PCMCIA: sa1111: rename sa1111 socket drivers to have sa1111_ prefix.

Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 0 insertions, 134 deletions

diff --git a/drivers/pcmcia/sa1100_neponset.c b/drivers/pcmcia/sa1100_neponset.c
deleted file mode 100644
index 50f297d850e7..000000000000
--- a/drivers/pcmcia/sa1100_neponset.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * linux/drivers/pcmcia/sa1100_neponset.c
- *
- * Neponset PCMCIA specific routines
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <mach/neponset.h>
-#include <asm/hardware/sa1111.h>
-
-#include "sa1111_generic.h"
-
-/*
- * Neponset uses the Maxim MAX1600, with the following connections:
- *
- *   MAX1600      Neponset
- *
- *    A0VCC        SA-1111 GPIO A<1>
- *    A1VCC        SA-1111 GPIO A<0>
- *    A0VPP        CPLD NCR A0VPP
- *    A1VPP        CPLD NCR A1VPP
- *    B0VCC        SA-1111 GPIO A<2>
- *    B1VCC        SA-1111 GPIO A<3>
- *    B0VPP        ground (slot B is CF)
- *    B1VPP        ground (slot B is CF)
- *
- *     VX          VCC (5V)
- *     VY          VCC3_3 (3.3V)
- *     12INA       12V
- *     12INB       ground (slot B is CF)
- *
- * The MAX1600 CODE pin is tied to ground, placing the device in 
- * "Standard Intel code" mode. Refer to the Maxim data sheet for
- * the corresponding truth table.
- */
-
-static int
-neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
-{
-	struct sa1111_pcmcia_socket *s = to_skt(skt);
-	unsigned int ncr_mask, ncr_set, pa_dwr_mask, pa_dwr_set;
-	int ret;
-
-	switch (skt->nr) {
-	case 0:
-		pa_dwr_mask = GPIO_A0 | GPIO_A1;
-		ncr_mask = NCR_A0VPP | NCR_A1VPP;
-
-		if (state->Vpp == 0)
-			ncr_set = 0;
-		else if (state->Vpp == 120)
-			ncr_set = NCR_A1VPP;
-		else if (state->Vpp == state->Vcc)
-			ncr_set = NCR_A0VPP;
-		else {
-			printk(KERN_ERR "%s(): unrecognized VPP %u\n",
-			       __func__, state->Vpp);
-			return -1;
-		}
-		break;
-
-	case 1:
-		pa_dwr_mask = GPIO_A2 | GPIO_A3;
-		ncr_mask = 0;
-		ncr_set = 0;
-
-		if (state->Vpp != state->Vcc && state->Vpp != 0) {
-			printk(KERN_ERR "%s(): CF slot cannot support VPP %u\n",
-			       __func__, state->Vpp);
-			return -1;
-		}
-		break;
-
-	default:
-		return -1;
-	}
-
-	/*
-	 * pa_dwr_set is the mask for selecting Vcc on both sockets.
-	 * pa_dwr_mask selects which bits (and therefore socket) we change.
-	 */
-	switch (state->Vcc) {
-	default:
-	case 0:  pa_dwr_set = 0;		break;
-	case 33: pa_dwr_set = GPIO_A1|GPIO_A2;	break;
-	case 50: pa_dwr_set = GPIO_A0|GPIO_A3;	break;
-	}
-
-	ret = sa1111_pcmcia_configure_socket(skt, state);
-	if (ret == 0) {
-		unsigned long flags;
-
-		local_irq_save(flags);
-		NCR_0 = (NCR_0 & ~ncr_mask) | ncr_set;
-
-		local_irq_restore(flags);
-		sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
-	}
-
-	return ret;
-}
-
-static struct pcmcia_low_level neponset_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-	.configure_socket	= neponset_pcmcia_configure_socket,
-	.first			= 0,
-	.nr			= 2,
-};
-
-int pcmcia_neponset_init(struct sa1111_dev *sadev)
-{
-	int ret = -ENODEV;
-
-	if (machine_is_assabet()) {
-		/*
-		 * Set GPIO_A<3:0> to be outputs for the MAX1600,
-		 * and switch to standby mode.
-		 */
-		sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
-		sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
-		sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
-		sa11xx_drv_pcmcia_ops(&neponset_pcmcia_ops);
-		ret = sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops,
-				sa11xx_drv_pcmcia_add_one);
-	}
-
-	return ret;
-}