ARM: pxa: move pcmcia board data into mach-pxa

The drivers/pcmcia/pxa2xx_*.c are essentially part of the
board files, but for historic reasons located in drivers/pcmcia.

Move them into the same place as the actual board file to avoid
lots of machine header inclusions.

Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 127 deletions

diff --git a/drivers/pcmcia/pxa2xx_e740.c b/drivers/pcmcia/pxa2xx_e740.c
deleted file mode 100644
index 72caa6d05ab9..000000000000
--- a/drivers/pcmcia/pxa2xx_e740.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Toshiba e740 PCMCIA specific routines.
- *
- * (c) 2004 Ian Molton <spyro@f2s.com>
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <mach/eseries-gpio.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "soc_common.h"
-
-static int e740_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	if (skt->nr == 0) {
-		skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD0;
-		skt->stat[SOC_STAT_CD].name = "CF card detect";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY0;
-		skt->stat[SOC_STAT_RDY].name = "CF ready";
-	} else {
-		skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD1;
-		skt->stat[SOC_STAT_CD].name = "Wifi switch";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY1;
-		skt->stat[SOC_STAT_RDY].name = "Wifi ready";
-	}
-
-	return 0;
-}
-
-static void e740_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int e740_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-					const socket_state_t *state)
-{
-	if (state->flags & SS_RESET) {
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_RST0, 1);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_RST1, 1);
-	} else {
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_RST0, 0);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_RST1, 0);
-	}
-
-	switch (state->Vcc) {
-	case 0:	/* Socket off */
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 0);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 1);
-		break;
-	case 50:
-	case 33: /* socket on */
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 1);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 0);
-		break;
-	default:
-		printk(KERN_ERR "e740_cs: Unsupported Vcc: %d\n", state->Vcc);
-	}
-
-	return 0;
-}
-
-static struct pcmcia_low_level e740_pcmcia_ops = {
-	.owner            = THIS_MODULE,
-	.hw_init          = e740_pcmcia_hw_init,
-	.socket_state     = e740_pcmcia_socket_state,
-	.configure_socket = e740_pcmcia_configure_socket,
-	.nr               = 2,
-};
-
-static struct platform_device *e740_pcmcia_device;
-
-static int __init e740_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_e740())
-		return -ENODEV;
-
-	e740_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!e740_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(e740_pcmcia_device, &e740_pcmcia_ops,
-					sizeof(e740_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(e740_pcmcia_device);
-
-	if (ret)
-		platform_device_put(e740_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit e740_pcmcia_exit(void)
-{
-	platform_device_unregister(e740_pcmcia_device);
-}
-
-module_init(e740_pcmcia_init);
-module_exit(e740_pcmcia_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_DESCRIPTION("e740 PCMCIA platform support");