wlcore: use new set bandwidth command to adjusting channel BW

We support changing the channel BW when we started the STA role on
a 40Mhz bandwidth. Otherwise a reconnection is required.
Save the started channel width and use it when channel width updates
arrive.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

3 files changed, 83 insertions, 0 deletions

diff --git a/drivers/net/wireless/ti/wl18xx/acx.c b/drivers/net/wireless/ti/wl18xx/acx.c
index adff9cde7db7..801d8af5cef2 100644
--- a/drivers/net/wireless/ti/wl18xx/acx.c
+++ b/drivers/net/wireless/ti/wl18xx/acx.c
@@ -109,3 +109,34 @@ out:
 	kfree(acx);
 	return ret;
 }
+
+int wl18xx_acx_peer_ht_operation_mode(struct wl1271 *wl, u8 hlid, bool wide)
+{
+	struct wlcore_peer_ht_operation_mode *acx;
+	int ret;
+
+	wl1271_debug(DEBUG_ACX, "acx peer ht operation mode hlid %d bw %d",
+		     hlid, wide);
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->hlid = hlid;
+	acx->bandwidth = wide ? WLCORE_BANDWIDTH_40MHZ : WLCORE_BANDWIDTH_20MHZ;
+
+	ret = wl1271_cmd_configure(wl, ACX_PEER_HT_OPERATION_MODE_CFG, acx,
+				   sizeof(*acx));
+
+	if (ret < 0) {
+		wl1271_warning("acx peer ht operation mode failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+
+}
diff --git a/drivers/net/wireless/ti/wl18xx/acx.h b/drivers/net/wireless/ti/wl18xx/acx.h
index 394d12500834..b57e3483509d 100644
--- a/drivers/net/wireless/ti/wl18xx/acx.h
+++ b/drivers/net/wireless/ti/wl18xx/acx.h
@@ -284,10 +284,24 @@ struct wl18xx_acx_clear_statistics {
 	struct acx_header header;
 };
 
+enum wlcore_bandwidth {
+	WLCORE_BANDWIDTH_20MHZ,
+	WLCORE_BANDWIDTH_40MHZ,
+};
+
+struct wlcore_peer_ht_operation_mode {
+	struct acx_header header;
+
+	u8 hlid;
+	u8 bandwidth; /* enum wlcore_bandwidth */
+	u8 padding[2];
+};
+
 int wl18xx_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap,
 				  u32 sdio_blk_size, u32 extra_mem_blks,
 				  u32 len_field_size);
 int wl18xx_acx_set_checksum_state(struct wl1271 *wl);
 int wl18xx_acx_clear_statistics(struct wl1271 *wl);
+int wl18xx_acx_peer_ht_operation_mode(struct wl1271 *wl, u8 hlid, bool wide);
 
 #endif /* __WL18XX_ACX_H__ */
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index c015231d295f..c616c21bd6b7 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -1319,6 +1319,43 @@ static u32 wl18xx_pre_pkt_send(struct wl1271 *wl,
 	return buf_offset;
 }
 
+static void wl18xx_sta_rc_update(struct wl1271 *wl,
+				 struct wl12xx_vif *wlvif,
+				 struct ieee80211_sta *sta,
+				 u32 changed)
+{
+	bool wide = sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+
+	wl1271_debug(DEBUG_MAC80211, "mac80211 sta_rc_update wide %d", wide);
+
+	if (!(changed & IEEE80211_RC_BW_CHANGED))
+		return;
+
+	mutex_lock(&wl->mutex);
+
+	/* sanity */
+	if (WARN_ON(wlvif->bss_type != BSS_TYPE_STA_BSS))
+		goto out;
+
+	/* ignore the change before association */
+	if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags))
+		goto out;
+
+	/*
+	 * If we started out as wide, we can change the operation mode. If we
+	 * thought this was a 20mhz AP, we have to reconnect
+	 */
+	if (wlvif->sta.role_chan_type == NL80211_CHAN_HT40MINUS ||
+	    wlvif->sta.role_chan_type == NL80211_CHAN_HT40PLUS)
+		wl18xx_acx_peer_ht_operation_mode(wl, wlvif->sta.hlid, wide);
+	else
+		ieee80211_connection_loss(wl12xx_wlvif_to_vif(wlvif));
+
+out:
+	mutex_unlock(&wl->mutex);
+}
+
+
 static int wl18xx_setup(struct wl1271 *wl);
 
 static struct wlcore_ops wl18xx_ops = {
@@ -1354,6 +1391,7 @@ static struct wlcore_ops wl18xx_ops = {
 	.set_key	= wl18xx_set_key,
 	.channel_switch	= wl18xx_cmd_channel_switch,
 	.pre_pkt_send	= wl18xx_pre_pkt_send,
+	.sta_rc_update	= wl18xx_sta_rc_update,
 };
 
 /* HT cap appropriate for wide channels in 2Ghz */