PCI: Allow specifying devices using a base bus and path of devfns

When specifying PCI devices on the kernel command line using a
bus/device/function address, bus numbers can change when adding or
replacing a device, changing motherboard firmware, or applying kernel
parameters like "pci=assign-buses".  When bus numbers change, it's likely
the command line tweak will be applied to the wrong device.

Therefore, it is useful to be able to specify devices with a base bus
number and the path of devfns needed to get to it, similar to the "device
scope" structure in the Intel VT-d spec, Section 8.3.1.

Thus, we add an option to specify devices in the following format:

  [<domain>:]<bus>:<device>.<func>[/<device>.<func>]*

The path can be any segment within the PCI hierarchy of any length and
determined through the use of 'lspci -t'.  When specified this way, it is
less likely that a renumbered bus will result in a valid device
specification and the tweak won't be applied to the wrong device.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
[bhelgaas: use "device" instead of "slot" in documentation since that's the
usual language in the PCI specs]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>

1 files changed, 97 insertions, 21 deletions

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 1574b2da25e7..a6c38b15ac33 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -192,6 +192,89 @@ EXPORT_SYMBOL_GPL(pci_ioremap_wc_bar);
 #endif
 
 /**
+ * pci_dev_str_match_path - test if a path string matches a device
+ * @dev:    the PCI device to test
+ * @p:      string to match the device against
+ * @endptr: pointer to the string after the match
+ *
+ * Test if a string (typically from a kernel parameter) formatted as a
+ * path of device/function addresses matches a PCI device. The string must
+ * be of the form:
+ *
+ *   [<domain>:]<bus>:<device>.<func>[/<device>.<func>]*
+ *
+ * A path for a device can be obtained using 'lspci -t'.  Using a path
+ * is more robust against bus renumbering than using only a single bus,
+ * device and function address.
+ *
+ * Returns 1 if the string matches the device, 0 if it does not and
+ * a negative error code if it fails to parse the string.
+ */
+static int pci_dev_str_match_path(struct pci_dev *dev, const char *path,
+				  const char **endptr)
+{
+	int ret;
+	int seg, bus, slot, func;
+	char *wpath, *p;
+	char end;
+
+	*endptr = strchrnul(path, ';');
+
+	wpath = kmemdup_nul(path, *endptr - path, GFP_KERNEL);
+	if (!wpath)
+		return -ENOMEM;
+
+	while (1) {
+		p = strrchr(wpath, '/');
+		if (!p)
+			break;
+		ret = sscanf(p, "/%x.%x%c", &slot, &func, &end);
+		if (ret != 2) {
+			ret = -EINVAL;
+			goto free_and_exit;
+		}
+
+		if (dev->devfn != PCI_DEVFN(slot, func)) {
+			ret = 0;
+			goto free_and_exit;
+		}
+
+		/*
+		 * Note: we don't need to get a reference to the upstream
+		 * bridge because we hold a reference to the top level
+		 * device which should hold a reference to the bridge,
+		 * and so on.
+		 */
+		dev = pci_upstream_bridge(dev);
+		if (!dev) {
+			ret = 0;
+			goto free_and_exit;
+		}
+
+		*p = 0;
+	}
+
+	ret = sscanf(wpath, "%x:%x:%x.%x%c", &seg, &bus, &slot,
+		     &func, &end);
+	if (ret != 4) {
+		seg = 0;
+		ret = sscanf(wpath, "%x:%x.%x%c", &bus, &slot, &func, &end);
+		if (ret != 3) {
+			ret = -EINVAL;
+			goto free_and_exit;
+		}
+	}
+
+	ret = (seg == pci_domain_nr(dev->bus) &&
+	       bus == dev->bus->number &&
+	       dev->devfn == PCI_DEVFN(slot, func));
+
+free_and_exit:
+	kfree(wpath);
+	return ret;
+}
+
+/**
  * pci_dev_str_match - test if a string matches a device
  * @dev:    the PCI device to test
  * @p:      string to match the device against
@@ -200,13 +283,16 @@ EXPORT_SYMBOL_GPL(pci_ioremap_wc_bar);
  * Test if a string (typically from a kernel parameter) matches a specified
  * PCI device. The string may be of one of the following formats:
  *
- *   [<domain>:]<bus>:<device>.<func>
+ *   [<domain>:]<bus>:<device>.<func>[/<device>.<func>]*
  *   pci:<vendor>:<device>[:<subvendor>:<subdevice>]
  *
  * The first format specifies a PCI bus/device/function address which
  * may change if new hardware is inserted, if motherboard firmware changes,
  * or due to changes caused in kernel parameters. If the domain is
- * left unspecified, it is taken to be 0.
+ * left unspecified, it is taken to be 0.  In order to be robust against
+ * bus renumbering issues, a path of PCI device/function numbers may be used
+ * to address the specific device.  The path for a device can be determined
+ * through the use of 'lspci -t'.
  *
  * The second format matches devices using IDs in the configuration
  * space which may match multiple devices in the system. A value of 0
@@ -222,7 +308,7 @@ static int pci_dev_str_match(struct pci_dev *dev, const char *p,
 			     const char **endptr)
 {
 	int ret;
-	int seg, bus, slot, func, count;
+	int count;
 	unsigned short vendor, device, subsystem_vendor, subsystem_device;
 
 	if (strncmp(p, "pci:", 4) == 0) {
@@ -248,25 +334,15 @@ static int pci_dev_str_match(struct pci_dev *dev, const char *p,
 		    (!subsystem_device ||
 			    subsystem_device == dev->subsystem_device))
 			goto found;
-
 	} else {
-		/* PCI Bus, Device, Function IDs are specified */
-		ret = sscanf(p, "%x:%x:%x.%x%n", &seg, &bus, &slot,
-			     &func, &count);
-		if (ret != 4) {
-			seg = 0;
-			ret = sscanf(p, "%x:%x.%x%n", &bus, &slot,
-				     &func, &count);
-			if (ret != 3)
-				return -EINVAL;
-		}
-
-		p += count;
-
-		if (seg == pci_domain_nr(dev->bus) &&
-		    bus == dev->bus->number &&
-		    slot == PCI_SLOT(dev->devfn) &&
-		    func == PCI_FUNC(dev->devfn))
+		/*
+		 * PCI Bus, Device, Function IDs are specified
+		 *  (optionally, may include a path of devfns following it)
+		 */
+		ret = pci_dev_str_match_path(dev, p, &p);
+		if (ret < 0)
+			return ret;
+		else if (ret)
 			goto found;
 	}