Merge tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "A quiet cycle this time.

   - ds1307: properly handle oscillator failure flags

   - imx-sc: alarm support

   - pcf2123: alarm support, correct offset handling

   - sun6i: add R40 support

   - simplify getting the adapter of an i2c client"

* tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (37 commits)
  rtc: wm831x: Add IRQF_ONESHOT flag
  rtc: stm32: remove one condition check in stm32_rtc_set_alarm()
  rtc: pcf2123: Fix build error
  rtc: interface: Change type of 'count' from int to u64
  rtc: pcf8563: Clear event flags and disable interrupts before requesting irq
  rtc: pcf8563: Fix interrupt trigger method
  rtc: pcf2123: fix negative offset rounding
  rtc: pcf2123: add alarm support
  rtc: pcf2123: use %ptR
  rtc: pcf2123: port to regmap
  rtc: pcf2123: remove sysfs register view
  rtc: rx8025: simplify getting the adapter of a client
  rtc: rx8010: simplify getting the adapter of a client
  rtc: rv8803: simplify getting the adapter of a client
  rtc: m41t80: simplify getting the adapter of a client
  rtc: fm3130: simplify getting the adapter of a client
  rtc: tegra: Drop MODULE_ALIAS
  rtc: sun6i: Add R40 compatible
  dt-bindings: rtc: sun6i: Add the R40 RTC compatible
  dt-bindings: rtc: Convert Allwinner A31 RTC to a schema
  ...

1 files changed, 29 insertions, 26 deletions

diff --git a/drivers/rtc/rtc-s35390a.c b/drivers/rtc/rtc-s35390a.c
index 8c37acb4a007..84806ff763cf 100644
--- a/drivers/rtc/rtc-s35390a.c
+++ b/drivers/rtc/rtc-s35390a.c
@@ -32,21 +32,22 @@
 #define S35390A_ALRM_BYTE_MINS	2
 
 /* flags for STATUS1 */
-#define S35390A_FLAG_POC	0x01
-#define S35390A_FLAG_BLD	0x02
-#define S35390A_FLAG_INT2	0x04
-#define S35390A_FLAG_24H	0x40
-#define S35390A_FLAG_RESET	0x80
+#define S35390A_FLAG_POC	BIT(0)
+#define S35390A_FLAG_BLD	BIT(1)
+#define S35390A_FLAG_INT2	BIT(2)
+#define S35390A_FLAG_24H	BIT(6)
+#define S35390A_FLAG_RESET	BIT(7)
 
 /* flag for STATUS2 */
-#define S35390A_FLAG_TEST	0x01
-
-#define S35390A_INT2_MODE_MASK		0xF0
+#define S35390A_FLAG_TEST	BIT(0)
 
+/* INT2 pin output mode */
+#define S35390A_INT2_MODE_MASK		0x0E
 #define S35390A_INT2_MODE_NOINTR	0x00
-#define S35390A_INT2_MODE_FREQ		0x10
-#define S35390A_INT2_MODE_ALARM		0x40
-#define S35390A_INT2_MODE_PMIN_EDG	0x20
+#define S35390A_INT2_MODE_ALARM		BIT(1) /* INT2AE */
+#define S35390A_INT2_MODE_PMIN_EDG	BIT(2) /* INT2ME */
+#define S35390A_INT2_MODE_FREQ		BIT(3) /* INT2FE */
+#define S35390A_INT2_MODE_PMIN		(BIT(3) | BIT(2)) /* INT2FE | INT2ME */
 
 static const struct i2c_device_id s35390a_id[] = {
 	{ "s35390a", 0 },
@@ -284,6 +285,9 @@ static int s35390a_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 		alm->time.tm_min, alm->time.tm_hour, alm->time.tm_mday,
 		alm->time.tm_mon, alm->time.tm_year, alm->time.tm_wday);
 
+	if (alm->time.tm_sec != 0)
+		dev_warn(&client->dev, "Alarms are only supported on a per minute basis!\n");
+
 	/* disable interrupt (which deasserts the irq line) */
 	err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
 	if (err < 0)
@@ -299,9 +303,6 @@ static int s35390a_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	else
 		sts = S35390A_INT2_MODE_NOINTR;
 
-	/* This chip expects the bits of each byte to be in reverse order */
-	sts = bitrev8(sts);
-
 	/* set interupt mode*/
 	err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
 	if (err < 0)
@@ -339,7 +340,7 @@ static int s35390a_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	if (err < 0)
 		return err;
 
-	if ((bitrev8(sts) & S35390A_INT2_MODE_MASK) != S35390A_INT2_MODE_ALARM) {
+	if ((sts & S35390A_INT2_MODE_MASK) != S35390A_INT2_MODE_ALARM) {
 		/*
 		 * When the alarm isn't enabled, the register to configure
 		 * the alarm time isn't accessible.
@@ -431,14 +432,14 @@ static int s35390a_probe(struct i2c_client *client,
 	unsigned int i;
 	struct s35390a *s35390a;
 	char buf, status1;
+	struct device *dev = &client->dev;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
 		err = -ENODEV;
 		goto exit;
 	}
 
-	s35390a = devm_kzalloc(&client->dev, sizeof(struct s35390a),
-				GFP_KERNEL);
+	s35390a = devm_kzalloc(dev, sizeof(struct s35390a), GFP_KERNEL);
 	if (!s35390a) {
 		err = -ENOMEM;
 		goto exit;
@@ -452,8 +453,8 @@ static int s35390a_probe(struct i2c_client *client,
 		s35390a->client[i] = i2c_new_dummy(client->adapter,
 					client->addr + i);
 		if (!s35390a->client[i]) {
-			dev_err(&client->dev, "Address %02x unavailable\n",
-						client->addr + i);
+			dev_err(dev, "Address %02x unavailable\n",
+				client->addr + i);
 			err = -EBUSY;
 			goto exit_dummy;
 		}
@@ -462,7 +463,7 @@ static int s35390a_probe(struct i2c_client *client,
 	err_read = s35390a_read_status(s35390a, &status1);
 	if (err_read < 0) {
 		err = err_read;
-		dev_err(&client->dev, "error resetting chip\n");
+		dev_err(dev, "error resetting chip\n");
 		goto exit_dummy;
 	}
 
@@ -476,28 +477,30 @@ static int s35390a_probe(struct i2c_client *client,
 		buf = 0;
 		err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &buf, 1);
 		if (err < 0) {
-			dev_err(&client->dev, "error disabling alarm");
+			dev_err(dev, "error disabling alarm");
 			goto exit_dummy;
 		}
 	} else {
 		err = s35390a_disable_test_mode(s35390a);
 		if (err < 0) {
-			dev_err(&client->dev, "error disabling test mode\n");
+			dev_err(dev, "error disabling test mode\n");
 			goto exit_dummy;
 		}
 	}
 
-	device_set_wakeup_capable(&client->dev, 1);
+	device_set_wakeup_capable(dev, 1);
 
-	s35390a->rtc = devm_rtc_device_register(&client->dev,
-					s35390a_driver.driver.name,
-					&s35390a_rtc_ops, THIS_MODULE);
+	s35390a->rtc = devm_rtc_device_register(dev, s35390a_driver.driver.name,
+						&s35390a_rtc_ops, THIS_MODULE);
 
 	if (IS_ERR(s35390a->rtc)) {
 		err = PTR_ERR(s35390a->rtc);
 		goto exit_dummy;
 	}
 
+	/* supports per-minute alarms only, therefore set uie_unsupported */
+	s35390a->rtc->uie_unsupported = 1;
+
 	if (status1 & S35390A_FLAG_INT2)
 		rtc_update_irq(s35390a->rtc, 1, RTC_AF);