Merge tag 'for-4.21' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:
 "Included in this update:

   - Florian Fainelli noticed that userspace segfaults caused by the
     lack of kernel-userspace helpers was hard to diagnose; we now issue
     a warning when userspace tries to use the helpers but the kernel
     has them disabled.

   - Ben Dooks wants compatibility for the old ATAG serial number with
     DT systems.

   - Some cleanup of assembly by Nicolas Pitre.

   - User accessors optimisation from Vincent Whitchurch.

   - More robust kdump on SMP systems from Yufen Wang.

   - Sebastian Andrzej Siewior noticed problems with the SMP "boot_lock"
     on RT kernels, and so we convert the Versatile series of platforms
     to use a raw spinlock instead, consolidating the Versatile
     implementation. We entirely remove the boot_lock on OMAP systems,
     where it's unnecessary. Further patches for other systems will be
     submitted for the following merge window.

   - Start switching old StrongARM-11x0 systems to use gpiolib rather
     than their private GPIO implementation - mostly PCMCIA bits.

   - ARM Kconfig cleanups.

   - Cleanup a mostly harmless mistake in the recent Spectre patch in
     4.20 (which had the effect that data that can be placed into the
     init sections was incorrectly always placed in the rodata section)"

* tag 'for-4.21' of git://git.armlinux.org.uk/~rmk/linux-arm: (25 commits)
  ARM: omap2: remove unnecessary boot_lock
  ARM: versatile: rename and comment SMP implementation
  ARM: versatile: convert boot_lock to raw
  ARM: vexpress/realview: consolidate immitation CPU hotplug
  ARM: fix the cockup in the previous patch
  ARM: sa1100/cerf: switch to using gpio_led_register_device()
  ARM: sa1100/assabet: switch to using gpio leds
  ARM: sa1100/assabet: add gpio keys support for right-hand two buttons
  ARM: sa1111: remove legacy GPIO interfaces
  pcmcia: sa1100*: remove redundant bvd1/bvd2 setting
  ARM: pxa/lubbock: switch PCMCIA to MAX1600 library
  ARM: pxa/mainstone: switch PCMCIA to MAX1600 library and gpiod APIs
  ARM: sa1100/neponset: switch PCMCIA to MAX1600 library and gpiod APIs
  ARM: sa1100/jornada720: switch PCMCIA to gpiod APIs
  pcmcia: add MAX1600 library
  ARM: sa1100: explicitly register sa11x0-pcmcia devices
  ARM: 8813/1: Make aligned 2-byte getuser()/putuser() atomic on ARMv6+
  ARM: 8812/1: Optimise copy_{from/to}_user for !CPU_USE_DOMAINS
  ARM: 8811/1: always list both ldrd/strd registers explicitly
  ARM: 8808/1: kexec:offline panic_smp_self_stop CPU
  ...

1 files changed, 55 insertions, 28 deletions

diff --git a/drivers/pcmcia/sa1111_jornada720.c b/drivers/pcmcia/sa1111_jornada720.c
index 3d4ca87ca76c..1083e1b4f25d 100644
--- a/drivers/pcmcia/sa1111_jornada720.c
+++ b/drivers/pcmcia/sa1111_jornada720.c
@@ -6,29 +6,62 @@
  *
  */
 #include <linux/module.h>
-#include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/errno.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/hardware/sa1111.h>
 #include <asm/mach-types.h>
 
 #include "sa1111_generic.h"
 
-/* Does SOCKET1_3V actually do anything? */
-#define SOCKET0_POWER	GPIO_GPIO0
-#define SOCKET0_3V	GPIO_GPIO2
-#define SOCKET1_POWER	(GPIO_GPIO1 | GPIO_GPIO3)
-#define SOCKET1_3V	GPIO_GPIO3
+/*
+ * Socket 0 power: GPIO A0
+ * Socket 0 3V: GPIO A2
+ * Socket 1 power: GPIO A1 & GPIO A3
+ * Socket 1 3V: GPIO A3
+ * Does Socket 1 3V actually do anything?
+ */
+enum {
+	J720_GPIO_PWR,
+	J720_GPIO_3V,
+	J720_GPIO_MAX,
+};
+struct jornada720_data {
+	struct gpio_desc *gpio[J720_GPIO_MAX];
+};
+
+static int jornada720_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	struct device *dev = skt->socket.dev.parent;
+	struct jornada720_data *j;
+
+	j = devm_kzalloc(dev, sizeof(*j), GFP_KERNEL);
+	if (!j)
+		return -ENOMEM;
+
+	j->gpio[J720_GPIO_PWR] = devm_gpiod_get(dev, skt->nr ? "s1-power" :
+						"s0-power", GPIOD_OUT_LOW);
+	if (IS_ERR(j->gpio[J720_GPIO_PWR]))
+		return PTR_ERR(j->gpio[J720_GPIO_PWR]);
+
+	j->gpio[J720_GPIO_3V] = devm_gpiod_get(dev, skt->nr ? "s1-3v" :
+					       "s0-3v", GPIOD_OUT_LOW);
+	if (IS_ERR(j->gpio[J720_GPIO_3V]))
+		return PTR_ERR(j->gpio[J720_GPIO_3V]);
+
+	skt->driver_data = j;
+
+	return 0;
+}
 
 static int
 jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
 {
-	struct sa1111_pcmcia_socket *s = to_skt(skt);
-	unsigned int pa_dwr_mask, pa_dwr_set;
+	struct jornada720_data *j = skt->driver_data;
+	DECLARE_BITMAP(values, J720_GPIO_MAX) = { 0, };
 	int ret;
 
 	printk(KERN_INFO "%s(): config socket %d vcc %d vpp %d\n", __func__,
@@ -36,35 +69,34 @@ jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_s
 
 	switch (skt->nr) {
 	case 0:
-		pa_dwr_mask = SOCKET0_POWER | SOCKET0_3V;
-
 		switch (state->Vcc) {
 		default:
 		case  0:
-			pa_dwr_set = 0;
+			__assign_bit(J720_GPIO_PWR, values, 0);
+			__assign_bit(J720_GPIO_3V, values, 0);
 			break;
 		case 33:
-			pa_dwr_set = SOCKET0_POWER | SOCKET0_3V;
+			__assign_bit(J720_GPIO_PWR, values, 1);
+			__assign_bit(J720_GPIO_3V, values, 1);
 			break;
 		case 50:
-			pa_dwr_set = SOCKET0_POWER;
+			__assign_bit(J720_GPIO_PWR, values, 1);
+			__assign_bit(J720_GPIO_3V, values, 0);
 			break;
 		}
 		break;
 
 	case 1:
-		pa_dwr_mask = SOCKET1_POWER;
-
 		switch (state->Vcc) {
 		default:
 		case 0:
-			pa_dwr_set = 0;
+			__assign_bit(J720_GPIO_PWR, values, 0);
+			__assign_bit(J720_GPIO_3V, values, 0);
 			break;
 		case 33:
-			pa_dwr_set = SOCKET1_POWER;
-			break;
 		case 50:
-			pa_dwr_set = SOCKET1_POWER;
+			__assign_bit(J720_GPIO_PWR, values, 1);
+			__assign_bit(J720_GPIO_3V, values, 1);
 			break;
 		}
 		break;
@@ -81,13 +113,15 @@ jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_s
 
 	ret = sa1111_pcmcia_configure_socket(skt, state);
 	if (ret == 0)
-		sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
+		ret = gpiod_set_array_value_cansleep(J720_GPIO_MAX, j->gpio,
+						     NULL, values);
 
 	return ret;
 }
 
 static struct pcmcia_low_level jornada720_pcmcia_ops = {
 	.owner			= THIS_MODULE,
+	.hw_init		= jornada720_pcmcia_hw_init,
 	.configure_socket	= jornada720_pcmcia_configure_socket,
 	.first			= 0,
 	.nr			= 2,
@@ -95,16 +129,9 @@ static struct pcmcia_low_level jornada720_pcmcia_ops = {
 
 int pcmcia_jornada720_init(struct sa1111_dev *sadev)
 {
-	unsigned int pin = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3;
-
 	/* Fixme: why messing around with SA11x0's GPIO1? */
 	GRER |= 0x00000002;
 
-	/* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */
-	sa1111_set_io_dir(sadev, pin, 0, 0);
-	sa1111_set_io(sadev, pin, 0);
-	sa1111_set_sleep_io(sadev, pin, 0);
-
 	sa11xx_drv_pcmcia_ops(&jornada720_pcmcia_ops);
 	return sa1111_pcmcia_add(sadev, &jornada720_pcmcia_ops,
 				 sa11xx_drv_pcmcia_add_one);