phy: ufs-qcom: Refactor all init steps into phy_poweron

The phy code was using implicit sequencing between the PHY driver
and the UFS driver to implement certain hardware requirements.
Specifically, the PHY reset register in the UFS controller needs
to be deasserted before serdes start occurs in the PHY.

Before this change, the code was doing this by utilizing the two
phy callbacks, phy_init() and phy_poweron(), as "init step 1" and
"init step 2", where the UFS driver would deassert reset between
these two steps.

This makes it challenging to power off the regulators in suspend,
as regulators are initialized in init, not in poweron(), but only
poweroff() is called during suspend, not exit().

For UFS, move the actual firing up of the PHY to phy_poweron() and
phy_poweroff() callbacks, rather than init()/exit(). UFS calls
phy_poweroff() during suspend, so now all clocks and regulators for
the phy can be powered down during suspend.

QMP is a little tricky because the PHY is also shared with PCIe and
USB3, which have their own definitions for init() and poweron(). Rename
the meaty functions to _enable() and _disable() to disentangle from the
PHY core names, and then create two different ops structures: one for
UFS and one for the other PHY types.

In phy-qcom-ufs, remove the 'is_powered_on' and 'is_started' guards,
as the generic PHY code does the reference counting. The
14/20nm-specific init functions get collapsed into the generic power_on()
function, with the addition of a calibrate() callback specific to 14/20nm.

Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

1 files changed, 1 insertions, 32 deletions

diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
index cc343517a2ca..4815546f228c 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
@@ -42,36 +42,6 @@ void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
 		UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
 }
 
-static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy)
-{
-	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
-	bool is_rate_B = false;
-	int ret;
-
-	ret = ufs_qcom_phy_get_reset(phy_common);
-	if (ret)
-		return ret;
-
-	ret = reset_control_assert(phy_common->ufs_reset);
-	if (ret)
-		return ret;
-
-	if (phy_common->mode == PHY_MODE_UFS_HS_B)
-		is_rate_B = true;
-
-	ret = ufs_qcom_phy_qmp_14nm_phy_calibrate(phy_common, is_rate_B);
-	if (!ret)
-		/* phy calibrated, but yet to be started */
-		phy_common->is_started = false;
-
-	return ret;
-}
-
-static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy)
-{
-	return 0;
-}
-
 static
 int ufs_qcom_phy_qmp_14nm_set_mode(struct phy *generic_phy,
 				   enum phy_mode mode, int submode)
@@ -132,8 +102,6 @@ static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
 }
 
 static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = {
-	.init		= ufs_qcom_phy_qmp_14nm_init,
-	.exit		= ufs_qcom_phy_qmp_14nm_exit,
 	.power_on	= ufs_qcom_phy_power_on,
 	.power_off	= ufs_qcom_phy_power_off,
 	.set_mode	= ufs_qcom_phy_qmp_14nm_set_mode,
@@ -141,6 +109,7 @@ static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = {
 };
 
 static struct ufs_qcom_phy_specific_ops phy_14nm_ops = {
+	.calibrate		= ufs_qcom_phy_qmp_14nm_phy_calibrate,
 	.start_serdes		= ufs_qcom_phy_qmp_14nm_start_serdes,
 	.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_14nm_is_pcs_ready,
 	.set_tx_lane_enable	= ufs_qcom_phy_qmp_14nm_set_tx_lane_enable,