Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for 3.17.  It contains:

   - misc Cavium Octeon, BCM47xx, BCM63xx and Alchemy  updates
   - MIPS ptrace updates and cleanups
   - various fixes that will also go to -stable
   - a number of cleanups and small non-critical fixes.
   - NUMA support for the Loongson 3.
   - more support for MSA
   - support for MAAR
   - various FP enhancements and fixes"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits)
  MIPS: jz4740: remove unnecessary null test before debugfs_remove
  MIPS: Octeon: remove unnecessary null test before debugfs_remove_recursive
  MIPS: ZBOOT: implement stack protector in compressed boot phase
  MIPS: mipsreg: remove duplicate MIPS_CONF4_FTLBSETS_SHIFT
  MIPS: Bonito64: remove a duplicate define
  MIPS: Malta: initialise MAARs
  MIPS: Initialise MAARs
  MIPS: detect presence of MAARs
  MIPS: define MAAR register accessors & bits
  MIPS: mark MSA experimental
  MIPS: Don't build MSA support unless it can be used
  MIPS: consistently clear MSA flags when starting & copying threads
  MIPS: 16 byte align MSA vector context
  MIPS: disable preemption whilst initialising MSA
  MIPS: ensure MSA gets disabled during boot
  MIPS: fix read_msa_* & write_msa_* functions on non-MSA toolchains
  MIPS: fix MSA context for tasks which don't use FP first
  MIPS: init upper 64b of vector registers when MSA is first used
  MIPS: save/disable MSA in lose_fpu
  MIPS: preserve scalar FP CSR when switching vector context
  ...

1 files changed, 8 insertions, 10 deletions

diff --git a/drivers/rtc/rtc-au1xxx.c b/drivers/rtc/rtc-au1xxx.c
index ed526a192ce0..fd25e2374d4e 100644
--- a/drivers/rtc/rtc-au1xxx.c
+++ b/drivers/rtc/rtc-au1xxx.c
@@ -32,7 +32,7 @@ static int au1xtoy_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	unsigned long t;
 
-	t = au_readl(SYS_TOYREAD);
+	t = alchemy_rdsys(AU1000_SYS_TOYREAD);
 
 	rtc_time_to_tm(t, tm);
 
@@ -45,13 +45,12 @@ static int au1xtoy_rtc_set_time(struct device *dev, struct rtc_time *tm)
 
 	rtc_tm_to_time(tm, &t);
 
-	au_writel(t, SYS_TOYWRITE);
-	au_sync();
+	alchemy_wrsys(t, AU1000_SYS_TOYWRITE);
 
 	/* wait for the pending register write to succeed.  This can
 	 * take up to 6 seconds...
 	 */
-	while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S)
+	while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C0S)
 		msleep(1);
 
 	return 0;
@@ -68,7 +67,7 @@ static int au1xtoy_rtc_probe(struct platform_device *pdev)
 	unsigned long t;
 	int ret;
 
-	t = au_readl(SYS_COUNTER_CNTRL);
+	t = alchemy_rdsys(AU1000_SYS_CNTRCTRL);
 	if (!(t & CNTR_OK)) {
 		dev_err(&pdev->dev, "counters not working; aborting.\n");
 		ret = -ENODEV;
@@ -78,10 +77,10 @@ static int au1xtoy_rtc_probe(struct platform_device *pdev)
 	ret = -ETIMEDOUT;
 
 	/* set counter0 tickrate to 1Hz if necessary */
-	if (au_readl(SYS_TOYTRIM) != 32767) {
+	if (alchemy_rdsys(AU1000_SYS_TOYTRIM) != 32767) {
 		/* wait until hardware gives access to TRIM register */
 		t = 0x00100000;
-		while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S) && --t)
+		while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_T0S) && --t)
 			msleep(1);
 
 		if (!t) {
@@ -93,12 +92,11 @@ static int au1xtoy_rtc_probe(struct platform_device *pdev)
 		}
 
 		/* set 1Hz TOY tick rate */
-		au_writel(32767, SYS_TOYTRIM);
-		au_sync();
+		alchemy_wrsys(32767, AU1000_SYS_TOYTRIM);
 	}
 
 	/* wait until the hardware allows writes to the counter reg */
-	while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S)
+	while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C0S)
 		msleep(1);
 
 	rtcdev = devm_rtc_device_register(&pdev->dev, "rtc-au1xxx",