Merge branch 'nuvoton/newsoc' into arm/newsoc

Merge the new SoC support from Tomer Maimon:
 "This patchset  adds initial support for the Nuvoton
  Arbel NPCM8XX Board Management controller (BMC) SoC family.

  The Nuvoton Arbel NPCM8XX SoC is a fourth-generation BMC.
  The NPCM8XX computing subsystem comprises a quadcore ARM
  Cortex A35 ARM-V8 architecture.

  This patchset adds minimal architecture and drivers such as:
  Clocksource, Clock, Reset, and WD.

  Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.

  This patchset was tested on the Arbel NPCM8XX evaluation board."

I'm leaving out the clk controller driver, which is still under
review.

* nuvoton/newsoc:
  arm64: defconfig: Add Nuvoton NPCM family support
  arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  arm64: dts: nuvoton: Add initial NPCM8XX device tree
  arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
  dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
  dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
  dt-bindings: arm: npcm: Add maintainer
  reset: npcm: Add NPCM8XX support
  dt-bindings: reset: npcm: Add support for NPCM8XX
  reset: npcm: using syscon instead of device data
  ARM: dts: nuvoton: add reset syscon property
  dt-bindings: reset: npcm: add GCR syscon property
  dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  dt-bindings: watchdog: npcm: Add npcm845 compatible string
  dt-bindings: timer: npcm: Add npcm845 compatible string

1 files changed, 173 insertions, 34 deletions

diff --git a/drivers/reset/reset-npcm.c b/drivers/reset/reset-npcm.c
index 2ea4d3136e15..24c55efa98e5 100644
--- a/drivers/reset/reset-npcm.c
+++ b/drivers/reset/reset-npcm.c
@@ -17,13 +17,20 @@
 
 /* NPCM7xx GCR registers */
 #define NPCM_MDLR_OFFSET	0x7C
-#define NPCM_MDLR_USBD0		BIT(9)
-#define NPCM_MDLR_USBD1		BIT(8)
-#define NPCM_MDLR_USBD2_4	BIT(21)
-#define NPCM_MDLR_USBD5_9	BIT(22)
+#define NPCM7XX_MDLR_USBD0	BIT(9)
+#define NPCM7XX_MDLR_USBD1	BIT(8)
+#define NPCM7XX_MDLR_USBD2_4	BIT(21)
+#define NPCM7XX_MDLR_USBD5_9	BIT(22)
+
+/* NPCM8xx MDLR bits */
+#define NPCM8XX_MDLR_USBD0_3	BIT(9)
+#define NPCM8XX_MDLR_USBD4_7	BIT(22)
+#define NPCM8XX_MDLR_USBD8	BIT(24)
+#define NPCM8XX_MDLR_USBD9	BIT(21)
 
 #define NPCM_USB1PHYCTL_OFFSET	0x140
 #define NPCM_USB2PHYCTL_OFFSET	0x144
+#define NPCM_USB3PHYCTL_OFFSET	0x148
 #define NPCM_USBXPHYCTL_RS	BIT(28)
 
 /* NPCM7xx Reset registers */
@@ -49,12 +56,38 @@
 #define NPCM_IPSRST3_USBPHY1	BIT(24)
 #define NPCM_IPSRST3_USBPHY2	BIT(25)
 
+#define NPCM_IPSRST4		0x74
+#define NPCM_IPSRST4_USBPHY3	BIT(25)
+#define NPCM_IPSRST4_USB_HOST2	BIT(31)
+
 #define NPCM_RC_RESETS_PER_REG	32
 #define NPCM_MASK_RESETS	GENMASK(4, 0)
 
+enum {
+	BMC_NPCM7XX = 0,
+	BMC_NPCM8XX,
+};
+
+static const u32 npxm7xx_ipsrst[] = {NPCM_IPSRST1, NPCM_IPSRST2, NPCM_IPSRST3};
+static const u32 npxm8xx_ipsrst[] = {NPCM_IPSRST1, NPCM_IPSRST2, NPCM_IPSRST3,
+	NPCM_IPSRST4};
+
+struct npcm_reset_info {
+	u32 bmc_id;
+	u32 num_ipsrst;
+	const u32 *ipsrst;
+};
+
+static const struct npcm_reset_info npxm7xx_reset_info[] = {
+	{.bmc_id = BMC_NPCM7XX, .num_ipsrst = 3, .ipsrst = npxm7xx_ipsrst}};
+static const struct npcm_reset_info npxm8xx_reset_info[] = {
+	{.bmc_id = BMC_NPCM8XX, .num_ipsrst = 4, .ipsrst = npxm8xx_ipsrst}};
+
 struct npcm_rc_data {
 	struct reset_controller_dev rcdev;
 	struct notifier_block restart_nb;
+	const struct npcm_reset_info *info;
+	struct regmap *gcr_regmap;
 	u32 sw_reset_number;
 	void __iomem *base;
 	spinlock_t lock;
@@ -120,14 +153,24 @@ static int npcm_rc_status(struct reset_controller_dev *rcdev,
 static int npcm_reset_xlate(struct reset_controller_dev *rcdev,
 			    const struct of_phandle_args *reset_spec)
 {
+	struct npcm_rc_data *rc = to_rc_data(rcdev);
 	unsigned int offset, bit;
+	bool offset_found = false;
+	int off_num;
 
 	offset = reset_spec->args[0];
-	if (offset != NPCM_IPSRST1 && offset != NPCM_IPSRST2 &&
-	    offset != NPCM_IPSRST3) {
+	for (off_num = 0 ; off_num < rc->info->num_ipsrst ; off_num++) {
+		if (offset == rc->info->ipsrst[off_num]) {
+			offset_found = true;
+			break;
+		}
+	}
+
+	if (!offset_found) {
 		dev_err(rcdev->dev, "Error reset register (0x%x)\n", offset);
 		return -EINVAL;
 	}
+
 	bit = reset_spec->args[1];
 	if (bit >= NPCM_RC_RESETS_PER_REG) {
 		dev_err(rcdev->dev, "Error reset number (%d)\n", bit);
@@ -138,45 +181,29 @@ static int npcm_reset_xlate(struct reset_controller_dev *rcdev,
 }
 
 static const struct of_device_id npcm_rc_match[] = {
-	{ .compatible = "nuvoton,npcm750-reset",
-		.data = (void *)"nuvoton,npcm750-gcr" },
+	{ .compatible = "nuvoton,npcm750-reset", .data = &npxm7xx_reset_info},
+	{ .compatible = "nuvoton,npcm845-reset", .data = &npxm8xx_reset_info},
 	{ }
 };
 
-/*
- *  The following procedure should be observed in USB PHY, USB device and
- *  USB host initialization at BMC boot
- */
-static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
+static void npcm_usb_reset_npcm7xx(struct npcm_rc_data *rc)
 {
 	u32 mdlr, iprst1, iprst2, iprst3;
-	struct device *dev = &pdev->dev;
-	struct regmap *gcr_regmap;
 	u32 ipsrst1_bits = 0;
 	u32 ipsrst2_bits = NPCM_IPSRST2_USB_HOST;
 	u32 ipsrst3_bits = 0;
-	const char *gcr_dt;
-
-	gcr_dt = (const char *)
-	of_match_device(dev->driver->of_match_table, dev)->data;
-
-	gcr_regmap = syscon_regmap_lookup_by_compatible(gcr_dt);
-	if (IS_ERR(gcr_regmap)) {
-		dev_err(&pdev->dev, "Failed to find %s\n", gcr_dt);
-		return PTR_ERR(gcr_regmap);
-	}
 
 	/* checking which USB device is enabled */
-	regmap_read(gcr_regmap, NPCM_MDLR_OFFSET, &mdlr);
-	if (!(mdlr & NPCM_MDLR_USBD0))
+	regmap_read(rc->gcr_regmap, NPCM_MDLR_OFFSET, &mdlr);
+	if (!(mdlr & NPCM7XX_MDLR_USBD0))
 		ipsrst3_bits |= NPCM_IPSRST3_USBD0;
-	if (!(mdlr & NPCM_MDLR_USBD1))
+	if (!(mdlr & NPCM7XX_MDLR_USBD1))
 		ipsrst1_bits |= NPCM_IPSRST1_USBD1;
-	if (!(mdlr & NPCM_MDLR_USBD2_4))
+	if (!(mdlr & NPCM7XX_MDLR_USBD2_4))
 		ipsrst1_bits |= (NPCM_IPSRST1_USBD2 |
 				 NPCM_IPSRST1_USBD3 |
 				 NPCM_IPSRST1_USBD4);
-	if (!(mdlr & NPCM_MDLR_USBD0)) {
+	if (!(mdlr & NPCM7XX_MDLR_USBD0)) {
 		ipsrst1_bits |= (NPCM_IPSRST1_USBD5 |
 				 NPCM_IPSRST1_USBD6);
 		ipsrst3_bits |= (NPCM_IPSRST3_USBD7 |
@@ -199,9 +226,9 @@ static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
 	writel(iprst3, rc->base + NPCM_IPSRST3);
 
 	/* clear USB PHY RS bit */
-	regmap_update_bits(gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
 			   NPCM_USBXPHYCTL_RS, 0);
-	regmap_update_bits(gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
 			   NPCM_USBXPHYCTL_RS, 0);
 
 	/* deassert reset USB PHY */
@@ -211,19 +238,131 @@ static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
 	udelay(50);
 
 	/* set USB PHY RS bit */
-	regmap_update_bits(gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+			   NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+			   NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
+
+	/* deassert reset USB devices*/
+	iprst1 &= ~ipsrst1_bits;
+	iprst2 &= ~ipsrst2_bits;
+	iprst3 &= ~ipsrst3_bits;
+
+	writel(iprst1, rc->base + NPCM_IPSRST1);
+	writel(iprst2, rc->base + NPCM_IPSRST2);
+	writel(iprst3, rc->base + NPCM_IPSRST3);
+}
+
+static void npcm_usb_reset_npcm8xx(struct npcm_rc_data *rc)
+{
+	u32 mdlr, iprst1, iprst2, iprst3, iprst4;
+	u32 ipsrst1_bits = 0;
+	u32 ipsrst2_bits = NPCM_IPSRST2_USB_HOST;
+	u32 ipsrst3_bits = 0;
+	u32 ipsrst4_bits = NPCM_IPSRST4_USB_HOST2 | NPCM_IPSRST4_USBPHY3;
+
+	/* checking which USB device is enabled */
+	regmap_read(rc->gcr_regmap, NPCM_MDLR_OFFSET, &mdlr);
+	if (!(mdlr & NPCM8XX_MDLR_USBD0_3)) {
+		ipsrst3_bits |= NPCM_IPSRST3_USBD0;
+		ipsrst1_bits |= (NPCM_IPSRST1_USBD1 |
+				 NPCM_IPSRST1_USBD2 |
+				 NPCM_IPSRST1_USBD3);
+	}
+	if (!(mdlr & NPCM8XX_MDLR_USBD4_7)) {
+		ipsrst1_bits |= (NPCM_IPSRST1_USBD4 |
+				 NPCM_IPSRST1_USBD5 |
+				 NPCM_IPSRST1_USBD6);
+		ipsrst3_bits |= NPCM_IPSRST3_USBD7;
+	}
+
+	if (!(mdlr & NPCM8XX_MDLR_USBD8))
+		ipsrst3_bits |= NPCM_IPSRST3_USBD8;
+	if (!(mdlr & NPCM8XX_MDLR_USBD9))
+		ipsrst3_bits |= NPCM_IPSRST3_USBD9;
+
+	/* assert reset USB PHY and USB devices */
+	iprst1 = readl(rc->base + NPCM_IPSRST1);
+	iprst2 = readl(rc->base + NPCM_IPSRST2);
+	iprst3 = readl(rc->base + NPCM_IPSRST3);
+	iprst4 = readl(rc->base + NPCM_IPSRST4);
+
+	iprst1 |= ipsrst1_bits;
+	iprst2 |= ipsrst2_bits;
+	iprst3 |= (ipsrst3_bits | NPCM_IPSRST3_USBPHY1 |
+		   NPCM_IPSRST3_USBPHY2);
+	iprst2 |= ipsrst4_bits;
+
+	writel(iprst1, rc->base + NPCM_IPSRST1);
+	writel(iprst2, rc->base + NPCM_IPSRST2);
+	writel(iprst3, rc->base + NPCM_IPSRST3);
+	writel(iprst4, rc->base + NPCM_IPSRST4);
+
+	/* clear USB PHY RS bit */
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+			   NPCM_USBXPHYCTL_RS, 0);
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+			   NPCM_USBXPHYCTL_RS, 0);
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB3PHYCTL_OFFSET,
+			   NPCM_USBXPHYCTL_RS, 0);
+
+	/* deassert reset USB PHY */
+	iprst3 &= ~(NPCM_IPSRST3_USBPHY1 | NPCM_IPSRST3_USBPHY2);
+	writel(iprst3, rc->base + NPCM_IPSRST3);
+	iprst4 &= ~NPCM_IPSRST4_USBPHY3;
+	writel(iprst4, rc->base + NPCM_IPSRST4);
+
+	/* set USB PHY RS bit */
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+			   NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
 			   NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
-	regmap_update_bits(gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+	regmap_update_bits(rc->gcr_regmap, NPCM_USB3PHYCTL_OFFSET,
 			   NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
 
 	/* deassert reset USB devices*/
 	iprst1 &= ~ipsrst1_bits;
 	iprst2 &= ~ipsrst2_bits;
 	iprst3 &= ~ipsrst3_bits;
+	iprst4 &= ~ipsrst4_bits;
 
 	writel(iprst1, rc->base + NPCM_IPSRST1);
 	writel(iprst2, rc->base + NPCM_IPSRST2);
 	writel(iprst3, rc->base + NPCM_IPSRST3);
+	writel(iprst4, rc->base + NPCM_IPSRST4);
+}
+
+/*
+ *  The following procedure should be observed in USB PHY, USB device and
+ *  USB host initialization at BMC boot
+ */
+static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
+{
+	struct device *dev = &pdev->dev;
+
+	rc->gcr_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "nuvoton,sysgcr");
+	if (IS_ERR(rc->gcr_regmap)) {
+		dev_warn(&pdev->dev, "Failed to find nuvoton,sysgcr property, please update the device tree\n");
+		dev_info(&pdev->dev, "Using nuvoton,npcm750-gcr for Poleg backward compatibility\n");
+		rc->gcr_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-gcr");
+		if (IS_ERR(rc->gcr_regmap)) {
+			dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-gcr");
+			return PTR_ERR(rc->gcr_regmap);
+		}
+	}
+
+	rc->info = (const struct npcm_reset_info *)
+			of_match_device(dev->driver->of_match_table, dev)->data;
+	switch (rc->info->bmc_id) {
+	case BMC_NPCM7XX:
+		npcm_usb_reset_npcm7xx(rc);
+		break;
+	case BMC_NPCM8XX:
+		npcm_usb_reset_npcm8xx(rc);
+		break;
+	default:
+		return -ENODEV;
+	}
 
 	return 0;
 }