ixgbe: Delete a bunch of dead code

All of the code involved with returning the supported physical
layer is actually unused, so delete it.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

4 files changed, 0 insertions, 275 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 206171f732fb..681e3205038d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -1109,106 +1109,6 @@ static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset,
 }
 
 /**
- *  ixgbe_get_supported_physical_layer_82598 - Returns physical layer type
- *  @hw: pointer to hardware structure
- *
- *  Determines physical layer capabilities of the current configuration.
- **/
-static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
-{
-	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
-	u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
-	u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
-	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
-	u16 ext_ability = 0;
-
-	hw->phy.ops.identify(hw);
-
-	/* Copper PHY must be checked before AUTOC LMS to determine correct
-	 * physical layer because 10GBase-T PHYs use LMS = KX4/KX */
-	switch (hw->phy.type) {
-	case ixgbe_phy_tn:
-	case ixgbe_phy_cu_unknown:
-		hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE,
-		MDIO_MMD_PMAPMD, &ext_ability);
-		if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
-			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
-		if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
-			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
-		if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
-			physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
-		goto out;
-	default:
-		break;
-	}
-
-	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
-	case IXGBE_AUTOC_LMS_1G_AN:
-	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
-		if (pma_pmd_1g == IXGBE_AUTOC_1G_KX)
-			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX;
-		else
-			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX;
-		break;
-	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
-		if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4)
-			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
-		else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4)
-			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
-		else /* XAUI */
-			physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
-		break;
-	case IXGBE_AUTOC_LMS_KX4_AN:
-	case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
-		if (autoc & IXGBE_AUTOC_KX_SUPP)
-			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
-		if (autoc & IXGBE_AUTOC_KX4_SUPP)
-			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
-		break;
-	default:
-		break;
-	}
-
-	if (hw->phy.type == ixgbe_phy_nl) {
-		hw->phy.ops.identify_sfp(hw);
-
-		switch (hw->phy.sfp_type) {
-		case ixgbe_sfp_type_da_cu:
-			physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
-			break;
-		case ixgbe_sfp_type_sr:
-			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
-			break;
-		case ixgbe_sfp_type_lr:
-			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
-			break;
-		default:
-			physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
-			break;
-		}
-	}
-
-	switch (hw->device_id) {
-	case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
-		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
-		break;
-	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
-	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
-	case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
-		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
-		break;
-	case IXGBE_DEV_ID_82598EB_XF_LR:
-		physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
-		break;
-	default:
-		break;
-	}
-
-out:
-	return physical_layer;
-}
-
-/**
  *  ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple
  *  port devices.
  *  @hw: pointer to the HW structure
@@ -1285,7 +1185,6 @@ static struct ixgbe_mac_operations mac_ops_82598 = {
 	.start_hw		= &ixgbe_start_hw_82598,
 	.clear_hw_cntrs		= &ixgbe_clear_hw_cntrs_generic,
 	.get_media_type		= &ixgbe_get_media_type_82598,
-	.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598,
 	.enable_rx_dma          = &ixgbe_enable_rx_dma_generic,
 	.get_mac_addr		= &ixgbe_get_mac_addr_generic,
 	.stop_adapter		= &ixgbe_stop_adapter_generic,
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index 0373a5b9219f..6fc633a2726a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -1980,132 +1980,6 @@ out:
 }
 
 /**
- *  ixgbe_get_supported_physical_layer_82599 - Returns physical layer type
- *  @hw: pointer to hardware structure
- *
- *  Determines physical layer capabilities of the current configuration.
- **/
-static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
-{
-	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
-	u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
-	u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
-	u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
-	u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
-	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
-	u16 ext_ability = 0;
-	u8 comp_codes_10g = 0;
-	u8 comp_codes_1g = 0;
-
-	hw->phy.ops.identify(hw);
-
-	switch (hw->phy.type) {
-	case ixgbe_phy_tn:
-	case ixgbe_phy_cu_unknown:
-		hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
-							 &ext_ability);
-		if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
-			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
-		if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
-			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
-		if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
-			physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
-		goto out;
-	default:
-		break;
-	}
-
-	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
-	case IXGBE_AUTOC_LMS_1G_AN:
-	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
-		if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) {
-			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX |
-			    IXGBE_PHYSICAL_LAYER_1000BASE_BX;
-			goto out;
-		} else
-			/* SFI mode so read SFP module */
-			goto sfp_check;
-		break;
-	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
-		if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4)
-			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
-		else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4)
-			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
-		else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI)
-			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI;
-		goto out;
-	case IXGBE_AUTOC_LMS_10G_SERIAL:
-		if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) {
-			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR;
-			goto out;
-		} else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)
-			goto sfp_check;
-		break;
-	case IXGBE_AUTOC_LMS_KX4_KX_KR:
-	case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
-		if (autoc & IXGBE_AUTOC_KX_SUPP)
-			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
-		if (autoc & IXGBE_AUTOC_KX4_SUPP)
-			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
-		if (autoc & IXGBE_AUTOC_KR_SUPP)
-			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR;
-		goto out;
-	default:
-		goto out;
-	}
-
-sfp_check:
-	/* SFP check must be done last since DA modules are sometimes used to
-	 * test KR mode -  we need to id KR mode correctly before SFP module.
-	 * Call identify_sfp because the pluggable module may have changed */
-	hw->phy.ops.identify_sfp(hw);
-	if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
-		goto out;
-
-	switch (hw->phy.type) {
-	case ixgbe_phy_sfp_passive_tyco:
-	case ixgbe_phy_sfp_passive_unknown:
-	case ixgbe_phy_qsfp_passive_unknown:
-		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
-		break;
-	case ixgbe_phy_sfp_ftl_active:
-	case ixgbe_phy_sfp_active_unknown:
-	case ixgbe_phy_qsfp_active_unknown:
-		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
-		break;
-	case ixgbe_phy_sfp_avago:
-	case ixgbe_phy_sfp_ftl:
-	case ixgbe_phy_sfp_intel:
-	case ixgbe_phy_sfp_unknown:
-		hw->phy.ops.read_i2c_eeprom(hw,
-		      IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g);
-		hw->phy.ops.read_i2c_eeprom(hw,
-		      IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
-		if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
-			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
-		else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
-			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
-		else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
-			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
-		break;
-	case ixgbe_phy_qsfp_intel:
-	case ixgbe_phy_qsfp_unknown:
-		hw->phy.ops.read_i2c_eeprom(hw,
-			IXGBE_SFF_QSFP_10GBE_COMP, &comp_codes_10g);
-		if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
-			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
-		else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
-			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
-		break;
-	default:
-		break;
-	}
-
-out:
-	return physical_layer;
-}
-
-/**
  *  ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599
  *  @hw: pointer to hardware structure
  *  @regval: register value to write to RXCTRL
@@ -2454,7 +2328,6 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 	.start_hw               = &ixgbe_start_hw_82599,
 	.clear_hw_cntrs         = &ixgbe_clear_hw_cntrs_generic,
 	.get_media_type         = &ixgbe_get_media_type_82599,
-	.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599,
 	.enable_rx_dma          = &ixgbe_enable_rx_dma_82599,
 	.disable_rx_buff	= &ixgbe_disable_rx_buff_generic,
 	.enable_rx_buff		= &ixgbe_enable_rx_buff_generic,
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 9a89f98b35f0..e6b07c2a01fe 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -2440,25 +2440,6 @@ typedef u32 ixgbe_link_speed;
 					IXGBE_LINK_SPEED_1GB_FULL | \
 					IXGBE_LINK_SPEED_10GB_FULL)
 
-
-/* Physical layer type */
-typedef u32 ixgbe_physical_layer;
-#define IXGBE_PHYSICAL_LAYER_UNKNOWN      0
-#define IXGBE_PHYSICAL_LAYER_10GBASE_T    0x0001
-#define IXGBE_PHYSICAL_LAYER_1000BASE_T   0x0002
-#define IXGBE_PHYSICAL_LAYER_100BASE_TX   0x0004
-#define IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU  0x0008
-#define IXGBE_PHYSICAL_LAYER_10GBASE_LR   0x0010
-#define IXGBE_PHYSICAL_LAYER_10GBASE_LRM  0x0020
-#define IXGBE_PHYSICAL_LAYER_10GBASE_SR   0x0040
-#define IXGBE_PHYSICAL_LAYER_10GBASE_KX4  0x0080
-#define IXGBE_PHYSICAL_LAYER_10GBASE_CX4  0x0100
-#define IXGBE_PHYSICAL_LAYER_1000BASE_KX  0x0200
-#define IXGBE_PHYSICAL_LAYER_1000BASE_BX  0x0400
-#define IXGBE_PHYSICAL_LAYER_10GBASE_KR   0x0800
-#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x1000
-#define IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA 0x2000
-
 /* Flow Control Data Sheet defined values
  * Calculation and defines taken from 802.1bb Annex O
  */
@@ -2860,7 +2841,6 @@ struct ixgbe_mac_operations {
 	s32 (*start_hw)(struct ixgbe_hw *);
 	s32 (*clear_hw_cntrs)(struct ixgbe_hw *);
 	enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *);
-	u32 (*get_supported_physical_layer)(struct ixgbe_hw *);
 	s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
 	s32 (*get_san_mac_addr)(struct ixgbe_hw *, u8 *);
 	s32 (*get_device_caps)(struct ixgbe_hw *, u16 *);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
index 1e26794febd6..7920ab9a18cb 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
@@ -194,31 +194,6 @@ out:
 }
 
 /**
- *  ixgbe_get_supported_physical_layer_X540 - Returns physical layer type
- *  @hw: pointer to hardware structure
- *
- *  Determines physical layer capabilities of the current configuration.
- **/
-static u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw)
-{
-	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
-	u16 ext_ability = 0;
-
-	hw->phy.ops.identify(hw);
-
-	hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
-			     &ext_ability);
-	if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
-		physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
-	if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
-		physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
-	if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
-		physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
-
-	return physical_layer;
-}
-
-/**
  *  ixgbe_init_eeprom_params_X540 - Initialize EEPROM params
  *  @hw: pointer to hardware structure
  *
@@ -792,8 +767,6 @@ static struct ixgbe_mac_operations mac_ops_X540 = {
 	.start_hw               = &ixgbe_start_hw_X540,
 	.clear_hw_cntrs         = &ixgbe_clear_hw_cntrs_generic,
 	.get_media_type         = &ixgbe_get_media_type_X540,
-	.get_supported_physical_layer =
-				  &ixgbe_get_supported_physical_layer_X540,
 	.enable_rx_dma          = &ixgbe_enable_rx_dma_generic,
 	.get_mac_addr           = &ixgbe_get_mac_addr_generic,
 	.get_san_mac_addr       = &ixgbe_get_san_mac_addr_generic,