PCI: Work around Pericom PCIe-to-PCI bridge Retrain Link erratum

Due to an erratum in some Pericom PCIe-to-PCI bridges in reverse mode
(conventional PCI on primary side, PCIe on downstream side), the Retrain
Link bit needs to be cleared manually to allow the link training to
complete successfully.

If it is not cleared manually, the link training is continuously restarted
and no devices below the PCI-to-PCIe bridge can be accessed.  That means
drivers for devices below the bridge will be loaded but won't work and may
even crash because the driver is only reading 0xffff.

See the Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf for
details.  Devices known as affected so far are: PI7C9X110, PI7C9X111SL,
PI7C9X130.

Add a new flag, clear_retrain_link, in struct pci_dev.  Quirks for affected
devices set this bit.

Note that pcie_retrain_link() lives in aspm.c because that's currently the
only place we use it, but this erratum is not specific to ASPM, and we may
retrain links for other reasons in the future.

Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
[bhelgaas: apply regardless of CONFIG_PCIEASPM]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: stable@vger.kernel.org

2 files changed, 26 insertions, 0 deletions

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 4fa37622ad66..38e7017478b5 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -205,6 +205,15 @@ static bool pcie_retrain_link(struct pcie_link_state *link)
 	pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &reg16);
 	reg16 |= PCI_EXP_LNKCTL_RL;
 	pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
+	if (parent->clear_retrain_link) {
+		/*
+		 * Due to an erratum in some devices the Retrain Link bit
+		 * needs to be cleared again manually to allow the link
+		 * training to succeed.
+		 */
+		reg16 &= ~PCI_EXP_LNKCTL_RL;
+		pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
+	}
 
 	/* Wait for link training end. Break out after waiting for timeout */
 	start_jiffies = jiffies;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index a59ad09ce911..6f34e17c98f4 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2245,6 +2245,23 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s);
 
+/*
+ * Some Pericom PCIe-to-PCI bridges in reverse mode need the PCIe Retrain
+ * Link bit cleared after starting the link retrain process to allow this
+ * process to finish.
+ *
+ * Affected devices: PI7C9X110, PI7C9X111SL, PI7C9X130.  See also the
+ * Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf.
+ */
+static void quirk_enable_clear_retrain_link(struct pci_dev *dev)
+{
+	dev->clear_retrain_link = 1;
+	pci_info(dev, "Enable PCIe Retrain Link quirk\n");
+}
+DECLARE_PCI_FIXUP_HEADER(0x12d8, 0xe110, quirk_enable_clear_retrain_link);
+DECLARE_PCI_FIXUP_HEADER(0x12d8, 0xe111, quirk_enable_clear_retrain_link);
+DECLARE_PCI_FIXUP_HEADER(0x12d8, 0xe130, quirk_enable_clear_retrain_link);
+
 static void fixup_rev1_53c810(struct pci_dev *dev)
 {
 	u32 class = dev->class;