wl12xx: update BT coex configuration params

The BT coex params api have been changed.
Update it, and init coex for both sta and ap.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

1 files changed, 107 insertions, 211 deletions

diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 30ee7d304bcc..a7c147838ab8 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -99,40 +99,75 @@ enum {
 
 enum {
 	/*
-	 * PER threshold in PPM of the BT voice
+	 * Configure the min and max time BT gains the antenna
+	 * in WLAN / BT master basic rate
 	 *
-	 * Range: 0 - 10000000
+	 * Range: 0 - 255 (ms)
 	 */
-	CONF_SG_BT_PER_THRESHOLD = 0,
+	CONF_SG_ACL_BT_MASTER_MIN_BR = 0,
+	CONF_SG_ACL_BT_MASTER_MAX_BR,
 
 	/*
-	 * Number of consequent RX_ACTIVE activities to override BT voice
-	 * frames to ensure WLAN connection
+	 * Configure the min and max time BT gains the antenna
+	 * in WLAN / BT slave basic rate
 	 *
-	 * Range: 0 - 100
+	 * Range: 0 - 255 (ms)
 	 */
-	CONF_SG_HV3_MAX_OVERRIDE,
+	CONF_SG_ACL_BT_SLAVE_MIN_BR,
+	CONF_SG_ACL_BT_SLAVE_MAX_BR,
 
 	/*
-	 * Defines the PER threshold of the BT voice
+	 * Configure the min and max time BT gains the antenna
+	 * in WLAN / BT master EDR
 	 *
-	 * Range: 0 - 65000
+	 * Range: 0 - 255 (ms)
 	 */
-	CONF_SG_BT_NFS_SAMPLE_INTERVAL,
+	CONF_SG_ACL_BT_MASTER_MIN_EDR,
+	CONF_SG_ACL_BT_MASTER_MAX_EDR,
 
 	/*
-	 * Defines the load ratio of BT
+	 * Configure the min and max time BT gains the antenna
+	 * in WLAN / BT slave EDR
 	 *
-	 * Range: 0 - 100 (%)
+	 * Range: 0 - 255 (ms)
 	 */
-	CONF_SG_BT_LOAD_RATIO,
+	CONF_SG_ACL_BT_SLAVE_MIN_EDR,
+	CONF_SG_ACL_BT_SLAVE_MAX_EDR,
 
 	/*
-	 * Defines whether the SG will force WLAN host to enter/exit PSM
+	 * The maximum time WLAN can gain the antenna
+	 * in WLAN PSM / BT master/slave BR
 	 *
-	 * Range: 1 - SG can force, 0 - host handles PSM
+	 * Range: 0 - 255 (ms)
 	 */
-	CONF_SG_AUTO_PS_MODE,
+	CONF_SG_ACL_WLAN_PS_MASTER_BR,
+	CONF_SG_ACL_WLAN_PS_SLAVE_BR,
+
+	/*
+	 * The maximum time WLAN can gain the antenna
+	 * in WLAN PSM / BT master/slave EDR
+	 *
+	 * Range: 0 - 255 (ms)
+	 */
+	CONF_SG_ACL_WLAN_PS_MASTER_EDR,
+	CONF_SG_ACL_WLAN_PS_SLAVE_EDR,
+
+	/* TODO: explain these values */
+	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR,
+	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR,
+	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR,
+	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR,
+	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR,
+	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR,
+	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR,
+	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR,
+
+	CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR,
+	CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR,
+	CONF_SG_ACL_PASSIVE_SCAN_BT_BR,
+	CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR,
+	CONF_SG_ACL_PASSIVE_SCAN_BT_EDR,
+	CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR,
 
 	/*
 	 * Compensation percentage of probe requests when scan initiated
@@ -151,102 +186,70 @@ enum {
 	CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
 
 	/*
-	 * Defines antenna configuration (single/dual antenna)
-	 *
-	 * Range: 0 - single antenna, 1 - dual antenna
-	 */
-	CONF_SG_ANTENNA_CONFIGURATION,
-
-	/*
-	 * The threshold (percent) of max consequtive beacon misses before
-	 * increasing priority of beacon reception.
-	 *
-	 * Range: 0 - 100 (%)
-	 */
-	CONF_SG_BEACON_MISS_PERCENT,
-
-	/*
-	 * The rate threshold below which receiving a data frame from the AP
-	 * will increase the priority of the data frame above BT traffic.
-	 *
-	 * Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54
-	 */
-	CONF_SG_RATE_ADAPT_THRESH,
-
-	/*
-	 * Not used currently.
+	 * Compensation percentage of WLAN active scan window if initiated
+	 * during BT A2DP
 	 *
-	 * Range: 0
+	 * Range: 0 - 1000 (%)
 	 */
-	CONF_SG_RATE_ADAPT_SNR,
+	CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
 
 	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN PSM / BT master basic rate
+	 * Compensation percentage of WLAN passive scan window if initiated
+	 * during BT A2DP BR
 	 *
-	 * Range: 0 - 255 (ms)
+	 * Range: 0 - 1000 (%)
 	 */
-	CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR,
-	CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR,
+	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR,
 
 	/*
-	 * The time after it expires no new WLAN trigger frame is trasmitted
-	 * in WLAN PSM / BT master basic rate
+	 * Compensation percentage of WLAN passive scan window if initiated
+	 * during BT A2DP EDR
 	 *
-	 * Range: 0 - 255 (ms)
+	 * Range: 0 - 1000 (%)
 	 */
-	CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR,
+	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR,
 
 	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN PSM / BT slave basic rate
+	 * Compensation percentage of WLAN passive scan window if initiated
+	 * during BT voice
 	 *
-	 * Range: 0 - 255 (ms)
+	 * Range: 0 - 1000 (%)
 	 */
-	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR,
-	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR,
+	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
 
-	/*
-	 * The time after it expires no new WLAN trigger frame is trasmitted
-	 * in WLAN PSM / BT slave basic rate
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR,
+	/* TODO: explain these values */
+	CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
+	CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN,
+	CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN,
 
 	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN PSM / BT master EDR
+	 * Defines whether the SG will force WLAN host to enter/exit PSM
 	 *
-	 * Range: 0 - 255 (ms)
+	 * Range: 1 - SG can force, 0 - host handles PSM
 	 */
-	CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR,
-	CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR,
+	CONF_SG_STA_FORCE_PS_IN_BT_SCO,
 
 	/*
-	 * The time after it expires no new WLAN trigger frame is trasmitted
-	 * in WLAN PSM / BT master EDR
+	 * Defines antenna configuration (single/dual antenna)
 	 *
-	 * Range: 0 - 255 (ms)
+	 * Range: 0 - single antenna, 1 - dual antenna
 	 */
-	CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR,
+	CONF_SG_ANTENNA_CONFIGURATION,
 
 	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN PSM / BT slave EDR
+	 * The threshold (percent) of max consecutive beacon misses before
+	 * increasing priority of beacon reception.
 	 *
-	 * Range: 0 - 255 (ms)
+	 * Range: 0 - 100 (%)
 	 */
-	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR,
-	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR,
+	CONF_SG_BEACON_MISS_PERCENT,
 
 	/*
-	 * The time after it expires no new WLAN trigger frame is trasmitted
-	 * in WLAN PSM / BT slave EDR
+	 * Protection time of the DHCP procedure.
 	 *
-	 * Range: 0 - 255 (ms)
+	 * Range: 0 - 100000 (ms)
 	 */
-	CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR,
+	CONF_SG_DHCP_TIME,
 
 	/*
 	 * RX guard time before the beginning of a new BT voice frame during
@@ -273,166 +276,59 @@ enum {
 	 */
 	CONF_SG_ADAPTIVE_RXT_TXT,
 
-	/*
-	 * The used WLAN legacy service period during active BT ACL link
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_PS_POLL_TIMEOUT,
-
-	/*
-	 * The used WLAN UPSD service period during active BT ACL link
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_UPSD_TIMEOUT,
-
-	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN Active / BT master EDR
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR,
-	CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR,
-
-	/*
-	 * The maximum time WLAN can gain the antenna for
-	 * in WLAN Active / BT master EDR
-	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR,
+	/* TODO: explain this value */
+	CONF_SG_GENERAL_USAGE_BIT_MAP,
 
 	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN Active / BT slave EDR
+	 * Number of consecutive BT voice frames not interrupted by WLAN
 	 *
-	 * Range: 0 - 255 (ms)
-	 */
-	CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR,
-	CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR,
-
-	/*
-	 * The maximum time WLAN can gain the antenna for
-	 * in WLAN Active / BT slave EDR
-	 *
-	 * Range: 0 - 255 (ms)
+	 * Range: 0 - 100
 	 */
-	CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR,
+	CONF_SG_HV3_MAX_SERVED,
 
 	/*
-	 * Configure the min and max time BT gains the antenna
-	 * in WLAN Active / BT basic rate
+	 * The used WLAN legacy service period during active BT ACL link
 	 *
 	 * Range: 0 - 255 (ms)
 	 */
-	CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR,
-	CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR,
+	CONF_SG_PS_POLL_TIMEOUT,
 
 	/*
-	 * The maximum time WLAN can gain the antenna for
-	 * in WLAN Active / BT basic rate
+	 * The used WLAN UPSD service period during active BT ACL link
 	 *
 	 * Range: 0 - 255 (ms)
 	 */
-	CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR,
-
-	/*
-	 * Compensation percentage of WLAN passive scan window if initiated
-	 * during BT voice
-	 *
-	 * Range: 0 - 1000 (%)
-	 */
-	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
-
-	/*
-	 * Compensation percentage of WLAN passive scan window if initiated
-	 * during BT A2DP
-	 *
-	 * Range: 0 - 1000 (%)
-	 */
-	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP,
+	CONF_SG_UPSD_TIMEOUT,
 
-	/*
-	 * Fixed time ensured for BT traffic to gain the antenna during WLAN
-	 * passive scan.
-	 *
-	 * Range: 0 - 1000 ms
-	 */
-	CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME,
+	CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
+	CONF_SG_STA_RX_WINDOW_AFTER_DTIM,
+	CONF_SG_STA_CONNECTION_PROTECTION_TIME,
 
-	/*
-	 * Fixed time ensured for WLAN traffic to gain the antenna during WLAN
-	 * passive scan.
-	 *
-	 * Range: 0 - 1000 ms
-	 */
-	CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME,
+	/* AP params */
+	CONF_AP_BEACON_MISS_TX,
+	CONF_AP_RX_WINDOW_AFTER_BEACON,
+	CONF_AP_BEACON_WINDOW_INTERVAL,
+	CONF_AP_CONNECTION_PROTECTION_TIME,
+	CONF_AP_BT_ACL_VAL_BT_SERVE_TIME,
+	CONF_AP_BT_ACL_VAL_WL_SERVE_TIME,
 
-	/*
-	 * Number of consequent BT voice frames not interrupted by WLAN
-	 *
-	 * Range: 0 - 100
-	 */
-	CONF_SG_HV3_MAX_SERVED,
-
-	/*
-	 * Protection time of the DHCP procedure.
-	 *
-	 * Range: 0 - 100000 (ms)
-	 */
-	CONF_SG_DHCP_TIME,
-
-	/*
-	 * Compensation percentage of WLAN active scan window if initiated
-	 * during BT A2DP
-	 *
-	 * Range: 0 - 1000 (%)
-	 */
-	CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
 	CONF_SG_TEMP_PARAM_1,
 	CONF_SG_TEMP_PARAM_2,
 	CONF_SG_TEMP_PARAM_3,
 	CONF_SG_TEMP_PARAM_4,
 	CONF_SG_TEMP_PARAM_5,
-
-	/*
-	 * AP beacon miss
-	 *
-	 * Range: 0 - 255
-	 */
-	CONF_SG_AP_BEACON_MISS_TX,
-
-	/*
-	 * AP RX window length
-	 *
-	 * Range: 0 - 50
-	 */
-	CONF_SG_RX_WINDOW_LENGTH,
-
-	/*
-	 * AP connection protection time
-	 *
-	 * Range: 0 - 5000
-	 */
-	CONF_SG_AP_CONNECTION_PROTECTION_TIME,
-
 	CONF_SG_TEMP_PARAM_6,
 	CONF_SG_TEMP_PARAM_7,
 	CONF_SG_TEMP_PARAM_8,
 	CONF_SG_TEMP_PARAM_9,
 	CONF_SG_TEMP_PARAM_10,
 
-	CONF_SG_STA_PARAMS_MAX = CONF_SG_TEMP_PARAM_5 + 1,
-	CONF_SG_AP_PARAMS_MAX = CONF_SG_TEMP_PARAM_10 + 1,
-
+	CONF_SG_PARAMS_MAX,
 	CONF_SG_PARAMS_ALL = 0xff
 };
 
 struct conf_sg_settings {
-	u32 sta_params[CONF_SG_STA_PARAMS_MAX];
-	u32 ap_params[CONF_SG_AP_PARAMS_MAX];
+	u32 params[CONF_SG_PARAMS_MAX];
 	u8 state;
 };
 
@@ -913,7 +809,7 @@ struct conf_conn_settings {
 	struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT];
 
 	/*
-	 * The number of consequtive beacons to lose, before the firmware
+	 * The number of consecutive beacons to lose, before the firmware
 	 * becomes out of synch.
 	 *
 	 * Range: u32
@@ -951,7 +847,7 @@ struct conf_conn_settings {
 	u8 rx_broadcast_in_ps;
 
 	/*
-	 * Consequtive PS Poll failures before sending event to driver
+	 * Consecutive PS Poll failures before sending event to driver
 	 *
 	 * Range: u8
 	 */