Merge tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.11 kernel.

  Drivers, drivers and drivers. Not a single core change.

  Some new stuff, especially a bunch of new Intel, Qualcomm and Ocelot
  SoCs.

  As part of the modularization attempt, I applied one patch affecting
  the firmware subsystem as a functional (not syntactic/semantic)
  dependency and then it blew up in our face, so I had to revert it,
  bummer. It will come in later, through that subsystem, I guess.

  New drivers:

   - New driver for the Microchip Serial GPIO "SGPIO".

   - Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver.

  New subdrivers:

   - Intel Lakefield subdriver.

   - Intel Elkhart Lake subdriver.

   - Intel Alder Lake-S subdriver.

   - Qualcomm MSM8953 subdriver.

   - Qualcomm SDX55 subdriver.

   - Qualcomm SDX55 PMIC subdriver.

   - Ocelot Luton SoC subdriver.

   - Ocelot Serval SoC subdriver.

  Modularization:

   - The Meson driver can now be built as modules.

   - The Qualcomm driver(s) can now be built as modules.

  Incremental improvements:

   - The Intel driver now supports pin configuration for GPIO-related
     configurations.

   - A bunch of Renesas PFC drivers have been augmented with support for
     QSPI pins, groups and functions.

   - Non-critical fixes to the irq handling in the Allwinner Sunxi
     driver"

* tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
  pinctrl/spear: simplify the return expression of spear300_pinctrl_probe()
  pinctrl: mediatek: simplify the return expression of mtk_pinconf_bias_disable_set_rev1()
  dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add irq support
  pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)
  pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
  dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
  pinctrl: qcom-pmic-gpio: Add support for pmx55
  dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support
  pinctrl: pinctrl-microchip-sgpio: Mark some symbols with static keyword
  pinctrl: at91-pio4: Make PINCTRL_AT91PIO4 depend on HAS_IOMEM to fix build error
  pinctrl: mtk: Fix low level output voltage issue
  pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe()
  pinctrl: actions: pinctrl-s500: Constify s500_padinfo[]
  pinctrl: pinctrl-microchip-sgpio: Add OF config dependency
  pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
  dt-bindings: pinctrl: Add bindings for pinctrl-microchip-sgpio driver
  pinctrl: at91-pio4: add support for fewer lines on last PIO bank
  pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler
  pinctrl: sunxi: Mark the irq bank not found in sunxi_pinctrl_irq_handler() with WARN_ON
  pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller
  ...

1 files changed, 41 insertions, 2 deletions

diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index 899c16c17b6d..2d4acf21117c 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -197,10 +197,16 @@ static int amd_gpio_set_config(struct gpio_chip *gc, unsigned offset,
 static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
 {
 	u32 pin_reg;
+	u32 db_cntrl;
 	unsigned long flags;
 	unsigned int bank, i, pin_num;
 	struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
 
+	bool tmr_out_unit;
+	unsigned int time;
+	unsigned int unit;
+	bool tmr_large;
+
 	char *level_trig;
 	char *active_level;
 	char *interrupt_enable;
@@ -214,6 +220,8 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
 	char *pull_down_enable;
 	char *output_value;
 	char *output_enable;
+	char debounce_value[40];
+	char *debounce_enable;
 
 	for (bank = 0; bank < gpio_dev->hwbank_num; bank++) {
 		seq_printf(s, "GPIO bank%d\t", bank);
@@ -327,13 +335,44 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
 					pin_sts = "input is low|";
 			}
 
+			db_cntrl = (DB_CNTRl_MASK << DB_CNTRL_OFF) & pin_reg;
+			if (db_cntrl) {
+				tmr_out_unit = pin_reg & BIT(DB_TMR_OUT_UNIT_OFF);
+				tmr_large = pin_reg & BIT(DB_TMR_LARGE_OFF);
+				time = pin_reg & DB_TMR_OUT_MASK;
+				if (tmr_large) {
+					if (tmr_out_unit)
+						unit = 62500;
+					else
+						unit = 15625;
+				} else {
+					if (tmr_out_unit)
+						unit = 244;
+					else
+						unit = 61;
+				}
+				if ((DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF) == db_cntrl)
+					debounce_enable = "debouncing filter (high and low) enabled|";
+				else if ((DB_TYPE_PRESERVE_LOW_GLITCH << DB_CNTRL_OFF) == db_cntrl)
+					debounce_enable = "debouncing filter (low) enabled|";
+				else
+					debounce_enable = "debouncing filter (high) enabled|";
+
+				snprintf(debounce_value, sizeof(debounce_value),
+					 "debouncing timeout is %u (us)|", time * unit);
+			} else {
+				debounce_enable = "debouncing filter disabled|";
+				snprintf(debounce_value, sizeof(debounce_value), " ");
+			}
+
 			seq_printf(s, "%s %s %s %s %s %s\n"
-				" %s %s %s %s %s %s %s 0x%x\n",
+				" %s %s %s %s %s %s %s %s %s 0x%x\n",
 				level_trig, active_level, interrupt_enable,
 				interrupt_mask, wake_cntrl0, wake_cntrl1,
 				wake_cntrl2, pin_sts, pull_up_sel,
 				pull_up_enable, pull_down_enable,
-				output_value, output_enable, pin_reg);
+				output_value, output_enable,
+				debounce_enable, debounce_value, pin_reg);
 		}
 	}
 }