NFC: st21nfca: Adding support for secure element

st21nfca has 1 physical SWP line and can support up to 2 secure elements
(UICC & eSE) thanks to an external switch managed with a gpio.

The platform integrator needs to specify thanks to 2 initialization
properties, uicc-present and ese-present, if it is suppose to have uicc
and/or ese. Of course if the platform does not have an external switch,
only one kind of secure element can be supported. Those parameters are
under platform integrator responsibilities.

During initialization, the white_list will be set according to those
parameters.

The discovery_se function will assume a secure element is physically
present according to uicc-present and ese-present values and will add it
to the secure element list. On ese activation, the atr is retrieved to
calculate a command exchange timeout based on the first atr(TB) value.

The se_io will allow to transfer data over SWP. 2 kind of events may appear
after a data is sent over:
- ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer
- ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than
expected to compute a command. If this timeout expired, a first recovery
tentative consist to send a simple software reset proprietary command.
If this tentative still fail, a second recovery tentative consist to send
a hardware reset proprietary command.
This function is only relevant for eSE like secure element.

This patch also change the way a pipe is referenced. There can be
different pipe connected to the same gate with different host destination
(ex: CONNECTIVITY). In order to keep host information every pipe are
reference with a tuple (gate, host). In order to reduce changes, we are
keeping unchanged the way a gate is addressed on the Terminal Host.
However, this is working because we consider the apdu reader gate is only
present on the eSE slot also the connectivity gate cannot give a reliable
value; it will give the latest stored pipe value.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 16 insertions, 5 deletions

diff --git a/drivers/nfc/st21nfca/st21nfca.h b/drivers/nfc/st21nfca/st21nfca.h
index 7c2a85292230..15a78d330a9f 100644
--- a/drivers/nfc/st21nfca/st21nfca.h
+++ b/drivers/nfc/st21nfca/st21nfca.h
@@ -20,6 +20,7 @@
 #include <net/nfc/hci.h>
 
 #include "st21nfca_dep.h"
+#include "st21nfca_se.h"
 
 #define HCI_MODE 0
 
@@ -51,9 +52,15 @@
 
 #define ST21NFCA_NUM_DEVICES 256
 
+struct st21nfca_se_status {
+	bool is_ese_present;
+	bool is_uicc_present;
+};
+
 int st21nfca_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops,
 		       char *llc_name, int phy_headroom, int phy_tailroom,
-		       int phy_payload, struct nfc_hci_dev **hdev);
+		       int phy_payload, struct nfc_hci_dev **hdev,
+			   struct st21nfca_se_status *se_status);
 void st21nfca_hci_remove(struct nfc_hci_dev *hdev);
 
 enum st21nfca_state {
@@ -66,6 +73,7 @@ struct st21nfca_hci_info {
 	void *phy_id;
 
 	struct nfc_hci_dev *hdev;
+	struct st21nfca_se_status *se_status;
 
 	enum st21nfca_state state;
 
@@ -76,13 +84,16 @@ struct st21nfca_hci_info {
 	void *async_cb_context;
 
 	struct st21nfca_dep_info dep_info;
+	struct st21nfca_se_info se_info;
 };
 
 /* Reader RF commands */
-#define ST21NFCA_WR_XCHG_DATA            0x10
-
-#define ST21NFCA_RF_READER_F_GATE               0x14
+#define ST21NFCA_WR_XCHG_DATA           0x10
 
-#define ST21NFCA_RF_CARD_F_GATE 0x24
+#define ST21NFCA_DEVICE_MGNT_GATE       0x01
+#define ST21NFCA_RF_READER_F_GATE       0x14
+#define ST21NFCA_RF_CARD_F_GATE			0x24
+#define ST21NFCA_APDU_READER_GATE		0xf0
+#define ST21NFCA_CONNECTIVITY_GATE		0x41
 
 #endif /* __LOCAL_ST21NFCA_H_ */