Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits)
  MAINTAINERS: linux-m32r is moderated for non-subscribers
  linux@lists.openrisc.net is moderated for non-subscribers
  Drop default from "DM365 codec select" choice
  parisc: Kconfig: cleanup Kernel page size default
  Kconfig: remove redundant CONFIG_ prefix on two symbols
  cris: remove arch/cris/arch-v32/lib/nand_init.S
  microblaze: add missing CONFIG_ prefixes
  h8300: drop puzzling Kconfig dependencies
  MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers
  tty: drop superfluous dependency in Kconfig
  ARM: mxc: fix Kconfig typo 'i.MX51'
  Fix file references in Kconfig files
  aic7xxx: fix Kconfig references to READMEs
  Fix file references in drivers/ide/
  thinkpad_acpi: Fix printk typo 'bluestooth'
  bcmring: drop commented out line in Kconfig
  btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888'
  doc: raw1394: Trivial typo fix
  CIFS: Don't free volume_info->UNC until we are entirely done with it.
  treewide: Correct spelling of successfully in comments
  ...

25 files changed, 23 insertions, 50 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a44874e24f2a..ddd63e7cf4ae 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1063,8 +1063,7 @@ config SMSC911X
 	  Say Y here if you want support for SMSC LAN911x and LAN921x families
 	  of ethernet controllers.
 
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
+	  To compile this driver as a module, choose M here. The module
 	  will be called smsc911x.
 
 config SMSC911X_ARCH_HOOKS
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index c827a6097d02..8d0baeceaaa3 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -414,7 +414,7 @@ ks8695_tx_irq(int irq, void *dev_id)
  *    Interrupt Status Register (Offset 0xF208)
  *        Bit29: WAN MAC Receive Status
  *        Bit16: LAN MAC Receive Status
- *    So, this Rx interrrupt enable/status bit number is equal
+ *    So, this Rx interrupt enable/status bit number is equal
  *    as Rx IRQ number.
  */
 static inline u32 ks8695_get_rx_enable_bit(struct ks8695_priv *ksp)
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 97e6954304ea..9f3e5306ef79 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -858,7 +858,7 @@ static s32 atl1_init_hw(struct atl1_hw *hw)
 	atl1_init_flash_opcode(hw);
 
 	if (!hw->phy_configured) {
-		/* enable GPHY LinkChange Interrrupt */
+		/* enable GPHY LinkChange Interrupt */
 		ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
 		if (ret_val)
 			return ret_val;
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index fc50d4267df8..99d31a7d6aaa 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -5617,7 +5617,7 @@ struct l2_fhdr {
 #define BNX2_TXP_CPU_STATE_FIO_ABORT_HALTED		 (1L<<8)
 #define BNX2_TXP_CPU_STATE_SOFT_HALTED			 (1L<<10)
 #define BNX2_TXP_CPU_STATE_SPAD_UNDERFLOW		 (1L<<11)
-#define BNX2_TXP_CPU_STATE_INTERRRUPT			 (1L<<12)
+#define BNX2_TXP_CPU_STATE_INTERRUPT			 (1L<<12)
 #define BNX2_TXP_CPU_STATE_DATA_ACCESS_STALL		 (1L<<14)
 #define BNX2_TXP_CPU_STATE_INST_FETCH_STALL		 (1L<<15)
 #define BNX2_TXP_CPU_STATE_BLOCKED_READ			 (1L<<31)
@@ -5712,7 +5712,7 @@ struct l2_fhdr {
 #define BNX2_TPAT_CPU_STATE_FIO_ABORT_HALTED		 (1L<<8)
 #define BNX2_TPAT_CPU_STATE_SOFT_HALTED			 (1L<<10)
 #define BNX2_TPAT_CPU_STATE_SPAD_UNDERFLOW		 (1L<<11)
-#define BNX2_TPAT_CPU_STATE_INTERRRUPT			 (1L<<12)
+#define BNX2_TPAT_CPU_STATE_INTERRUPT			 (1L<<12)
 #define BNX2_TPAT_CPU_STATE_DATA_ACCESS_STALL		 (1L<<14)
 #define BNX2_TPAT_CPU_STATE_INST_FETCH_STALL		 (1L<<15)
 #define BNX2_TPAT_CPU_STATE_BLOCKED_READ		 (1L<<31)
@@ -5807,7 +5807,7 @@ struct l2_fhdr {
 #define BNX2_RXP_CPU_STATE_FIO_ABORT_HALTED		 (1L<<8)
 #define BNX2_RXP_CPU_STATE_SOFT_HALTED			 (1L<<10)
 #define BNX2_RXP_CPU_STATE_SPAD_UNDERFLOW		 (1L<<11)
-#define BNX2_RXP_CPU_STATE_INTERRRUPT			 (1L<<12)
+#define BNX2_RXP_CPU_STATE_INTERRUPT			 (1L<<12)
 #define BNX2_RXP_CPU_STATE_DATA_ACCESS_STALL		 (1L<<14)
 #define BNX2_RXP_CPU_STATE_INST_FETCH_STALL		 (1L<<15)
 #define BNX2_RXP_CPU_STATE_BLOCKED_READ			 (1L<<31)
@@ -5953,7 +5953,7 @@ struct l2_fhdr {
 #define BNX2_COM_CPU_STATE_FIO_ABORT_HALTED		 (1L<<8)
 #define BNX2_COM_CPU_STATE_SOFT_HALTED			 (1L<<10)
 #define BNX2_COM_CPU_STATE_SPAD_UNDERFLOW		 (1L<<11)
-#define BNX2_COM_CPU_STATE_INTERRRUPT			 (1L<<12)
+#define BNX2_COM_CPU_STATE_INTERRUPT			 (1L<<12)
 #define BNX2_COM_CPU_STATE_DATA_ACCESS_STALL		 (1L<<14)
 #define BNX2_COM_CPU_STATE_INST_FETCH_STALL		 (1L<<15)
 #define BNX2_COM_CPU_STATE_BLOCKED_READ			 (1L<<31)
@@ -6119,7 +6119,7 @@ struct l2_fhdr {
 #define BNX2_CP_CPU_STATE_FIO_ABORT_HALTED		 (1L<<8)
 #define BNX2_CP_CPU_STATE_SOFT_HALTED			 (1L<<10)
 #define BNX2_CP_CPU_STATE_SPAD_UNDERFLOW		 (1L<<11)
-#define BNX2_CP_CPU_STATE_INTERRRUPT			 (1L<<12)
+#define BNX2_CP_CPU_STATE_INTERRUPT			 (1L<<12)
 #define BNX2_CP_CPU_STATE_DATA_ACCESS_STALL		 (1L<<14)
 #define BNX2_CP_CPU_STATE_INST_FETCH_STALL		 (1L<<15)
 #define BNX2_CP_CPU_STATE_BLOCKED_READ			 (1L<<31)
@@ -6291,7 +6291,7 @@ struct l2_fhdr {
 #define BNX2_MCP_CPU_STATE_FIO_ABORT_HALTED		 (1L<<8)
 #define BNX2_MCP_CPU_STATE_SOFT_HALTED			 (1L<<10)
 #define BNX2_MCP_CPU_STATE_SPAD_UNDERFLOW		 (1L<<11)
-#define BNX2_MCP_CPU_STATE_INTERRRUPT			 (1L<<12)
+#define BNX2_MCP_CPU_STATE_INTERRUPT			 (1L<<12)
 #define BNX2_MCP_CPU_STATE_DATA_ACCESS_STALL		 (1L<<14)
 #define BNX2_MCP_CPU_STATE_INST_FETCH_STALL		 (1L<<15)
 #define BNX2_MCP_CPU_STATE_BLOCKED_READ			 (1L<<31)
diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c
index cee6ba2b8b58..c3dd9d09be57 100644
--- a/drivers/net/can/sja1000/sja1000_of_platform.c
+++ b/drivers/net/can/sja1000/sja1000_of_platform.c
@@ -29,7 +29,7 @@
  *           nxp,external-clock-frequency = <16000000>;
  *   };
  *
- * See "Documentation/powerpc/dts-bindings/can/sja1000.txt" for further
+ * See "Documentation/devicetree/bindings/net/can/sja1000.txt" for further
  * information.
  */
 
diff --git a/drivers/net/igb/e1000_mbx.c b/drivers/net/igb/e1000_mbx.c
index 74f2f11ac290..469d95eaa154 100644
--- a/drivers/net/igb/e1000_mbx.c
+++ b/drivers/net/igb/e1000_mbx.c
@@ -34,7 +34,7 @@
  *  @size: Length of buffer
  *  @mbx_id: id of mailbox to read
  *
- *  returns SUCCESS if it successfuly read message from buffer
+ *  returns SUCCESS if it successfully read message from buffer
  **/
 s32 igb_read_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
 {
diff --git a/drivers/net/igbvf/mbx.c b/drivers/net/igbvf/mbx.c
index 3d6f4cc3998a..048aae248d06 100644
--- a/drivers/net/igbvf/mbx.c
+++ b/drivers/net/igbvf/mbx.c
@@ -288,7 +288,7 @@ out_no_write:
  *  @msg: The message buffer
  *  @size: Length of buffer
  *
- *  returns SUCCESS if it successfuly read message from buffer
+ *  returns SUCCESS if it successfully read message from buffer
  **/
 static s32 e1000_read_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
 {
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 25bb2a015e18..a40fab44b9ae 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -183,7 +183,7 @@ config OLD_BELKIN_DONGLE
 	  Say Y here if you want to build support for the Adaptec Airport 1000
 	  and 2000 dongles.  If you want to compile it as a module, choose
 	  M here. Some information is contained in the comments
-	  at the top of <file:drivers/net/irda/old_belkin.c>.
+	  at the top of <file:drivers/net/irda/old_belkin-sir.c>.
 
 config ACT200L_DONGLE
 	tristate "ACTiSYS IR-200L dongle"
diff --git a/drivers/net/ixgbe/ixgbe_mbx.c b/drivers/net/ixgbe/ixgbe_mbx.c
index 1ff0eefcfd0a..3f725d48336d 100644
--- a/drivers/net/ixgbe/ixgbe_mbx.c
+++ b/drivers/net/ixgbe/ixgbe_mbx.c
@@ -38,7 +38,7 @@
  *  @size: Length of buffer
  *  @mbx_id: id of mailbox to read
  *
- *  returns SUCCESS if it successfuly read message from buffer
+ *  returns SUCCESS if it successfully read message from buffer
  **/
 s32 ixgbe_read_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
 {
diff --git a/drivers/net/ixgbevf/mbx.c b/drivers/net/ixgbevf/mbx.c
index 7a8833125770..930fa83f2568 100644
--- a/drivers/net/ixgbevf/mbx.c
+++ b/drivers/net/ixgbevf/mbx.c
@@ -276,7 +276,7 @@ out_no_write:
  *  @msg: The message buffer
  *  @size: Length of buffer
  *
- *  returns 0 if it successfuly read message from buffer
+ *  returns 0 if it successfully read message from buffer
  **/
 static s32 ixgbevf_read_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size)
 {
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index d84c4224dd12..e8be47d6d7d0 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -553,7 +553,7 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
 		/*
 		 * There is no BCM5481 specification available, so down
 		 * here is everything we know about "register 0x18". This
-		 * at least helps BCM5481 to successfuly receive packets
+		 * at least helps BCM5481 to successfully receive packets
 		 * on MPC8360E-RDK board. Peter Barada <peterb@logicpd.com>
 		 * says: "This sets delay between the RXD and RXC signals
 		 * instead of using trace lengths to achieve timing".
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 57339da76326..d7f879dfb1c9 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -2057,7 +2057,7 @@ static void sky2_hw_down(struct sky2_port *sky2)
 
 	sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
 
-	/* Force any delayed status interrrupt and NAPI */
+	/* Force any delayed status interrupt and NAPI */
 	sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
 	sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
 	sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
diff --git a/drivers/net/tile/tilepro.c b/drivers/net/tile/tilepro.c
index 1e2af96fc29c..7b46e75deb5a 100644
--- a/drivers/net/tile/tilepro.c
+++ b/drivers/net/tile/tilepro.c
@@ -177,7 +177,7 @@ struct tile_net_cpu {
 	struct tile_net_stats_t stats;
 	/* True iff NAPI is enabled. */
 	bool napi_enabled;
-	/* True if this tile has succcessfully registered with the IPP. */
+	/* True if this tile has successfully registered with the IPP. */
 	bool registered;
 	/* True if the link was down last time we tried to register. */
 	bool link_down;
diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c
index 092c3faa882a..25b8deedbef8 100644
--- a/drivers/net/tulip/21142.c
+++ b/drivers/net/tulip/21142.c
@@ -7,9 +7,6 @@
 	This software may be used and distributed according to the terms
 	of the GNU General Public License, incorporated herein by reference.
 
-	Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
-	for more information on this driver.
-
 	DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller
 	Hardware Reference Manual" is currently available at :
 	http://developer.intel.com/design/network/manuals/278074.htm
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index fa5eee925f25..14d5b611783d 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -7,8 +7,6 @@
 	This software may be used and distributed according to the terms
 	of the GNU General Public License, incorporated herein by reference.
 
-	Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
-	for more information on this driver.
 	Please submit bug reports to http://bugzilla.kernel.org/.
 */
 
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c
index 5350d753e0ff..4fb8c8c0a420 100644
--- a/drivers/net/tulip/interrupt.c
+++ b/drivers/net/tulip/interrupt.c
@@ -7,10 +7,7 @@
 	This software may be used and distributed according to the terms
 	of the GNU General Public License, incorporated herein by reference.
 
-	Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
-	for more information on this driver.
         Please submit bugs to http://bugzilla.kernel.org/ .
-
 */
 
 #include <linux/pci.h>
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index 4bd13922875d..beeb17b52ad4 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -7,9 +7,6 @@
 	This software may be used and distributed according to the terms
 	of the GNU General Public License, incorporated herein by reference.
 
-	Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
-	for more information on this driver.
-
 	Please submit bugs to http://bugzilla.kernel.org/ .
 */
 
diff --git a/drivers/net/tulip/pnic.c b/drivers/net/tulip/pnic.c
index 52d898bdbeb4..9c16e4ad02a6 100644
--- a/drivers/net/tulip/pnic.c
+++ b/drivers/net/tulip/pnic.c
@@ -7,9 +7,6 @@
 	This software may be used and distributed according to the terms
 	of the GNU General Public License, incorporated herein by reference.
 
-	Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
-	for more information on this driver.
-
 	Please submit bugs to http://bugzilla.kernel.org/ .
 */
 
diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c
index 93358ee4d830..04a7e477eaff 100644
--- a/drivers/net/tulip/pnic2.c
+++ b/drivers/net/tulip/pnic2.c
@@ -8,9 +8,6 @@
 	This software may be used and distributed according to the terms
 	of the GNU General Public License, incorporated herein by reference.
 
-	Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
-	for more information on this driver.
-
         Please submit bugs to http://bugzilla.kernel.org/ .
 */
 
diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c
index 2017faf2d0e6..19078d28ffb9 100644
--- a/drivers/net/tulip/timer.c
+++ b/drivers/net/tulip/timer.c
@@ -7,9 +7,6 @@
 	This software may be used and distributed according to the terms
 	of the GNU General Public License, incorporated herein by reference.
 
-	Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
-	for more information on this driver.
-
 	Please submit bugs to http://bugzilla.kernel.org/ .
 */
 
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h
index 9db528967da9..fb3887c18dc6 100644
--- a/drivers/net/tulip/tulip.h
+++ b/drivers/net/tulip/tulip.h
@@ -7,9 +7,6 @@
 	This software may be used and distributed according to the terms
 	of the GNU General Public License, incorporated herein by reference.
 
-	Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
-	for more information on this driver.
-
 	Please submit bugs to http://bugzilla.kernel.org/ .
 */
 
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 1246998a677c..b905c0dc5648 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -6,9 +6,6 @@
 	This software may be used and distributed according to the terms
 	of the GNU General Public License, incorporated herein by reference.
 
-	Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
-	for more information on this driver.
-
 	Please submit bugs to http://bugzilla.kernel.org/ .
 */
 
diff --git a/drivers/net/wireless/ipw2x00/libipw_tx.c b/drivers/net/wireless/ipw2x00/libipw_tx.c
index 01c88a71abe1..e8c039879b05 100644
--- a/drivers/net/wireless/ipw2x00/libipw_tx.c
+++ b/drivers/net/wireless/ipw2x00/libipw_tx.c
@@ -395,7 +395,7 @@ netdev_tx_t libipw_xmit(struct sk_buff *skb, struct net_device *dev)
 		    (CFG_LIBIPW_COMPUTE_FCS | CFG_LIBIPW_RESERVE_FCS))
 			bytes_per_frag -= LIBIPW_FCS_LEN;
 
-		/* Each fragment may need to have room for encryptiong
+		/* Each fragment may need to have room for encryption
 		 * pre/postfix */
 		if (host_encrypt)
 			bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len +
diff --git a/drivers/net/wireless/libertas_tf/deb_defs.h b/drivers/net/wireless/libertas_tf/deb_defs.h
index ae753962d8b5..4bd3dc5adf7c 100644
--- a/drivers/net/wireless/libertas_tf/deb_defs.h
+++ b/drivers/net/wireless/libertas_tf/deb_defs.h
@@ -3,7 +3,7 @@
   * global variable declaration.
   */
 #ifndef _LBS_DEB_DEFS_H_
-#define _LBS_DEB_EFS_H_
+#define _LBS_DEB_DEFS_H_
 
 #ifndef DRV_NAME
 #define DRV_NAME "libertas_tf"
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 56f12358389d..f8648b7288d5 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -488,7 +488,7 @@ static void _rtl_pci_tx_chk_waitq(struct ieee80211_hw *hw)
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 	struct sk_buff *skb = NULL;
 	struct ieee80211_tx_info *info = NULL;
-	int tid; /* should be int */
+	int tid;
 
 	if (!rtlpriv->rtlhal.earlymode_enable)
 		return;
@@ -1538,7 +1538,7 @@ static int rtl_pci_start(struct ieee80211_hw *hw)
 
 	rtl_init_rx_config(hw);
 
-	/*should after adapter start and interrupt enable. */
+	/*should be after adapter start and interrupt enable. */
 	set_hal_start(rtlhal);
 
 	RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
@@ -1559,7 +1559,7 @@ static void rtl_pci_stop(struct ieee80211_hw *hw)
 	u8 RFInProgressTimeOut = 0;
 
 	/*
-	 *should before disable interrrupt&adapter
+	 *should be before disable interrupt&adapter
 	 *and will do it immediately.
 	 */
 	set_hal_stop(rtlhal);