rapidio: use common destid storage for endpoints and switches

Change code to use one storage location common for switches and endpoints.
This eliminates unnecessary device type checks during basic access
operations.  Logic that assigns destid to RIO devices stays unchanged - as
before, switches use an associated destid because they do not have their
own.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 24 insertions, 32 deletions

diff --git a/drivers/rapidio/switches/tsi57x.c b/drivers/rapidio/switches/tsi57x.c
index 2003fb63c404..1a62934bfebc 100644
--- a/drivers/rapidio/switches/tsi57x.c
+++ b/drivers/rapidio/switches/tsi57x.c
@@ -158,48 +158,45 @@ tsi57x_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
 static int
 tsi57x_em_init(struct rio_dev *rdev)
 {
-	struct rio_mport *mport = rdev->net->hport;
-	u16 destid = rdev->rswitch->destid;
-	u8 hopcount = rdev->rswitch->hopcount;
 	u32 regval;
 	int portnum;
 
-	pr_debug("TSI578 %s [%d:%d]\n", __func__, destid, hopcount);
+	pr_debug("TSI578 %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount);
 
 	for (portnum = 0;
 	     portnum < RIO_GET_TOTAL_PORTS(rdev->swpinfo); portnum++) {
 		/* Make sure that Port-Writes are enabled (for all ports) */
-		rio_mport_read_config_32(mport, destid, hopcount,
+		rio_read_config_32(rdev,
 				TSI578_SP_MODE(portnum), &regval);
-		rio_mport_write_config_32(mport, destid, hopcount,
+		rio_write_config_32(rdev,
 				TSI578_SP_MODE(portnum),
 				regval & ~TSI578_SP_MODE_PW_DIS);
 
 		/* Clear all pending interrupts */
-		rio_mport_read_config_32(mport, destid, hopcount,
+		rio_read_config_32(rdev,
 				rdev->phys_efptr +
 					RIO_PORT_N_ERR_STS_CSR(portnum),
 				&regval);
-		rio_mport_write_config_32(mport, destid, hopcount,
+		rio_write_config_32(rdev,
 				rdev->phys_efptr +
 					RIO_PORT_N_ERR_STS_CSR(portnum),
 				regval & 0x07120214);
 
-		rio_mport_read_config_32(mport, destid, hopcount,
+		rio_read_config_32(rdev,
 				TSI578_SP_INT_STATUS(portnum), &regval);
-		rio_mport_write_config_32(mport, destid, hopcount,
+		rio_write_config_32(rdev,
 				TSI578_SP_INT_STATUS(portnum),
 				regval & 0x000700bd);
 
 		/* Enable all interrupts to allow ports to send a port-write */
-		rio_mport_read_config_32(mport, destid, hopcount,
+		rio_read_config_32(rdev,
 				TSI578_SP_CTL_INDEP(portnum), &regval);
-		rio_mport_write_config_32(mport, destid, hopcount,
+		rio_write_config_32(rdev,
 				TSI578_SP_CTL_INDEP(portnum),
 				regval | 0x000b0000);
 
 		/* Skip next (odd) port if the current port is in x4 mode */
-		rio_mport_read_config_32(mport, destid, hopcount,
+		rio_read_config_32(rdev,
 				rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
 				&regval);
 		if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4)
@@ -207,7 +204,7 @@ tsi57x_em_init(struct rio_dev *rdev)
 	}
 
 	/* set TVAL = ~50us */
-	rio_mport_write_config_32(mport, destid, hopcount,
+	rio_write_config_32(rdev,
 		rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x9a << 8);
 
 	return 0;
@@ -217,14 +214,12 @@ static int
 tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
 {
 	struct rio_mport *mport = rdev->net->hport;
-	u16 destid = rdev->rswitch->destid;
-	u8 hopcount = rdev->rswitch->hopcount;
 	u32 intstat, err_status;
 	int sendcount, checkcount;
 	u8 route_port;
 	u32 regval;
 
-	rio_mport_read_config_32(mport, destid, hopcount,
+	rio_read_config_32(rdev,
 			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
 			&err_status);
 
@@ -232,15 +227,15 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
 	    (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
 			  RIO_PORT_N_ERR_STS_PW_INP_ES))) {
 		/* Remove any queued packets by locking/unlocking port */
-		rio_mport_read_config_32(mport, destid, hopcount,
+		rio_read_config_32(rdev,
 			rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
 			&regval);
 		if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) {
-			rio_mport_write_config_32(mport, destid, hopcount,
+			rio_write_config_32(rdev,
 				rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
 				regval | RIO_PORT_N_CTL_LOCKOUT);
 			udelay(50);
-			rio_mport_write_config_32(mport, destid, hopcount,
+			rio_write_config_32(rdev,
 				rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
 				regval);
 		}
@@ -248,7 +243,7 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
 		/* Read from link maintenance response register to clear
 		 * valid bit
 		 */
-		rio_mport_read_config_32(mport, destid, hopcount,
+		rio_read_config_32(rdev,
 			rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(portnum),
 			&regval);
 
@@ -257,13 +252,12 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
 		 */
 		sendcount = 3;
 		while (sendcount) {
-			rio_mport_write_config_32(mport, destid, hopcount,
+			rio_write_config_32(rdev,
 					  TSI578_SP_CS_TX(portnum), 0x40fc8000);
 			checkcount = 3;
 			while (checkcount--) {
 				udelay(50);
-				rio_mport_read_config_32(
-					mport, destid, hopcount,
+				rio_read_config_32(rdev,
 					rdev->phys_efptr +
 						RIO_PORT_N_MNT_RSP_CSR(portnum),
 					&regval);
@@ -277,25 +271,23 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
 
 exit_es:
 	/* Clear implementation specific error status bits */
-	rio_mport_read_config_32(mport, destid, hopcount,
-				 TSI578_SP_INT_STATUS(portnum), &intstat);
+	rio_read_config_32(rdev, TSI578_SP_INT_STATUS(portnum), &intstat);
 	pr_debug("TSI578[%x:%x] SP%d_INT_STATUS=0x%08x\n",
-		 destid, hopcount, portnum, intstat);
+		 rdev->destid, rdev->hopcount, portnum, intstat);
 
 	if (intstat & 0x10000) {
-		rio_mport_read_config_32(mport, destid, hopcount,
+		rio_read_config_32(rdev,
 				TSI578_SP_LUT_PEINF(portnum), &regval);
 		regval = (mport->sys_size) ? (regval >> 16) : (regval >> 24);
 		route_port = rdev->rswitch->route_table[regval];
 		pr_debug("RIO: TSI578[%s] P%d LUT Parity Error (destID=%d)\n",
 			rio_name(rdev), portnum, regval);
-		tsi57x_route_add_entry(mport, destid, hopcount,
+		tsi57x_route_add_entry(mport, rdev->destid, rdev->hopcount,
 				RIO_GLOBAL_TABLE, regval, route_port);
 	}
 
-	rio_mport_write_config_32(mport, destid, hopcount,
-				  TSI578_SP_INT_STATUS(portnum),
-				  intstat & 0x000700bd);
+	rio_write_config_32(rdev, TSI578_SP_INT_STATUS(portnum),
+			    intstat & 0x000700bd);
 
 	return 0;
 }