rtlwifi: Move common routines to core

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

5 files changed, 10 insertions, 52 deletions

diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/Makefile b/drivers/net/wireless/rtlwifi/rtl8723be/Makefile
index 4a75aab0539a..59e416abd93a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/Makefile
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/Makefile
@@ -8,7 +8,6 @@ rtl8723be-objs :=		\
 		led.o		\
 		phy.o		\
 		pwrseq.o	\
-		pwrseqcmd.o	\
 		rf.o		\
 		sw.o		\
 		table.o		\
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
index a500d266fae5..fc2af714e9ec 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
@@ -39,7 +39,6 @@
 #include "../rtl8723com/fw_common.h"
 #include "led.h"
 #include "hw.h"
-#include "pwrseqcmd.h"
 #include "pwrseq.h"
 #include "../btcoexist/rtl_btc.h"
 
@@ -818,9 +817,9 @@ static bool _rtl8723be_init_mac(struct ieee80211_hw *hw)
 		mac_func_enable = false;
 
 	/* HW Power on sequence */
-	if (!rtlbe_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK,
-					PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,
-					RTL8723_NIC_ENABLE_FLOW)) {
+	if (!rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK,
+				      PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,
+				      RTL8723_NIC_ENABLE_FLOW)) {
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
 			 "init MAC Fail as power on failure\n");
 		return false;
@@ -1309,8 +1308,8 @@ static void _rtl8723be_poweroff_adapter(struct ieee80211_hw *hw)
 
 	/* Combo (PCIe + USB) Card and PCIe-MF Card */
 	/* 1. Run LPS WL RFOFF flow */
-	rtlbe_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
-				   PWR_INTF_PCI_MSK, RTL8723_NIC_LPS_ENTER_FLOW);
+	rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+				 PWR_INTF_PCI_MSK, RTL8723_NIC_LPS_ENTER_FLOW);
 
 	/* 2. 0x1F[7:0] = 0 */
 	/* turn off RF */
@@ -1328,8 +1327,8 @@ static void _rtl8723be_poweroff_adapter(struct ieee80211_hw *hw)
 	rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00);
 
 	/* HW card disable configuration. */
-	rtlbe_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
-				   PWR_INTF_PCI_MSK, RTL8723_NIC_DISABLE_FLOW);
+	rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+				 PWR_INTF_PCI_MSK, RTL8723_NIC_DISABLE_FLOW);
 
 	/* Reset MCU IO Wrapper */
 	u1b_tmp = rtl_read_byte(rtlpriv, REG_RSV_CTRL + 1);
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/phy.c b/drivers/net/wireless/rtlwifi/rtl8723be/phy.c
index ebc1e2788fca..cadae9bc4e3f 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/phy.c
@@ -26,6 +26,7 @@
 #include "../wifi.h"
 #include "../pci.h"
 #include "../ps.h"
+#include "../core.h"
 #include "reg.h"
 #include "def.h"
 #include "phy.h"
@@ -41,9 +42,6 @@ static bool _rtl8723be_phy_config_bb_with_pgheaderfile(struct ieee80211_hw *hw,
 static bool rtl8723be_phy_sw_chn_step_by_step(struct ieee80211_hw *hw,
 					      u8 channel, u8 *stage,
 					      u8 *step, u32 *delay);
-static void _rtl8723be_config_bb_reg(struct ieee80211_hw *hw,
-				     u32 addr, u32 data);
-
 static bool _rtl8723be_check_condition(struct ieee80211_hw *hw,
 				       const u32  condition)
 {
@@ -114,7 +112,7 @@ static bool _rtl8723be_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
 			v1 = array_table[i];
 			v2 = array_table[i+1];
 			if (v1 < 0xcdcdcdcd) {
-				_rtl8723be_config_bb_reg(hw, v1, v2);
+				rtl_bb_delay(hw, v1, v2);
 			} else {/*This line is the start line of branch.*/
 				if (!_rtl8723be_check_condition(hw, array_table[i])) {
 					/*Discard the following (offset, data) pairs*/
@@ -135,7 +133,7 @@ static bool _rtl8723be_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
 					       v2 != 0xCDEF &&
 					       v2 != 0xCDCD &&
 					       i < arraylen - 2) {
-						_rtl8723be_config_bb_reg(hw,
+						rtl_bb_delay(hw,
 								    v1, v2);
 						READ_NEXT_PAIR(v1, v2, i);
 					}
@@ -389,27 +387,6 @@ static void _rtl8723be_phy_init_tx_power_by_rate(struct ieee80211_hw *hw)
 						[path][txnum][section] = 0;
 }
 
-static void _rtl8723be_config_bb_reg(struct ieee80211_hw *hw,
-				     u32 addr, u32 data)
-{
-	if (addr == 0xfe) {
-		mdelay(50);
-	} else if (addr == 0xfd) {
-		mdelay(5);
-	} else if (addr == 0xfc) {
-		mdelay(1);
-	} else if (addr == 0xfb) {
-		udelay(50);
-	} else if (addr == 0xfa) {
-		udelay(5);
-	} else if (addr == 0xf9) {
-		udelay(1);
-	} else {
-		rtl_set_bbreg(hw, addr, MASKDWORD, data);
-		udelay(1);
-	}
-}
-
 static void phy_set_txpwr_by_rate_base(struct ieee80211_hw *hw, u8 band,
 				       u8 path, u8 rate_section,
 				       u8 txnum, u8 value)
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h
index 960b408216df..a62f43ed8d32 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.h
@@ -26,7 +26,6 @@
 #ifndef __RTL8723BE_PWRSEQ_H__
 #define __RTL8723BE_PWRSEQ_H__
 
-#include "pwrseqcmd.h"
 /*	Check document WM-20130425-JackieLau-RTL8723B_Power_Architecture v05.vsd
  *	There are 6 HW Power States:
  *	0: POFF--Power Off
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/reg.h b/drivers/net/wireless/rtlwifi/rtl8723be/reg.h
index 65221e678230..4c653fab8795 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/reg.h
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/reg.h
@@ -2242,22 +2242,6 @@
 #define	BWORD1	0xc
 #define	BWORD	0xf
 
-#define	MASKBYTE0	0xff
-#define	MASKBYTE1	0xff00
-#define	MASKBYTE2	0xff0000
-#define	MASKBYTE3	0xff000000
-#define	MASKHWORD	0xffff0000
-#define	MASKLWORD	0x0000ffff
-#define	MASKDWORD			0xffffffff
-#define	MASK12BITS			0xfff
-#define	MASKH4BITS			0xf0000000
-#define MASKOFDM_D			0xffc00000
-#define	MASKCCK				0x3f3f3f3f
-
-#define	MASK4BITS		0x0f
-#define	MASK20BITS		0xfffff
-#define RFREG_OFFSET_MASK		0xfffff
-
 #define	BENABLE	0x1
 #define	BDISABLE	0x0