Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 987 insertions, 0 deletions

diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c
new file mode 100644
index 000000000000..4c3bb7bb8420
--- /dev/null
+++ b/drivers/scsi/aic7xxx/aic79xx_pci.c
@@ -0,0 +1,987 @@
+/*
+ * Product specific probe and attach routines for:
+ *	aic7901 and aic7902 SCSI controllers
+ *
+ * Copyright (c) 1994-2001 Justin T. Gibbs.
+ * Copyright (c) 2000-2002 Adaptec Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx_pci.c#77 $
+ *
+ * $FreeBSD$
+ */
+
+#ifdef __linux__
+#include "aic79xx_osm.h"
+#include "aic79xx_inline.h"
+#else
+#include <dev/aic7xxx/aic79xx_osm.h>
+#include <dev/aic7xxx/aic79xx_inline.h>
+#endif
+
+#include "aic79xx_pci.h"
+
+static __inline uint64_t
+ahd_compose_id(u_int device, u_int vendor, u_int subdevice, u_int subvendor)
+{
+	uint64_t id;
+
+	id = subvendor
+	   | (subdevice << 16)
+	   | ((uint64_t)vendor << 32)
+	   | ((uint64_t)device << 48);
+
+	return (id);
+}
+
+#define ID_AIC7902_PCI_REV_A4		0x3
+#define ID_AIC7902_PCI_REV_B0		0x10
+#define SUBID_HP			0x0E11
+
+#define DEVID_9005_HOSTRAID(id) ((id) & 0x80)
+
+#define DEVID_9005_TYPE(id) ((id) & 0xF)
+#define		DEVID_9005_TYPE_HBA		0x0	/* Standard Card */
+#define		DEVID_9005_TYPE_HBA_2EXT	0x1	/* 2 External Ports */
+#define		DEVID_9005_TYPE_IROC		0x8	/* Raid(0,1,10) Card */
+#define		DEVID_9005_TYPE_MB		0xF	/* On Motherboard */
+
+#define DEVID_9005_MFUNC(id) ((id) & 0x10)
+
+#define DEVID_9005_PACKETIZED(id) ((id) & 0x8000)
+
+#define SUBID_9005_TYPE(id) ((id) & 0xF)
+#define		SUBID_9005_TYPE_HBA		0x0	/* Standard Card */
+#define		SUBID_9005_TYPE_MB		0xF	/* On Motherboard */
+
+#define SUBID_9005_AUTOTERM(id)	(((id) & 0x10) == 0)
+
+#define SUBID_9005_LEGACYCONN_FUNC(id) ((id) & 0x20)
+
+#define SUBID_9005_SEEPTYPE(id) ((id) & 0x0C0) >> 6)
+#define		SUBID_9005_SEEPTYPE_NONE	0x0
+#define		SUBID_9005_SEEPTYPE_4K		0x1
+
+static ahd_device_setup_t ahd_aic7901_setup;
+static ahd_device_setup_t ahd_aic7901A_setup;
+static ahd_device_setup_t ahd_aic7902_setup;
+static ahd_device_setup_t ahd_aic790X_setup;
+
+struct ahd_pci_identity ahd_pci_ident_table [] =
+{
+	/* aic7901 based controllers */
+	{
+		ID_AHA_29320A,
+		ID_ALL_MASK,
+		"Adaptec 29320A Ultra320 SCSI adapter",
+		ahd_aic7901_setup
+	},
+	{
+		ID_AHA_29320ALP,
+		ID_ALL_MASK,
+		"Adaptec 29320ALP Ultra320 SCSI adapter",
+		ahd_aic7901_setup
+	},
+	/* aic7902 based controllers */	
+	{
+		ID_AHA_29320,
+		ID_ALL_MASK,
+		"Adaptec 29320 Ultra320 SCSI adapter",
+		ahd_aic7902_setup
+	},
+	{
+		ID_AHA_29320B,
+		ID_ALL_MASK,
+		"Adaptec 29320B Ultra320 SCSI adapter",
+		ahd_aic7902_setup
+	},
+	{
+		ID_AHA_29320LP,
+		ID_ALL_MASK,
+		"Adaptec 29320LP Ultra320 SCSI adapter",
+		ahd_aic7901A_setup
+	},
+	{
+		ID_AHA_39320,
+		ID_ALL_MASK,
+		"Adaptec 39320 Ultra320 SCSI adapter",
+		ahd_aic7902_setup
+	},
+	{
+		ID_AHA_39320_B,
+		ID_ALL_MASK,
+		"Adaptec 39320 Ultra320 SCSI adapter",
+		ahd_aic7902_setup
+	},
+	{
+		ID_AHA_39320A,
+		ID_ALL_MASK,
+		"Adaptec 39320A Ultra320 SCSI adapter",
+		ahd_aic7902_setup
+	},
+	{
+		ID_AHA_39320D,
+		ID_ALL_MASK,
+		"Adaptec 39320D Ultra320 SCSI adapter",
+		ahd_aic7902_setup
+	},
+	{
+		ID_AHA_39320D_HP,
+		ID_ALL_MASK,
+		"Adaptec (HP OEM) 39320D Ultra320 SCSI adapter",
+		ahd_aic7902_setup
+	},
+	{
+		ID_AHA_39320D_B,
+		ID_ALL_MASK,
+		"Adaptec 39320D Ultra320 SCSI adapter",
+		ahd_aic7902_setup
+	},
+	{
+		ID_AHA_39320D_B_HP,
+		ID_ALL_MASK,
+		"Adaptec (HP OEM) 39320D Ultra320 SCSI adapter",
+		ahd_aic7902_setup
+	},
+	/* Generic chip probes for devices we don't know 'exactly' */
+	{
+		ID_AIC7901 & ID_9005_GENERIC_MASK,
+		ID_9005_GENERIC_MASK,
+		"Adaptec AIC7901 Ultra320 SCSI adapter",
+		ahd_aic7901_setup
+	},
+	{
+		ID_AIC7901A & ID_DEV_VENDOR_MASK,
+		ID_DEV_VENDOR_MASK,
+		"Adaptec AIC7901A Ultra320 SCSI adapter",
+		ahd_aic7901A_setup
+	},
+	{
+		ID_AIC7902 & ID_9005_GENERIC_MASK,
+		ID_9005_GENERIC_MASK,
+		"Adaptec AIC7902 Ultra320 SCSI adapter",
+		ahd_aic7902_setup
+	}
+};
+
+const u_int ahd_num_pci_devs = NUM_ELEMENTS(ahd_pci_ident_table);
+		
+#define	DEVCONFIG		0x40
+#define		PCIXINITPAT	0x0000E000ul
+#define			PCIXINIT_PCI33_66	0x0000E000ul
+#define			PCIXINIT_PCIX50_66	0x0000C000ul
+#define			PCIXINIT_PCIX66_100	0x0000A000ul
+#define			PCIXINIT_PCIX100_133	0x00008000ul
+#define	PCI_BUS_MODES_INDEX(devconfig)	\
+	(((devconfig) & PCIXINITPAT) >> 13)
+static const char *pci_bus_modes[] =
+{
+	"PCI bus mode unknown",
+	"PCI bus mode unknown",
+	"PCI bus mode unknown",
+	"PCI bus mode unknown",
+	"PCI-X 101-133Mhz",
+	"PCI-X 67-100Mhz",
+	"PCI-X 50-66Mhz",
+	"PCI 33 or 66Mhz"
+};
+
+#define		TESTMODE	0x00000800ul
+#define		IRDY_RST	0x00000200ul
+#define		FRAME_RST	0x00000100ul
+#define		PCI64BIT	0x00000080ul
+#define		MRDCEN		0x00000040ul
+#define		ENDIANSEL	0x00000020ul
+#define		MIXQWENDIANEN	0x00000008ul
+#define		DACEN		0x00000004ul
+#define		STPWLEVEL	0x00000002ul
+#define		QWENDIANSEL	0x00000001ul
+
+#define	DEVCONFIG1		0x44
+#define		PREQDIS		0x01
+
+#define	CSIZE_LATTIME		0x0c
+#define		CACHESIZE	0x000000fful
+#define		LATTIME		0x0000ff00ul
+
+static int	ahd_check_extport(struct ahd_softc *ahd);
+static void	ahd_configure_termination(struct ahd_softc *ahd,
+					  u_int adapter_control);
+static void	ahd_pci_split_intr(struct ahd_softc *ahd, u_int intstat);
+
+struct ahd_pci_identity *
+ahd_find_pci_device(ahd_dev_softc_t pci)
+{
+	uint64_t  full_id;
+	uint16_t  device;
+	uint16_t  vendor;
+	uint16_t  subdevice;
+	uint16_t  subvendor;
+	struct	  ahd_pci_identity *entry;
+	u_int	  i;
+
+	vendor = ahd_pci_read_config(pci, PCIR_DEVVENDOR, /*bytes*/2);
+	device = ahd_pci_read_config(pci, PCIR_DEVICE, /*bytes*/2);
+	subvendor = ahd_pci_read_config(pci, PCIR_SUBVEND_0, /*bytes*/2);
+	subdevice = ahd_pci_read_config(pci, PCIR_SUBDEV_0, /*bytes*/2);
+	full_id = ahd_compose_id(device,
+				 vendor,
+				 subdevice,
+				 subvendor);
+
+	/*
+	 * Controllers, mask out the IROC/HostRAID bit
+	 */
+	
+	full_id &= ID_ALL_IROC_MASK;
+
+	for (i = 0; i < ahd_num_pci_devs; i++) {
+		entry = &ahd_pci_ident_table[i];
+		if (entry->full_id == (full_id & entry->id_mask)) {
+			/* Honor exclusion entries. */
+			if (entry->name == NULL)
+				return (NULL);
+			return (entry);
+		}
+	}
+	return (NULL);
+}
+
+int
+ahd_pci_config(struct ahd_softc *ahd, struct ahd_pci_identity *entry)
+{
+	struct scb_data *shared_scb_data;
+	u_long		 l;
+	u_int		 command;
+	uint32_t	 devconfig;
+	uint16_t	 subvendor; 
+	int		 error;
+
+	shared_scb_data = NULL;
+	ahd->description = entry->name;
+	/*
+	 * Record if this is an HP board.
+	 */
+	subvendor = ahd_pci_read_config(ahd->dev_softc,
+					PCIR_SUBVEND_0, /*bytes*/2);
+	if (subvendor == SUBID_HP)
+		ahd->flags |= AHD_HP_BOARD;
+
+	error = entry->setup(ahd);
+	if (error != 0)
+		return (error);
+	
+	devconfig = ahd_pci_read_config(ahd->dev_softc, DEVCONFIG, /*bytes*/4);
+	if ((devconfig & PCIXINITPAT) == PCIXINIT_PCI33_66) {
+		ahd->chip |= AHD_PCI;
+		/* Disable PCIX workarounds when running in PCI mode. */
+		ahd->bugs &= ~AHD_PCIX_BUG_MASK;
+	} else {
+		ahd->chip |= AHD_PCIX;
+	}
+	ahd->bus_description = pci_bus_modes[PCI_BUS_MODES_INDEX(devconfig)];
+
+	ahd_power_state_change(ahd, AHD_POWER_STATE_D0);
+
+	error = ahd_pci_map_registers(ahd);
+	if (error != 0)
+		return (error);
+
+	/*
+	 * If we need to support high memory, enable dual
+	 * address cycles.  This bit must be set to enable
+	 * high address bit generation even if we are on a
+	 * 64bit bus (PCI64BIT set in devconfig).
+	 */
+	if ((ahd->flags & (AHD_39BIT_ADDRESSING|AHD_64BIT_ADDRESSING)) != 0) {
+		uint32_t devconfig;
+
+		if (bootverbose)
+			printf("%s: Enabling 39Bit Addressing\n",
+			       ahd_name(ahd));
+		devconfig = ahd_pci_read_config(ahd->dev_softc,
+						DEVCONFIG, /*bytes*/4);
+		devconfig |= DACEN;
+		ahd_pci_write_config(ahd->dev_softc, DEVCONFIG,
+				     devconfig, /*bytes*/4);
+	}
+	
+	/* Ensure busmastering is enabled */
+	command = ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/2);
+	command |= PCIM_CMD_BUSMASTEREN;
+	ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND, command, /*bytes*/2);
+
+	error = ahd_softc_init(ahd);
+	if (error != 0)
+		return (error);
+
+	ahd->bus_intr = ahd_pci_intr;
+
+	error = ahd_reset(ahd, /*reinit*/FALSE);
+	if (error != 0)
+		return (ENXIO);
+
+	ahd->pci_cachesize =
+	    ahd_pci_read_config(ahd->dev_softc, CSIZE_LATTIME,
+				/*bytes*/1) & CACHESIZE;
+	ahd->pci_cachesize *= 4;
+
+	ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
+	/* See if we have a SEEPROM and perform auto-term */
+	error = ahd_check_extport(ahd);
+	if (error != 0)
+		return (error);
+
+	/* Core initialization */
+	error = ahd_init(ahd);
+	if (error != 0)
+		return (error);
+
+	/*
+	 * Allow interrupts now that we are completely setup.
+	 */
+	error = ahd_pci_map_int(ahd);
+	if (error != 0)
+		return (error);
+
+	ahd_list_lock(&l);
+	/*
+	 * Link this softc in with all other ahd instances.
+	 */
+	ahd_softc_insert(ahd);
+	ahd_list_unlock(&l);
+	return (0);
+}
+
+/*
+ * Perform some simple tests that should catch situations where
+ * our registers are invalidly mapped.
+ */
+int
+ahd_pci_test_register_access(struct ahd_softc *ahd)
+{
+	uint32_t cmd;
+	u_int	 targpcistat;
+	u_int	 pci_status1;
+	int	 error;
+	uint8_t	 hcntrl;
+
+	error = EIO;
+
+	/*
+	 * Enable PCI error interrupt status, but suppress NMIs
+	 * generated by SERR raised due to target aborts.
+	 */
+	cmd = ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/2);
+	ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND,
+			     cmd & ~PCIM_CMD_SERRESPEN, /*bytes*/2);
+
+	/*
+	 * First a simple test to see if any
+	 * registers can be read.  Reading
+	 * HCNTRL has no side effects and has
+	 * at least one bit that is guaranteed to
+	 * be zero so it is a good register to
+	 * use for this test.
+	 */
+	hcntrl = ahd_inb(ahd, HCNTRL);
+	if (hcntrl == 0xFF)
+		goto fail;
+
+	/*
+	 * Next create a situation where write combining
+	 * or read prefetching could be initiated by the
+	 * CPU or host bridge.  Our device does not support
+	 * either, so look for data corruption and/or flaged
+	 * PCI errors.  First pause without causing another
+	 * chip reset.
+	 */
+	hcntrl &= ~CHIPRST;
+	ahd_outb(ahd, HCNTRL, hcntrl|PAUSE);
+	while (ahd_is_paused(ahd) == 0)
+		;
+
+	/* Clear any PCI errors that occurred before our driver attached. */
+	ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
+	targpcistat = ahd_inb(ahd, TARGPCISTAT);
+	ahd_outb(ahd, TARGPCISTAT, targpcistat);
+	pci_status1 = ahd_pci_read_config(ahd->dev_softc,
+					  PCIR_STATUS + 1, /*bytes*/1);
+	ahd_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1,
+			     pci_status1, /*bytes*/1);
+	ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
+	ahd_outb(ahd, CLRINT, CLRPCIINT);
+
+	ahd_outb(ahd, SEQCTL0, PERRORDIS);
+	ahd_outl(ahd, SRAM_BASE, 0x5aa555aa);
+	if (ahd_inl(ahd, SRAM_BASE) != 0x5aa555aa)
+		goto fail;
+
+	if ((ahd_inb(ahd, INTSTAT) & PCIINT) != 0) {
+		u_int targpcistat;
+
+		ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
+		targpcistat = ahd_inb(ahd, TARGPCISTAT);
+		if ((targpcistat & STA) != 0)
+			goto fail;
+	}
+
+	error = 0;
+
+fail:
+	if ((ahd_inb(ahd, INTSTAT) & PCIINT) != 0) {
+
+		ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
+		targpcistat = ahd_inb(ahd, TARGPCISTAT);
+
+		/* Silently clear any latched errors. */
+		ahd_outb(ahd, TARGPCISTAT, targpcistat);
+		pci_status1 = ahd_pci_read_config(ahd->dev_softc,
+						  PCIR_STATUS + 1, /*bytes*/1);
+		ahd_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1,
+				     pci_status1, /*bytes*/1);
+		ahd_outb(ahd, CLRINT, CLRPCIINT);
+	}
+	ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS);
+	ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND, cmd, /*bytes*/2);
+	return (error);
+}
+
+/*
+ * Check the external port logic for a serial eeprom
+ * and termination/cable detection contrls.
+ */
+static int
+ahd_check_extport(struct ahd_softc *ahd)
+{
+	struct	vpd_config vpd;
+	struct	seeprom_config *sc;
+	u_int	adapter_control;
+	int	have_seeprom;
+	int	error;
+
+	sc = ahd->seep_config;
+	have_seeprom = ahd_acquire_seeprom(ahd);
+	if (have_seeprom) {
+		u_int start_addr;
+
+		/*
+		 * Fetch VPD for this function and parse it.
+		 */
+		if (bootverbose) 
+			printf("%s: Reading VPD from SEEPROM...",
+			       ahd_name(ahd));
+
+		/* Address is always in units of 16bit words */
+		start_addr = ((2 * sizeof(*sc))
+			    + (sizeof(vpd) * (ahd->channel - 'A'))) / 2;
+
+		error = ahd_read_seeprom(ahd, (uint16_t *)&vpd,
+					 start_addr, sizeof(vpd)/2,
+					 /*bytestream*/TRUE);
+		if (error == 0)
+			error = ahd_parse_vpddata(ahd, &vpd);
+		if (bootverbose) 
+			printf("%s: VPD parsing %s\n",
+			       ahd_name(ahd),
+			       error == 0 ? "successful" : "failed");
+
+		if (bootverbose) 
+			printf("%s: Reading SEEPROM...", ahd_name(ahd));
+
+		/* Address is always in units of 16bit words */
+		start_addr = (sizeof(*sc) / 2) * (ahd->channel - 'A');
+
+		error = ahd_read_seeprom(ahd, (uint16_t *)sc,
+					 start_addr, sizeof(*sc)/2,
+					 /*bytestream*/FALSE);
+
+		if (error != 0) {
+			printf("Unable to read SEEPROM\n");
+			have_seeprom = 0;
+		} else {
+			have_seeprom = ahd_verify_cksum(sc);
+
+			if (bootverbose) {
+				if (have_seeprom == 0)
+					printf ("checksum error\n");
+				else
+					printf ("done.\n");
+			}
+		}
+		ahd_release_seeprom(ahd);
+	}
+
+	if (!have_seeprom) {
+		u_int	  nvram_scb;
+
+		/*
+		 * Pull scratch ram settings and treat them as
+		 * if they are the contents of an seeprom if
+		 * the 'ADPT', 'BIOS', or 'ASPI' signature is found
+		 * in SCB 0xFF.  We manually compose the data as 16bit
+		 * values to avoid endian issues.
+		 */
+		ahd_set_scbptr(ahd, 0xFF);
+		nvram_scb = ahd_inb_scbram(ahd, SCB_BASE + NVRAM_SCB_OFFSET);
+		if (nvram_scb != 0xFF
+		 && ((ahd_inb_scbram(ahd, SCB_BASE + 0) == 'A'
+		   && ahd_inb_scbram(ahd, SCB_BASE + 1) == 'D'
+		   && ahd_inb_scbram(ahd, SCB_BASE + 2) == 'P'
+		   && ahd_inb_scbram(ahd, SCB_BASE + 3) == 'T')
+		  || (ahd_inb_scbram(ahd, SCB_BASE + 0) == 'B'
+		   && ahd_inb_scbram(ahd, SCB_BASE + 1) == 'I'
+		   && ahd_inb_scbram(ahd, SCB_BASE + 2) == 'O'
+		   && ahd_inb_scbram(ahd, SCB_BASE + 3) == 'S')
+		  || (ahd_inb_scbram(ahd, SCB_BASE + 0) == 'A'
+		   && ahd_inb_scbram(ahd, SCB_BASE + 1) == 'S'
+		   && ahd_inb_scbram(ahd, SCB_BASE + 2) == 'P'
+		   && ahd_inb_scbram(ahd, SCB_BASE + 3) == 'I'))) {
+			uint16_t *sc_data;
+			int	  i;
+
+			ahd_set_scbptr(ahd, nvram_scb);
+			sc_data = (uint16_t *)sc;
+			for (i = 0; i < 64; i += 2)
+				*sc_data++ = ahd_inw_scbram(ahd, SCB_BASE+i);
+			have_seeprom = ahd_verify_cksum(sc);
+			if (have_seeprom)
+				ahd->flags |= AHD_SCB_CONFIG_USED;
+		}
+	}
+
+#if AHD_DEBUG
+	if (have_seeprom != 0
+	 && (ahd_debug & AHD_DUMP_SEEPROM) != 0) {
+		uint16_t *sc_data;
+		int	  i;
+
+		printf("%s: Seeprom Contents:", ahd_name(ahd));
+		sc_data = (uint16_t *)sc;
+		for (i = 0; i < (sizeof(*sc)); i += 2)
+			printf("\n\t0x%.4x", sc_data[i]);
+		printf("\n");
+	}
+#endif
+
+	if (!have_seeprom) {
+		if (bootverbose)
+			printf("%s: No SEEPROM available.\n", ahd_name(ahd));
+		ahd->flags |= AHD_USEDEFAULTS;
+		error = ahd_default_config(ahd);
+		adapter_control = CFAUTOTERM|CFSEAUTOTERM;
+		free(ahd->seep_config, M_DEVBUF);
+		ahd->seep_config = NULL;
+	} else {
+		error = ahd_parse_cfgdata(ahd, sc);
+		adapter_control = sc->adapter_control;
+	}
+	if (error != 0)
+		return (error);
+
+	ahd_configure_termination(ahd, adapter_control);
+
+	return (0);
+}
+
+static void
+ahd_configure_termination(struct ahd_softc *ahd, u_int adapter_control)
+{
+	int	 error;
+	u_int	 sxfrctl1;
+	uint8_t	 termctl;
+	uint32_t devconfig;
+
+	devconfig = ahd_pci_read_config(ahd->dev_softc, DEVCONFIG, /*bytes*/4);
+	devconfig &= ~STPWLEVEL;
+	if ((ahd->flags & AHD_STPWLEVEL_A) != 0)
+		devconfig |= STPWLEVEL;
+	if (bootverbose)
+		printf("%s: STPWLEVEL is %s\n",
+		       ahd_name(ahd), (devconfig & STPWLEVEL) ? "on" : "off");
+	ahd_pci_write_config(ahd->dev_softc, DEVCONFIG, devconfig, /*bytes*/4);
+ 
+	/* Make sure current sensing is off. */
+	if ((ahd->flags & AHD_CURRENT_SENSING) != 0) {
+		(void)ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 0);
+	}
+
+	/*
+	 * Read to sense.  Write to set.
+	 */
+	error = ahd_read_flexport(ahd, FLXADDR_TERMCTL, &termctl);
+	if ((adapter_control & CFAUTOTERM) == 0) {
+		if (bootverbose)
+			printf("%s: Manual Primary Termination\n",
+			       ahd_name(ahd));
+		termctl &= ~(FLX_TERMCTL_ENPRILOW|FLX_TERMCTL_ENPRIHIGH);
+		if ((adapter_control & CFSTERM) != 0)
+			termctl |= FLX_TERMCTL_ENPRILOW;
+		if ((adapter_control & CFWSTERM) != 0)
+			termctl |= FLX_TERMCTL_ENPRIHIGH;
+	} else if (error != 0) {
+		printf("%s: Primary Auto-Term Sensing failed! "
+		       "Using Defaults.\n", ahd_name(ahd));
+		termctl = FLX_TERMCTL_ENPRILOW|FLX_TERMCTL_ENPRIHIGH;
+	}
+
+	if ((adapter_control & CFSEAUTOTERM) == 0) {
+		if (bootverbose)
+			printf("%s: Manual Secondary Termination\n",
+			       ahd_name(ahd));
+		termctl &= ~(FLX_TERMCTL_ENSECLOW|FLX_TERMCTL_ENSECHIGH);
+		if ((adapter_control & CFSELOWTERM) != 0)
+			termctl |= FLX_TERMCTL_ENSECLOW;
+		if ((adapter_control & CFSEHIGHTERM) != 0)
+			termctl |= FLX_TERMCTL_ENSECHIGH;
+	} else if (error != 0) {
+		printf("%s: Secondary Auto-Term Sensing failed! "
+		       "Using Defaults.\n", ahd_name(ahd));
+		termctl |= FLX_TERMCTL_ENSECLOW|FLX_TERMCTL_ENSECHIGH;
+	}
+
+	/*
+	 * Now set the termination based on what we found.
+	 */
+	sxfrctl1 = ahd_inb(ahd, SXFRCTL1) & ~STPWEN;
+	if ((termctl & FLX_TERMCTL_ENPRILOW) != 0) {
+		ahd->flags |= AHD_TERM_ENB_A;
+		sxfrctl1 |= STPWEN;
+	}
+	/* Must set the latch once in order to be effective. */
+	ahd_outb(ahd, SXFRCTL1, sxfrctl1|STPWEN);
+	ahd_outb(ahd, SXFRCTL1, sxfrctl1);
+
+	error = ahd_write_flexport(ahd, FLXADDR_TERMCTL, termctl);
+	if (error != 0) {
+		printf("%s: Unable to set termination settings!\n",
+		       ahd_name(ahd));
+	} else if (bootverbose) {
+		printf("%s: Primary High byte termination %sabled\n",
+		       ahd_name(ahd),
+		       (termctl & FLX_TERMCTL_ENPRIHIGH) ? "En" : "Dis");
+
+		printf("%s: Primary Low byte termination %sabled\n",
+		       ahd_name(ahd),
+		       (termctl & FLX_TERMCTL_ENPRILOW) ? "En" : "Dis");
+
+		printf("%s: Secondary High byte termination %sabled\n",
+		       ahd_name(ahd),
+		       (termctl & FLX_TERMCTL_ENSECHIGH) ? "En" : "Dis");
+
+		printf("%s: Secondary Low byte termination %sabled\n",
+		       ahd_name(ahd),
+		       (termctl & FLX_TERMCTL_ENSECLOW) ? "En" : "Dis");
+	}
+	return;
+}
+
+#define	DPE	0x80
+#define SSE	0x40
+#define	RMA	0x20
+#define	RTA	0x10
+#define STA	0x08
+#define DPR	0x01
+
+static const char *split_status_source[] =
+{
+	"DFF0",
+	"DFF1",
+	"OVLY",
+	"CMC",
+};
+
+static const char *pci_status_source[] =
+{
+	"DFF0",
+	"DFF1",
+	"SG",
+	"CMC",
+	"OVLY",
+	"NONE",
+	"MSI",
+	"TARG"
+};
+
+static const char *split_status_strings[] =
+{
+	"%s: Received split response in %s.\n",
+	"%s: Received split completion error message in %s\n",
+	"%s: Receive overrun in %s\n",
+	"%s: Count not complete in %s\n",
+	"%s: Split completion data bucket in %s\n",
+	"%s: Split completion address error in %s\n",
+	"%s: Split completion byte count error in %s\n",
+	"%s: Signaled Target-abort to early terminate a split in %s\n"
+};
+
+static const char *pci_status_strings[] =
+{
+	"%s: Data Parity Error has been reported via PERR# in %s\n",
+	"%s: Target initial wait state error in %s\n",
+	"%s: Split completion read data parity error in %s\n",
+	"%s: Split completion address attribute parity error in %s\n",
+	"%s: Received a Target Abort in %s\n",
+	"%s: Received a Master Abort in %s\n",
+	"%s: Signal System Error Detected in %s\n",
+	"%s: Address or Write Phase Parity Error Detected in %s.\n"
+};
+
+void
+ahd_pci_intr(struct ahd_softc *ahd)
+{
+	uint8_t		pci_status[8];
+	ahd_mode_state	saved_modes;
+	u_int		pci_status1;
+	u_int		intstat;
+	u_int		i;
+	u_int		reg;
+	
+	intstat = ahd_inb(ahd, INTSTAT);
+
+	if ((intstat & SPLTINT) != 0)
+		ahd_pci_split_intr(ahd, intstat);
+
+	if ((intstat & PCIINT) == 0)
+		return;
+
+	printf("%s: PCI error Interrupt\n", ahd_name(ahd));
+	saved_modes = ahd_save_modes(ahd);
+	ahd_dump_card_state(ahd);
+	ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
+	for (i = 0, reg = DF0PCISTAT; i < 8; i++, reg++) {
+
+		if (i == 5)
+			continue;
+		pci_status[i] = ahd_inb(ahd, reg);
+		/* Clear latched errors.  So our interrupt deasserts. */
+		ahd_outb(ahd, reg, pci_status[i]);
+	}
+
+	for (i = 0; i < 8; i++) {
+		u_int bit;
+	
+		if (i == 5)
+			continue;
+
+		for (bit = 0; bit < 8; bit++) {
+
+			if ((pci_status[i] & (0x1 << bit)) != 0) {
+				static const char *s;
+
+				s = pci_status_strings[bit];
+				if (i == 7/*TARG*/ && bit == 3)
+					s = "%s: Signaled Target Abort\n";
+				printf(s, ahd_name(ahd), pci_status_source[i]);
+			}
+		}	
+	}
+	pci_status1 = ahd_pci_read_config(ahd->dev_softc,
+					  PCIR_STATUS + 1, /*bytes*/1);
+	ahd_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1,
+			     pci_status1, /*bytes*/1);
+	ahd_restore_modes(ahd, saved_modes);
+	ahd_outb(ahd, CLRINT, CLRPCIINT);
+	ahd_unpause(ahd);
+}
+
+static void
+ahd_pci_split_intr(struct ahd_softc *ahd, u_int intstat)
+{
+	uint8_t		split_status[4];
+	uint8_t		split_status1[4];
+	uint8_t		sg_split_status[2];
+	uint8_t		sg_split_status1[2];
+	ahd_mode_state	saved_modes;
+	u_int		i;
+	uint16_t	pcix_status;
+
+	/*
+	 * Check for splits in all modes.  Modes 0 and 1
+	 * additionally have SG engine splits to look at.
+	 */
+	pcix_status = ahd_pci_read_config(ahd->dev_softc, PCIXR_STATUS,
+					  /*bytes*/2);
+	printf("%s: PCI Split Interrupt - PCI-X status = 0x%x\n",
+	       ahd_name(ahd), pcix_status);
+	saved_modes = ahd_save_modes(ahd);
+	for (i = 0; i < 4; i++) {
+		ahd_set_modes(ahd, i, i);
+
+		split_status[i] = ahd_inb(ahd, DCHSPLTSTAT0);
+		split_status1[i] = ahd_inb(ahd, DCHSPLTSTAT1);
+		/* Clear latched errors.  So our interrupt deasserts. */
+		ahd_outb(ahd, DCHSPLTSTAT0, split_status[i]);
+		ahd_outb(ahd, DCHSPLTSTAT1, split_status1[i]);
+		if (i > 1)
+			continue;
+		sg_split_status[i] = ahd_inb(ahd, SGSPLTSTAT0);
+		sg_split_status1[i] = ahd_inb(ahd, SGSPLTSTAT1);
+		/* Clear latched errors.  So our interrupt deasserts. */
+		ahd_outb(ahd, SGSPLTSTAT0, sg_split_status[i]);
+		ahd_outb(ahd, SGSPLTSTAT1, sg_split_status1[i]);
+	}
+
+	for (i = 0; i < 4; i++) {
+		u_int bit;
+
+		for (bit = 0; bit < 8; bit++) {
+
+			if ((split_status[i] & (0x1 << bit)) != 0) {
+				static const char *s;
+
+				s = split_status_strings[bit];
+				printf(s, ahd_name(ahd),
+				       split_status_source[i]);
+			}
+
+			if (i > 1)
+				continue;
+
+			if ((sg_split_status[i] & (0x1 << bit)) != 0) {
+				static const char *s;
+
+				s = split_status_strings[bit];
+				printf(s, ahd_name(ahd), "SG");
+			}
+		}
+	}
+	/*
+	 * Clear PCI-X status bits.
+	 */
+	ahd_pci_write_config(ahd->dev_softc, PCIXR_STATUS,
+			     pcix_status, /*bytes*/2);
+	ahd_outb(ahd, CLRINT, CLRSPLTINT);
+	ahd_restore_modes(ahd, saved_modes);
+}
+
+static int
+ahd_aic7901_setup(struct ahd_softc *ahd)
+{
+
+	ahd->chip = AHD_AIC7901;
+	ahd->features = AHD_AIC7901_FE;
+	return (ahd_aic790X_setup(ahd));
+}
+
+static int
+ahd_aic7901A_setup(struct ahd_softc *ahd)
+{
+
+	ahd->chip = AHD_AIC7901A;
+	ahd->features = AHD_AIC7901A_FE;
+	return (ahd_aic790X_setup(ahd));
+}
+
+static int
+ahd_aic7902_setup(struct ahd_softc *ahd)
+{
+	ahd->chip = AHD_AIC7902;
+	ahd->features = AHD_AIC7902_FE;
+	return (ahd_aic790X_setup(ahd));
+}
+
+static int
+ahd_aic790X_setup(struct ahd_softc *ahd)
+{
+	ahd_dev_softc_t pci;
+	u_int rev;
+
+	pci = ahd->dev_softc;
+	rev = ahd_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
+	if (rev < ID_AIC7902_PCI_REV_A4) {
+		printf("%s: Unable to attach to unsupported chip revision %d\n",
+		       ahd_name(ahd), rev);
+		ahd_pci_write_config(pci, PCIR_COMMAND, 0, /*bytes*/2);
+		return (ENXIO);
+	}
+	ahd->channel = ahd_get_pci_function(pci) + 'A';
+	if (rev < ID_AIC7902_PCI_REV_B0) {
+		/*
+		 * Enable A series workarounds.
+		 */
+		ahd->bugs |= AHD_SENT_SCB_UPDATE_BUG|AHD_ABORT_LQI_BUG
+			  |  AHD_PKT_BITBUCKET_BUG|AHD_LONG_SETIMO_BUG
+			  |  AHD_NLQICRC_DELAYED_BUG|AHD_SCSIRST_BUG
+			  |  AHD_LQO_ATNO_BUG|AHD_AUTOFLUSH_BUG
+			  |  AHD_CLRLQO_AUTOCLR_BUG|AHD_PCIX_MMAPIO_BUG
+			  |  AHD_PCIX_CHIPRST_BUG|AHD_PCIX_SCBRAM_RD_BUG
+			  |  AHD_PKTIZED_STATUS_BUG|AHD_PKT_LUN_BUG
+			  |  AHD_MDFF_WSCBPTR_BUG|AHD_REG_SLOW_SETTLE_BUG
+			  |  AHD_SET_MODE_BUG|AHD_BUSFREEREV_BUG
+			  |  AHD_NONPACKFIFO_BUG|AHD_PACED_NEGTABLE_BUG
+			  |  AHD_FAINT_LED_BUG;
+
+		/*
+		 * IO Cell paramter setup.
+		 */
+		AHD_SET_PRECOMP(ahd, AHD_PRECOMP_CUTBACK_29);
+
+		if ((ahd->flags & AHD_HP_BOARD) == 0)
+			AHD_SET_SLEWRATE(ahd, AHD_SLEWRATE_DEF_REVA);
+	} else {
+		u_int devconfig1;
+
+		ahd->features |= AHD_RTI|AHD_NEW_IOCELL_OPTS
+			      |  AHD_NEW_DFCNTRL_OPTS|AHD_FAST_CDB_DELIVERY;
+		ahd->bugs |= AHD_LQOOVERRUN_BUG|AHD_EARLY_REQ_BUG;
+
+		/*
+		 * Some issues have been resolved in the 7901B.
+		 */
+		if ((ahd->features & AHD_MULTI_FUNC) != 0)
+			ahd->bugs |= AHD_INTCOLLISION_BUG|AHD_ABORT_LQI_BUG;
+
+		/*
+		 * IO Cell paramter setup.
+		 */
+		AHD_SET_PRECOMP(ahd, AHD_PRECOMP_CUTBACK_29);
+		AHD_SET_SLEWRATE(ahd, AHD_SLEWRATE_DEF_REVB);
+		AHD_SET_AMPLITUDE(ahd, AHD_AMPLITUDE_DEF);
+
+		/*
+		 * Set the PREQDIS bit for H2B which disables some workaround
+		 * that doesn't work on regular PCI busses.
+		 * XXX - Find out exactly what this does from the hardware
+		 * 	 folks!
+		 */
+		devconfig1 = ahd_pci_read_config(pci, DEVCONFIG1, /*bytes*/1);
+		ahd_pci_write_config(pci, DEVCONFIG1,
+				     devconfig1|PREQDIS, /*bytes*/1);
+		devconfig1 = ahd_pci_read_config(pci, DEVCONFIG1, /*bytes*/1);
+	}
+
+	return (0);
+}