Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) BBR TCP congestion control, from Neal Cardwell, Yuchung Cheng and
    co. at Google. https://lwn.net/Articles/701165/

 2) Do TCP Small Queues for retransmits, from Eric Dumazet.

 3) Support collect_md mode for all IPV4 and IPV6 tunnels, from Alexei
    Starovoitov.

 4) Allow cls_flower to classify packets in ip tunnels, from Amir Vadai.

 5) Support DSA tagging in older mv88e6xxx switches, from Andrew Lunn.

 6) Support GMAC protocol in iwlwifi mwm, from Ayala Beker.

 7) Support ndo_poll_controller in mlx5, from Calvin Owens.

 8) Move VRF processing to an output hook and allow l3mdev to be
    loopback, from David Ahern.

 9) Support SOCK_DESTROY for UDP sockets. Also from David Ahern.

10) Congestion control in RXRPC, from David Howells.

11) Support geneve RX offload in ixgbe, from Emil Tantilov.

12) When hitting pressure for new incoming TCP data SKBs, perform a
    partial rathern than a full purge of the OFO queue (which could be
    huge). From Eric Dumazet.

13) Convert XFRM state and policy lookups to RCU, from Florian Westphal.

14) Support RX network flow classification to igb, from Gangfeng Huang.

15) Hardware offloading of eBPF in nfp driver, from Jakub Kicinski.

16) New skbmod packet action, from Jamal Hadi Salim.

17) Remove some inefficiencies in snmp proc output, from Jia He.

18) Add FIB notifications to properly propagate route changes to
    hardware which is doing forwarding offloading. From Jiri Pirko.

19) New dsa driver for qca8xxx chips, from John Crispin.

20) Implement RFC7559 ipv6 router solicitation backoff, from Maciej
    Żenczykowski.

21) Add L3 mode to ipvlan, from Mahesh Bandewar.

22) Support 802.1ad in mlx4, from Moshe Shemesh.

23) Support hardware LRO in mediatek driver, from Nelson Chang.

24) Add TC offloading to mlx5, from Or Gerlitz.

25) Convert various drivers to ethtool ksettings interfaces, from
    Philippe Reynes.

26) TX max rate limiting for cxgb4, from Rahul Lakkireddy.

27) NAPI support for ath10k, from Rajkumar Manoharan.

28) Support XDP in mlx5, from Rana Shahout and Saeed Mahameed.

29) UDP replicast support in TIPC, from Richard Alpe.

30) Per-queue statistics for qed driver, from Sudarsana Reddy Kalluru.

31) Support BQL in thunderx driver, from Sunil Goutham.

32) TSO support in alx driver, from Tobias Regnery.

33) Add stream parser engine and use it in kcm.

34) Support async DHCP replies in ipconfig module, from Uwe
    Kleine-König.

35) DSA port fast aging for mv88e6xxx driver, from Vivien Didelot.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1715 commits)
  mlxsw: switchx2: Fix misuse of hard_header_len
  mlxsw: spectrum: Fix misuse of hard_header_len
  net/faraday: Stop NCSI device on shutdown
  net/ncsi: Introduce ncsi_stop_dev()
  net/ncsi: Rework the channel monitoring
  net/ncsi: Allow to extend NCSI request properties
  net/ncsi: Rework request index allocation
  net/ncsi: Don't probe on the reserved channel ID (0x1f)
  net/ncsi: Introduce NCSI_RESERVED_CHANNEL
  net/ncsi: Avoid unused-value build warning from ia64-linux-gcc
  net: Add netdev all_adj_list refcnt propagation to fix panic
  net: phy: Add Edge-rate driver for Microsemi PHYs.
  vmxnet3: Wake queue from reset work
  i40e: avoid NULL pointer dereference and recursive errors on early PCI error
  qed: Add RoCE ll2 & GSI support
  qed: Add support for memory registeration verbs
  qed: Add support for QP verbs
  qed: PD,PKEY and CQ verb support
  qed: Add support for RoCE hw init
  qede: Add qedr framework
  ...

10 files changed, 169 insertions, 85 deletions

diff --git a/drivers/net/wireless/ti/wl18xx/acx.c b/drivers/net/wireless/ti/wl18xx/acx.c
index 4be0409308cb..b5525a38264b 100644
--- a/drivers/net/wireless/ti/wl18xx/acx.c
+++ b/drivers/net/wireless/ti/wl18xx/acx.c
@@ -309,3 +309,32 @@ out:
 	kfree(acx);
 	return ret;
 }
+
+int wl18xx_acx_time_sync_cfg(struct wl1271 *wl)
+{
+	struct acx_time_sync_cfg *acx;
+	int ret;
+
+	wl1271_debug(DEBUG_ACX, "acx time sync cfg: mode %d, addr: %pM",
+		     wl->conf.sg.params[WL18XX_CONF_SG_TIME_SYNC],
+		     wl->zone_master_mac_addr);
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->sync_mode = wl->conf.sg.params[WL18XX_CONF_SG_TIME_SYNC];
+	memcpy(acx->zone_mac_addr, wl->zone_master_mac_addr, ETH_ALEN);
+
+	ret = wl1271_cmd_configure(wl, ACX_TIME_SYNC_CFG,
+				   acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("acx time sync cfg failed: %d", ret);
+		goto out;
+	}
+out:
+	kfree(acx);
+	return ret;
+}
diff --git a/drivers/net/wireless/ti/wl18xx/acx.h b/drivers/net/wireless/ti/wl18xx/acx.h
index 342a2993ef98..2edbbbfd8421 100644
--- a/drivers/net/wireless/ti/wl18xx/acx.h
+++ b/drivers/net/wireless/ti/wl18xx/acx.h
@@ -37,6 +37,7 @@ enum {
 	ACX_RX_BA_FILTER		 = 0x0058,
 	ACX_AP_SLEEP_CFG                 = 0x0059,
 	ACX_DYNAMIC_TRACES_CFG		 = 0x005A,
+	ACX_TIME_SYNC_CFG		 = 0x005B,
 };
 
 /* numbers of bits the length field takes (add 1 for the actual number) */
@@ -388,6 +389,17 @@ struct acx_dynamic_fw_traces_cfg {
 	__le32 dynamic_fw_traces;
 } __packed;
 
+/*
+ * ACX_TIME_SYNC_CFG
+ * configure the time sync parameters
+ */
+struct acx_time_sync_cfg {
+	struct acx_header header;
+	u8 sync_mode;
+	u8 zone_mac_addr[ETH_ALEN];
+	u8 padding[1];
+} __packed;
+
 int wl18xx_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap,
 				  u32 sdio_blk_size, u32 extra_mem_blks,
 				  u32 len_field_size);
@@ -402,5 +414,6 @@ int wl18xx_acx_interrupt_notify_config(struct wl1271 *wl, bool action);
 int wl18xx_acx_rx_ba_filter(struct wl1271 *wl, bool action);
 int wl18xx_acx_ap_sleep(struct wl1271 *wl);
 int wl18xx_acx_dynamic_fw_traces(struct wl1271 *wl);
+int wl18xx_acx_time_sync_cfg(struct wl1271 *wl);
 
 #endif /* __WL18XX_ACX_H__ */
diff --git a/drivers/net/wireless/ti/wl18xx/event.c b/drivers/net/wireless/ti/wl18xx/event.c
index 2c5df43b8ed9..b36ce185c9f2 100644
--- a/drivers/net/wireless/ti/wl18xx/event.c
+++ b/drivers/net/wireless/ti/wl18xx/event.c
@@ -22,6 +22,7 @@
 #include <net/genetlink.h>
 #include "event.h"
 #include "scan.h"
+#include "conf.h"
 #include "../wlcore/cmd.h"
 #include "../wlcore/debug.h"
 #include "../wlcore/vendor_cmd.h"
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 00a04dfc03d1..06d6943b257c 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -1397,25 +1397,24 @@ out:
 	return ret;
 }
 
-#define WL18XX_CONF_FILE_NAME "ti-connectivity/wl18xx-conf.bin"
-
 static int wl18xx_load_conf_file(struct device *dev, struct wlcore_conf *conf,
-				 struct wl18xx_priv_conf *priv_conf)
+				 struct wl18xx_priv_conf *priv_conf,
+				 const char *file)
 {
 	struct wlcore_conf_file *conf_file;
 	const struct firmware *fw;
 	int ret;
 
-	ret = request_firmware(&fw, WL18XX_CONF_FILE_NAME, dev);
+	ret = request_firmware(&fw, file, dev);
 	if (ret < 0) {
 		wl1271_error("could not get configuration binary %s: %d",
-			     WL18XX_CONF_FILE_NAME, ret);
+			     file, ret);
 		return ret;
 	}
 
 	if (fw->size != WL18XX_CONF_SIZE) {
-		wl1271_error("configuration binary file size is wrong, expected %zu got %zu",
-			     WL18XX_CONF_SIZE, fw->size);
+		wl1271_error("%s configuration binary size is wrong, expected %zu got %zu",
+			     file, WL18XX_CONF_SIZE, fw->size);
 		ret = -EINVAL;
 		goto out_release;
 	}
@@ -1448,9 +1447,12 @@ out_release:
 
 static int wl18xx_conf_init(struct wl1271 *wl, struct device *dev)
 {
+	struct platform_device *pdev = wl->pdev;
+	struct wlcore_platdev_data *pdata = dev_get_platdata(&pdev->dev);
 	struct wl18xx_priv *priv = wl->priv;
 
-	if (wl18xx_load_conf_file(dev, &wl->conf, &priv->conf) < 0) {
+	if (wl18xx_load_conf_file(dev, &wl->conf, &priv->conf,
+				  pdata->family->cfg_name) < 0) {
 		wl1271_warning("falling back to default config");
 
 		/* apply driver default configuration */
@@ -2141,4 +2143,3 @@ MODULE_PARM_DESC(num_rx_desc_param,
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
 MODULE_FIRMWARE(WL18XX_FW_NAME);
-MODULE_FIRMWARE(WL18XX_CONF_FILE_NAME);
diff --git a/drivers/net/wireless/ti/wlcore/boot.c b/drivers/net/wireless/ti/wlcore/boot.c
index f75d30444117..f00509ea8aca 100644
--- a/drivers/net/wireless/ti/wlcore/boot.c
+++ b/drivers/net/wireless/ti/wlcore/boot.c
@@ -282,6 +282,9 @@ EXPORT_SYMBOL_GPL(wlcore_boot_upload_firmware);
 
 int wlcore_boot_upload_nvs(struct wl1271 *wl)
 {
+	struct platform_device *pdev = wl->pdev;
+	struct wlcore_platdev_data *pdev_data = dev_get_platdata(&pdev->dev);
+	const char *nvs_name = "unknown";
 	size_t nvs_len, burst_len;
 	int i;
 	u32 dest_addr, val;
@@ -293,6 +296,9 @@ int wlcore_boot_upload_nvs(struct wl1271 *wl)
 		return -ENODEV;
 	}
 
+	if (pdev_data && pdev_data->family)
+		nvs_name = pdev_data->family->nvs_name;
+
 	if (wl->quirks & WLCORE_QUIRK_LEGACY_NVS) {
 		struct wl1271_nvs_file *nvs =
 			(struct wl1271_nvs_file *)wl->nvs;
@@ -310,8 +316,9 @@ int wlcore_boot_upload_nvs(struct wl1271 *wl)
 		if (wl->nvs_len != sizeof(struct wl1271_nvs_file) &&
 		    (wl->nvs_len != WL1271_INI_LEGACY_NVS_FILE_SIZE ||
 		     wl->enable_11a)) {
-			wl1271_error("nvs size is not as expected: %zu != %zu",
-				wl->nvs_len, sizeof(struct wl1271_nvs_file));
+			wl1271_error("%s size is not as expected: %zu != %zu",
+				     nvs_name, wl->nvs_len,
+				     sizeof(struct wl1271_nvs_file));
 			kfree(wl->nvs);
 			wl->nvs = NULL;
 			wl->nvs_len = 0;
@@ -328,8 +335,8 @@ int wlcore_boot_upload_nvs(struct wl1271 *wl)
 			if (nvs->general_params.dual_mode_select)
 				wl->enable_11a = true;
 		} else {
-			wl1271_error("nvs size is not as expected: %zu != %zu",
-				     wl->nvs_len,
+			wl1271_error("%s size is not as expected: %zu != %zu",
+				     nvs_name, wl->nvs_len,
 				     sizeof(struct wl128x_nvs_file));
 			kfree(wl->nvs);
 			wl->nvs = NULL;
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 9e1f2d9c9865..471521a0db7b 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -4986,7 +4986,6 @@ static int wl12xx_sta_add(struct wl1271 *wl,
 		return ret;
 
 	wl_sta = (struct wl1271_station *)sta->drv_priv;
-	wl_sta->wl = wl;
 	hlid = wl_sta->hlid;
 
 	ret = wl12xx_cmd_add_peer(wl, wlvif, sta, hlid);
@@ -6414,9 +6413,12 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
 			goto out;
 		}
 		wl->nvs_len = fw->size;
-	} else {
+	} else if (pdev_data->family->nvs_name) {
 		wl1271_debug(DEBUG_BOOT, "Could not get nvs file %s",
-			     WL12XX_NVS_NAME);
+			     pdev_data->family->nvs_name);
+		wl->nvs = NULL;
+		wl->nvs_len = 0;
+	} else {
 		wl->nvs = NULL;
 		wl->nvs_len = 0;
 	}
@@ -6511,21 +6513,29 @@ out:
 
 int wlcore_probe(struct wl1271 *wl, struct platform_device *pdev)
 {
-	int ret;
+	struct wlcore_platdev_data *pdev_data = dev_get_platdata(&pdev->dev);
+	const char *nvs_name;
+	int ret = 0;
 
-	if (!wl->ops || !wl->ptable)
+	if (!wl->ops || !wl->ptable || !pdev_data)
 		return -EINVAL;
 
 	wl->dev = &pdev->dev;
 	wl->pdev = pdev;
 	platform_set_drvdata(pdev, wl);
 
-	ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG,
-				      WL12XX_NVS_NAME, &pdev->dev, GFP_KERNEL,
-				      wl, wlcore_nvs_cb);
-	if (ret < 0) {
-		wl1271_error("request_firmware_nowait failed: %d", ret);
-		complete_all(&wl->nvs_loading_complete);
+	if (pdev_data->family && pdev_data->family->nvs_name) {
+		nvs_name = pdev_data->family->nvs_name;
+		ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG,
+					      nvs_name, &pdev->dev, GFP_KERNEL,
+					      wl, wlcore_nvs_cb);
+		if (ret < 0) {
+			wl1271_error("request_firmware_nowait failed for %s: %d",
+				     nvs_name, ret);
+			complete_all(&wl->nvs_loading_complete);
+		}
+	} else {
+		wlcore_nvs_cb(NULL, wl);
 	}
 
 	return ret;
@@ -6534,9 +6544,11 @@ EXPORT_SYMBOL_GPL(wlcore_probe);
 
 int wlcore_remove(struct platform_device *pdev)
 {
+	struct wlcore_platdev_data *pdev_data = dev_get_platdata(&pdev->dev);
 	struct wl1271 *wl = platform_get_drvdata(pdev);
 
-	wait_for_completion(&wl->nvs_loading_complete);
+	if (pdev_data->family && pdev_data->family->nvs_name)
+		wait_for_completion(&wl->nvs_loading_complete);
 	if (!wl->initialized)
 		return 0;
 
@@ -6573,4 +6585,3 @@ MODULE_PARM_DESC(no_recovery, "Prevent HW recovery. FW will remain stuck.");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
 MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
-MODULE_FIRMWARE(WL12XX_NVS_NAME);
diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index 5839acbbc782..a6e94b1a12cb 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -216,17 +216,33 @@ static struct wl1271_if_operations sdio_ops = {
 };
 
 #ifdef CONFIG_OF
+
+static const struct wilink_family_data wl127x_data = {
+	.name = "wl127x",
+	.nvs_name = "ti-connectivity/wl127x-nvs.bin",
+};
+
+static const struct wilink_family_data wl128x_data = {
+	.name = "wl128x",
+	.nvs_name = "ti-connectivity/wl128x-nvs.bin",
+};
+
+static const struct wilink_family_data wl18xx_data = {
+	.name = "wl18xx",
+	.cfg_name = "ti-connectivity/wl18xx-conf.bin",
+};
+
 static const struct of_device_id wlcore_sdio_of_match_table[] = {
-	{ .compatible = "ti,wl1271" },
-	{ .compatible = "ti,wl1273" },
-	{ .compatible = "ti,wl1281" },
-	{ .compatible = "ti,wl1283" },
-	{ .compatible = "ti,wl1801" },
-	{ .compatible = "ti,wl1805" },
-	{ .compatible = "ti,wl1807" },
-	{ .compatible = "ti,wl1831" },
-	{ .compatible = "ti,wl1835" },
-	{ .compatible = "ti,wl1837" },
+	{ .compatible = "ti,wl1271", .data = &wl127x_data },
+	{ .compatible = "ti,wl1273", .data = &wl127x_data },
+	{ .compatible = "ti,wl1281", .data = &wl128x_data },
+	{ .compatible = "ti,wl1283", .data = &wl128x_data },
+	{ .compatible = "ti,wl1801", .data = &wl18xx_data },
+	{ .compatible = "ti,wl1805", .data = &wl18xx_data },
+	{ .compatible = "ti,wl1807", .data = &wl18xx_data },
+	{ .compatible = "ti,wl1831", .data = &wl18xx_data },
+	{ .compatible = "ti,wl1835", .data = &wl18xx_data },
+	{ .compatible = "ti,wl1837", .data = &wl18xx_data },
 	{ }
 };
 
@@ -234,9 +250,13 @@ static int wlcore_probe_of(struct device *dev, int *irq,
 			   struct wlcore_platdev_data *pdev_data)
 {
 	struct device_node *np = dev->of_node;
+	const struct of_device_id *of_id;
+
+	of_id = of_match_node(wlcore_sdio_of_match_table, np);
+	if (!of_id)
+		return -ENODEV;
 
-	if (!np || !of_match_node(wlcore_sdio_of_match_table, np))
-		return -ENODATA;
+	pdev_data->family = of_id->data;
 
 	*irq = irq_of_parse_and_map(np, 0);
 	if (!*irq) {
@@ -263,7 +283,7 @@ static int wlcore_probe_of(struct device *dev, int *irq,
 static int wl1271_probe(struct sdio_func *func,
 				  const struct sdio_device_id *id)
 {
-	struct wlcore_platdev_data pdev_data;
+	struct wlcore_platdev_data *pdev_data;
 	struct wl12xx_sdio_glue *glue;
 	struct resource res[1];
 	mmc_pm_flag_t mmcflags;
@@ -275,14 +295,15 @@ static int wl1271_probe(struct sdio_func *func,
 	if (func->num != 0x02)
 		return -ENODEV;
 
-	memset(&pdev_data, 0x00, sizeof(pdev_data));
-	pdev_data.if_ops = &sdio_ops;
+	pdev_data = devm_kzalloc(&func->dev, sizeof(*pdev_data), GFP_KERNEL);
+	if (!pdev_data)
+		return -ENOMEM;
 
-	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
-	if (!glue) {
-		dev_err(&func->dev, "can't allocate glue\n");
-		goto out;
-	}
+	pdev_data->if_ops = &sdio_ops;
+
+	glue = devm_kzalloc(&func->dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		return -ENOMEM;
 
 	glue->dev = &func->dev;
 
@@ -292,16 +313,16 @@ static int wl1271_probe(struct sdio_func *func,
 	/* Use block mode for transferring over one block size of data */
 	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
 
-	ret = wlcore_probe_of(&func->dev, &irq, &pdev_data);
+	ret = wlcore_probe_of(&func->dev, &irq, pdev_data);
 	if (ret)
-		goto out_free_glue;
+		goto out;
 
 	/* if sdio can keep power while host is suspended, enable wow */
 	mmcflags = sdio_get_host_pm_caps(func);
 	dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags);
 
 	if (mmcflags & MMC_PM_KEEP_POWER)
-		pdev_data.pwr_in_suspend = true;
+		pdev_data->pwr_in_suspend = true;
 
 	sdio_set_drvdata(func, glue);
 
@@ -323,7 +344,7 @@ static int wl1271_probe(struct sdio_func *func,
 	if (!glue->core) {
 		dev_err(glue->dev, "can't allocate platform_device");
 		ret = -ENOMEM;
-		goto out_free_glue;
+		goto out;
 	}
 
 	glue->core->dev.parent = &func->dev;
@@ -341,8 +362,8 @@ static int wl1271_probe(struct sdio_func *func,
 		goto out_dev_put;
 	}
 
-	ret = platform_device_add_data(glue->core, &pdev_data,
-				       sizeof(pdev_data));
+	ret = platform_device_add_data(glue->core, pdev_data,
+				       sizeof(*pdev_data));
 	if (ret) {
 		dev_err(glue->dev, "can't add platform data\n");
 		goto out_dev_put;
@@ -358,9 +379,6 @@ static int wl1271_probe(struct sdio_func *func,
 out_dev_put:
 	platform_device_put(glue->core);
 
-out_free_glue:
-	kfree(glue);
-
 out:
 	return ret;
 }
diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index 6d24040889b8..f949ad2bd898 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -79,19 +79,19 @@
 #define WSPI_MAX_NUM_OF_CHUNKS \
 	((SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) + 1)
 
-
-struct wilink_familiy_data {
-	char name[8];
+static const struct wilink_family_data wl127x_data = {
+	.name = "wl127x",
+	.nvs_name = "ti-connectivity/wl127x-nvs.bin",
 };
 
-const struct wilink_familiy_data *wilink_data;
-
-static const struct wilink_familiy_data wl18xx_data = {
-	.name = "wl18xx",
+static const struct wilink_family_data wl128x_data = {
+	.name = "wl128x",
+	.nvs_name = "ti-connectivity/wl128x-nvs.bin",
 };
 
-static const struct wilink_familiy_data wl12xx_data = {
-	.name = "wl12xx",
+static const struct wilink_family_data wl18xx_data = {
+	.name = "wl18xx",
+	.cfg_name = "ti-connectivity/wl18xx-conf.bin",
 };
 
 struct wl12xx_spi_glue {
@@ -429,10 +429,10 @@ static struct wl1271_if_operations spi_ops = {
 };
 
 static const struct of_device_id wlcore_spi_of_match_table[] = {
-	{ .compatible = "ti,wl1271", .data = &wl12xx_data},
-	{ .compatible = "ti,wl1273", .data = &wl12xx_data},
-	{ .compatible = "ti,wl1281", .data = &wl12xx_data},
-	{ .compatible = "ti,wl1283", .data = &wl12xx_data},
+	{ .compatible = "ti,wl1271", .data = &wl127x_data},
+	{ .compatible = "ti,wl1273", .data = &wl127x_data},
+	{ .compatible = "ti,wl1281", .data = &wl128x_data},
+	{ .compatible = "ti,wl1283", .data = &wl128x_data},
 	{ .compatible = "ti,wl1801", .data = &wl18xx_data},
 	{ .compatible = "ti,wl1805", .data = &wl18xx_data},
 	{ .compatible = "ti,wl1807", .data = &wl18xx_data},
@@ -460,9 +460,9 @@ static int wlcore_probe_of(struct spi_device *spi, struct wl12xx_spi_glue *glue,
 	if (!of_id)
 		return -ENODEV;
 
-	wilink_data = of_id->data;
-	dev_info(&spi->dev, "selected chip familiy is %s\n",
-		 wilink_data->name);
+	pdev_data->family = of_id->data;
+	dev_info(&spi->dev, "selected chip family is %s\n",
+		 pdev_data->family->name);
 
 	if (of_find_property(dt_node, "clock-xtal", NULL))
 		pdev_data->ref_clock_xtal = true;
@@ -479,13 +479,15 @@ static int wlcore_probe_of(struct spi_device *spi, struct wl12xx_spi_glue *glue,
 static int wl1271_probe(struct spi_device *spi)
 {
 	struct wl12xx_spi_glue *glue;
-	struct wlcore_platdev_data pdev_data;
+	struct wlcore_platdev_data *pdev_data;
 	struct resource res[1];
 	int ret;
 
-	memset(&pdev_data, 0x00, sizeof(pdev_data));
+	pdev_data = devm_kzalloc(&spi->dev, sizeof(*pdev_data), GFP_KERNEL);
+	if (!pdev_data)
+		return -ENOMEM;
 
-	pdev_data.if_ops = &spi_ops;
+	pdev_data->if_ops = &spi_ops;
 
 	glue = devm_kzalloc(&spi->dev, sizeof(*glue), GFP_KERNEL);
 	if (!glue) {
@@ -509,7 +511,7 @@ static int wl1271_probe(struct spi_device *spi)
 		return PTR_ERR(glue->reg);
 	}
 
-	ret = wlcore_probe_of(spi, glue, &pdev_data);
+	ret = wlcore_probe_of(spi, glue, pdev_data);
 	if (ret) {
 		dev_err(glue->dev,
 			"can't get device tree parameters (%d)\n", ret);
@@ -522,7 +524,7 @@ static int wl1271_probe(struct spi_device *spi)
 		return ret;
 	}
 
-	glue->core = platform_device_alloc(wilink_data->name,
+	glue->core = platform_device_alloc(pdev_data->family->name,
 					   PLATFORM_DEVID_AUTO);
 	if (!glue->core) {
 		dev_err(glue->dev, "can't allocate platform_device\n");
@@ -543,8 +545,8 @@ static int wl1271_probe(struct spi_device *spi)
 		goto out_dev_put;
 	}
 
-	ret = platform_device_add_data(glue->core, &pdev_data,
-				       sizeof(pdev_data));
+	ret = platform_device_add_data(glue->core, pdev_data,
+				       sizeof(*pdev_data));
 	if (ret) {
 		dev_err(glue->dev, "can't add platform data\n");
 		goto out_dev_put;
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index 8f28aa02230c..1827546ba807 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -501,6 +501,9 @@ struct wl1271 {
 
 	/* dynamic fw traces */
 	u32 dynamic_fw_traces;
+
+	/* time sync zone master */
+	u8 zone_master_mac_addr[ETH_ALEN];
 };
 
 int wlcore_probe(struct wl1271 *wl, struct platform_device *pdev);
diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h
index 242b4e37b94c..e840985385fc 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -35,12 +35,11 @@
 #include "conf.h"
 #include "ini.h"
 
-/*
- * wl127x and wl128x are using the same NVS file name. However, the
- * ini parameters between them are different.  The driver validates
- * the correct NVS size in wl1271_boot_upload_nvs().
- */
-#define WL12XX_NVS_NAME "ti-connectivity/wl1271-nvs.bin"
+struct wilink_family_data {
+	const char *name;
+	const char *nvs_name;	/* wl12xx nvs file */
+	const char *cfg_name;	/* wl18xx cfg file */
+};
 
 #define WL1271_TX_SECURITY_LO16(s) ((u16)((s) & 0xffff))
 #define WL1271_TX_SECURITY_HI32(s) ((u32)(((s) >> 16) & 0xffffffff))
@@ -208,6 +207,7 @@ struct wl1271_if_operations {
 
 struct wlcore_platdev_data {
 	struct wl1271_if_operations *if_ops;
+	const struct wilink_family_data *family;
 
 	bool ref_clock_xtal;	/* specify whether the clock is XTAL or not */
 	u32 ref_clock_freq;	/* in Hertz */
@@ -347,7 +347,6 @@ struct wl1271_station {
 	 * Used in both AP and STA mode.
 	 */
 	u64 total_freed_pkts;
-	struct wl1271 *wl;
 };
 
 struct wl12xx_vif {