Merge tag 'pinctrl-for-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl changes from Linus Walleij:
 "These are the first and major pinctrl changes for the v3.8 merge
  cycle.  Some of this is used as merge base for other trees so I better
  be early on the trigger.

  As can be seen from the diffstat the major changes are:

  - A big conversion of the AT91 pinctrl driver and the associated ACKed
    platform changes under arch/arm/max-at91 and its device trees.  This
    has been coordinated with the AT91 maintainers to go in through the
    pinctrl tree.

  - A larger chunk of changes to the SPEAr drivers and the addition of
    the "plgpio" driver for the SPEAr as well.

  - The removal of the remnants of the Nomadik driver from the arch/arm
    tree and fusion of that into the Nomadik driver and platform data
    header files.

  - Some local movement in the Marvell MVEBU drivers, these now have
    their own subdirectory.

  - The addition of a chunk of code to gpiolib under drivers/gpio to
    register gpio-to-pin range mappings from the GPIO side of things.
    This has been requested by Grant Likely and is now implemented, it
    is particularly useful for device tree work.

  Then we have incremental updates all over the place, many of these are
  cleanups and fixes from Axel Lin who has done a great job of removing
  minor mistakes and compilation annoyances."

* tag 'pinctrl-for-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (114 commits)
  ARM: mmp: select PINCTRL for ARCH_MMP
  pinctrl: Drop selecting PINCONF for MMP2, PXA168 and PXA910
  pinctrl: pinctrl-single: Fix error check condition
  pinctrl: SPEAr: Update error check for unsigned variables
  gpiolib: Fix use after free in gpiochip_add_pin_range
  gpiolib: rename pin range arguments
  pinctrl: single: support gpio request and free
  pinctrl: generic: add input schmitt disable parameter
  pinctrl/u300/coh901: stop spawning pinctrl from GPIO
  pinctrl/u300/coh901: let the gpio_chip register the range
  pinctrl: add function to retrieve range from pin
  gpiolib: return any error code from range creation
  pinctrl: make range registration defer properly
  gpiolib: rename find_pinctrl_*
  gpiolib: let gpiochip_add_pin_range() specify offset
  ARM: at91: pm9g45: add mmc support
  ARM: at91: Animeo IP: add mmc support
  ARM: at91: dt: add mmc pinctrl for Atmel reference boards
  ARM: at91: dt: at91sam9: add mmc pinctrl support
  ARM: at91/dts: add nodes for atmel hsmci controllers for atmel boards
  ...

1 files changed, 192 insertions, 0 deletions

diff --git a/drivers/pinctrl/mvebu/pinctrl-mvebu.h b/drivers/pinctrl/mvebu/pinctrl-mvebu.h
new file mode 100644
index 000000000000..90bd3beee860
--- /dev/null
+++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.h
@@ -0,0 +1,192 @@
+/*
+ * Marvell MVEBU pinctrl driver
+ *
+ * Authors: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *          Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __PINCTRL_MVEBU_H__
+#define __PINCTRL_MVEBU_H__
+
+/**
+ * struct mvebu_mpp_ctrl - describe a mpp control
+ * @name: name of the control group
+ * @pid: first pin id handled by this control
+ * @npins: number of pins controlled by this control
+ * @mpp_get: (optional) special function to get mpp setting
+ * @mpp_set: (optional) special function to set mpp setting
+ * @mpp_gpio_req: (optional) special function to request gpio
+ * @mpp_gpio_dir: (optional) special function to set gpio direction
+ *
+ * A mpp_ctrl describes a muxable unit, e.g. pin, group of pins, or
+ * internal function, inside the SoC. Each muxable unit can be switched
+ * between two or more different settings, e.g. assign mpp pin 13 to
+ * uart1 or sata.
+ *
+ * If optional mpp_get/_set functions are set these are used to get/set
+ * a specific mode. Otherwise it is assumed that the mpp control is based
+ * on 4-bit groups in subsequent registers. The optional mpp_gpio_req/_dir
+ * functions can be used to allow pin settings with varying gpio pins.
+ */
+struct mvebu_mpp_ctrl {
+	const char *name;
+	u8 pid;
+	u8 npins;
+	unsigned *pins;
+	int (*mpp_get)(struct mvebu_mpp_ctrl *ctrl, unsigned long *config);
+	int (*mpp_set)(struct mvebu_mpp_ctrl *ctrl, unsigned long config);
+	int (*mpp_gpio_req)(struct mvebu_mpp_ctrl *ctrl, u8 pid);
+	int (*mpp_gpio_dir)(struct mvebu_mpp_ctrl *ctrl, u8 pid, bool input);
+};
+
+/**
+ * struct mvebu_mpp_ctrl_setting - describe a mpp ctrl setting
+ * @val: ctrl setting value
+ * @name: ctrl setting name, e.g. uart2, spi0 - unique per mpp_mode
+ * @subname: (optional) additional ctrl setting name, e.g. rts, cts
+ * @variant: (optional) variant identifier mask
+ * @flags: (private) flags to store gpi/gpo/gpio capabilities
+ *
+ * A ctrl_setting describes a specific internal mux function that a mpp pin
+ * can be switched to. The value (val) will be written in the corresponding
+ * register for common mpp pin configuration registers on MVEBU. SoC specific
+ * mpp_get/_set function may use val to distinguish between different settings.
+ *
+ * The name will be used to switch to this setting in DT description, e.g.
+ * marvell,function = "uart2". subname is only for debugging purposes.
+ *
+ * If name is one of "gpi", "gpo", "gpio" gpio capabilities are
+ * parsed during initialization and stored in flags.
+ *
+ * The variant can be used to combine different revisions of one SoC to a
+ * common pinctrl driver. It is matched (AND) with variant of soc_info to
+ * determine if a setting is available on the current SoC revision.
+ */
+struct mvebu_mpp_ctrl_setting {
+	u8 val;
+	const char *name;
+	const char *subname;
+	u8 variant;
+	u8 flags;
+#define  MVEBU_SETTING_GPO	(1 << 0)
+#define  MVEBU_SETTING_GPI	(1 << 1)
+};
+
+/**
+ * struct mvebu_mpp_mode - link ctrl and settings
+ * @pid: first pin id handled by this mode
+ * @settings: list of settings available for this mode
+ *
+ * A mode connects all available settings with the corresponding mpp_ctrl
+ * given by pid.
+ */
+struct mvebu_mpp_mode {
+	u8 pid;
+	struct mvebu_mpp_ctrl_setting *settings;
+};
+
+/**
+ * struct mvebu_pinctrl_soc_info - SoC specific info passed to pinctrl-mvebu
+ * @variant: variant mask of soc_info
+ * @controls: list of available mvebu_mpp_ctrls
+ * @ncontrols: number of available mvebu_mpp_ctrls
+ * @modes: list of available mvebu_mpp_modes
+ * @nmodes: number of available mvebu_mpp_modes
+ * @gpioranges: list of pinctrl_gpio_ranges
+ * @ngpioranges: number of available pinctrl_gpio_ranges
+ *
+ * This struct describes all pinctrl related information for a specific SoC.
+ * If variant is unequal 0 it will be matched (AND) with variant of each
+ * setting and allows to distinguish between different revisions of one SoC.
+ */
+struct mvebu_pinctrl_soc_info {
+	u8 variant;
+	struct mvebu_mpp_ctrl *controls;
+	int ncontrols;
+	struct mvebu_mpp_mode *modes;
+	int nmodes;
+	struct pinctrl_gpio_range *gpioranges;
+	int ngpioranges;
+};
+
+#define MPP_REG_CTRL(_idl, _idh)				\
+	{							\
+		.name = NULL,					\
+		.pid = _idl,					\
+		.npins = _idh - _idl + 1,			\
+		.pins = (unsigned[_idh - _idl + 1]) { },	\
+		.mpp_get = NULL,				\
+		.mpp_set = NULL,				\
+		.mpp_gpio_req = NULL,				\
+		.mpp_gpio_dir = NULL,				\
+	}
+
+#define MPP_FUNC_CTRL(_idl, _idh, _name, _func)			\
+	{							\
+		.name = _name,					\
+		.pid = _idl,					\
+		.npins = _idh - _idl + 1,			\
+		.pins = (unsigned[_idh - _idl + 1]) { },	\
+		.mpp_get = _func ## _get,			\
+		.mpp_set = _func ## _set,			\
+		.mpp_gpio_req = NULL,				\
+		.mpp_gpio_dir = NULL,				\
+	}
+
+#define MPP_FUNC_GPIO_CTRL(_idl, _idh, _name, _func)		\
+	{							\
+		.name = _name,					\
+		.pid = _idl,					\
+		.npins = _idh - _idl + 1,			\
+		.pins = (unsigned[_idh - _idl + 1]) { },	\
+		.mpp_get = _func ## _get,			\
+		.mpp_set = _func ## _set,			\
+		.mpp_gpio_req = _func ## _gpio_req,		\
+		.mpp_gpio_dir = _func ## _gpio_dir,		\
+	}
+
+#define _MPP_VAR_FUNCTION(_val, _name, _subname, _mask)		\
+	{							\
+		.val = _val,					\
+		.name = _name,					\
+		.subname = _subname,				\
+		.variant = _mask,				\
+		.flags = 0,					\
+	}
+
+#if defined(CONFIG_DEBUG_FS)
+#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask)		\
+	_MPP_VAR_FUNCTION(_val, _name, _subname, _mask)
+#else
+#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask)		\
+	_MPP_VAR_FUNCTION(_val, _name, NULL, _mask)
+#endif
+
+#define MPP_FUNCTION(_val, _name, _subname)			\
+	MPP_VAR_FUNCTION(_val, _name, _subname, (u8)-1)
+
+#define MPP_MODE(_id, ...)					\
+	{							\
+		.pid = _id,					\
+		.settings = (struct mvebu_mpp_ctrl_setting[]){	\
+			__VA_ARGS__, { } },			\
+	}
+
+#define MPP_GPIO_RANGE(_id, _pinbase, _gpiobase, _npins)	\
+	{							\
+		.name = "mvebu-gpio",				\
+		.id = _id,					\
+		.pin_base = _pinbase,				\
+		.base = _gpiobase,				\
+		.npins = _npins,				\
+	}
+
+int mvebu_pinctrl_probe(struct platform_device *pdev);
+int mvebu_pinctrl_remove(struct platform_device *pdev);
+
+#endif