diff options
author | Niklas Cassel <cassel@kernel.org> | 2024-04-17 19:42:26 +0300 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2024-08-03 09:54:21 +0300 |
commit | a30211c6704899de0616ac0f97601122d899c86d (patch) | |
tree | e10af12acde9a01ca60e846c9baa61d2b170fe97 /drivers/pci | |
parent | 09b15029a393d9c9caeadc7267677afd030b5235 (diff) | |
download | linux-a30211c6704899de0616ac0f97601122d899c86d.tar.xz |
PCI: dw-rockchip: Fix initial PERST# GPIO value
commit 28b8d7793b8573563b3d45321376f36168d77b1e upstream.
PERST# is active low according to the PCIe specification.
However, the existing pcie-dw-rockchip.c driver does:
gpiod_set_value(..., 0); msleep(100); gpiod_set_value(..., 1);
when asserting + deasserting PERST#.
This is of course wrong, but because all the device trees for this
compatible string have also incorrectly marked this GPIO as ACTIVE_HIGH:
$ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3568*
$ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3588*
The actual toggling of PERST# is correct, and we cannot change it anyway,
since that would break device tree compatibility.
However, this driver does request the GPIO to be initialized as
GPIOD_OUT_HIGH, which does cause a silly sequence where PERST# gets
toggled back and forth for no good reason.
Fix this by requesting the GPIO to be initialized as GPIOD_OUT_LOW (which
for this driver means PERST# asserted).
This will avoid an unnecessary signal change where PERST# gets deasserted
(by devm_gpiod_get_optional()) and then gets asserted (by
rockchip_pcie_start_link()) just a few instructions later.
Before patch, debug prints on EP side, when booting RC:
[ 845.606810] pci: PERST# asserted by host!
[ 852.483985] pci: PERST# de-asserted by host!
[ 852.503041] pci: PERST# asserted by host!
[ 852.610318] pci: PERST# de-asserted by host!
After patch, debug prints on EP side, when booting RC:
[ 125.107921] pci: PERST# asserted by host!
[ 132.111429] pci: PERST# de-asserted by host!
This extra, very short, PERST# assertion + deassertion has been reported to
cause issues with certain WLAN controllers, e.g. RTL8822CE.
Fixes: 0e898eb8df4e ("PCI: rockchip-dwc: Add Rockchip RK356X host controller driver")
Link: https://lore.kernel.org/linux-pci/20240417164227.398901-1-cassel@kernel.org
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof WilczyĆski <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/pci')
-rw-r--r-- | drivers/pci/controller/dwc/pcie-dw-rockchip.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c b/drivers/pci/controller/dwc/pcie-dw-rockchip.c index 2fe42c70097f..9b1256da096c 100644 --- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c +++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c @@ -240,7 +240,7 @@ static int rockchip_pcie_resource_get(struct platform_device *pdev, return PTR_ERR(rockchip->apb_base); rockchip->rst_gpio = devm_gpiod_get_optional(&pdev->dev, "reset", - GPIOD_OUT_HIGH); + GPIOD_OUT_LOW); if (IS_ERR(rockchip->rst_gpio)) return PTR_ERR(rockchip->rst_gpio); |