
+		case LmBROADRVCH1:
+		case LmBROADSES:
+			ASD_DPRINTK("phy%d: BROADCAST change received:%d\n",
+				    phy_id, cont);
+			spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+			sas_phy->sas_prim = ffs(cont);
+			spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+			sas_ha->notify_port_event(sas_phy,PORTE_BROADCAST_RCVD);
+			break;
+
+		case LmUNKNOWNP:
+			ASD_DPRINTK("phy%d: unknown BREAK\n", phy_id);
+			break;
+
+		default:
+			ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n",
+				    phy_id, reg, cont);
+			break;
+		}
+		break;
+	case LmPRMSTAT1BYTE0:
+		switch (cont) {
+		case LmHARDRST:
+			ASD_DPRINTK("phy%d: HARD_RESET primitive rcvd\n",
+				    phy_id);
+			/* The sequencer disables all phys on that port.
+			 * We have to re-enable the phys ourselves. */
+			sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
+			break;
+
+		default:
+			ASD_DPRINTK("phy%d: primitive reg:0x%x, cont:0x%04x\n",
+				    phy_id, reg, cont);
+			break;
+		}
+		break;
+	default:
+		ASD_DPRINTK("unknown primitive register:0x%x\n",
+			    dl->status_block[1]);
+		break;
+	}
+}
+
+/**
+ * asd_invalidate_edb -- invalidate an EDB and if necessary post the ESCB
+ * @ascb: pointer to Empty SCB
+ * @edb_id: index [0,6] to the empty data buffer which is to be invalidated
+ *
+ * After an EDB has been invalidated, if all EDBs in this ESCB have been
+ * invalidated, the ESCB is posted back to the sequencer.
+ * Context is tasklet/IRQ.
+ */
+void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id)
+{
+	struct asd_seq_data *seq = &ascb->ha->seq;
+	struct empty_scb *escb = &ascb->scb->escb;
+	struct sg_el     *eb   = &escb->eb[edb_id];
+	struct asd_dma_tok *edb = seq->edb_arr[ascb->edb_index + edb_id];
+
+	memset(edb->vaddr, 0, ASD_EDB_SIZE);
+	eb->flags |= ELEMENT_NOT_VALID;
+	escb->num_valid--;
+
+	if (escb->num_valid == 0) {
+		int i;
+		/* ASD_DPRINTK("reposting escb: vaddr: 0x%p, "
+			    "dma_handle: 0x%08llx, next: 0x%08llx, "
+			    "index:%d, opcode:0x%02x\n",
+			    ascb->dma_scb.vaddr,
+			    (u64)ascb->dma_scb.dma_handle,
+			    le64_to_cpu(ascb->scb->header.next_scb),
+			    le16_to_cpu(ascb->scb->header.index),
+			    ascb->scb->header.opcode);
+		*/
+		escb->num_valid = ASD_EDBS_PER_SCB;
+		for (i = 0; i < ASD_EDBS_PER_SCB; i++)
+			escb->eb[i].flags = 0;
+		if (!list_empty(&ascb->list))
+			list_del_init(&ascb->list);
+		i = asd_post_escb_list(ascb->ha, ascb, 1);
+		if (i)
+			asd_printk("couldn't post escb, err:%d\n", i);
+	}
+}
+
+static void escb_tasklet_complete(struct asd_ascb *ascb,
+				  struct done_list_struct *dl)
+{
+	struct asd_ha_struct *asd_ha = ascb->ha;
+	struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
+	int edb = (dl->opcode & DL_PHY_MASK) - 1; /* [0xc1,0xc7] -> [0,6] */
+	u8  sb_opcode = dl->status_block[0];
+	int phy_id = sb_opcode & DL_PHY_MASK;
+	struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+
+	if (edb > 6 || edb < 0) {
+		ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
+			    edb, dl->opcode);
+		ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n",
+			    sb_opcode, phy_id);
+		ASD_DPRINTK("escb: vaddr: 0x%p, "
+			    "dma_handle: 0x%llx, next: 0x%llx, "
+			    "index:%d, opcode:0x%02x\n",
+			    ascb->dma_scb.vaddr,
+			    (unsigned long long)ascb->dma_scb.dma_handle,
+			    (unsigned long long)
+			    le64_to_cpu(ascb->scb->header.next_scb),
+			    le16_to_cpu(ascb->scb->header.index),
+			    ascb->scb->header.opcode);
+	}
+
+	sb_opcode &= ~DL_PHY_MASK;
+
+	switch (sb_opcode) {
+	case BYTES_DMAED:
+		ASD_DPRINTK("%s: phy%d: BYTES_DMAED\n", __FUNCTION__, phy_id);
+		asd_bytes_dmaed_tasklet(ascb, dl, edb, phy_id);
+		break;
+	case PRIMITIVE_RECVD:
+		ASD_DPRINTK("%s: phy%d: PRIMITIVE_RECVD\n", __FUNCTION__,
+			    phy_id);
+		asd_primitive_rcvd_tasklet(ascb, dl, phy_id);
+		break;
+	case PHY_EVENT:
+		ASD_DPRINTK("%s: phy%d: PHY_EVENT\n", __FUNCTION__, phy_id);
+		asd_phy_event_tasklet(ascb, dl);
+		break;
+	case LINK_RESET_ERROR:
+		ASD_DPRINTK("%s: phy%d: LINK_RESET_ERROR\n", __FUNCTION__,
+			    phy_id);
+		asd_link_reset_err_tasklet(ascb, dl, phy_id);
+		break;
+	case TIMER_EVENT:
+		ASD_DPRINTK("%s: phy%d: TIMER_EVENT, lost dw sync\n",
+			    __FUNCTION__, phy_id);
+		asd_turn_led(asd_ha, phy_id, 0);
+		/* the device is gone */
+		sas_phy_disconnected(sas_phy);
+		sas_ha->notify_port_event(sas_phy, PORTE_TIMER_EVENT);
+		break;
+	case REQ_TASK_ABORT:
+		ASD_DPRINTK("%s: phy%d: REQ_TASK_ABORT\n", __FUNCTION__,
+			    phy_id);
+		break;
+	case REQ_DEVICE_RESET:
+		ASD_DPRINTK("%s: phy%d: REQ_DEVICE_RESET\n", __FUNCTION__,
+			    phy_id);
+		break;
+	case SIGNAL_NCQ_ERROR:
+		ASD_DPRINTK("%s: phy%d: SIGNAL_NCQ_ERROR\n", __FUNCTION__,
+			    phy_id);
+		break;
+	case CLEAR_NCQ_ERROR:
+		ASD_DPRINTK("%s: phy%d: CLEAR_NCQ_ERROR\n", __FUNCTION__,
+			    phy_id);
+		break;
+	default:
+		ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __FUNCTION__,
+			    phy_id, sb_opcode);
+		ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
+			    edb, dl->opcode);
+		ASD_DPRINTK("sb_opcode : 0x%x, phy_id: 0x%x\n",
+			    sb_opcode, phy_id);
+		ASD_DPRINTK("escb: vaddr: 0x%p, "
+			    "dma_handle: 0x%llx, next: 0x%llx, "
+			    "index:%d, opcode:0x%02x\n",
+			    ascb->dma_scb.vaddr,
+			    (unsigned long long)ascb->dma_scb.dma_handle,
+			    (unsigned long long)
+			    le64_to_cpu(ascb->scb->header.next_scb),
+			    le16_to_cpu(ascb->scb->header.index),
+			    ascb->scb->header.opcode);
+
+		break;
+	}
+
+	asd_invalidate_edb(ascb, edb);
+}
+
+int asd_init_post_escbs(struct asd_ha_struct *asd_ha)
+{
+	struct asd_seq_data *seq = &asd_ha->seq;
+	int i;
+
+	for (i = 0; i < seq->num_escbs; i++)
+		seq->escb_arr[i]->tasklet_complete = escb_tasklet_complete;
+
+	ASD_DPRINTK("posting %d escbs\n", i);
+	return asd_post_escb_list(asd_ha, seq->escb_arr[0], seq->num_escbs);
+}
+
+/* ---------- CONTROL PHY ---------- */
+
+#define CONTROL_PHY_STATUS (CURRENT_DEVICE_PRESENT | CURRENT_OOB_DONE   \
+			    | CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \
+			    | CURRENT_OOB_ERROR)
+
+/**
+ * control_phy_tasklet_complete -- tasklet complete for CONTROL PHY ascb
+ * @ascb: pointer to an ascb
+ * @dl: pointer to the done list entry
+ *
+ * This function completes a CONTROL PHY scb and frees the ascb.
+ * A note on LEDs:
+ *  - an LED blinks if there is IO though it,
+ *  - if a device is connected to the LED, it is lit,
+ *  - if no device is connected to the LED, is is dimmed (off).
+ */
+static void control_phy_tasklet_complete(struct asd_ascb *ascb,
+					 struct done_list_struct *dl)
+{
+	struct asd_ha_struct *asd_ha = ascb->ha;
+	struct scb *scb = ascb->scb;
+	struct control_phy *control_phy = &scb->control_phy;
+	u8 phy_id = control_phy->phy_id;
+	struct asd_phy *phy = &ascb->ha->phys[phy_id];
+
+	u8 status     = dl->status_block[0];
+	u8 oob_status = dl->status_block[1];
+	u8 oob_mode   = dl->status_block[2];
+	/* u8 oob_signals= dl->status_block[3]; */
+
+	if (status != 0) {
+		ASD_DPRINTK("%s: phy%d status block opcode:0x%x\n",
+			    __FUNCTION__, phy_id, status);
+		goto out;
+	}
+
+	switch (control_phy->sub_func) {
+	case DISABLE_PHY:
+		asd_ha->hw_prof.enabled_phys &= ~(1 << phy_id);
+		asd_turn_led(asd_ha, phy_id, 0);
+		asd_control_led(asd_ha, phy_id, 0);
+		ASD_DPRINTK("%s: disable phy%d\n", __FUNCTION__, phy_id);
+		break;
+
+	case ENABLE_PHY:
+		asd_control_led(asd_ha, phy_id, 1);
+		if (oob_status & CURRENT_OOB_DONE) {
+			asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
+			get_lrate_mode(phy, oob_mode);
+			asd_turn_led(asd_ha, phy_id, 1);
+			ASD_DPRINTK("%s: phy%d, lrate:0x%x, proto:0x%x\n",
+				    __FUNCTION__, phy_id,phy->sas_phy.linkrate,
+				    phy->sas_phy.iproto);
+		} else if (oob_status & CURRENT_SPINUP_HOLD) {
+			asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
+			asd_turn_led(asd_ha, phy_id, 1);
+			ASD_DPRINTK("%s: phy%d, spinup hold\n", __FUNCTION__,
+				    phy_id);
+		} else if (oob_status & CURRENT_ERR_MASK) {
+			asd_turn_led(asd_ha, phy_id, 0);
+			ASD_DPRINTK("%s: phy%d: error: oob status:0x%02x\n",
+				    __FUNCTION__, phy_id, oob_status);
+		} else if (oob_status & (CURRENT_HOT_PLUG_CNCT
+					 | CURRENT_DEVICE_PRESENT))  {
+			asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
+			asd_turn_led(asd_ha, phy_id, 1);
+			ASD_DPRINTK("%s: phy%d: hot plug or device present\n",
+				    __FUNCTION__, phy_id);
+		} else {
+			asd_ha->hw_prof.enabled_phys |= (1 << phy_id);
+			asd_turn_led(asd_ha, phy_id, 0);
+			ASD_DPRINTK("%s: phy%d: no device present: "
+				    "oob_status:0x%x\n",
+				    __FUNCTION__, phy_id, oob_status);
+		}
+		break;
+	case RELEASE_SPINUP_HOLD:
+	case PHY_NO_OP:
+	case EXECUTE_HARD_RESET:
+		ASD_DPRINTK("%s: phy%d: sub_func:0x%x\n", __FUNCTION__,
+			    phy_id, control_phy->sub_func);
+		/* XXX finish */
+		break;
+	default:
+		ASD_DPRINTK("%s: phy%d: sub_func:0x%x?\n", __FUNCTION__,
+			    phy_id, control_phy->sub_func);
+		break;
+	}
+out:
+	asd_ascb_free(ascb);
+}
+
+static inline void set_speed_mask(u8 *speed_mask, struct asd_phy_desc *pd)
+{
+	/* disable all speeds, then enable defaults */
+	*speed_mask = SAS_SPEED_60_DIS | SAS_SPEED_30_DIS | SAS_SPEED_15_DIS
+		| SATA_SPEED_30_DIS | SATA_SPEED_15_DIS;
+
+	switch (pd->max_sas_lrate) {
+	case PHY_LINKRATE_6:
+		*speed_mask &= ~SAS_SPEED_60_DIS;
+	default:
+	case PHY_LINKRATE_3:
+		*speed_mask &= ~SAS_SPEED_30_DIS;
+	case PHY_LINKRATE_1_5:
+		*speed_mask &= ~SAS_SPEED_15_DIS;
+	}
+
+	switch (pd->min_sas_lrate) {
+	case PHY_LINKRATE_6:
+		*speed_mask |= SAS_SPEED_30_DIS;
+	case PHY_LINKRATE_3:
+		*speed_mask |= SAS_SPEED_15_DIS;
+	default:
+	case PHY_LINKRATE_1_5:
+		/* nothing to do */
+		;
+	}
+
+	switch (pd->max_sata_lrate) {
+	case PHY_LINKRATE_3:
+		*speed_mask &= ~SATA_SPEED_30_DIS;
+	default:
+	case PHY_LINKRATE_1_5:
+		*speed_mask &= ~SATA_SPEED_15_DIS;
+	}
+
+	switch (pd->min_sata_lrate) {
+	case PHY_LINKRATE_3:
+		*speed_mask |= SATA_SPEED_15_DIS;
+	default:
+	case PHY_LINKRATE_1_5:
+		/* nothing to do */
+		;
+	}
+}
+
+/**
+ * asd_build_control_phy -- build a CONTROL PHY SCB
+ * @ascb: pointer to an ascb
+ * @phy_id: phy id to control, integer
+ * @subfunc: subfunction, what to actually to do the phy
+ *
+ * This function builds a CONTROL PHY scb.  No allocation of any kind
+ * is performed. @ascb is allocated with the list function.
+ * The caller can override the ascb->tasklet_complete to point
+ * to its own callback function.  It must call asd_ascb_free()
+ * at its tasklet complete function.
+ * See the default implementation.
+ */
+void asd_build_control_phy(struct asd_ascb *ascb, int phy_id, u8 subfunc)
+{
+	struct asd_phy *phy = &ascb->ha->phys[phy_id];
+	struct scb *scb = ascb->scb;
+	struct control_phy *control_phy = &scb->control_phy;
+
+	scb->header.opcode = CONTROL_PHY;
+	control_phy->phy_id = (u8) phy_id;
+	control_phy->sub_func = subfunc;
+
+	switch (subfunc) {
+	case EXECUTE_HARD_RESET:  /* 0x81 */
+	case ENABLE_PHY:          /* 0x01 */
+		/* decide hot plug delay */
+		control_phy->hot_plug_delay = HOTPLUG_DELAY_TIMEOUT;
+
+		/* decide speed mask */
+		set_speed_mask(&control_phy->speed_mask, phy->phy_desc);
+
+		/* initiator port settings are in the hi nibble */
+		if (phy->sas_phy.role == PHY_ROLE_INITIATOR)
+			control_phy->port_type = SAS_PROTO_ALL << 4;
+		else if (phy->sas_phy.role == PHY_ROLE_TARGET)
+			control_phy->port_type = SAS_PROTO_ALL;
+		else
+			control_phy->port_type =
+				(SAS_PROTO_ALL << 4) | SAS_PROTO_ALL;
+
+		/* link reset retries, this should be nominal */
+		control_phy->link_reset_retries = 10;
+
+	case RELEASE_SPINUP_HOLD: /* 0x02 */
+		/* decide the func_mask */
+		control_phy->func_mask = FUNCTION_MASK_DEFAULT;
+		if (phy->phy_desc->flags & ASD_SATA_SPINUP_HOLD)
+			control_phy->func_mask &= ~SPINUP_HOLD_DIS;
+		else
+			control_phy->func_mask |= SPINUP_HOLD_DIS;
+	}
+
+	control_phy->conn_handle = cpu_to_le16(0xFFFF);
+
+	ascb->tasklet_complete = control_phy_tasklet_complete;
+}
+
+/* ---------- INITIATE LINK ADM TASK ---------- */
+
+static void link_adm_tasklet_complete(struct asd_ascb *ascb,
+				      struct done_list_struct *dl)
+{
+	u8 opcode = dl->opcode;
+	struct initiate_link_adm *link_adm = &ascb->scb->link_adm;
+	u8 phy_id = link_adm->phy_id;
+
+	if (opcode != TC_NO_ERROR) {
+		asd_printk("phy%d: link adm task 0x%x completed with error "
+			   "0x%x\n", phy_id, link_adm->sub_func, opcode);
+	}
+	ASD_DPRINTK("phy%d: link adm task 0x%x: 0x%x\n",
+		    phy_id, link_adm->sub_func, opcode);
+
+	asd_ascb_free(ascb);
+}
+
+void asd_build_initiate_link_adm_task(struct asd_ascb *ascb, int phy_id,
+				      u8 subfunc)
+{
+	struct scb *scb = ascb->scb;
+	struct initiate_link_adm *link_adm = &scb->link_adm;
+
+	scb->header.opcode = INITIATE_LINK_ADM_TASK;
+
+	link_adm->phy_id = phy_id;
+	link_adm->sub_func = subfunc;
+	link_adm->conn_handle = cpu_to_le16(0xFFFF);
+
+	ascb->tasklet_complete = link_adm_tasklet_complete;
+}
+
+/* ---------- SCB timer ---------- */
+
+/**
+ * asd_ascb_timedout -- called when a pending SCB's timer has expired
+ * @data: unsigned long, a pointer to the ascb in question
+ *
+ * This is the default timeout function which does the most necessary.
+ * Upper layers can implement their own timeout function, say to free
+ * resources they have with this SCB, and then call this one at the
+ * end of their timeout function.  To do this, one should initialize
+ * the ascb->timer.{function, data, expires} prior to calling the post
+ * funcion.  The timer is started by the post function.
+ */
+void asd_ascb_timedout(unsigned long data)
+{
+	struct asd_ascb *ascb = (void *) data;
+	struct asd_seq_data *seq = &ascb->ha->seq;
+	unsigned long flags;
+
+	ASD_DPRINTK("scb:0x%x timed out\n", ascb->scb->header.opcode);
+
+	spin_lock_irqsave(&seq->pend_q_lock, flags);
+	seq->pending--;
+	list_del_init(&ascb->list);
+	spin_unlock_irqrestore(&seq->pend_q_lock, flags);
+
+	asd_ascb_free(ascb);
+}
+
+/* ---------- CONTROL PHY ---------- */
+
+/* Given the spec value, return a driver value. */
+static const int phy_func_table[] = {
+	[PHY_FUNC_NOP]        = PHY_NO_OP,
+	[PHY_FUNC_LINK_RESET] = ENABLE_PHY,
+	[PHY_FUNC_HARD_RESET] = EXECUTE_HARD_RESET,
+	[PHY_FUNC_DISABLE]    = DISABLE_PHY,
+	[PHY_FUNC_RELEASE_SPINUP_HOLD] = RELEASE_SPINUP_HOLD,
+};
+
+int asd_control_phy(struct asd_sas_phy *phy, enum phy_func func)
+{
+	struct asd_ha_struct *asd_ha = phy->ha->lldd_ha;
+	struct asd_ascb *ascb;
+	int res = 1;
+
+	if (func == PHY_FUNC_CLEAR_ERROR_LOG)
+		return -ENOSYS;
+
+	ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL);
+	if (!ascb)
+		return -ENOMEM;
+
+	asd_build_control_phy(ascb, phy->id, phy_func_table[func]);
+	res = asd_post_ascb_list(asd_ha, ascb , 1);
+	if (res)
+		asd_ascb_free(ascb);
+
+	return res;
+}