pcmcia: Remove m8xx_pcmcia driver

This driver doesn't build, and apparently has not built since
arch/ppc was removed in 2008 (when mk_int_int_mask was removed
from asm/irq.h, among other build errors).

A few weeks ago I asked whether anyone was actively maintaining
this code, and got no positive response:
http://patchwork.ozlabs.org/patch/352082/

So, let's remove it.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Vitaly Bordug <vitb@kernel.crashing.org>
Cc: linux-pcmcia@lists.infradead.org
Cc: Paul Bolle <pebolle@tiscali.nl>

3 files changed, 0 insertions, 1179 deletions

diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 0c657d6af03d..087d7d7eda76 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -144,16 +144,6 @@ config TCIC
 	  "Bridge" is the name used for the hardware inside your computer that
 	  PCMCIA cards are plugged into. If unsure, say N.
 
-config PCMCIA_M8XX
-	tristate "MPC8xx PCMCIA support"
-	depends on PCCARD && PPC && 8xx
-	select PCCARD_IODYN if PCMCIA != n
-	help
-	  Say Y here to include support for PowerPC 8xx series PCMCIA
-	  controller.
-
-	  This driver is also available as a module called m8xx_pcmcia.
-
 config PCMCIA_ALCHEMY_DEVBOARD
 	tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
 	depends on MIPS_ALCHEMY && PCMCIA
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 7745b512a87c..e62c26bc7a5f 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_PD6729)				+= pd6729.o
 obj-$(CONFIG_I82365)				+= i82365.o
 obj-$(CONFIG_I82092)				+= i82092.o
 obj-$(CONFIG_TCIC)				+= tcic.o
-obj-$(CONFIG_PCMCIA_M8XX)			+= m8xx_pcmcia.o
 obj-$(CONFIG_PCMCIA_SOC_COMMON)			+= soc_common.o
 obj-$(CONFIG_PCMCIA_SA11XX_BASE)		+= sa11xx_base.o
 obj-$(CONFIG_PCMCIA_SA1100)			+= sa1100_cs.o
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
deleted file mode 100644
index 182034d2ef58..000000000000
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ /dev/null
@@ -1,1168 +0,0 @@
-/*
- * m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series.
- *
- * (C) 1999-2000 Magnus Damm <damm@opensource.se>
- * (C) 2001-2002 Montavista Software, Inc.
- *     <mlocke@mvista.com>
- *
- * Support for two slots by Cyclades Corporation
- *     <oliver.kurth@cyclades.de>
- * Further fixes, v2.6 kernel port
- *     <marcelo.tosatti@cyclades.com>
- * 
- * Some fixes, additions (C) 2005-2007 Montavista Software, Inc.
- *     <vbordug@ru.mvista.com>
- *
- * "The ExCA standard specifies that socket controllers should provide
- * two IO and five memory windows per socket, which can be independently
- * configured and positioned in the host address space and mapped to
- * arbitrary segments of card address space. " - David A Hinds. 1999
- *
- * This controller does _not_ meet the ExCA standard.
- *
- * m8xx pcmcia controller brief info:
- * + 8 windows (attrib, mem, i/o)
- * + up to two slots (SLOT_A and SLOT_B)
- * + inputpins, outputpins, event and mask registers.
- * - no offset register. sigh.
- *
- * Because of the lacking offset register we must map the whole card.
- * We assign each memory window PCMCIA_MEM_WIN_SIZE address space.
- * Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO
- * * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE.
- * The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE.
- * They are maximum 64KByte each...
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/string.h>
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/timer.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/fsl_devices.h>
-#include <linux/bitops.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-
-#include <asm/io.h>
-#include <asm/time.h>
-#include <asm/mpc8xx.h>
-#include <asm/8xx_immap.h>
-#include <asm/irq.h>
-#include <asm/fs_pd.h>
-
-#include <pcmcia/ss.h>
-
-#define pcmcia_info(args...) printk(KERN_INFO "m8xx_pcmcia: "args)
-#define pcmcia_error(args...) printk(KERN_ERR "m8xx_pcmcia: "args)
-
-static const char *version = "Version 0.06, Aug 2005";
-MODULE_LICENSE("Dual MPL/GPL");
-
-#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B)
-
-/* The ADS board use SLOT_A */
-#ifdef CONFIG_ADS
-#define CONFIG_PCMCIA_SLOT_A
-#define CONFIG_BD_IS_MHZ
-#endif
-
-/* The FADS series are a mess */
-#ifdef CONFIG_FADS
-#if defined(CONFIG_MPC860T) || defined(CONFIG_MPC860) || defined(CONFIG_MPC821)
-#define CONFIG_PCMCIA_SLOT_A
-#else
-#define CONFIG_PCMCIA_SLOT_B
-#endif
-#endif
-
-#if defined(CONFIG_MPC885ADS)
-#define CONFIG_PCMCIA_SLOT_A
-#define PCMCIA_GLITCHY_CD
-#endif
-
-/* Cyclades ACS uses both slots */
-#ifdef CONFIG_PRxK
-#define CONFIG_PCMCIA_SLOT_A
-#define CONFIG_PCMCIA_SLOT_B
-#endif
-
-#endif				/* !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) */
-
-#if defined(CONFIG_PCMCIA_SLOT_A) && defined(CONFIG_PCMCIA_SLOT_B)
-
-#define PCMCIA_SOCKETS_NO 2
-/* We have only 8 windows, dualsocket support will be limited. */
-#define PCMCIA_MEM_WIN_NO 2
-#define PCMCIA_IO_WIN_NO  2
-#define PCMCIA_SLOT_MSG "SLOT_A and SLOT_B"
-
-#elif defined(CONFIG_PCMCIA_SLOT_A) || defined(CONFIG_PCMCIA_SLOT_B)
-
-#define PCMCIA_SOCKETS_NO 1
-/* full support for one slot */
-#define PCMCIA_MEM_WIN_NO 5
-#define PCMCIA_IO_WIN_NO  2
-
-/* define _slot_ to be able to optimize macros */
-
-#ifdef CONFIG_PCMCIA_SLOT_A
-#define _slot_ 0
-#define PCMCIA_SLOT_MSG "SLOT_A"
-#else
-#define _slot_ 1
-#define PCMCIA_SLOT_MSG "SLOT_B"
-#endif
-
-#else
-#error m8xx_pcmcia: Bad configuration!
-#endif
-
-/* ------------------------------------------------------------------------- */
-
-#define PCMCIA_MEM_WIN_BASE 0xe0000000	/* base address for memory window 0   */
-#define PCMCIA_MEM_WIN_SIZE 0x04000000	/* each memory window is 64 MByte     */
-#define PCMCIA_IO_WIN_BASE  _IO_BASE	/* base address for io window 0       */
-/* ------------------------------------------------------------------------- */
-
-static int pcmcia_schlvl;
-
-static DEFINE_SPINLOCK(events_lock);
-
-#define PCMCIA_SOCKET_KEY_5V 1
-#define PCMCIA_SOCKET_KEY_LV 2
-
-/* look up table for pgcrx registers */
-static u32 *m8xx_pgcrx[2];
-
-/*
- * This structure is used to address each window in the PCMCIA controller.
- *
- * Keep in mind that we assume that pcmcia_win[n+1] is mapped directly
- * after pcmcia_win[n]...
- */
-
-struct pcmcia_win {
-	u32 br;
-	u32 or;
-};
-
-/*
- * For some reason the hardware guys decided to make both slots share
- * some registers.
- *
- * Could someone invent object oriented hardware ?
- *
- * The macros are used to get the right bit from the registers.
- * SLOT_A : slot = 0
- * SLOT_B : slot = 1
- */
-
-#define M8XX_PCMCIA_VS1(slot)      (0x80000000 >> (slot << 4))
-#define M8XX_PCMCIA_VS2(slot)      (0x40000000 >> (slot << 4))
-#define M8XX_PCMCIA_VS_MASK(slot)  (0xc0000000 >> (slot << 4))
-#define M8XX_PCMCIA_VS_SHIFT(slot) (30 - (slot << 4))
-
-#define M8XX_PCMCIA_WP(slot)       (0x20000000 >> (slot << 4))
-#define M8XX_PCMCIA_CD2(slot)      (0x10000000 >> (slot << 4))
-#define M8XX_PCMCIA_CD1(slot)      (0x08000000 >> (slot << 4))
-#define M8XX_PCMCIA_BVD2(slot)     (0x04000000 >> (slot << 4))
-#define M8XX_PCMCIA_BVD1(slot)     (0x02000000 >> (slot << 4))
-#define M8XX_PCMCIA_RDY(slot)      (0x01000000 >> (slot << 4))
-#define M8XX_PCMCIA_RDY_L(slot)    (0x00800000 >> (slot << 4))
-#define M8XX_PCMCIA_RDY_H(slot)    (0x00400000 >> (slot << 4))
-#define M8XX_PCMCIA_RDY_R(slot)    (0x00200000 >> (slot << 4))
-#define M8XX_PCMCIA_RDY_F(slot)    (0x00100000 >> (slot << 4))
-#define M8XX_PCMCIA_MASK(slot)     (0xFFFF0000 >> (slot << 4))
-
-#define M8XX_PCMCIA_POR_VALID    0x00000001
-#define M8XX_PCMCIA_POR_WRPROT   0x00000002
-#define M8XX_PCMCIA_POR_ATTRMEM  0x00000010
-#define M8XX_PCMCIA_POR_IO       0x00000018
-#define M8XX_PCMCIA_POR_16BIT    0x00000040
-
-#define M8XX_PGCRX(slot)  m8xx_pgcrx[slot]
-
-#define M8XX_PGCRX_CXOE    0x00000080
-#define M8XX_PGCRX_CXRESET 0x00000040
-
-/* we keep one lookup table per socket to check flags */
-
-#define PCMCIA_EVENTS_MAX 5	/* 4 max at a time + termination */
-
-struct event_table {
-	u32 regbit;
-	u32 eventbit;
-};
-
-static const char driver_name[] = "m8xx-pcmcia";
-
-struct socket_info {
-	void (*handler) (void *info, u32 events);
-	void *info;
-
-	u32 slot;
-	pcmconf8xx_t *pcmcia;
-	u32 bus_freq;
-	int hwirq;
-
-	socket_state_t state;
-	struct pccard_mem_map mem_win[PCMCIA_MEM_WIN_NO];
-	struct pccard_io_map io_win[PCMCIA_IO_WIN_NO];
-	struct event_table events[PCMCIA_EVENTS_MAX];
-	struct pcmcia_socket socket;
-};
-
-static struct socket_info socket[PCMCIA_SOCKETS_NO];
-
-/*
- * Search this table to see if the windowsize is
- * supported...
- */
-
-#define M8XX_SIZES_NO 32
-
-static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] = {
-	0x00000001, 0x00000002, 0x00000008, 0x00000004,
-	0x00000080, 0x00000040, 0x00000010, 0x00000020,
-	0x00008000, 0x00004000, 0x00001000, 0x00002000,
-	0x00000100, 0x00000200, 0x00000800, 0x00000400,
-
-	0x0fffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0x01000000, 0x02000000, 0xffffffff, 0x04000000,
-	0x00010000, 0x00020000, 0x00080000, 0x00040000,
-	0x00800000, 0x00400000, 0x00100000, 0x00200000
-};
-
-/* ------------------------------------------------------------------------- */
-
-static irqreturn_t m8xx_interrupt(int irq, void *dev);
-
-#define PCMCIA_BMT_LIMIT (15*4)	/* Bus Monitor Timeout value */
-
-/* FADS Boards from Motorola                                               */
-
-#if defined(CONFIG_FADS)
-
-#define PCMCIA_BOARD_MSG "FADS"
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
-	u32 reg = 0;
-
-	switch (vcc) {
-	case 0:
-		break;
-	case 33:
-		reg |= BCSR1_PCCVCC0;
-		break;
-	case 50:
-		reg |= BCSR1_PCCVCC1;
-		break;
-	default:
-		return 1;
-	}
-
-	switch (vpp) {
-	case 0:
-		break;
-	case 33:
-	case 50:
-		if (vcc == vpp)
-			reg |= BCSR1_PCCVPP1;
-		else
-			return 1;
-		break;
-	case 120:
-		if ((vcc == 33) || (vcc == 50))
-			reg |= BCSR1_PCCVPP0;
-		else
-			return 1;
-	default:
-		return 1;
-	}
-
-	/* first, turn off all power */
-	out_be32((u32 *) BCSR1,
-		 in_be32((u32 *) BCSR1) & ~(BCSR1_PCCVCC_MASK |
-					    BCSR1_PCCVPP_MASK));
-
-	/* enable new powersettings */
-	out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) | reg);
-
-	return 0;
-}
-
-#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-
-static void hardware_enable(int slot)
-{
-	out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) & ~BCSR1_PCCEN);
-}
-
-static void hardware_disable(int slot)
-{
-	out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) | BCSR1_PCCEN);
-}
-
-#endif
-
-/* MPC885ADS Boards */
-
-#if defined(CONFIG_MPC885ADS)
-
-#define PCMCIA_BOARD_MSG "MPC885ADS"
-#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-
-static inline void hardware_enable(int slot)
-{
-	m8xx_pcmcia_ops.hw_ctrl(slot, 1);
-}
-
-static inline void hardware_disable(int slot)
-{
-	m8xx_pcmcia_ops.hw_ctrl(slot, 0);
-}
-
-static inline int voltage_set(int slot, int vcc, int vpp)
-{
-	return m8xx_pcmcia_ops.voltage_set(slot, vcc, vpp);
-}
-
-#endif
-
-#if defined(CONFIG_PRxK)
-#include <asm/cpld.h>
-extern volatile fpga_pc_regs *fpga_pc;
-
-#define PCMCIA_BOARD_MSG "MPC855T"
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
-	u8 reg = 0;
-	u8 regread;
-	cpld_regs *ccpld = get_cpld();
-
-	switch (vcc) {
-	case 0:
-		break;
-	case 33:
-		reg |= PCMCIA_VCC_33;
-		break;
-	case 50:
-		reg |= PCMCIA_VCC_50;
-		break;
-	default:
-		return 1;
-	}
-
-	switch (vpp) {
-	case 0:
-		break;
-	case 33:
-	case 50:
-		if (vcc == vpp)
-			reg |= PCMCIA_VPP_VCC;
-		else
-			return 1;
-		break;
-	case 120:
-		if ((vcc == 33) || (vcc == 50))
-			reg |= PCMCIA_VPP_12;
-		else
-			return 1;
-	default:
-		return 1;
-	}
-
-	reg = reg >> (slot << 2);
-	regread = in_8(&ccpld->fpga_pc_ctl);
-	if (reg !=
-	    (regread & ((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2)))) {
-		/* enable new powersettings */
-		regread =
-		    regread & ~((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >>
-				(slot << 2));
-		out_8(&ccpld->fpga_pc_ctl, reg | regread);
-		msleep(100);
-	}
-
-	return 0;
-}
-
-#define socket_get(_slot_) PCMCIA_SOCKET_KEY_LV
-#define hardware_enable(_slot_)	/* No hardware to enable */
-#define hardware_disable(_slot_)	/* No hardware to disable */
-
-#endif				/* CONFIG_PRxK */
-
-static u32 pending_events[PCMCIA_SOCKETS_NO];
-static DEFINE_SPINLOCK(pending_event_lock);
-
-static irqreturn_t m8xx_interrupt(int irq, void *dev)
-{
-	struct socket_info *s;
-	struct event_table *e;
-	unsigned int i, events, pscr, pipr, per;
-	pcmconf8xx_t *pcmcia = socket[0].pcmcia;
-
-	pr_debug("m8xx_pcmcia: Interrupt!\n");
-	/* get interrupt sources */
-
-	pscr = in_be32(&pcmcia->pcmc_pscr);
-	pipr = in_be32(&pcmcia->pcmc_pipr);
-	per = in_be32(&pcmcia->pcmc_per);
-
-	for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
-		s = &socket[i];
-		e = &s->events[0];
-		events = 0;
-
-		while (e->regbit) {
-			if (pscr & e->regbit)
-				events |= e->eventbit;
-
-			e++;
-		}
-
-		/*
-		 * report only if both card detect signals are the same
-		 * not too nice done,
-		 * we depend on that CD2 is the bit to the left of CD1...
-		 */
-		if (events & SS_DETECT)
-			if (((pipr & M8XX_PCMCIA_CD2(i)) >> 1) ^
-			    (pipr & M8XX_PCMCIA_CD1(i))) {
-				events &= ~SS_DETECT;
-			}
-#ifdef PCMCIA_GLITCHY_CD
-		/*
-		 * I've experienced CD problems with my ADS board.
-		 * We make an extra check to see if there was a
-		 * real change of Card detection.
-		 */
-
-		if ((events & SS_DETECT) &&
-		    ((pipr &
-		      (M8XX_PCMCIA_CD2(i) | M8XX_PCMCIA_CD1(i))) == 0) &&
-		    (s->state.Vcc | s->state.Vpp)) {
-			events &= ~SS_DETECT;
-			/*printk( "CD glitch workaround - CD = 0x%08x!\n",
-			   (pipr & (M8XX_PCMCIA_CD2(i)
-			   | M8XX_PCMCIA_CD1(i)))); */
-		}
-#endif
-
-		/* call the handler */
-
-		pr_debug("m8xx_pcmcia: slot %u: events = 0x%02x, pscr = 0x%08x, "
-			"pipr = 0x%08x\n", i, events, pscr, pipr);
-
-		if (events) {
-			spin_lock(&pending_event_lock);
-			pending_events[i] |= events;
-			spin_unlock(&pending_event_lock);
-			/*
-			 * Turn off RDY_L bits in the PER mask on
-			 * CD interrupt receival.
-			 *
-			 * They can generate bad interrupts on the
-			 * ACS4,8,16,32.   - marcelo
-			 */
-			per &= ~M8XX_PCMCIA_RDY_L(0);
-			per &= ~M8XX_PCMCIA_RDY_L(1);
-
-			out_be32(&pcmcia->pcmc_per, per);
-
-			if (events)
-				pcmcia_parse_events(&socket[i].socket, events);
-		}
-	}
-
-	/* clear the interrupt sources */
-	out_be32(&pcmcia->pcmc_pscr, pscr);
-
-	pr_debug("m8xx_pcmcia: Interrupt done.\n");
-
-	return IRQ_HANDLED;
-}
-
-static u32 m8xx_get_graycode(u32 size)
-{
-	u32 k;
-
-	for (k = 0; k < M8XX_SIZES_NO; k++)
-		if (m8xx_size_to_gray[k] == size)
-			break;
-
-	if ((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1))
-		k = -1;
-
-	return k;
-}
-
-static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq)
-{
-	u32 reg, clocks, psst, psl, psht;
-
-	if (!ns) {
-
-		/*
-		 * We get called with IO maps setup to 0ns
-		 * if not specified by the user.
-		 * They should be 255ns.
-		 */
-
-		if (is_io)
-			ns = 255;
-		else
-			ns = 100;	/* fast memory if 0 */
-	}
-
-	/*
-	 * In PSST, PSL, PSHT fields we tell the controller
-	 * timing parameters in CLKOUT clock cycles.
-	 * CLKOUT is the same as GCLK2_50.
-	 */
-
-/* how we want to adjust the timing - in percent */
-
-#define ADJ 180			/* 80 % longer accesstime - to be sure */
-
-	clocks = ((bus_freq / 1000) * ns) / 1000;
-	clocks = (clocks * ADJ) / (100 * 1000);
-	if (clocks >= PCMCIA_BMT_LIMIT) {
-		printk("Max access time limit reached\n");
-		clocks = PCMCIA_BMT_LIMIT - 1;
-	}
-
-	psst = clocks / 7;	/* setup time */
-	psht = clocks / 7;	/* hold time */
-	psl = (clocks * 5) / 7;	/* strobe length */
-
-	psst += clocks - (psst + psht + psl);
-
-	reg = psst << 12;
-	reg |= psl << 7;
-	reg |= psht << 16;
-
-	return reg;
-}
-
-static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value)
-{
-	int lsock = container_of(sock, struct socket_info, socket)->slot;
-	struct socket_info *s = &socket[lsock];
-	unsigned int pipr, reg;
-	pcmconf8xx_t *pcmcia = s->pcmcia;
-
-	pipr = in_be32(&pcmcia->pcmc_pipr);
-
-	*value = ((pipr & (M8XX_PCMCIA_CD1(lsock)
-			   | M8XX_PCMCIA_CD2(lsock))) == 0) ? SS_DETECT : 0;
-	*value |= (pipr & M8XX_PCMCIA_WP(lsock)) ? SS_WRPROT : 0;
-
-	if (s->state.flags & SS_IOCARD)
-		*value |= (pipr & M8XX_PCMCIA_BVD1(lsock)) ? SS_STSCHG : 0;
-	else {
-		*value |= (pipr & M8XX_PCMCIA_RDY(lsock)) ? SS_READY : 0;
-		*value |= (pipr & M8XX_PCMCIA_BVD1(lsock)) ? SS_BATDEAD : 0;
-		*value |= (pipr & M8XX_PCMCIA_BVD2(lsock)) ? SS_BATWARN : 0;
-	}
-
-	if (s->state.Vcc | s->state.Vpp)
-		*value |= SS_POWERON;
-
-	/*
-	 * Voltage detection:
-	 * This driver only supports 16-Bit pc-cards.
-	 * Cardbus is not handled here.
-	 *
-	 * To determine what voltage to use we must read the VS1 and VS2 pin.
-	 * Depending on what socket type is present,
-	 * different combinations mean different things.
-	 *
-	 * Card Key  Socket Key   VS1   VS2   Card         Vcc for CIS parse
-	 *
-	 * 5V        5V, LV*      NC    NC    5V only       5V (if available)
-	 *
-	 * 5V        5V, LV*      GND   NC    5 or 3.3V     as low as possible
-	 *
-	 * 5V        5V, LV*      GND   GND   5, 3.3, x.xV  as low as possible
-	 *
-	 * LV*       5V            -     -    shall not fit into socket
-	 *
-	 * LV*       LV*          GND   NC    3.3V only     3.3V
-	 *
-	 * LV*       LV*          NC    GND   x.xV          x.xV (if avail.)
-	 *
-	 * LV*       LV*          GND   GND   3.3 or x.xV   as low as possible
-	 *
-	 * *LV means Low Voltage
-	 *
-	 *
-	 * That gives us the following table:
-	 *
-	 * Socket    VS1  VS2   Voltage
-	 *
-	 * 5V        NC   NC    5V
-	 * 5V        NC   GND   none (should not be possible)
-	 * 5V        GND  NC    >= 3.3V
-	 * 5V        GND  GND   >= x.xV
-	 *
-	 * LV        NC   NC    5V   (if available)
-	 * LV        NC   GND   x.xV (if available)
-	 * LV        GND  NC    3.3V
-	 * LV        GND  GND   >= x.xV
-	 *
-	 * So, how do I determine if I have a 5V or a LV
-	 * socket on my board?  Look at the socket!
-	 *
-	 *
-	 * Socket with 5V key:
-	 * ++--------------------------------------------+
-	 * ||                                            |
-	 * ||                                           ||
-	 * ||                                           ||
-	 * |                                             |
-	 * +---------------------------------------------+
-	 *
-	 * Socket with LV key:
-	 * ++--------------------------------------------+
-	 * ||                                            |
-	 * |                                            ||
-	 * |                                            ||
-	 * |                                             |
-	 * +---------------------------------------------+
-	 *
-	 *
-	 * With other words - LV only cards does not fit
-	 * into the 5V socket!
-	 */
-
-	/* read out VS1 and VS2 */
-
-	reg = (pipr & M8XX_PCMCIA_VS_MASK(lsock))
-	    >> M8XX_PCMCIA_VS_SHIFT(lsock);
-
-	if (socket_get(lsock) == PCMCIA_SOCKET_KEY_LV) {
-		switch (reg) {
-		case 1:
-			*value |= SS_3VCARD;
-			break;	/* GND, NC - 3.3V only */
-		case 2:
-			*value |= SS_XVCARD;
-			break;	/* NC. GND - x.xV only */
-		};
-	}
-
-	pr_debug("m8xx_pcmcia: GetStatus(%d) = %#2.2x\n", lsock, *value);
-	return 0;
-}
-
-static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t * state)
-{
-	int lsock = container_of(sock, struct socket_info, socket)->slot;
-	struct socket_info *s = &socket[lsock];
-	struct event_table *e;
-	unsigned int reg;
-	unsigned long flags;
-	pcmconf8xx_t *pcmcia = socket[0].pcmcia;
-
-	pr_debug("m8xx_pcmcia: SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
-		"io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags,
-		state->Vcc, state->Vpp, state->io_irq, state->csc_mask);
-
-	/* First, set voltage - bail out if invalid */
-	if (voltage_set(lsock, state->Vcc, state->Vpp))
-		return -EINVAL;
-
-	/* Take care of reset... */
-	if (state->flags & SS_RESET)
-		out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXRESET);	/* active high */
-	else
-		out_be32(M8XX_PGCRX(lsock),
-			 in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXRESET);
-
-	/* ... and output enable. */
-
-	/* The CxOE signal is connected to a 74541 on the ADS.
-	   I guess most other boards used the ADS as a reference.
-	   I tried to control the CxOE signal with SS_OUTPUT_ENA,
-	   but the reset signal seems connected via the 541.
-	   If the CxOE is left high are some signals tristated and
-	   no pullups are present -> the cards act weird.
-	   So right now the buffers are enabled if the power is on. */
-
-	if (state->Vcc || state->Vpp)
-		out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXOE);	/* active low */
-	else
-		out_be32(M8XX_PGCRX(lsock),
-			 in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXOE);
-
-	/*
-	 * We'd better turn off interrupts before
-	 * we mess with the events-table..
-	 */
-
-	spin_lock_irqsave(&events_lock, flags);
-
-	/*
-	 * Play around with the interrupt mask to be able to
-	 * give the events the generic pcmcia driver wants us to.
-	 */
-
-	e = &s->events[0];
-	reg = 0;
-
-	if (state->csc_mask & SS_DETECT) {
-		e->eventbit = SS_DETECT;
-		reg |= e->regbit = (M8XX_PCMCIA_CD2(lsock)
-				    | M8XX_PCMCIA_CD1(lsock));
-		e++;
-	}
-	if (state->flags & SS_IOCARD) {
-		/*
-		 * I/O card
-		 */
-		if (state->csc_mask & SS_STSCHG) {
-			e->eventbit = SS_STSCHG;
-			reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock);
-			e++;
-		}
-		/*
-		 * If io_irq is non-zero we should enable irq.
-		 */
-		if (state->io_irq) {
-			out_be32(M8XX_PGCRX(lsock),
-				 in_be32(M8XX_PGCRX(lsock)) |
-				 mk_int_int_mask(s->hwirq) << 24);
-			/*
-			 * Strange thing here:
-			 * The manual does not tell us which interrupt
-			 * the sources generate.
-			 * Anyhow, I found out that RDY_L generates IREQLVL.
-			 *
-			 * We use level triggerd interrupts, and they don't
-			 * have to be cleared in PSCR in the interrupt handler.
-			 */
-			reg |= M8XX_PCMCIA_RDY_L(lsock);
-		} else
-			out_be32(M8XX_PGCRX(lsock),
-				 in_be32(M8XX_PGCRX(lsock)) & 0x00ffffff);
-	} else {
-		/*
-		 * Memory card
-		 */
-		if (state->csc_mask & SS_BATDEAD) {
-			e->eventbit = SS_BATDEAD;
-			reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock);
-			e++;
-		}
-		if (state->csc_mask & SS_BATWARN) {
-			e->eventbit = SS_BATWARN;
-			reg |= e->regbit = M8XX_PCMCIA_BVD2(lsock);
-			e++;
-		}
-		/* What should I trigger on - low/high,raise,fall? */
-		if (state->csc_mask & SS_READY) {
-			e->eventbit = SS_READY;
-			reg |= e->regbit = 0;	//??
-			e++;
-		}
-	}
-
-	e->regbit = 0;		/* terminate list */
-
-	/*
-	 * Clear the status changed .
-	 * Port A and Port B share the same port.
-	 * Writing ones will clear the bits.
-	 */
-
-	out_be32(&pcmcia->pcmc_pscr, reg);
-
-	/*
-	 * Write the mask.
-	 * Port A and Port B share the same port.
-	 * Need for read-modify-write.
-	 * Ones will enable the interrupt.
-	 */
-
-	reg |=
-	    in_be32(&pcmcia->
-		    pcmc_per) & (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
-	out_be32(&pcmcia->pcmc_per, reg);
-
-	spin_unlock_irqrestore(&events_lock, flags);
-
-	/* copy the struct and modify the copy */
-
-	s->state = *state;
-
-	return 0;
-}
-
-static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
-{
-	int lsock = container_of(sock, struct socket_info, socket)->slot;
-
-	struct socket_info *s = &socket[lsock];
-	struct pcmcia_win *w;
-	unsigned int reg, winnr;
-	pcmconf8xx_t *pcmcia = s->pcmcia;
-
-#define M8XX_SIZE (io->stop - io->start + 1)
-#define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start)
-
-	pr_debug("m8xx_pcmcia: SetIOMap(%d, %d, %#2.2x, %d ns, "
-		"%#4.4llx-%#4.4llx)\n", lsock, io->map, io->flags,
-		io->speed, (unsigned long long)io->start,
-		(unsigned long long)io->stop);
-
-	if ((io->map >= PCMCIA_IO_WIN_NO) || (io->start > 0xffff)
-	    || (io->stop > 0xffff) || (io->stop < io->start))
-		return -EINVAL;
-
-	if ((reg = m8xx_get_graycode(M8XX_SIZE)) == -1)
-		return -EINVAL;
-
-	if (io->flags & MAP_ACTIVE) {
-
-		pr_debug("m8xx_pcmcia: io->flags & MAP_ACTIVE\n");
-
-		winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO)
-		    + (lsock * PCMCIA_IO_WIN_NO) + io->map;
-
-		/* setup registers */
-
-		w = (void *)&pcmcia->pcmc_pbr0;
-		w += winnr;
-
-		out_be32(&w->or, 0);	/* turn off window first */
-		out_be32(&w->br, M8XX_BASE);
-
-		reg <<= 27;
-		reg |= M8XX_PCMCIA_POR_IO | (lsock << 2);
-
-		reg |= m8xx_get_speed(io->speed, 1, s->bus_freq);
-
-		if (io->flags & MAP_WRPROT)
-			reg |= M8XX_PCMCIA_POR_WRPROT;
-
-		/*if(io->flags & (MAP_16BIT | MAP_AUTOSZ)) */
-		if (io->flags & MAP_16BIT)
-			reg |= M8XX_PCMCIA_POR_16BIT;
-
-		if (io->flags & MAP_ACTIVE)
-			reg |= M8XX_PCMCIA_POR_VALID;
-
-		out_be32(&w->or, reg);
-
-		pr_debug("m8xx_pcmcia: Socket %u: Mapped io window %u at "
-			"%#8.8x, OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
-	} else {
-		/* shutdown IO window */
-		winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO)
-		    + (lsock * PCMCIA_IO_WIN_NO) + io->map;
-
-		/* setup registers */
-
-		w = (void *)&pcmcia->pcmc_pbr0;
-		w += winnr;
-
-		out_be32(&w->or, 0);	/* turn off window */
-		out_be32(&w->br, 0);	/* turn off base address */
-
-		pr_debug("m8xx_pcmcia: Socket %u: Unmapped io window %u at "
-			"%#8.8x, OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
-	}
-
-	/* copy the struct and modify the copy */
-	s->io_win[io->map] = *io;
-	s->io_win[io->map].flags &= (MAP_WRPROT | MAP_16BIT | MAP_ACTIVE);
-	pr_debug("m8xx_pcmcia: SetIOMap exit\n");
-
-	return 0;
-}
-
-static int m8xx_set_mem_map(struct pcmcia_socket *sock,
-			    struct pccard_mem_map *mem)
-{
-	int lsock = container_of(sock, struct socket_info, socket)->slot;
-	struct socket_info *s = &socket[lsock];
-	struct pcmcia_win *w;
-	struct pccard_mem_map *old;
-	unsigned int reg, winnr;
-	pcmconf8xx_t *pcmcia = s->pcmcia;
-
-	pr_debug("m8xx_pcmcia: SetMemMap(%d, %d, %#2.2x, %d ns, "
-		"%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags,
-		mem->speed, (unsigned long long)mem->static_start,
-		mem->card_start);
-
-	if ((mem->map >= PCMCIA_MEM_WIN_NO)
-//          || ((mem->s) >= PCMCIA_MEM_WIN_SIZE)
-	    || (mem->card_start >= 0x04000000)
-	    || (mem->static_start & 0xfff)	/* 4KByte resolution */
-	    ||(mem->card_start & 0xfff))
-		return -EINVAL;
-
-	if ((reg = m8xx_get_graycode(PCMCIA_MEM_WIN_SIZE)) == -1) {
-		printk("Cannot set size to 0x%08x.\n", PCMCIA_MEM_WIN_SIZE);
-		return -EINVAL;
-	}
-	reg <<= 27;
-
-	winnr = (lsock * PCMCIA_MEM_WIN_NO) + mem->map;
-
-	/* Setup the window in the pcmcia controller */
-
-	w = (void *)&pcmcia->pcmc_pbr0;
-	w += winnr;
-
-	reg |= lsock << 2;
-
-	reg |= m8xx_get_speed(mem->speed, 0, s->bus_freq);
-
-	if (mem->flags & MAP_ATTRIB)
-		reg |= M8XX_PCMCIA_POR_ATTRMEM;
-
-	if (mem->flags & MAP_WRPROT)
-		reg |= M8XX_PCMCIA_POR_WRPROT;
-
-	if (mem->flags & MAP_16BIT)
-		reg |= M8XX_PCMCIA_POR_16BIT;
-
-	if (mem->flags & MAP_ACTIVE)
-		reg |= M8XX_PCMCIA_POR_VALID;
-
-	out_be32(&w->or, reg);
-
-	pr_debug("m8xx_pcmcia: Socket %u: Mapped memory window %u at %#8.8x, "
-		"OR = %#8.8x.\n", lsock, mem->map, w->br, w->or);
-
-	if (mem->flags & MAP_ACTIVE) {
-		/* get the new base address */
-		mem->static_start = PCMCIA_MEM_WIN_BASE +
-		    (PCMCIA_MEM_WIN_SIZE * winnr)
-		    + mem->card_start;
-	}
-
-	pr_debug("m8xx_pcmcia: SetMemMap(%d, %d, %#2.2x, %d ns, "
-		"%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags,
-		mem->speed, (unsigned long long)mem->static_start,
-		mem->card_start);
-
-	/* copy the struct and modify the copy */
-
-	old = &s->mem_win[mem->map];
-
-	*old = *mem;
-	old->flags &= (MAP_ATTRIB | MAP_WRPROT | MAP_16BIT | MAP_ACTIVE);
-
-	return 0;
-}
-
-static int m8xx_sock_init(struct pcmcia_socket *sock)
-{
-	int i;
-	pccard_io_map io = { 0, 0, 0, 0, 1 };
-	pccard_mem_map mem = { 0, 0, 0, 0, 0, 0 };
-
-	pr_debug("m8xx_pcmcia: sock_init(%d)\n", s);
-
-	m8xx_set_socket(sock, &dead_socket);
-	for (i = 0; i < PCMCIA_IO_WIN_NO; i++) {
-		io.map = i;
-		m8xx_set_io_map(sock, &io);
-	}
-	for (i = 0; i < PCMCIA_MEM_WIN_NO; i++) {
-		mem.map = i;
-		m8xx_set_mem_map(sock, &mem);
-	}
-
-	return 0;
-
-}
-
-static int m8xx_sock_suspend(struct pcmcia_socket *sock)
-{
-	return m8xx_set_socket(sock, &dead_socket);
-}
-
-static struct pccard_operations m8xx_services = {
-	.init = m8xx_sock_init,
-	.suspend = m8xx_sock_suspend,
-	.get_status = m8xx_get_status,
-	.set_socket = m8xx_set_socket,
-	.set_io_map = m8xx_set_io_map,
-	.set_mem_map = m8xx_set_mem_map,
-};
-
-static int __init m8xx_probe(struct platform_device *ofdev)
-{
-	struct pcmcia_win *w;
-	unsigned int i, m, hwirq;
-	pcmconf8xx_t *pcmcia;
-	int status;
-	struct device_node *np = ofdev->dev.of_node;
-
-	pcmcia_info("%s\n", version);
-
-	pcmcia = of_iomap(np, 0);
-	if (pcmcia == NULL)
-		return -EINVAL;
-
-	pcmcia_schlvl = irq_of_parse_and_map(np, 0);
-	hwirq = irq_map[pcmcia_schlvl].hwirq;
-	if (pcmcia_schlvl < 0) {
-		iounmap(pcmcia);
-		return -EINVAL;
-	}
-
-	m8xx_pgcrx[0] = &pcmcia->pcmc_pgcra;
-	m8xx_pgcrx[1] = &pcmcia->pcmc_pgcrb;
-
-	pcmcia_info(PCMCIA_BOARD_MSG " using " PCMCIA_SLOT_MSG
-		    " with IRQ %u  (%d). \n", pcmcia_schlvl, hwirq);
-
-	/* Configure Status change interrupt */
-
-	if (request_irq(pcmcia_schlvl, m8xx_interrupt, IRQF_SHARED,
-			driver_name, socket)) {
-		pcmcia_error("Cannot allocate IRQ %u for SCHLVL!\n",
-			     pcmcia_schlvl);
-		iounmap(pcmcia);
-		return -1;
-	}
-
-	w = (void *)&pcmcia->pcmc_pbr0;
-
-	out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
-	clrbits32(&pcmcia->pcmc_per, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
-
-	/* connect interrupt and disable CxOE */
-
-	out_be32(M8XX_PGCRX(0),
-		 M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
-	out_be32(M8XX_PGCRX(1),
-		 M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
-
-	/* initialize the fixed memory windows */
-
-	for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
-		for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
-			out_be32(&w->br, PCMCIA_MEM_WIN_BASE +
-				 (PCMCIA_MEM_WIN_SIZE
-				  * (m + i * PCMCIA_MEM_WIN_NO)));
-
-			out_be32(&w->or, 0);	/* set to not valid */
-
-			w++;
-		}
-	}
-
-	/* turn off voltage */
-	voltage_set(0, 0, 0);
-	voltage_set(1, 0, 0);
-
-	/* Enable external hardware */
-	hardware_enable(0);
-	hardware_enable(1);
-
-	for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
-		socket[i].slot = i;
-		socket[i].socket.owner = THIS_MODULE;
-		socket[i].socket.features =
-		    SS_CAP_PCCARD | SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP;
-		socket[i].socket.irq_mask = 0x000;
-		socket[i].socket.map_size = 0x1000;
-		socket[i].socket.io_offset = 0;
-		socket[i].socket.pci_irq = pcmcia_schlvl;
-		socket[i].socket.ops = &m8xx_services;
-		socket[i].socket.resource_ops = &pccard_iodyn_ops;
-		socket[i].socket.cb_dev = NULL;
-		socket[i].socket.dev.parent = &ofdev->dev;
-		socket[i].pcmcia = pcmcia;
-		socket[i].bus_freq = ppc_proc_freq;
-		socket[i].hwirq = hwirq;
-
-	}
-
-	for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
-		status = pcmcia_register_socket(&socket[i].socket);
-		if (status < 0)
-			pcmcia_error("Socket register failed\n");
-	}
-
-	return 0;
-}
-
-static int m8xx_remove(struct platform_device *ofdev)
-{
-	u32 m, i;
-	struct pcmcia_win *w;
-	pcmconf8xx_t *pcmcia = socket[0].pcmcia;
-
-	for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
-		w = (void *)&pcmcia->pcmc_pbr0;
-
-		out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(i));
-		out_be32(&pcmcia->pcmc_per,
-			 in_be32(&pcmcia->pcmc_per) & ~M8XX_PCMCIA_MASK(i));
-
-		/* turn off interrupt and disable CxOE */
-		out_be32(M8XX_PGCRX(i), M8XX_PGCRX_CXOE);
-
-		/* turn off memory windows */
-		for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
-			out_be32(&w->or, 0);	/* set to not valid */
-			w++;
-		}
-
-		/* turn off voltage */
-		voltage_set(i, 0, 0);
-
-		/* disable external hardware */
-		hardware_disable(i);
-	}
-	for (i = 0; i < PCMCIA_SOCKETS_NO; i++)
-		pcmcia_unregister_socket(&socket[i].socket);
-	iounmap(pcmcia);
-
-	free_irq(pcmcia_schlvl, NULL);
-
-	return 0;
-}
-
-static const struct of_device_id m8xx_pcmcia_match[] = {
-	{
-	 .type = "pcmcia",
-	 .compatible = "fsl,pq-pcmcia",
-	 },
-	{},
-};
-
-MODULE_DEVICE_TABLE(of, m8xx_pcmcia_match);
-
-static struct platform_driver m8xx_pcmcia_driver = {
-	.driver = {
-		.name = driver_name,
-		.owner = THIS_MODULE,
-		.of_match_table = m8xx_pcmcia_match,
-	},
-	.probe = m8xx_probe,
-	.remove = m8xx_remove,
-};
-
-module_platform_driver(m8xx_pcmcia_driver);