diff options
author | Alexander Duyck <alexander.h.duyck@intel.com> | 2009-07-23 22:10:24 +0400 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2009-07-26 20:47:02 +0400 |
commit | 0cce119aa977dba00467985c0ae93fe43d28740a (patch) | |
tree | 847330167dff04e7059b949a85c93d3ca9b4a054 /drivers/net | |
parent | 2d94d8ab76ea6c858c6e2eb0ab0403b00b031039 (diff) | |
download | linux-0cce119aa977dba00467985c0ae93fe43d28740a.tar.xz |
igb: cleanup flow control configuration to make requested/current more clear
This patch cleans up the flow control configuration for igb to make it a
bit more readable in regards to what the requested and current modes are.
This should help with the maintainability of the current igb driver in
regards to flow control.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/igb/e1000_hw.h | 6 | ||||
-rw-r--r-- | drivers/net/igb/e1000_mac.c | 50 | ||||
-rw-r--r-- | drivers/net/igb/e1000_phy.c | 4 | ||||
-rw-r--r-- | drivers/net/igb/igb_ethtool.c | 34 | ||||
-rw-r--r-- | drivers/net/igb/igb_main.c | 6 |
5 files changed, 55 insertions, 45 deletions
diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h index 0469e2e7e63c..119869b1124d 100644 --- a/drivers/net/igb/e1000_hw.h +++ b/drivers/net/igb/e1000_hw.h @@ -137,7 +137,7 @@ enum e1000_rev_polarity { e1000_rev_polarity_undefined = 0xFF }; -enum e1000_fc_type { +enum e1000_fc_mode { e1000_fc_none = 0, e1000_fc_rx_pause, e1000_fc_tx_pause, @@ -429,8 +429,8 @@ struct e1000_fc_info { u16 pause_time; /* Flow control pause timer */ bool send_xon; /* Flow control send XON */ bool strict_ieee; /* Strict IEEE mode */ - enum e1000_fc_type type; /* Type of flow control */ - enum e1000_fc_type original_type; + enum e1000_fc_mode current_mode; /* Type of flow control */ + enum e1000_fc_mode requested_mode; }; struct e1000_mbx_operations { diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c index a1e3da78dbb1..a0231cd079f1 100644 --- a/drivers/net/igb/e1000_mac.c +++ b/drivers/net/igb/e1000_mac.c @@ -536,18 +536,24 @@ s32 igb_setup_link(struct e1000_hw *hw) if (igb_check_reset_block(hw)) goto out; - ret_val = igb_set_default_fc(hw); - if (ret_val) - goto out; + /* + * If requested flow control is set to default, set flow control + * based on the EEPROM flow control settings. + */ + if (hw->fc.requested_mode == e1000_fc_default) { + ret_val = igb_set_default_fc(hw); + if (ret_val) + goto out; + } /* * We want to save off the original Flow Control configuration just * in case we get disconnected and then reconnected into a different * hub or switch with different Flow Control capabilities. */ - hw->fc.original_type = hw->fc.type; + hw->fc.current_mode = hw->fc.requested_mode; - hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.type); + hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode); /* Call the necessary media_type subroutine to configure the link. */ ret_val = hw->mac.ops.setup_physical_interface(hw); @@ -614,7 +620,7 @@ static s32 igb_set_fc_watermarks(struct e1000_hw *hw) * ability to transmit pause frames is not enabled, then these * registers will be set to 0. */ - if (hw->fc.type & e1000_fc_tx_pause) { + if (hw->fc.current_mode & e1000_fc_tx_pause) { /* * We need to set up the Receive Threshold high and low water * marks as well as (optionally) enabling the transmission of @@ -661,12 +667,12 @@ static s32 igb_set_default_fc(struct e1000_hw *hw) } if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0) - hw->fc.type = e1000_fc_none; + hw->fc.requested_mode = e1000_fc_none; else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == NVM_WORD0F_ASM_DIR) - hw->fc.type = e1000_fc_tx_pause; + hw->fc.requested_mode = e1000_fc_tx_pause; else - hw->fc.type = e1000_fc_full; + hw->fc.requested_mode = e1000_fc_full; out: return ret_val; @@ -696,7 +702,7 @@ s32 igb_force_mac_fc(struct e1000_hw *hw) * receive flow control. * * The "Case" statement below enables/disable flow control - * according to the "hw->fc.type" parameter. + * according to the "hw->fc.current_mode" parameter. * * The possible values of the "fc" parameter are: * 0: Flow control is completely disabled @@ -707,9 +713,9 @@ s32 igb_force_mac_fc(struct e1000_hw *hw) * 3: Both Rx and TX flow control (symmetric) is enabled. * other: No other values should be possible at this point. */ - hw_dbg("hw->fc.type = %u\n", hw->fc.type); + hw_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode); - switch (hw->fc.type) { + switch (hw->fc.current_mode) { case e1000_fc_none: ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); break; @@ -857,11 +863,11 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) * ONLY. Hence, we must now check to see if we need to * turn OFF the TRANSMISSION of PAUSE frames. */ - if (hw->fc.original_type == e1000_fc_full) { - hw->fc.type = e1000_fc_full; + if (hw->fc.requested_mode == e1000_fc_full) { + hw->fc.current_mode = e1000_fc_full; hw_dbg("Flow Control = FULL.\r\n"); } else { - hw->fc.type = e1000_fc_rx_pause; + hw->fc.current_mode = e1000_fc_rx_pause; hw_dbg("Flow Control = " "RX PAUSE frames only.\r\n"); } @@ -878,7 +884,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc.type = e1000_fc_tx_pause; + hw->fc.current_mode = e1000_fc_tx_pause; hw_dbg("Flow Control = TX PAUSE frames only.\r\n"); } /* @@ -893,7 +899,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc.type = e1000_fc_rx_pause; + hw->fc.current_mode = e1000_fc_rx_pause; hw_dbg("Flow Control = RX PAUSE frames only.\r\n"); } /* @@ -917,13 +923,13 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) * be asked to delay transmission of packets than asking * our link partner to pause transmission of frames. */ - else if ((hw->fc.original_type == e1000_fc_none || - hw->fc.original_type == e1000_fc_tx_pause) || + else if ((hw->fc.requested_mode == e1000_fc_none || + hw->fc.requested_mode == e1000_fc_tx_pause) || hw->fc.strict_ieee) { - hw->fc.type = e1000_fc_none; + hw->fc.current_mode = e1000_fc_none; hw_dbg("Flow Control = NONE.\r\n"); } else { - hw->fc.type = e1000_fc_rx_pause; + hw->fc.current_mode = e1000_fc_rx_pause; hw_dbg("Flow Control = RX PAUSE frames only.\r\n"); } @@ -939,7 +945,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) } if (duplex == HALF_DUPLEX) - hw->fc.type = e1000_fc_none; + hw->fc.current_mode = e1000_fc_none; /* * Now we call a subroutine to actually force the MAC diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c index f50fac25be40..c1f4da630420 100644 --- a/drivers/net/igb/e1000_phy.c +++ b/drivers/net/igb/e1000_phy.c @@ -735,7 +735,7 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw) * other: No software override. The flow control configuration * in the EEPROM is used. */ - switch (hw->fc.type) { + switch (hw->fc.current_mode) { case e1000_fc_none: /* * Flow control (RX & TX) is completely disabled by a @@ -992,7 +992,7 @@ static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw, u32 ctrl; /* Turn off flow control when forcing speed/duplex */ - hw->fc.type = e1000_fc_none; + hw->fc.current_mode = e1000_fc_none; /* Force speed/duplex on the mac */ ctrl = rd32(E1000_CTRL); diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index df2d234be229..114ccab1f2be 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -194,6 +194,8 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ADVERTISED_TP | ADVERTISED_Autoneg; ecmd->advertising = hw->phy.autoneg_advertised; + if (adapter->fc_autoneg) + hw->fc.requested_mode = e1000_fc_default; } else { if (igb_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) { clear_bit(__IGB_RESETTING, &adapter->state); @@ -221,11 +223,11 @@ static void igb_get_pauseparam(struct net_device *netdev, pause->autoneg = (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); - if (hw->fc.type == e1000_fc_rx_pause) + if (hw->fc.current_mode == e1000_fc_rx_pause) pause->rx_pause = 1; - else if (hw->fc.type == e1000_fc_tx_pause) + else if (hw->fc.current_mode == e1000_fc_tx_pause) pause->tx_pause = 1; - else if (hw->fc.type == e1000_fc_full) { + else if (hw->fc.current_mode == e1000_fc_full) { pause->rx_pause = 1; pause->tx_pause = 1; } @@ -243,26 +245,28 @@ static int igb_set_pauseparam(struct net_device *netdev, while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) msleep(1); - if (pause->rx_pause && pause->tx_pause) - hw->fc.type = e1000_fc_full; - else if (pause->rx_pause && !pause->tx_pause) - hw->fc.type = e1000_fc_rx_pause; - else if (!pause->rx_pause && pause->tx_pause) - hw->fc.type = e1000_fc_tx_pause; - else if (!pause->rx_pause && !pause->tx_pause) - hw->fc.type = e1000_fc_none; - - hw->fc.original_type = hw->fc.type; - if (adapter->fc_autoneg == AUTONEG_ENABLE) { + hw->fc.requested_mode = e1000_fc_default; if (netif_running(adapter->netdev)) { igb_down(adapter); igb_up(adapter); } else igb_reset(adapter); - } else + } else { + if (pause->rx_pause && pause->tx_pause) + hw->fc.requested_mode = e1000_fc_full; + else if (pause->rx_pause && !pause->tx_pause) + hw->fc.requested_mode = e1000_fc_rx_pause; + else if (!pause->rx_pause && pause->tx_pause) + hw->fc.requested_mode = e1000_fc_tx_pause; + else if (!pause->rx_pause && !pause->tx_pause) + hw->fc.requested_mode = e1000_fc_none; + + hw->fc.current_mode = hw->fc.requested_mode; + retval = ((hw->phy.media_type == e1000_media_type_copper) ? igb_force_mac_fc(hw) : igb_setup_link(hw)); + } clear_bit(__IGB_RESETTING, &adapter->state); return retval; diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 12d8683c231e..fb3273517587 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1130,7 +1130,7 @@ void igb_reset(struct igb_adapter *adapter) } fc->pause_time = 0xFFFF; fc->send_xon = 1; - fc->type = fc->original_type; + fc->current_mode = fc->requested_mode; /* disable receive for all VFs and wait one second */ if (adapter->vfs_allocated_count) { @@ -1427,8 +1427,8 @@ static int __devinit igb_probe(struct pci_dev *pdev, hw->mac.autoneg = true; hw->phy.autoneg_advertised = 0x2f; - hw->fc.original_type = e1000_fc_default; - hw->fc.type = e1000_fc_default; + hw->fc.requested_mode = e1000_fc_default; + hw->fc.current_mode = e1000_fc_default; adapter->itr_setting = IGB_DEFAULT_ITR; adapter->itr = IGB_START_ITR; |