Merge tag 'master-2014-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
pull request: wireless-next 2014-10-03

Please pull tihs batch of updates intended for the 3.18 stream!

For the iwlwifi bits, Emmanuel says:

"I have here a few things that depend on the latest mac80211's changes:
RRM, TPC, Quiet Period etc...  Eyal keeps improving our rate control
and we have a new device ID. This last patch should probably have
gone to wireless.git, but at that stage, I preferred to send it to
-next and CC stable."

For (most of) the Atheros bits, Kalle says:

"The only new feature is testmode support from me. Ben added a new method
to crash the firmware with an assert for debug purposes. As usual, we
have lots of smaller fixes from Michal. Matteo fixed a Kconfig
dependency with debugfs. I fixed some warnings recently added to
checkpatch."

For the NFC bits, Samuel says:

"We've had major updates for TI and ST Microelectronics drivers, and a
few NCI related changes.

For TI's trf7970a driver:

- Target mode support for trf7970a
- Suspend/resume support for trf7970a
- DT properties additions to handle different quirks
- A bunch of fixes for smartphone IOP related issues

For ST Microelectronics' ST21NFCA and ST21NFCB drivers:

- ISO15693 support for st21nfcb
- checkpatch and sparse related warning fixes
- Code cleanups and a few minor fixes

Finally, Marvell added ISO15693 support to the NCI stack, together with a
couple of NCI fixes."

For the Bluetooth bits, Johan says:

"This 3.18 pull request replaces the one I did on Monday ("bluetooth-next
2014-09-22", which hasn't been pulled yet). The additions since the last
request are:

 - SCO connection fix for devices not supporting eSCO
 - Cleanups regarding the SCO establishment logic
 - Remove unnecessary return value from logging functions
 - Header compression fix for 6lowpan
 - Cleanups to the ieee802154/mrf24j40 driver

Here's a copy from previous request that this one replaces:

'
Here are some more patches for 3.18. They include various fixes to the
btusb HCI driver, a fix for LE SMP, as well as adding Jukka to the
MAINTAINERS file for generic 6LoWPAN (as requested by Alexander Aring).

I've held on to this pull request a bit since we were waiting for a SCO
related fix to get sorted out first. However, since the merge window is
getting closer I decided not to wait for it. If we do get the fix sorted
out there'll probably be a second small pull request later this week.
'"

And,

"Unless 3.17 gets delayed this will probably be our last -next pull request for
3.18. We've got:

  - New Marvell hardware supportr
  - Multicast support for 6lowpan
  - Several of 6lowpan fixes & cleanups
  - Fix for a (false-positive) lockdep warning in L2CAP
  - Minor btusb cleanup"

On top of all that comes the usual sort of updates to ath5k, ath9k,
ath10k, brcmfmac, mwifiex, and wil6210.  This time around there are
also a number of rtlwifi updates to enable some new hardware and
to reconcile the in-kernel drivers with some newer releases of the
Realtek vendor drivers.  Also of note is some device tree work for
the bcma bus.

Please let me know if there are problems!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 14 insertions, 53 deletions

diff --git a/drivers/nfc/st21nfcb/i2c.c b/drivers/nfc/st21nfcb/i2c.c
index 8af880ead5db..c5d2427a3db2 100644
--- a/drivers/nfc/st21nfcb/i2c.c
+++ b/drivers/nfc/st21nfcb/i2c.c
@@ -17,24 +17,16 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-#include <linux/crc-ccitt.h>
 #include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/gpio.h>
 #include <linux/of_irq.h>
 #include <linux/of_gpio.h>
-#include <linux/miscdevice.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/nfc.h>
-#include <linux/firmware.h>
-#include <linux/unaligned/access_ok.h>
 #include <linux/platform_data/st21nfcb.h>
 
-#include <net/nfc/nci.h>
-#include <net/nfc/llc.h>
-#include <net/nfc/nfc.h>
-
 #include "ndlc.h"
 
 #define DRIVER_DESC "NCI NFC driver for ST21NFCB"
@@ -63,12 +55,6 @@ struct st21nfcb_i2c_phy {
 	unsigned int irq_polarity;
 
 	int powered;
-
-	/*
-	 * < 0 if hardware error occured (e.g. i2c err)
-	 * and prevents normal operation.
-	 */
-	int hard_fault;
 };
 
 #define I2C_DUMP_SKB(info, skb)					\
@@ -122,8 +108,8 @@ static int st21nfcb_nci_i2c_write(void *phy_id, struct sk_buff *skb)
 
 	I2C_DUMP_SKB("st21nfcb_nci_i2c_write", skb);
 
-	if (phy->hard_fault != 0)
-		return phy->hard_fault;
+	if (phy->ndlc->hard_fault != 0)
+		return phy->ndlc->hard_fault;
 
 	r = i2c_master_send(client, skb->data, skb->len);
 	if (r == -EREMOTEIO) {  /* Retry, chip was in standby */
@@ -168,11 +154,11 @@ static int st21nfcb_nci_i2c_read(struct st21nfcb_i2c_phy *phy,
 	if (r == -EREMOTEIO) {  /* Retry, chip was in standby */
 		usleep_range(1000, 4000);
 		r = i2c_master_recv(client, buf, ST21NFCB_NCI_I2C_MIN_SIZE);
-	} else if (r != ST21NFCB_NCI_I2C_MIN_SIZE) {
-		nfc_err(&client->dev, "cannot read ndlc & nci header\n");
-		return -EREMOTEIO;
 	}
 
+	if (r != ST21NFCB_NCI_I2C_MIN_SIZE)
+		return -EREMOTEIO;
+
 	len = be16_to_cpu(*(__be16 *) (buf + 2));
 	if (len > ST21NFCB_NCI_I2C_MAX_SIZE) {
 		nfc_err(&client->dev, "invalid frame len\n");
@@ -224,7 +210,7 @@ static irqreturn_t st21nfcb_nci_irq_thread_fn(int irq, void *phy_id)
 	client = phy->i2c_dev;
 	dev_dbg(&client->dev, "IRQ\n");
 
-	if (phy->hard_fault)
+	if (phy->ndlc->hard_fault)
 		return IRQ_HANDLED;
 
 	if (!phy->powered) {
@@ -233,13 +219,8 @@ static irqreturn_t st21nfcb_nci_irq_thread_fn(int irq, void *phy_id)
 	}
 
 	r = st21nfcb_nci_i2c_read(phy, &skb);
-	if (r == -EREMOTEIO) {
-		phy->hard_fault = r;
-                ndlc_recv(phy->ndlc, NULL);
-		return IRQ_HANDLED;
-	} else if (r == -ENOMEM || r == -EBADMSG) {
+	if (r == -EREMOTEIO || r == -ENOMEM || r == -EBADMSG)
 		return IRQ_HANDLED;
-	}
 
 	ndlc_recv(phy->ndlc, skb);
 
@@ -273,25 +254,18 @@ static int st21nfcb_nci_i2c_of_request_resources(struct i2c_client *client)
 	}
 
 	/* GPIO request and configuration */
-	r = devm_gpio_request(&client->dev, gpio, "clf_reset");
+	r = devm_gpio_request_one(&client->dev, gpio,
+				GPIOF_OUT_INIT_HIGH, "clf_reset");
 	if (r) {
 		nfc_err(&client->dev, "Failed to request reset pin\n");
 		return -ENODEV;
 	}
-
-	r = gpio_direction_output(gpio, 1);
-	if (r) {
-		nfc_err(&client->dev,
-			"Failed to set reset pin direction as output\n");
-		return -ENODEV;
-	}
 	phy->gpio_reset = gpio;
 
 	/* IRQ */
 	r = irq_of_parse_and_map(pp, 0);
 	if (r < 0) {
-		nfc_err(&client->dev,
-				"Unable to get irq, error: %d\n", r);
+		nfc_err(&client->dev, "Unable to get irq, error: %d\n", r);
 		return r;
 	}
 
@@ -325,32 +299,20 @@ static int st21nfcb_nci_i2c_request_resources(struct i2c_client *client)
 	phy->gpio_reset = pdata->gpio_reset;
 	phy->irq_polarity = pdata->irq_polarity;
 
-	r = devm_gpio_request(&client->dev, phy->gpio_irq, "wake_up");
+	r = devm_gpio_request_one(&client->dev, phy->gpio_irq,
+				GPIOF_IN, "clf_irq");
 	if (r) {
 		pr_err("%s : gpio_request failed\n", __FILE__);
 		return -ENODEV;
 	}
 
-	r = gpio_direction_input(phy->gpio_irq);
-	if (r) {
-		pr_err("%s : gpio_direction_input failed\n", __FILE__);
-		return -ENODEV;
-	}
-
-	r = devm_gpio_request(&client->dev,
-			      phy->gpio_reset, "clf_reset");
+	r = devm_gpio_request_one(&client->dev,
+			phy->gpio_reset, GPIOF_OUT_INIT_HIGH, "clf_reset");
 	if (r) {
 		pr_err("%s : reset gpio_request failed\n", __FILE__);
 		return -ENODEV;
 	}
 
-	r = gpio_direction_output(phy->gpio_reset, 1);
-	if (r) {
-		pr_err("%s : reset gpio_direction_output failed\n",
-			__FILE__);
-		return -ENODEV;
-	}
-
 	/* IRQ */
 	irq = gpio_to_irq(phy->gpio_irq);
 	if (irq < 0) {
@@ -448,7 +410,6 @@ static struct i2c_driver st21nfcb_nci_i2c_driver = {
 	.driver = {
 		.owner = THIS_MODULE,
 		.name = ST21NFCB_NCI_I2C_DRIVER_NAME,
-		.owner = THIS_MODULE,
 		.of_match_table = of_match_ptr(of_st21nfcb_i2c_match),
 	},
 	.probe = st21nfcb_nci_i2c_probe,